Posts by atirage21

atirage21

There is some ssh commands for identifing reasons ? And is possible enable wol in dtb tree for device Radxa Rock 5b+ ? This device dont have wakeup through cec hdmi and wakeup usb is not going. WoI would be good alternative for this. Thank you.

LibreELEC:~ # ethtool eth0
Settings for eth0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
2500baseT/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
2500baseT/Full
Advertised pause frame use: Symmetric Receive-only
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Link partner advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Link partner advertised pause frame use: Symmetric Receive-only
Link partner advertised auto-negotiation: Yes
Link partner advertised FEC modes: Not reported
Speed: 1000Mb/s
Duplex: Full
Auto-negotiation: on
master-slave cfg: preferred slave
master-slave status: slave
Port: Twisted Pair
PHYAD: 0
Transceiver: internal
MDI-X: Unknown
Supports Wake-on: pumbg
Wake-on: g
Link detected: yes

atirage21 · log-2026-09-10-09.26.46.zip

Dmesg log from last testing build at device Radxa Rock 5b+ with RK 3588 from 1. september (for sure was disconnected nvme Apacer and booted only from sd card)

https://paste.libreelec.tv/legginged-deegan.log

For example, playing of DVD is issue (not play, only error and system freezing). Compare to nightly build it need skip first scene, what is only temporary solution for going to dvd menu, but movie was again not started and whole system freezed (playing of audio cd is OK):

https://paste.libreelec.tv/jammy-vanesa.log

https://paste.libreelec.tv/palmiest-rashida.log

https://paste.libreelec.tv/subdiapasonic-lailah.log

Also device have still turn off issue, because after turn off stayed at screen:

atirage21 · LE13 on Radxa ROCK 5B+ atirage21 September 6, 2026 at 7:11 AM

I wrote and sent logs from beta testing build which had turn off issue. Through AI i found some files which was updated last time for rockchips: https://github.com/rockchip-linux…se/RK3588_EN.md

In repo of libreelec i saw only 6y old rkbin: https://github.com/LibreELEC/rkbin-extra

atirage21 · LE13 on Radxa ROCK 5B+ atirage21 August 27, 2026 at 4:45 PM

Only for information about HW from Linux version 6.19.0 (ubuntu@843dd3320e8b) (aarch64-libreelec-linux-gnu-gcc-16.2.0 (GCC) 16.2.0, GNU ld (GNU Binutils) 2.47.20260726) #1 SMP Wed Aug 26 04:19:44 UTC 2026; Machine model: Radxa ROCK 5B+ :

Code

LibreELEC:~ # echo "Cortex-A55 (cpu0): $(cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies)"
Cortex-A55 (cpu0): 1008000 1200000 1416000 1608000 1800000
LibreELEC:~ # echo "Cortex-A76 (cpu4): $(cat /sys/devices/system/cpu/cpu4/cpufreq/scaling_available_frequencies)"
Cortex-A76 (cpu4): 1200000 1416000 1608000 1800000 2016000 2208000 2400000
LibreELEC:~ # > type=$(cat $zone/type)
> echo "$type: ${temp}°C"
> done
package-thermal: 48°C
bigcore0-thermal: 48°C
bigcore2-thermal: 48°C
littlecore-thermal: 48°C
center-thermal: 47°C
gpu-thermal: 47°C
npu-thermal: 48°C
LibreELEC:~ # lscpu
Architecture: aarch64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 8
On-line CPU(s) list: 0-7
Vendor ID: ARM
Model name: Cortex-A55
Model: 0
Thread(s) per core: 1
Core(s) per socket: 4
Socket(s): 1
Stepping: r2p0
Frequency boost: disabled
CPU(s) scaling MHz: 100%
CPU max MHz: 1800.0000
CPU min MHz: 1008.0000
BogoMIPS: 48.00
Flags: fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm lrcpc dcpop asimddp
Model name: Cortex-A76
Model: 0
Thread(s) per core: 1
Core(s) per socket: 4
Socket(s): 1
Stepping: r4p0
CPU(s) scaling MHz: 50%
CPU max MHz: 2400.0000
CPU min MHz: 1200.0000
BogoMIPS: 48.00
Flags: fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm lrcpc dcpop asimddp
Caches (sum of all):
L1d: 384 KiB (8 instances)
L1i: 384 KiB (8 instances)
L2: 2.5 MiB (8 instances)
L3: 3 MiB (1 instance)
Vulnerabilities:
Gather data sampling: Not affected
Ghostwrite: Not affected
Indirect target selection: Not affected
Itlb multihit: Not affected
L1tf: Not affected
Mds: Not affected
Meltdown: Not affected
Mmio stale data: Not affected
Old microcode: Not affected
Reg file data sampling: Not affected
Retbleed: Not affected
Spec rstack overflow: Not affected
Spec store bypass: Mitigation; Speculative Store Bypass disabled via prctl
Spectre v1: Mitigation; __user pointer sanitization
Spectre v2: Vulnerable: Unprivileged eBPF enabled
Srbds: Not affected
Tsa: Not affected
Tsx async abort: Not affected
Vmscape: Not affected
LibreELEC:~ # cat /sys/kernel/debug/clk/clk_summary | grep -Ei "gpu|vpu|vdpu|vepu|dmc|ddr"
scmi_clk_gpu 0 0 0 300000000 0 0 50000 Y deviceless no_connection_id
scmi_clk_ddr 0 0 0 0 0 0 50000 Y deviceless no_connection_id
clk_ddr_cm0_rtc 1 1 0 32768 0 0 50000 Y deviceless no_connection_id
clk_ddr_fail_safe 0 0 0 24000000 0 0 50000 Y deviceless no_connection_id
clk_gpu_pvtm 0 0 0 24000000 0 0 50000 N deviceless no_connection_id
tclk_wdt_ddr 0 0 0 24000000 0 0 50000 N deviceless no_connection_id
clk_ddr_timer_root 0 0 0 24000000 0 0 50000 Y deviceless no_connection_id
clk_ddr_timer1 0 0 0 24000000 0 0 50000 N deviceless no_connection_id
clk_ddr_timer0 0 0 0 24000000 0 0 50000 N deviceless no_connection_id
aclk_vdpu_low_root 1 2 0 396000000 0 0 50000 Y power-domain@21 no_connection_id
aclk_vdpu_low_pre 1 6 0 396000000 0 0 50000 Y deviceless no_connection_id
aclk_vpu 2 4 0 396000000 0 0 50000 Y fdb50000.video-codec aclk
fclk_ddr_cm0_core 1 1 0 396000000 0 0 50000 Y deviceless no_connection_id
hclk_vdpu_root 4 16 0 198000000 0 0 50000 Y power-domain@23 no_connection_id
hclk_vpu 2 4 0 198000000 0 0 50000 Y fdb50000.video-codec hclk
pclk_dma2ddr 1 1 0 198000000 0 0 50000 Y deviceless no_connection_id
clk_gpu_src 3 3 0 300000000 0 0 50000 Y deviceless no_connection_id
clk_core_gpu_pvtm 0 0 0 300000000 0 0 50000 N deviceless no_connection_id
clk_gpu_stacks 2 3 0 300000000 0 0 50000 Y fb000000.gpu stacks
gpu@fb000000 no_connection_id
clk_gpu_coregroup 2 3 0 300000000 0 0 50000 Y fb000000.gpu coregroup
gpu@fb000000 no_connection_id
clk_gpu 2 3 0 300000000 0 0 50000 Y fb000000.gpu no_connection_id
fb000000.gpu no_connection_id
gpu@fb000000 no_connection_id
aclk_vdpu_root 5 10 0 750000000 0 0 50000 Y power-domain@21 no_connection_id
aclk_ddr_sharemem 1 1 0 500000000 0 0 50000 Y deviceless no_connection_id
pclk_ddrcm0_intmux 1 1 0 100000000 0 0 50000 Y deviceless no_connection_id
aclk_dma2ddr 1 1 0 702000000 0 0 50000 Y deviceless no_connection_id
LibreELEC:~ # > echo "Zariadenie: $(basename $dev)"
> echo " Minimálna: $(cat $dev/min_freq 2>/dev/null) Hz"
> echo " Maximálna: $(cat $dev/max_freq 2>/dev/null) Hz"
> echo " Governor: $(cat $dev/governor 2>/dev/null)"
> done
Zariadenie: fb000000.gpu
Aktualna: 300000000 Hz
Minimálna: 300000000 Hz
Maximálna: 1000000000 Hz
Governor: simple_ondemand
-sh: Zariadenie: fb000000.gpu: not found

Recommendations from AI gemini:

1. Core Settings Add-on (service.libreelec.settings)

    Issue: Focus navigation failure on Control 1000 (window 13001) caused by a malformed JSONRPC type definition (Setting.Details.SettingList).

    Action: Update Python API bindings in service.libreelec.settings to align with Kodi 22 RPC schema changes.

2. Missing XKB / Locale Definitions

    Issue: XKB Compose table compilation fails due to missing en_US.UTF-8 locale definitions and an uncreated /storage/.config/xkb path.

    Action: Bundle default locale files and pre-create the /storage/.config/xkb directory structure in the LibreELEC buildroot target image.

3. Audio Subsystem Initialization (ALSA/PulseAudio)

    Issue: Log reports load failure for module-allow-passthrough, triggering an unexpected audio output fallback from the internal rk3588es8316 codec to hdmi0.

    Action: Refactor default.pa / ALSA configuration for RK3588 targets to prevent loading unavailable passthrough modules on the ALSA layer.

4. Mainline Kernel Device Tree (DTS) — DMC / RAM Scaling

    Issue: devfreq only exposes the GPU (fb000000.gpu). The scmi_clk_ddr node reports 0 Hz, leaving the Dynamic Memory Controller (DMC) without active DVFS scaling in kernel space.

    Action: Mainline missing SCMI and DMC nodes along with proper clock bindings in the RK3588 kernel Device Tree.

5. SATA/ATAPI Optical Drive Handling (/dev/sr0)

    Issue: dll_ioctl I/O error (code 5) occurs when reading sector VIDEO_TS.IFO, breaking libdvdread and forcing DVD media misdetection as an 18-track Audio CD.

    Action: Patch the RK3588 PCIe-AHCI driver to ensure correct SCSI/ATAPI command execution and error handling for optical drives.

6. Kernel Hardening — eBPF Security Mitigation

    Issue: Spectre v2 mitigation check reports Vulnerable: Unprivileged eBPF enabled.

    Action: Set CONFIG_BPF_UNPRIV_DEFAULT_OFF=y in the LibreELEC RK3588 kernel defconfig to restrict unprivileged eBPF access.

Display More

atirage21 · log-2026-08-22-08.56.15.zip

After 2 minutes playing of neflix at nightly build of LE13 with disabed drm prime are also issues.

https://paste.libreelec.tv/petalous-camron.log

atirage21 · LE13 on Radxa ROCK 5B+ atirage21 August 22, 2026 at 3:00 AM

According to AI Gemini is the reason for "turn -off issue" this error: rockchip-pm-domain ... Failed to create device link (0x180) with supplier 1-0042 which is connected with regulator fan53555

Recommendation for Kernel Maintainer from AI Gemini:

The boot logs highlight a probe ordering (race condition) issue on the Radxa Rock 5B+ (RK3588) running kernel 7.2.0. The rockchip-pm-domain driver attempts to establish device links before the corresponding PMIC suppliers are fully registered:

Failed to create device link (0x180) with supplier 1-0042 for power-domain@8 (I2C FAN53555 regulator)
Failed to create device link (0x180) with supplier spi2.0 for power-domain@12 (Main SPI PMIC)

Suggested Mitigation: Adjust probe dependency ordering or ensure proper probe deferral within the rockchip-pm-domain driver and power controller subsystem. The power-domain controller must defer initialization until the required suppliers (spi2.0 and I2C devices) complete their registration, preventing missing device links that break system shutdown and suspend states.

atirage21 · log-2026-08-21-16.24.02.zip

And in case of problematic h264 local files (ff-mpeg4-drm_prime (SW)) with ativated drm prime and Direct to plane is not playing video:

https://paste.libreelec.tv/branchiostegous-kindra.log

Code

[  125.938972] rockchip-drm display-subsystem: [drm] *ERROR* POST_BUF_EMPTY irq err at vp0
[  125.939029] rockchip-drm display-subsystem: [drm] *ERROR* POST_BUF_EMPTY irq err at vp0
[  125.939053] rockchip-drm display-subsystem: [drm] *ERROR* POST_BUF_EMPTY irq err at vp0
[  125.939077] rockchip-drm display-subsystem: [drm] *ERROR* POST_BUF_EMPTY irq err at vp0
[  125.939100] rockchip-drm display-subsystem: [drm] *ERROR* POST_BUF_EMPTY irq err at vp0
[  125.939123] rockchip-drm display-subsystem: [drm] *ERROR* POST_BUF_EMPTY irq err at vp0
[  125.939145] rockchip-drm display-subsystem: [drm] *ERROR* POST_BUF_EMPTY irq err at vp0
[  125.939168] rockchip-drm display-subsystem: [drm] *ERROR* POST_BUF_EMPTY irq err at vp0
[  125.939190] rockchip-drm display-subsystem: [drm] *ERROR* POST_BUF_EMPTY irq err at vp0
[  125.939213] rockchip-drm display-subsystem: [drm] *ERROR* POST_BUF_EMPTY irq err at vp0
[  129.258998] sched: DL replenish lagged too much
[  130.943985] vop2_isr: 729766 callbacks suppressed

[   63.553623] panthor fb000000.gpu: [drm] Firmware protected mode entry is not supported, ignoring
[   63.555403] panthor fb000000.gpu: [drm] Firmware git sha: 95a25d71030715381f33105394285e1dcc860a65 
[   63.560149] panthor fb000000.gpu: [drm] CSF FW using interface v1.5.0, Features 0x0 Instrumentation features 0x71
[   63.560453] panthor fb000000.gpu: [drm] Using Transparent Hugepage

Display More

If i changed direct to plane to egl, again is going with drm_prime also ...same behaviour as at LE13.

atirage21

Turning offf issue at Radxa rock 5b+:

Post

RE: LE13 on Radxa ROCK 5B+

[…]

In code "error" denotes a code path ending. In some cases that it represents a fatal problem. In others it represents nothing more than reaching the end of a branch in some form of logic or decision tree. In this case the content is not interlaced hence opening the deinterlace filter (correctly) errors and playback continues.

Please repeat tests on the current dev image from my test share. I have little interest in current Rockchip nightlies as they use older kernel drivers and ffmpeg, etc.

chewitt

August 21, 2026 at 7:20 AM

https://paste.libreelec.tv/uninvocative-anissa.log

https://paste.libreelec.tv/nonforgiving-marjory.log

atirage21 · LE13 on Radxa ROCK 5B+ atirage21 August 21, 2026 at 3:52 PM

OK, but there firstly i tested only as fresh install,... and i see big issue with turning off, which is freezing at black screen with title of build. Only after succesfully solution of turning off i will going to reinstall nightly build to development build.

https://paste.libreelec.tv/uninvocative-anissa.log

https://paste.libreelec.tv/nonforgiving-marjory.log

atirage21 · LE13 on Radxa ROCK 5B+ atirage21 August 21, 2026 at 3:33 AM

With h264 in neflix are video not playing if is activated DRM Prime, If are av1 videos, then is playing with green artefacts.

https://paste.libreelec.tv/irrelievable-esme.log

https://paste.libreelec.tv/unmollifying-patience.log

https://paste.libreelec.tv/oafish-genevie.log

Code

2026-07-26 16:44:31.885 T:1760    error <general>: CDVDVideoCodecDRMPRIME::FilterOpen - avfilter_graph_config:  Invalid argument (-22)

EDIT: after 2 minutes of playing of netflix is stoped video (audio and subtitles are going ok without video in gray colors) if was drm prime disabled.
https://paste.libreelec.tv/petalous-camron.log

atirage21 · LE13 on Radxa ROCK 5B+ atirage21 August 15, 2026 at 3:59 AM

Playing local h264 was solved with change direct to plane to setting of EGL. But for playing Netlix i have turn off whole DRM Prime.

atirage21

At my device i have kernel 6.19 with last builds: https://paste.libreelec.tv/islandish-vernice.log

atirage21

Quote from chewitt

I've pushed revised RK3288/RK3328/RK3399/ RK356X/RK3576/RK3588 images to my test share. The main change is a kernel bump to Linux 7.2 with the latest usable iterations of the many patch series that go into current images. Of particular note: older Rockchip hardware is now using the same kernel as newer hardware since Kwiboo has been reworking old bit-rotten patches that broke and reworked patches are slowly being upstreamed.
However !!! WARNING !!! .. I'm on vacation with zero access to hardware so the images are compile tested only, and a few large G&T's have assisted some of the patch wrangling. What could possibly go wrong?
I'd advise taking a backup of KERNEL/SYSTEM before updating in case I messed things up and you need to roll back. I've not kept up with patches since Linux 6.19 so I'm half expecting some feature differences somewhere if I've missed things. Reports of success or failure (or feature completeness etc.) are appreciated.

And where are published these testing builds ?

atirage21 · LE13 on Radxa ROCK 5B+ atirage21 August 13, 2026 at 3:33 AM

Device is booting and going at nvme with spi 2.0 from armbian. Only new information, maybe is everyday for rockchips.

If is enabled drm prime then is netflix video not played. Tested also at last build from 12. august 2026.

https://paste.libreelec.tv/sejant-roberta.log

atirage21

Kernel 7.3 have improvements for gpu at arm64 systems.

[GIT PULL] DRM Rust changes for v7.3-rc1 - Danilo Krummrich

Code

- Tyr:

  - Firmware loading and MCU boot:
    - Add a generic slot manager for dynamically allocating limited
      hardware slots to software seats, with lazy eviction under
      contention.
    - Add MMU support wrapping the slot manager for address-space slot
      allocation, with MAIR-to-MEMATTR translation.
    - Add GPU virtual memory (VM) support using drm_gpuvm with ARM64
      LPAE Stage 1 page tables and 4KB/2MB page sizes.
    - Add a kernel buffer object type for internal driver allocations.
    - Add a parser for the Mali CSF firmware binary format.
    - Add MCU booting: load, parse, and map firmware sections into VM,
      then boot the MCU at probe().

Display More

atirage21 · Flatpak and RetroArch atirage21 August 3, 2026 at 3:30 AM

I tried as cleab install and is missing kernels after also donwnloads throung online updates. It is maybe about rights of writing and reading of files in this flatpak (this sandbox solution is not good for RA at small boxes). Also is missing support for openal in comparing to addon retroarch for coreelec at CE.

atirage21 · LE13 on Radxa ROCK 5B+ atirage21 July 30, 2026 at 9:08 AM

Also i found h264 videos with aac audio, which runt freezing on start of playing with broken decoding. Here is one of them:

Testing

Shared with Dropbox

www.dropbox.com

Code

2026-07-30 09:56:39.953 T:1530 info <general>: VideoPlayer::OpenFile: smb:// ...... Bodybangers - Europe ft. Victoria Kern, Nicco.mp4
2026-07-30 09:56:39.955 T:1850 info <general>: Creating InputStream
2026-07-30 09:56:40.163 T:1850 info <general>: Creating Demuxer
2026-07-30 09:56:40.195 T:1850 info <general>: Opening stream: 0 source: 256
2026-07-30 09:56:40.195 T:1850 info <general>: Creating video codec: mpeg4
2026-07-30 09:56:40.195 T:1850 info <general>: CDVDVideoCodecDRMPRIME::Open - using decoder V4L2 mem2mem MPEG4 decoder wrapper
2026-07-30 09:56:40.195 T:1850 info <general>: CDVDVideoCodecDRMPRIME::Open - unable to open codec
2026-07-30 09:56:40.195 T:1850 info <general>: CDVDVideoCodecDRMPRIME::Open - using decoder MPEG-4 part 2
2026-07-30 09:56:40.197 T:1850 info <general>: Creating video thread
2026-07-30 09:56:40.197 T:1860 info <general>: running thread: video_thread
2026-07-30 09:56:40.201 T:1850 info <general>: Opening stream: 1 source: 256
2026-07-30 09:56:40.201 T:1850 info <general>: Finding audio codec for: 86018
2026-07-30 09:56:40.202 T:1850 info <general>: CDVDAudioCodecFFmpeg::Open() Successful opened audio decoder aac
2026-07-30 09:56:40.202 T:1850 info <general>: void CVideoPlayerAudio::OpenStream(CDVDStreamInfo&, std::unique_ptr<CDVDAudioCodec>): Allowing max Out-Of-Sync Value of 50 ms
2026-07-30 09:56:40.202 T:1850 info <general>: Creating audio thread
2026-07-30 09:56:40.202 T:1861 info <general>: running thread: CVideoPlayerAudio::Process()
2026-07-30 09:56:40.212 T:1861 info <general>: Creating audio stream (codec: aac, channels: 2, sample rate: 44100, no pass-through)
2026-07-30 09:56:40.221 T:1653 info <general>: CActiveAESink::OpenSink - initialize sink
2026-07-30 09:56:40.240 T:1860 error <general>: CDVDVideoCodecDRMPRIME::FilterOpen - avfilter_init_dict: src: Invalid argument (-22)
2026-07-30 09:56:40.252 T:1530 warning <general>: bool KODI::WINDOWING::GBM::CDRMUtils::FindVideoAndGuiPlane(uint32_t, uint64_t, uint64_t, uint64_t): Cannot find a Video Plane [1920x1080] format:YU12, modifier:LINEAR together with a Gui Plane [1920x1080] format:AR24, modifier:ARM_BLOCK_SIZE=16x16,MODE=YTR|SPARSE.
2026-07-30 09:56:40.252 T:1530 error <general>: CBaseRenderer::GetShaderFormat - unsupported format drm_prime
2026-07-30 09:56:40.252 T:1860 warning <general>: CRenderManager::Configure - failed to configure
2026-07-30 09:56:40.252 T:1860 error <general>: OutputPicture - failed to configure renderer
2026-07-30 09:56:40.421 T:1653 info <general>: CAESinkALSA::Initialize - Attempting to open device "sysdefault:CARD=hdmi0"
2026-07-30 09:56:40.428 T:1653 info <general>: CAESinkALSA::Initialize - Opened device "sysdefault:CARD=hdmi0"
2026-07-30 09:56:40.428 T:1653 info <general>: CAESinkALSA::InitializeHW - Your hardware does not support AE_FMT_FLOAT, trying other formats
2026-07-30 09:56:40.428 T:1653 info <general>: CAESinkALSA::InitializeHW - Using data format AE_FMT_S24NE4
2026-07-30 09:56:45.776 T:1860 warning <general>: OutputPicture - timeout waiting for buffer
2026-07-30 09:56:53.364 T:1684 warning <general>: Skipped 147 duplicate messages..
2026-07-30 09:56:53.364 T:1684 info <general>: JSONRPC Server: New connection added
2026-07-30 09:56:53.364 T:1684 info <general>: JSONRPC Server: Disconnection detected
2026-07-30 09:56:53.365 T:1684 info <general>: JSONRPC Server: New connection added
2026-07-30 09:56:53.374 T:1684 info <general>: JSONRPC Server: Disconnection detected
2026-07-30 09:56:53.408 T:1860 warning <general>: OutputPicture - timeout waiting for buffer
2026-07-30 09:57:03.448 T:1860 warning <general>: Skipped 195 duplicate messages..
2026-07-30 09:57:03.448 T:1860 warning <general>: OutputPicture - timeout waiting for buffer
2026-07-30 09:57:06.039 T:1530 warning <general>: Skipped 50 duplicate messages..
2026-07-30 09:57:06.039 T:1530 info <general>: Loading skin file: SettingsCategory.xml, load type: KEEP_IN_MEMORY
2026-07-30 09:57:06.060 T:1860 warning <general>: OutputPicture - timeout waiting for buffer
2026-07-30 09:57:13.917 T:1530 warning <general>: Skipped 153 duplicate messages..
2026-07-30 09:57:13.917 T:1530 info <general>: Log level changed to "trace"
2026-07-30 09:57:13.917 T:1530 info <general>: Enabled debug logging due to GUI setting. Level 2.

Display More

atirage21 · LE13 on Radxa ROCK 5B+ atirage21 July 26, 2026 at 6:53 AM

Only is not wakeup of this radxa from suspend after push power button, but is longtime issue.

Posts by atirage21

LE13 Testing for RK3288, RK3328, RK3399, RK3566, RK3568, RK3576, RK3588

LE13 Testing for RK3288, RK3328, RK3399, RK3566, RK3568, RK3576, RK3588

LE13 on Radxa ROCK 5B+

LE13 on Radxa ROCK 5B+

LE13 on Radxa ROCK 5B+

LE13 on Radxa ROCK 5B+

LE13 on Radxa ROCK 5B+

LE13 Testing for RK3288, RK3328, RK3399, RK3566, RK3568, RK3576, RK3588

RE: LE13 on Radxa ROCK 5B+

LE13 on Radxa ROCK 5B+

LE13 on Radxa ROCK 5B+

LE13 on Radxa ROCK 5B+

LE13 Testing for RK3288, RK3328, RK3399, RK3566, RK3568, RK3576, RK3588

LE13 Testing for RK3288, RK3328, RK3399, RK3566, RK3568, RK3576, RK3588

LE13 on Radxa ROCK 5B+

LE13 Testing for RK3288, RK3328, RK3399, RK3566, RK3568, RK3576, RK3588

Flatpak and RetroArch

LE13 on Radxa ROCK 5B+

LE13 on Radxa ROCK 5B+