Posts by blich

blich · Some key mappings don't work in 8.2.0.1 blich November 12, 2017 at 8:34 PM

Thanks for the reply! When I disable Lirc, it works. What will I lose if I leave this disabled?

I'm using an XBOX 360 universal media remote with an ehome IR receiver. I haven't changed anything in the config files. Only the remote.xml file.

blich · Some key mappings don't work in 8.2.0.1 blich November 12, 2017 at 12:45 AM

A bit of progress here. I got the context menu working. I had a duplicate entry in remote.xml that was messing it up.

No luck on channel up or channel down though. If I run irw and press those keys, nothing is registered.

Is it possible to manually add those keys?

Here's the output of lsusb -v.

Code

Bus 001 Device 004: ID 0471:0815 Philips (or NXP) eHome Infrared Receiver
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        16
  idVendor           0x0471 Philips (or NXP)
  idProduct          0x0815 eHome Infrared Receiver
  bcdDevice            0.00
  iManufacturer           1 Philips
  iProduct                2 eHome Infrared Transceiver
  iSerial                 3 PH00HQ8Q
  bNumConfigurations      1

  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              100mA

    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0010  1x 16 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0010  1x 16 bytes
        bInterval               0

Display More

blich · Some key mappings don't work in 8.2.0.1 blich November 11, 2017 at 8:49 PM

I just upgraded from 8.0.2 but 8.2.0.1. In the previous version, the display button would bring up the context menu. Also, the channel up and channel down buttons were mapped to page up and page down. After the upgrade, these mappings no longer work. I diffed my old remote.xml and lircmap.xml with the new ones and both are identical. Is there something I need to do to re-enable these?