Posts by andymarc

andymarc

Hi all,
Since the last few versions of coreelec my onboard wifi basically sucks. Lucky to get 1Mb/s.

I have a USB WIFI adapter which i have put in. The thing is depending on the way it boots its sometimes wlan 0 and sometimes its wlan 1

According to running this command this is the drivers

CoreELECx96Air:~ # readlink /sys/class/net/wlan1/device/driver

../../../../../../../bus/sdio/drivers/rtl88x2cs

CoreELECx96Air:~ # readlink /sys/class/net/wlan0/device/driver

../../../../../../../../bus/usb/drivers/8812au

So i added this to my blacklist.conf

blacklist rtl88x2cs

Rebooted and still both are showing up

here is my dmesg

http://ix.io/4FTz

My Lsmod is shown

Module Size Used by

hidp 32768 0

meson_remote 57344 0

rfcomm 53248 6

hci_uart 77824 1

btqca 16384 1 hci_uart

btbcm 16384 1 hci_uart

btintel 24576 1 hci_uart

bluetooth 385024 37 hidp,hci_uart,btintel,btqca,btbcm,rfcomm

8822cs 2519040 0

8812au 1740800 0

mali_kbase 462848 3

openvfd 192512 1

nfsd 327680 3

exportfs 16384 1 nfsd

nfs_acl 16384 1 nfsd

wireguard 118784 0

ip6_udp_tunnel 16384 1 wireguard

udp_tunnel 16384 1 wireguard

wifi_dummy 16384 0

amvdec_vp9 139264 0

amvdec_av1 172032 0

amvdec_vc1 77824 0

amvdec_real 49152 0

amvdec_ports 163840 0

v4l2_common 16384 1 amvdec_ports

videobuf2_dma_contig 20480 1 amvdec_ports

videobuf2_memops 16384 1 videobuf2_dma_contig

v4l2_mem2mem 24576 1 amvdec_ports

videobuf2_v4l2 24576 2 amvdec_ports,v4l2_mem2mem

videobuf2_core 45056 3 amvdec_ports,v4l2_mem2mem,videobuf2_v4l2

amvdec_mpeg4 73728 0

amvdec_mpeg12 131072 0

amvdec_mmpeg4 49152 0

amvdec_mmpeg12 53248 0

amvdec_mmjpeg 32768 0

amvdec_mjpeg 45056 0

amvdec_mh264 184320 0

amvdec_h265 176128 0

amvdec_h264mvc 61440 0

amvdec_h264 167936 0

amvdec_mavs 61440 0

amvdec_avs 81920 0

amvdec_avs2 233472 0

stream_input 208896 13 amvdec_h265,amvdec_mavs,amvdec_mh264,amvdec_h264mvc,amvdec_av1,amvdec_ports,amvdec_real,amvdec_vp9,amvdec_h264,amvdec_avs2,amvdec_mpeg12,amvdec_avs,amvdec_mmpeg12

decoder_common 245760 19 amvdec_h265,amvdec_mavs,amvdec_mjpeg,amvdec_mh264,amvdec_mmpeg4,amvdec_h264mvc,amvdec_av1,amvdec_mmjpeg,amvdec_ports,amvdec_real,stream_input,amvdec_vp9,amvdec_h264,amvdec_avs2,amvdec_mpeg12,amvdec_avs,amvdec_vc1,amvdec_mmpeg12,amvdec_mpeg4

firmware 28672 19 amvdec_h265,amvdec_mavs,amvdec_mjpeg,amvdec_mh264,amvdec_mmpeg4,amvdec_h264mvc,amvdec_av1,amvdec_mmjpeg,decoder_common,amvdec_real,stream_input,amvdec_vp9,amvdec_h264,amvdec_avs2,amvdec_mpeg12,amvdec_avs,amvdec_vc1,amvdec_mmpeg12,amvdec_mpeg4

media_clock 40960 17 amvdec_h265,amvdec_mavs,amvdec_mh264,amvdec_mmpeg4,amvdec_av1,amvdec_mmjpeg,decoder_common,amvdec_ports,firmware,stream_input,amvdec_vp9,amvdec_h264,amvdec_avs2,amvdec_mpeg12,amvdec_avs,amvdec_vc1,amvdec_mpeg4

video_framerate_adapter 16384 1 decoder_common

amlvideodri 20480 0

videobuf_res 16384 1 amlvideodri

videobuf_core 28672 2 amlvideodri,videobuf_res

videodev 270336 6 amlvideodri,v4l2_common,amvdec_ports,videobuf2_core,v4l2_mem2mem,videobuf2_v4l2

media 36864 1 videodev

fuse 114688 1

fbcon 57344 0

bitblit 16384 1 fbcon

softcursor 16384 1 bitblit

font 20480 1 fbcon

Can anyone assist?

andymarc

Quote from Poida

And again, read some earlier posts and you'll find that nobody expects remote.conf to work on 8.90.5. (and what the fix is)

The info is there for you.

Incidentally, since you can't brick the device whilst running from an SD card, why not just try the different dtb's (for the build your using). You've nothing to lose.

Like i originally said using the tar file in the .update folder left it stuck at LE Logo (no libreelec 8.90.5 community as per usual in the top LHS of the screen) no matter what dtb file i use.

Used an new image, restored a backup and removed the remote.conf file and now working.

andymarc

Quote from Poida

Have a read, you might already have the answer

That isn't the issue.

Besides i have updaed the build many times before on 8.2.

wrxtasy's dtb file works just fine on the new build when i do a new SD card.

I ended up reverting back afterwards because the remote.conf file doesnt seem to work on 8.90.5 either.

andymarc

I was as kazaq's last 8.2 build and updated using the .tar file. via the .update directory.

Now when i boot up it gets stuck on the libreelec logo and doesnt go any further.

Which dtb image is for mecool M8s Pro +?

i was using the one that wrxtasy has on the previous build.

Is it the kernel thats the issue?

Can i use an earlier one?

andymarc

Quote from CvH

"some" errors are no problem, if the count is always increasing (every sec) then something else is problematic (cable, reception, bad tuner ...)

Hi CvH

As you can see from my logs they happen anything between 3 and 10 minutes.

The log above is the local client just playing a channel constantly for a few hours.

andymarc

OK.. Update...

I have replaced the Mini USB cord between the PC and the playTV and so far had a stream going for the past few hours which is awesome!
I am howevergetting a few continuity errors

Code

09:15:38.262 [ INFO] mpegts: 662.5MHz in Freeview Gold Coast - tuning on DiBcom 7000PC #0 : DVB-T #0
09:15:38.262 [ INFO] subscription: 003B: "127.0.0.1 [ pvruser | Kodi Media Center ]" subscribing on channel "Nine-NBN Gold Coast", w: 150, adapter: "DiBcom 7000PC #0 : DVB-T #0", network: "Freeview Gold Coast", mux: "662.5MHz", provider: "NBN Television", service: "Nine-NBN Gold Coast", profile="htsp", hostname="127.0.0.1", username="pvruser", client="Kodi Media Center"
09:15:39.328 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2VIDEO @ #5000 Continuity counter error (total 1)
09:15:52.324 [ INFO] dvr: "RBT" on "9HD Gold Coast": Updated (udgi)
09:16:47.309 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2VIDEO @ #5000 Continuity counter error (total 2)
09:23:29.350 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2VIDEO @ #5000 Continuity counter error (total 3)
09:26:32.361 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2VIDEO @ #5000 Continuity counter error (total 4)
09:28:41.551 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2VIDEO @ #5000 Continuity counter error (total 5)
09:28:41.551 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2AUDIO @ #5010 Continuity counter error (total 1)
09:28:52.306 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2VIDEO @ #5000 Continuity counter error (total 6)
09:29:11.363 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2VIDEO @ #5000 Continuity counter error (total 8)
09:29:11.363 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2AUDIO @ #5010 Continuity counter error (total 2)
09:29:25.720 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2VIDEO @ #5000 Continuity counter error (total 9)
09:39:24.739 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2VIDEO @ #5000 Continuity counter error (total 10)
09:40:20.391 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2VIDEO @ #5000 Continuity counter error (total 11)
09:40:20.391 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: TELETEXT @ #5030 Continuity counter error (total 1)
09:42:55.945 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2VIDEO @ #5000 Continuity counter error (total 12)
09:42:55.945 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2AUDIO @ #5010 Continuity counter error (total 3)
10:00:06.000 [ INFO] epgdb: snapshot start
10:00:06.049 [ INFO] epgdb: queued to save (size 7230632)
10:00:06.049 [ INFO] epgdb: brands 0
10:00:06.049 [ INFO] epgdb: seasons 1714
10:00:06.049 [ INFO] epgdb: episodes 7455
10:00:06.049 [ INFO] epgdb: broadcasts 10698
10:00:06.049 [ INFO] epgdb: save start
10:00:06.161 [ INFO] epgdb: stored (size 1321434)
10:02:44.428 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2VIDEO @ #5000 Continuity counter error (total 13)
10:02:44.428 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2AUDIO @ #5010 Continuity counter error (total 4)
10:02:55.961 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2VIDEO @ #5000 Continuity counter error (total 14)
10:03:14.417 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2VIDEO @ #5000 Continuity counter error (total 15)
10:03:14.453 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2AUDIO @ #5010 Continuity counter error (total 5)
10:08:31.957 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2VIDEO @ #5000 Continuity counter error (total 18)
10:28:53.075 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2VIDEO @ #5000 Continuity counter error (total 19)
10:30:40.609 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2VIDEO @ #5000 Continuity counter error (total 20)
10:30:40.609 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2AUDIO @ #5010 Continuity counter error (total 6)
10:45:59.525 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2VIDEO @ #5000 Continuity counter error (total 22)
10:46:07.946 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2AUDIO @ #5010 Continuity counter error (total 7)
10:47:26.691 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2VIDEO @ #5000 Continuity counter error (total 24)
10:47:44.377 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2VIDEO @ #5000 Continuity counter error (total 26)
10:47:44.377 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2AUDIO @ #5010 Continuity counter error (total 8)
10:48:05.494 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2VIDEO @ #5000 Continuity counter error (total 31)
10:48:11.685 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2AUDIO @ #5010 Continuity counter error (total 9)
10:52:26.500 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2VIDEO @ #5000 Continuity counter error (total 33)
10:55:45.868 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2VIDEO @ #5000 Continuity counter error (total 35)
11:00:06.003 [ INFO] epgdb: snapshot start
11:00:06.053 [ INFO] epgdb: queued to save (size 7345222)
11:00:06.053 [ INFO] epgdb: brands 0
11:00:06.053 [ INFO] epgdb: seasons 1716
11:00:06.053 [ INFO] epgdb: episodes 7570
11:00:06.053 [ INFO] epgdb: broadcasts 10813
11:00:06.053 [ INFO] epgdb: save start
11:00:06.169 [ INFO] epgdb: stored (size 1340246)
11:00:29.521 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2VIDEO @ #5000 Continuity counter error (total 36)
11:00:29.521 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2AUDIO @ #5010 Continuity counter error (total 10)
11:00:39.645 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2VIDEO @ #5000 Continuity counter error (total 38)
11:00:39.645 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2AUDIO @ #5010 Continuity counter error (total 11)
11:03:19.221 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2VIDEO @ #5000 Continuity counter error (total 39)
11:04:06.998 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2VIDEO @ #5000 Continuity counter error (total 42)
11:07:32.426 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2VIDEO @ #5000 Continuity counter error (total 43)
11:17:17.734 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2VIDEO @ #5000 Continuity counter error (total 46)
11:31:22.862 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2VIDEO @ #5000 Continuity counter error (total 48)
11:35:48.867 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2VIDEO @ #5000 Continuity counter error (total 49)
11:40:05.082 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2VIDEO @ #5000 Continuity counter error (total 50)
11:42:09.868 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2VIDEO @ #5000 Continuity counter error (total 51)
11:43:53.570 [WARNING] TS: Freeview Gold Coast/662.5MHz/Nine-NBN Gold Coast: MPEG2VIDEO @ #5000 Continuity counter error (total 52)

Display More

Is this normal?

andymarc

The hardware only has USB2.0 ports according to HP

Quote from CvH

Do you have it connected to an USB-3.0 port ?

If yes pls connect it to an USB 2.0 port.

The HP lappy only has usb2.0 Ports

andymarc

logs attached

andymarc

Hi there,

I seem to be having an issue when watching live TV.

the stream is OK then all of a sudden you will get the buffering which stays at 0 and doesnt go any further.

Stopping the stream and restarting the channel fixes it but then after a while the same thing happens.

I have run a debig on the TVheadend server and it looks like the issue is as

2017-11-21 16:53:08.728 [WARNING]:TS: Freeview Gold Coast/641.625MHz/TEN Digital: TELETEXT @ #576 Continuity counter error (total 2)

2017-11-21 16:56:36.718 [WARNING]:linuxdvb: DiBcom 7000PC #0 : DVB-T #0 - FE_READ_STATUS error No such device

2017-11-21 16:56:38.719 [WARNING]:linuxdvb: DiBcom 7000PC #0 : DVB-T #0 - FE_READ_STATUS error No such device

2017-11-21 16:56:40.719 [WARNING]:linuxdvb: DiBcom 7000PC #0 : DVB-T #0 - FE_READ_STATUS error No such device

2017-11-21 16:56:42.719 [WARNING]:linuxdvb: DiBcom 7000PC #0 : DVB-T #0 - FE_READ_STATUS error No such device

2017-11-21 16:56:43.190 [WARNING]:linuxdvb: DiBcom 7000PC #0 : DVB-T #0 - poll TIMEOUT

Im running Generic build 8.2.1 on a HP probook 6550b (i5 4g ram 320G HDD)

I moved to a differnt USB port and although less freqent it still occurs.

Any other suggestions?

Posts by andymarc

Help disabling internal wifi on X96Air

[8.90.6] LibreELEC 9.0 Alpha for S905/S912 devices

[8.90.6] LibreELEC 9.0 Alpha for S905/S912 devices

[8.90.6] LibreELEC 9.0 Alpha for S905/S912 devices

Librelec Generic 8.2.1 TVheadend and Sony PlayTV Tuner

Librelec Generic 8.2.1 TVheadend and Sony PlayTV Tuner

Librelec Generic 8.2.1 TVheadend and Sony PlayTV Tuner

Librelec Generic 8.2.1 TVheadend and Sony PlayTV Tuner

Librelec Generic 8.2.1 TVheadend and Sony PlayTV Tuner