fixed it now thanks DaVu I wouldn't have done it with out your help..
I made a file in config
#!/bin/sh
xrandr --output LVDS1 --off
and saved it as
autostart.sh
I saved it without - vi
works perfect thanks again
fixed it now thanks DaVu I wouldn't have done it with out your help..
I made a file in config
#!/bin/sh
xrandr --output LVDS1 --off
and saved it as
autostart.sh
I saved it without - vi
works perfect thanks again
ok so here what I did
I ssh in too my laptop
navigated to cd .config
typed in nano
then made a file
#!/bin/sh
xrandr --output LVDS1 --off
and saved it as
- vi autostart.sh
restarted it and nothing has changed
I then edited the file name and saved it with out the - at the start
as in vi autostart.sh
tried restarting it and seems to be stuck on a loop black screen so I reinstalled and back with the half screen display
noob question how do I make the nano file
thanks again
thanks again
so the FN buttons don't work
however there's light at the end of the tunnel
when I use this command "xrandr --output LVDS1 --off"
I get full screen although the display looks like inverted colours
Then when I use this command after it "systemctl restart kodi"
and everything looks fine full screen working fine.
but when I restart the laptop it goes back too small screen again
is there a way of saving it too full screen setting so I don't have too keep putting in
xrandr --output LVDS1 --off
systemctl restart kodi
thanks for the reply
here's what I got .
LibreELEC:~ # xrandr | pastebinit
LibreELEC:~ # xrandr
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
LVDS1 connected primary 1280x1024+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
1280x1024 59.68*+
1280x960 60.00
1152x864 60.00
1024x768 60.00
800x600 60.32 56.25
640x512 60.00
640x480 59.94
VGA1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 700mm x 390mm
1920x1080 59.93*+
1400x1050 59.94
1280x1024 60.02
1024x768 75.03 70.07 60.00
832x624 74.55
800x600 75.00 60.32
640x480 75.00 59.94
720x400 70.08
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
LibreELEC:~ #
hi all
I have two small laptops with LE 8.2.3 on the two them
one is an aspire one D225 works no problems on two different TV's
The other laptop is A Toshiba NB 500-115
when I Connect this laptop TV Through Serial Port I am only getting half screen
its not the TV as I have the same problem on two different TV makes
is there a command I can type in too fix this
any help would be grate
thanks