Posts by maravillo

    Hi guys,

    I have 2 images built from git:

    mike@ubuntu:~/http://LibreELEC.tv/target$ ls -l *.gz

    -rw-rw-r-- 1 mike mike 129888819 Jan 4 12:27 LibreELEC-RPi2.arm-9.0-devel-20180104100928-r27773-gf115a20.img.gz

    -rw-rw-r-- 1 mike mike 328814266 Jan 14 07:46 LibreELEC-RPi2.arm-9.0-devel-20180114053500-r27773-gf115a20.img.gz

    20180104100928 was built using "PROJECT=RPi DEVICE=RPi2 ARCH=arm make image" and boots perfectly fine.

    20180114053500 was built using "PROJECT=RPi DEVICE=RPi2 ARCH=arm DEBUG=yes make image" and is stuck during boot up with "LibreELEC (community): devel-20180114053500-r27773-gf115a20" at the top of the screen.

    Did I miss anything? The Compile section of the Wiki says I'll need a minimum of 512MB boot partition. How do I check that I meet the requirements? I didn't resize any partitions after writing the image on the sdcard using Rufus.

    Thanks in advance.

    Hi guys,

    I just got a USB DTV dongle which works on my Android phone. Is there a chance to get it also working on LE? Below are the dmesg output I got when attaching it in the USB port.

    On Android Xiaomi MiMax LineageOS 14.1-20171220-UNOFFICIAL-helium lineage_helium-userdebug 7.1.2:

    Linux localhost 3.10.105-lineageos-g4d6dc2538f6e-61317-gf7af6d09a312 #1 SMP PREEMPT Wed Dec 20 00:52:13 EST 2017 armv8l GNU/Linux

    [51363.953310] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

    [51363.953317] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

    [51363.953323] usb usb1: Product: EHCI Host Controller

    [51363.953330] usb usb1: Manufacturer: Linux 3.10.105-lineageos-g4d6dc2538f6e-61317-gf7af6d09a312 ehci_hcd

    [51363.953335] usb usb1: SerialNumber: msm_hsusb_host

    [51363.954580] hub 1-0:1.0: USB hub found

    [51363.954602] hub 1-0:1.0: 1 port detected

    [51364.259947] usb 1-1: new high-speed USB device number 2 using msm_hsusb_host

    [51364.385733] usb 1-1: New USB device found, idVendor=048d, idProduct=9306

    [51364.385746] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

    On LibreELEC 8.2.2:

    Linux LibreELEC 4.9.59 #1 SMP Fri Dec 15 23:48:41 GMT 2017 armv7l GNU/Linux

    [43065.879291] WARNING: You are using an experimental version of the media stack.

    [43065.879291] As the driver is backported to an older kernel, it doesn't offer

    [43065.879291] enough quality for its usage in production.

    [43065.879291] Use it with care.

    [43065.879291] Latest git patches (needed if you report a bug to [email protected]:(

    [43065.879291] a83dbc951051ded0ec728f65cc918b7320600b55 Remove unused stv6120 headers.

    [43065.887682] WARNING: You are using an experimental version of the media stack.

    [43065.887682] As the driver is backported to an older kernel, it doesn't offer

    [43065.887682] enough quality for its usage in production.

    [43065.887682] Use it with care.

    [43065.887682] Latest git patches (needed if you report a bug to [email protected]:(

    [43065.887682] a83dbc951051ded0ec728f65cc918b7320600b55 Remove unused stv6120 headers.

    [43065.900981] dvb_usb_af9035 1-1.4:1.0: prechip_version=83 chip_version=01 chip_type=9306

    [43065.901357] usb 1-1.4: dvb_usb_v2: found a 'ITE 9303 Generic' in warm state

    [43065.902944] usb 1-1.4: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer

    [43065.903891] dvb_usb_af9035: probe of 1-1.4:1.0 failed with error -12

    [43065.903953] usbcore: registered new interface driver dvb_usb_af9035

    On LibreELEC 8.2 DVB - Dongle inserted during bootup:

    Linux LibreELEC-iTechie 4.9.59 #1 SMP Mon Nov 13 15:34:38 CET 2017 armv7l GNU/Linux

    [ 6.716490] WARNING: You are using an experimental version of the media stack.

    [ 6.716490] As the driver is backported to an older kernel, it doesn't offer

    [ 6.716490] enough quality for its usage in production.

    [ 6.716490] Use it with care.

    [ 6.716490] Latest git patches (needed if you report a bug to [email protected]:(

    [ 6.716490] bbae615636155fa43a9b0fe0ea31c678984be864 media: staging: atomisp2: cleanup null check on memory allocation

    [ 6.716490] 1f709713cbd70efe85e76d9e9453606c6cc4bf82 media: staging: media: atomisp: Fix oops by unbalanced clk enable/disable call

    [ 6.716490] 9d39e46bdd9df945669a9039660a3194bdc8d0ac media: tc358743: validate lane count

    [ 6.717358] media: Linux media interface: v0.10

    [ 6.723939] WARNING: You are using an experimental version of the media stack.

    [ 6.723939] As the driver is backported to an older kernel, it doesn't offer

    [ 6.723939] enough quality for its usage in production.

    [ 6.723939] Use it with care.

    [ 6.723939] Latest git patches (needed if you report a bug to [email protected]:(

    [ 6.723939] bbae615636155fa43a9b0fe0ea31c678984be864 media: staging: atomisp2: cleanup null check on memory allocation

    [ 6.723939] 1f709713cbd70efe85e76d9e9453606c6cc4bf82 media: staging: media: atomisp: Fix oops by unbalanced clk enable/disable call

    [ 6.723939] 9d39e46bdd9df945669a9039660a3194bdc8d0ac media: tc358743: validate lane count

    [ 6.730240] dvb_usb_af9035 1-1.4:1.0: prechip_version=83 chip_version=01 chip_type=9306

    [ 6.730622] usb 1-1.4: dvb_usb_v2: found a 'ITE 9303 Generic' in cold state

    [ 6.738701] usbcore: registered new interface driver brcmfmac

    [ 6.829792] usb 1-1.4: dvb_usb_v2: downloading firmware from file 'dvb-usb-it9303-01.fw'

    [ 6.866375] dvb_usb_af9035 1-1.4:1.0: firmware version=1.4.0.0

    [ 6.866396] usb 1-1.4: dvb_usb_v2: found a 'ITE 9303 Generic' in warm state

    [ 6.866674] usb 1-1.4: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer

    [ 6.867222] dvbdev: DVB: registering new adapter (ITE 9303 Generic)

    [ 6.867230] usb 1-1.4: media controller created

    [ 6.868208] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.

    [ 6.877749] si2168: probe of 3-0067 failed with error -5

    [ 6.879138] usbcore: registered new interface driver dvb_usb_af9035

    On LibreELEC 8.2 DVB - Dongle inserted after bootup:

    Linux LibreELEC-iTechie 4.9.59 #1 SMP Mon Nov 13 15:34:38 CET 2017 armv7l GNU/Linux

    [ 74.981505] usb 1-1.4: new high-speed USB device number 4 using dwc_otg

    [ 75.073487] usb 1-1.4: New USB device found, idVendor=048d, idProduct=9306

    [ 75.073502] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0

    [ 75.087881] rc_core: loading out-of-tree module taints kernel.

    [ 75.092060] WARNING: You are using an experimental version of the media stack.

    [ 75.092060] As the driver is backported to an older kernel, it doesn't offer

    [ 75.092060] enough quality for its usage in production.

    [ 75.092060] Use it with care.

    [ 75.092060] Latest git patches (needed if you report a bug to [email protected]:(

    [ 75.092060] bbae615636155fa43a9b0fe0ea31c678984be864 media: staging: atomisp2: cleanup null check on memory allocation

    [ 75.092060] 1f709713cbd70efe85e76d9e9453606c6cc4bf82 media: staging: media: atomisp: Fix oops by unbalanced clk enable/disable call

    [ 75.092060] 9d39e46bdd9df945669a9039660a3194bdc8d0ac media: tc358743: validate lane count

    [ 75.094505] media: Linux media interface: v0.10

    [ 75.098229] WARNING: You are using an experimental version of the media stack.

    [ 75.098229] As the driver is backported to an older kernel, it doesn't offer

    [ 75.098229] enough quality for its usage in production.

    [ 75.098229] Use it with care.

    [ 75.098229] Latest git patches (needed if you report a bug to [email protected]:(

    [ 75.098229] bbae615636155fa43a9b0fe0ea31c678984be864 media: staging: atomisp2: cleanup null check on memory allocation

    [ 75.098229] 1f709713cbd70efe85e76d9e9453606c6cc4bf82 media: staging: media: atomisp: Fix oops by unbalanced clk enable/disable call

    [ 75.098229] 9d39e46bdd9df945669a9039660a3194bdc8d0ac media: tc358743: validate lane count

    [ 75.102069] dvb_usb_af9035 1-1.4:1.0: prechip_version=83 chip_version=01 chip_type=9306

    [ 75.102432] usb 1-1.4: dvb_usb_v2: found a 'ITE 9303 Generic' in cold state

    [ 75.112634] usb 1-1.4: dvb_usb_v2: downloading firmware from file 'dvb-usb-it9303-01.fw'

    [ 75.151484] dvb_usb_af9035 1-1.4:1.0: firmware version=1.4.0.0

    [ 75.151518] usb 1-1.4: dvb_usb_v2: found a 'ITE 9303 Generic' in warm state

    [ 75.152207] usb 1-1.4: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer

    [ 75.153337] dvb_usb_af9035: probe of 1-1.4:1.0 failed with error -12

    [ 75.153447] usbcore: registered new interface driver dvb_usb_af9035