I keep reading references to Alex's OpenELEC build, but could somebody tell me where I can find it? I am waiting for my Nexbox A95X to arrive and would like to be able to compare the two builds. Thanks!
But you'll need to sign up to read.
Posts by WileCoyote
-
-
my log has the same entries when playing HEVCThank you for the file and your testing.
I've just tried to stream some files from my PC rather than using USB, and the glitches seem less likely to appear. My USB drives are only USB 2.0, so perhaps they don't allow the buffer to fill quickly enough.
Any chance you could try the test files from a slowish USB 2.0 stick and see if you could reproduce the problem?
Perhaps the reason these files play on Android SPMC and Kodi, but not OpenELEC or LibreELEC is because the buffer/cache settings are different?
-
Thanks to all that tested. Can anyone who can read Kodi logs have a look through mine and see if anything jumps out as an obvious cause?
Is this normal?:
QuoteDisplay More
ERROR: Unable to load libamplayer.so, reason: libamplayer.so: cannot open shared object file: No such file or directory
DEBUG: Dll libamplayer.so was not found in path
WARNING: CAMLCodec::CAMLCodec libamplayer.so not found, trying libamcodec.so instead
DEBUG: SECTION:LoadDLL(libamcodec.so)
DEBUG: Loading: libamcodec.so
INFO: DVDVideoCodecAmlogic: Opened Amlogic Codec
DEBUG: FactoryCodec - Video: am-h265 - OpenedThere also seem to be some audio synchronization issues in the error log.
-
Hi,I cannot reproduce the bug. Using also LibreELEC 7.0.2.005 running from microSD card, I could play back the file without any trouble multiple times.
I tried several HEVC test files after I setup my box (both 720p and 1080p, Main and Main10 profile) and did not encounter any visible glitches yet.
Box: OTT MXQ Pro 4k (p200) with Amlogic S905 Rev.b. TV: old Philips (Full HD)
Can you provide a longer file that always shows glitchy playback on your device? If glitches only happen sometimes and are not reproducable, your board/SoC might have a defect or some chip might be overheating.
Thanks for testing so quickly. The file I provided the link to always glitches, but for some reason, does not glitch much when first played. I don't think it's a defective chip as these files work flawlessly on SPMC.
I will try to find some more examples.
-
Hardware: Beelink Mini MX III 2GB/16GB
Software: LibreELEC 7.0.2.005 running from microSD card
Bug:
- Glitchy video for a few seconds from the start of videos, from new chapters only when skipped to, and when a video is resumed.
- The bug is present in Alex's OpenELEC builds and previous LibreELEC builds, but is not present in SPMC or Kodi when run through Android on the device.
- Bug seems more prevalent in 10 bit files.
- Seems to be worse on files played from USB.
- Sometimes files start from around 15 seconds in, so the beginning of the video is missing. Skipping back to the start after this happens makes the video play perfectly.
- In the log below, I ran the test video several times. The first time was not very glitchy, but subsequent runnings were.
Using this video sample: video-h265.mkv
Logfile here:
-
Is anyone using these builds on a Mini MX 2/16GB - or do they only work with the 1/8GB ?Yes, I'm using the 7.0.2.005 image with a Beelink Mini MX III 2/16GB box via microSD card and for the most part it works very well. There are issues with HEVC stuttering (also present on Alex's OpenELEC build, but not on Android SPMC). Also, 5.1 PCM output doesn't work, but another thread suggests that this affects all LibreELEC builds.
-
Hi,
I'm having the same problem on an S905 device. AAC 5.1 files play fine (albeit with 2.0 output) through HDMI to a receiver when the channels are set to 2.0, but there's no sound when the channels are set to 5.1. However, files with AAC 2.0 play fine even when channels are set to 5.1. All AAC files, whatever their number of channels seem to play fine when the channels are set to 2.0.
Trying to play the file: ChID-BLITS-EBU.mp4
Here's the log:
Hope it helps!
