Posts by sabamimi

sabamimi · Need to modify pulse/default.pa sabamimi May 29, 2020 at 2:48 PM

Hello there,

Thanks for your help.

I gave up on that option since Guacamole was way to slooow (even on the LAN) so it did not make sens to try to get a playing movie sound via VNC.

Thanks again for your help and for LibreElec (my every day movie theater)

Cheers

sabamimi · Need to modify pulse/default.pa sabamimi May 28, 2020 at 8:18 AM

Hi ElBoluTony,

Yes I did.

and to make sure, I just rebooted and re did it :

Thanks for your help.

sabamimi · Need to modify pulse/default.pa sabamimi May 27, 2020 at 6:01 PM

mglae :

unfortunately I am getting " Module initialization failed"

Any idea why ?

sabamimi · Need to modify pulse/default.pa sabamimi May 27, 2020 at 5:19 PM

Thanks,

Will do and report (success is possible)

Thanks again!

sabamimi · Need to modify pulse/default.pa sabamimi May 27, 2020 at 2:20 PM

OK but what conf file are you talking about ?
Do you know of any other pulse conf file? I am not an a pulse expert either....

....just a poor lonely user trying to modify a file in /etc.

Do you know of a more brutal way to apply a modification ?

(even if it will be lost upon upgrade.)

sabamimi · Need to modify pulse/default.pa sabamimi May 27, 2020 at 1:42 PM

Well....no joy !

I did :

1.

cp /etc/pulse/default.pa /storage/.config/pulse-daemon.conf.d/default.pa

2.

add the following line

Code

load-module module-native-protocol-tcp auth-ip-acl=192.168.0.0/24 auth-anonymous=1

to the bottom of /storage/.config/pulse-daemon.conf.d/default.pa

3.

reboot

4. check /etc/pulse/default.pa ......and my addition was not there !!!!

Any other idea?

sabamimi · Need to modify pulse/default.pa sabamimi May 27, 2020 at 12:44 PM

Thanks for your reply,

I will test and let you known,

thanks again !

sabamimi · Need to modify pulse/default.pa sabamimi May 27, 2020 at 10:24 AM

Hello to all,

In order to enable sound to the Guacamole / VNC combination, I need to add a line to pulse configuration.

Of course, I understand that the filesystem for /etc/pulse is read only.

What is the best way to modify the file /etc/pulse/default.pa ?

Thanks for any direction / help

sabamimi · Hang during playback Kodi 17.3 sabamimi June 20, 2017 at 7:43 AM

Hi there,

I had the same pb with a zotac box.

Very strange but for me the version 8.01 is working great (no hang)

Upgrading to libreelec 8.02 and the pb is back

Bottom line : I am back on libreelec 8.01

Hope this helps

sabamimi · vnc addon sabamimi July 24, 2016 at 10:04 PM

Quote from asmar

no connection after install x11vnc-4.3.2 ...
i think port 5900 not work ... how can fix that ?

Asmar,
I am runing it on an intel platform.
Is this also your case?

sabamimi · vnc addon sabamimi July 17, 2016 at 4:59 PM

Quote from RyanW

I manually installed service.system.x11vnc-4.3.2.zip on my machine. I found it on OE forums. Works great on LE.

Hello RyanW,

I search everywhere in the OE forums without success...
Would you care to share the Zip ? (or a pointer)

Edit: I found this one and it did work for me
service.system.x11vnc-4.3.2.zip

Many thanks
Sabamimi