Unfortunately that did not work with the same results.
Here are some logs, maybe they can help.
i used your 4kfix img.gz (fresh install on SD using Rufus) from your GitHub, since the tar doesn't work (seems corrupted, gives me an error when attempting to extract after putting it in the update folder and restarting).
ok i will try force resolution after i build all weteks
i have fix now up soon
here is it systemd fixed and 4k fixed
OpenPHT-Embedded-S905.arm-8.2-devel-20180408052801-r26548-g3a13cd9.tar
Thanks!
I just uploaded a pic of the loading screen error.
i have fix now up soon
veisen, not sure if you read my last post but I am getting " module loading errors" when openpht starts up. Think you can fix it?
Thanks!
im working on it now
Is there something I can do to test from my side? Just FYI, I'm connected to a 4K TV.
can you try this 4k fix for me please
OpenPHT-Embedded-S912.arm-8.2-devel-20180408042149-r26548-g3a13cd9------4KFIX.tar
now it is checking resolution like this
11:45:19 T:4117694160 NOTICE: InitWindowSystem: Using EGL Implementation: amlogic
11:45:19 T:4117694160 NOTICE: Found resolution 1280 x 720 for display 0 with 1280 x 720 @ 60.000000 Hz
11:45:19 T:4117694160 NOTICE: Found resolution 1280 x 720 for display 0 with 1280 x 720 @ 59.940060 Hz
11:45:19 T:4117694160 NOTICE: Found resolution 1920 x 1080 for display 0 with 1920 x 1080i @ 60.000000 Hz
11:45:19 T:4117694160 NOTICE: Found resolution 1920 x 1080 for display 0 with 1920 x 1080i @ 59.940060 Hz
11:45:19 T:4117694160 NOTICE: Found resolution 1920 x 1080 for display 0 with 1920 x 1080 @ 60.000000 Hz
11:45:19 T:4117694160 NOTICE: Found resolution 1920 x 1080 for display 0 with 1920 x 1080 @ 59.940060 Hz
11:45:19 T:4117694160 NOTICE: Found resolution 1280 x 720 for display 0 with 1280 x 720 @ 50.000000 Hz
11:45:19 T:4117694160 NOTICE: Found resolution 1920 x 1080 for display 0 with 1920 x 1080i @ 50.000000 Hz
11:45:19 T:4117694160 NOTICE: Found resolution 1920 x 1080 for display 0 with 1920 x 1080 @ 30.000000 Hz
11:45:19 T:4117694160 NOTICE: Found resolution 1920 x 1080 for display 0 with 1920 x 1080 @ 29.970030 Hz
11:45:19 T:4117694160 NOTICE: Found resolution 1920 x 1080 for display 0 with 1920 x 1080 @ 50.000000 Hz
11:45:19 T:4117694160 NOTICE: Found resolution 1920 x 1080 for display 0 with 1920 x 1080 @ 24.000000 Hz
11:45:19 T:4117694160 NOTICE: Found resolution 1920 x 1080 for display 0 with 1920 x 1080 @ 23.976025 Hz
11:45:19 T:4117694160 NOTICE: Found ([email protected]) at 20, setting to RES_DESKTOP at 16
i will try make fix 4U
im working on 4k fix
ok this is problem in the new kernel i can try to fix it but i havent got this device it is egl problem problem in resolution
Can you post a link please, I cannot find it. All I see is the one you uploaded seven hours ago. Thanks!
Release OpenPHT 1.9 for AML based on LibreELEC 8.2 · Veisen/OpenPHT · GitHub
OpenPHT-Embedded-S905.arm-8.2-devel-20180406100455-r26548-g3a13cd9.tar
yesterday i will upload version for S805 S912 and WeTek play 2
Just tried your full build, reinstalled from scratch. I'm still having the same problems I was having with your original builds which is that my volume control does not work on my Wi-Fi remote. Therefore the only build working for me right now is Eugene's.
It's disappointing to see that you think Eugene stole your work when really he was just trying to help out. It's a shame that you are not willing to share anymore.
on the git is version with fixed remote
Thanks for the update, just tried the .tar in the update folder and it fails. Message is
"Cannot update because system s905 arch64" or something to tha
it is bcs im using ARM compiler as kszaq ..... Eugene use aarch64 compiler on my old build ....... you must install it as new build by sdcard
new version (1.9)
.
based on LibreELEC 8.2 on 1st post
because Eugene copy my build only change name and compile it i will not release source code he can try make own version
S805 and other AML device will be released soon
Has anybody installed it yet? I'm using a wireless remote, Minix A2 lite and it always works just right but in this case my volume down button does not respond, I have never seen this before with this remote. Could it be a problem with the build? It works great with the latest Libreelec, all my buttons work.
So far, I have been unsuccessful at replacing the remote.conf file since I don't know how to create it without using Kodi and key map add on.
Any help would be appreciated.
Im at work i will fix it later when i have some time
Thank you @viesen for this interesting development. I'm new to plex server but have it running on Dietpi and I'm very happy with it, so I'm in the interested but slightly puzzled newbie phase about all this client stuff.
I have a novice's question for you or anyone who would care to educate me. What are the differences between this and the kodi plex addon?
I have set it up on an S805 box and first impressions are that its different visually to the standard plex layout but at least equal to it. From a quick test, I think that one difference is that I can view plex channels through it. That said, for me, this wouldn't be a reason for moving away from LibreElec with the kodi plex addon.
Thanks in advance to anyone who replies.
looks on this video
Just installed it over the latest Libreelec update using your tar file and it works very well, I could see myself using this since all I use is Plex. Just one thing, my remote control is not controlling my volume yet it always works in libreelec . Any workarounds?
Thanks for sharing this!
it is bad remote controll config you can replace it
wetek play2 nnot boot and block in logo openpht after replace dtb.img from wetek 2 for kszaq
yesterday i will fix it
hello here is Plex Home Theater based on LibreELEC 8.0 from kszaq
edit: new version of OpenPHT 1.9 is based od LibreELEC 8.2 by kszaq and it can be updated form LibreELEC 8.2
all patches from kszaq builds are inserted
compiled version is for S905 and S805 it is fast and stable
i can compile itSOURCE CODE
https://github.com/Veisen/OpenPHT
COMPILED FOR S905
https://github.com/Veisen/OpenPHT/releases/tag/1.0
COMPILED FOR S905, S805, S912, WeTek Play 2 version 1.9 based on LibreELEC 8.2
https://github.com/Veisen/OpenPHT/releases/tag/1.1
more device will be released soon like RPi iMX6 and other weteks