Hello, have LE LibreELEC-S905.arm-8.2-8.2.3.1 on KI PLUS. Remote runs but no repeating if I hold the button. I mean I have to pres button over and over again. Is it possible to enable autorepeat? I think it is enabled by default but need to change some delay maybe?
Thanks.
I use dvb-s only on KI PRO. Never had problem on CE 8.95.6. But I have problems with other things... Please where could I get this 8.2.5 you talked about for KI PRO? Thanks.
Please what is THE LAST STABLE LE or CE (Krypton not Leia) for S905 (KI PRO)? Thanks.
Hello, what is the bEst box (speed, smooth running with LE) today? Wetek play 2 is sold out. Maybe Mecool K1? Or is there some new one?
Should I focuse only at S905 or also S912? Maybe KIII pro? Thanks!
CvH there is no oscam installed in media box. I use the built in Newcamd client (already present in tvheadend).
If you mean the oscam server part it must be OK. It runs over 5 years without any problem. It is running with other HW.
Problem is there is no activity between my media box (newcamd) and server (oscam). So this is media box´s problem.
BUT this problem is only with single provider. One provider (from Thor sattelite runs perfectly, the other from Astra 23,5 doesn´t eun. Newcamd just doesn´t send any requests to server.
HTS Tvheadend 4.2.5 ~ LibreELEC Tvh-addon v8.2.113 running at LE 8.2.2. (s905) Mecool KII Pro.
I use newcamd integrated in TVH. This ask external OSCAM server for codes. One provider runs without any problems but other provider not. Seems like TVH not communicate with its own newcamd service (but only for specified provider) so newcamd doesn´t send requests to server.
Did you aver notices similar issue? Which log to check to get more info? THANKS.
Could I use this without any SD card?
1, SSH into Libreelec
2, cd .update/
3, wget myolderversionlibreelec.tar (change xxx.dtb if needed)
4, reboot
Please could someone help? I have KII Pro with latest Kszaq´s Libreelec installed on eMMC. I need to downgrade to afl1 stable version LibreELEC-S905.arm-8.2-devel-201710311040-g99798df-I.tar (because of Live TV stutter). What is the best way to do this? I know hot to do this if Android is on eMMC but how with Libreelec installed?
THANKS,
Continuity counter error on TVHEADEND
Display Moreello. I have KII Pro (s905) with latest kszaq´s libreelec (8.2.2.2).HTS Tvheadend 4.2.5 ~ LibreELEC Tvh-addon v8.2.113.
In live TV there is every 5 - 8 minutes small lag (artefacts and sound distortion) for 1 - 2 seconds. I use dvb-s tuner.
Does anybody has similar issue?
afl1 writes in previous posts: "
For Tvheaden42 set following options:
- for every standard Maximum PIDs: 26
- Configuration ->Channel/EPG->EPG Grabber Modules->Over-the-Air: EIT: DVB Grabber->Enabled"
but I´m not sure if this has something to do with my problem (I didn´t set it yet)
I checked TVHeadend and it shows: Continuity counter error´s - so maybe problem with kernel? Does anybody found a solution for Continuity counter error?
Same problem as Ftelf here. I have KII Pro with 8.2.2.2.
In this thread Afl1 wrote:
As I see in log pvr.dvblink didn't send fps. In release 8.1.9 was removed pts based frame rate tracking. You can fix it by setting frame rate fallback in pvr settings or you can use my test build with fix for 0 fps.
So I will try it.
I have Libreelec installed on eMMC. I didn´t measure temperature. But my issue with Live TV comes even if Kii is freshly started.
This is remote.conf for Kii pro. What do you mean? Could you please provide more detailed info?
#amlogic NEC remote
factory_code = 0xff000001 #video striong
work_mode = 0
repeat_enable = 1
repeat_delay = 200
repeat_peroid = 39
release_delay = 121
debug_enable = 1
fn_key_scancode = 0x99
left_key_scancode = 0x5a
right_key_scancode = 0x1b
up_key_scancode = 0x06
down_key_scancode = 0x16
ok_key_scancode = 0x1a
pageup_key_scancode = 0x55
pagedown_key_scancode = 0x15
key_begin
0x59 116 #power
0x19 113 #mute
#0x4d 18 #epg
#0x0e 23 #info
0x0d 172 #home
0x51 14 #del
0x12 24 #mouse
0x11 34 #dtv
0x45 46 #menu
0x05 1 #exit
0x06 103 #up
0x5a 105 #left
0x1a 28 #enter
0x1b 106 #right
0x16 108 #down
0x55 177 #104 #page+
0x15 178 #109 #page-
0x52 2 #1
0x50 3 #2
0x10 4 #3
0x13 115 #vol+
0x56 5 #4
0x54 6 #5
0x14 7 #6
0x17 114 #vol-
0x4e 8 #7
0x4c 9 #8
0x0c 10 #9
0x0f 11 #0
0x4a 168 #fr
0x48 208 #ff
0x08 165 #prev
0x0b 163 #next
0x46 57 #play/pause
0x44 45 #stop
0x04 37 #pvr, tv/radio
0x07 132 #repeat
0x42 398 #59 #red
0x40 399 #60 #green
0x00 400 #61 #yellow
0x03 401 #62 #blue
0x1f 364 #fav
0x4d 365 #EPG
0x58 79 #app
0x18 65 #browser
#0x0e 136 #audio
0x09 38 #20 #next subtitle
0x02 23 #info
0x01 27 #audio
key_endFtelf seems like we are watching the same channels (cz) :). Do you use freesat or skylink? Do you use newcamd for descrambling?
btw - similar problem in openelec (old thread) here: OpenELEC Mediacenter - OpenELEC Forum - [SOLVED, by workaround] Video stutters on OpenELEC with falling or jumping fps (1/2)
Kii pro (s905), libreelec latest. In Kodi there is addon called "Keymap editor". If I want to map keys from remote controller some keys (like pause/play) works and Keymap editor is able to store them but some other buttons (like "mouse" button or "apps" button) are not recognized by this addon. it just ignore their pressing.
Any idea? Is it necesarry to config those buttons in remote.conf or somewhere? Thanks.
ello. I have KII Pro (s905) with latest kszaq´s libreelec (8.2.2.2).HTS Tvheadend 4.2.5 ~ LibreELEC Tvh-addon v8.2.113.
In live TV there is every 5 - 8 minutes small lag (artefacts and sound distortion) for 1 - 2 seconds. I use dvb-s tuner.
Does anybody has similar issue?
afl1 writes in previous posts: "
For Tvheaden42 set following options:
- for every standard Maximum PIDs: 26
- Configuration ->Channel/EPG->EPG Grabber Modules->Over-the-Air: EIT: DVB Grabber->Enabled"
but I´m not sure if this has something to do with my problem (I didn´t set it yet)
afl1 what is the difference between your build (for KII pro) and kszaq´s ? Thanks.
Hello. I have KII Pro with latest kszaq´s libreelec (8.2.2.1).HTS Tvheadend 4.2.5 ~ LibreELEC Tvh-addon v8.2.113.
In live TV there is every 5 - 8 minutes small lag (artefacts and sound distortion) for 1 - 2 seconds. I use dvb-s tuner.
Does anybody has similar issue?