Posts by Betimmm

Quote from Tim_Taylor

Do this:

MINIX U1 / U9:

insert SD card, plug in power cord. Then hold in power button for at least 6 seconds or until LE Logo appears.

Or this:

Terminal Emulator

: boot to Android, insert SD card/USB drive with LE, install Terminal Emulator app (either from Google Play or

APKMirror

), run it and type reboot update. Your box should reboot to LE.Be shure to prepare SD card properly.If Your device boots every time to Android it could be Your fault preparing SD card

Thanks!!!

Finally i got it working (after using method #2)!!!

Quote from CI6N0Z

Make sure you use the correct device tree (DTB), as that might be the problem in your case. There are plenty of similar problems in the forum which you can read about... And hopefully one of them might help you as well

Im using the specific u9 tree from post #1...

Tried flashing with rufus and librelec...

Im using the install instructions from here.

Everytime U9 boots directly to android :T

Anyone using LibreELEC 8.2.4.1 - S912 + Minix U9 + SDCard?

Cant boot to libreelec... it goes directly to android.

Any tips?

Hi there!

Im running this community build on a minix u9.

When i shutdown libreelec, minix shows me a green light, probably meaning sleep mode (Blue Light when powered on). When i shutdown Android, i get no (green) light, probably meaning that it has been completely shuted down.

The problem is: while on libreelec standby (green light), it prevents my AVR from turning on automatically when i turn on the TV (or avr auto HDMI switching and etc).

What i haver to do: unplug minix Power Cord and plug it again. This way, the green light goes off and i guess minix is completelly shuted down. Then, i can turn on the TV and my avr Works Just fine. It took me days to realize this...

So, my question is: is there any way to completely shutdown libreelec on minix, so that i dont get this green light state?

Sorry for my english btw