Posts by derBG

The Coolest

Wow what a support. Thank you very much

The Coolest

I've played something with the image 8.90.5. Some things are buggy. So i went to 8.2.2.3. Can you modify the attached dtb? You said mappings of vfd are not correct that the display can work. How you edit a dtb?

Thanks in advance

The Coolest

Set to 1000M half duplex produces the same failure as full duplex

The Android system on the box seems to be not the best. Some bugs. Laggy and so on.

The Coolest

------------------------------------------------------------
Client connecting to 10.0.0.171, TCP port 5001
TCP window size: 85.0 KByte (default)
------------------------------------------------------------
[  3] local 10.0.0.240 port 51612 connected with 10.0.0.171 port 5001
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-10.0 sec   667 MBytes   559 Mbits/sec

It seems to work well for so a little box. Not full Gbit but better than 100Mbit

boot2k3

with the gxm_q200_3g.dtb no difference.

The Coolest

Thank you very much. Your attached file works for the display problem.

The ethernet is still buggy. I the workaround in my first post to set it to 100Mbit.

Do you think it is a software with the DBT or coud it be a hardware fault? Buggy chip design that prevents the Gbit connection?

Thanks in advance

derBG

Hello,

why do you dont look for a little synology or qnap nas for your use case?

Hello guys,

i have a Sunvell t95z Plus with 3/32Gb and a few problems with it.

I have installed the following on a microSD Card:

LibreELEC-S912.arm-8.90.5.img.gz

gxm_q200_3g_t95z.dtb

The problems are:

1. Gbit ethernet is not working properly. Connection is etablished but no traffic goes over the line.

2. The display in the front is not working.

-> Fixed DTB in post #3. Thanks to The Coolest

My actually workarounds are:

1. Connect the Box over Wifi with the LAN. Connect over SSH into the sweet little box and

echo 'ethtool -s eth0 speed 100 duplex full' >> /storage/.config/autostart.sh

this sets the network to 100Mbit which works.

I tried to install the fd628 addon, the display dont work

I also tried some fd628 dev builds, also not working

/proc/device-tree/fd628_dev/ is present

I have generated a keymap file for the t95z remote control. See Attachment

Its strange that the 1Gbit Connection is so faulty.

I hope someone other have this box and can help.

In ARMbian and ARCHlinux the same problems with the ethernet.

Cheers

derBG