Posts by Shonk

S905 build is also fine

Thanks alot for adding the patch btw

popup's drive me crazy

Thanks that was good timing i was just about to installtointernal

The upgrade went just fine and the CEC notifications are gone

is there an s905 build for my MXQ-PRO 4k

thanks i will put it on an sd card and test now

is there an easy way for me to upgrade the copy on internal nand

apart from installtointernal then restore a backup?

Quote from dtech

Shonk

The answer came sooner than I thought:

In newer Kodi versions, they have been replaced with the following, which no longer has a backport for Leia:
metadata.tvdb.com -> metadata.tvdb.com.python
metadata.themoviedb.org -> metadata.themoviedb.org.python
metadata.tvshows.themoviedb.org -> metadata.tvshows.themoviedb.org.python

I believe its broken in 19/20/21 etc and they have left it in for older builds 17/18

but at some point it may break as its not maintained anymore

once i added metadata.tvdb.com-3.3.0 the other day manually and selected it my TV Show's scanned just fine

Im quite shocked that nobody has noticed it tbh

my guess is not many people are using kodi for its intended purpose..

Quote from dtech

Sorry for the late answer...

This is not a LibreELEC specific issue, but there might be some confusion in the Kodi repo, I will try to find it and report it on GitHub to the Kodi devs.

Until then, you can access the latest version for Leia here: https://mirrors.kodi.tv/addons/leia/metadata.tvdb.com/

I would need a little more detailed information than that, because I don't know exactly what you mean by that.

When you start up kodi you get a popup in the top right

saying

Popup 1

Pulse-Eight CEC Adapter

Connecting to Pulse Eight CEC Adapter

Popup 2

Pulse-Eight CEC Adapter

Connected: TV RXV667

Here's the toast patch CoreElec use

Pulse Eight CEC pop up

It’s minimum since 9.2.2 not visible: You can also disable CEC in Kodi settings (libCEC).

discourse.coreelec.org

I dont know if you do requests

but if you do can i request that the cec popup's are suppressed

unless its an error

Whilst looking how i can disable it on every boot i ran into coreelec added a patch to suppress them unless there's an error

so you could most prob see what they did

I have moved both of my boxes to this buid as it seems solid and did installtointernal on both which went fine

H96 PRO+ 3GB 32GB CZ-S32-v2.2 gxm_q200_3g.dtb (Fixed bootloader to power back up from libreelec)

MXQ Pro 4K 1GB 8GB MXQ-S905-D16 v:1.0 Blue PCB hugsun factory firmware

gxbb_p201.dtb (Fixed bootloader to power back up from libreelec)

is gxm_q200_3g my best dtb? I have always used that in the past but dont know which one i should actually use

Are there builds for S912 gxm_q200_3g

H96 PRO+ 3GB 32GB
PCB CZ-S32-v2.2 20161012(A15)
QL 1730
JOB20170808 3+32/9377

1 x amlogic S912 OCTA-CORE BODGHN01404 J-TNA346.00
1 x 32GB Toshiba 19nm THGBMBG8D4KBAIR 170821AE EMMC HS400 V5.0 Read 270MB Write 90MB
1 x Fn-Link 8223A-SR COB009 1732 (QCA9377 433Mbps 1T1R 802.11a/b/g/n/ac BTLE 4.1)
1 x RTL8211F H6120H4 GH25 Gigabit Ethernet Transceiver
1 x GL850G HH4JB05Y22 713SGF9891 Genesys Logic 4 Port USB 2.0 Hub
2 x 1GB SpecTek 512X16DDR3 HL - FC4F 1708 / DY6L 1704 (SpecTek State 1600MHZ DDR3 1.5v) (rebadged Micron 512x16 DDR3L 1866 CL13)
2 x 512MB Micron 6EN77 D9SDD 3ZRJ (256X16 DDR3L 1866 CL13) D9SDD full PN=MT41K256M16LY-107:N

I have some bootloaders in my mega dump

https://mega.nz/folder/8qhRRaYJ#2ZA3VLjvLT6wg0IwsTF27g

in H96 Pro+ Firmware Fixed Uboot Power On Libreelec/Uboot Files

im not sure if i have them all as it was a fair few years ago

Hi i have been running Kazaq 8.2.2.3 since 2018 and have been very happy with it

Stable works well etc thats running off the internal 32gb emmc

I have tried newer builds once in a while but have never been fully happy with them in one way or another

Anyway i have done a fresh install of 9.2.8.12 on a microsd card to test it

It seems to be a solid build worthy of replacing the Kazaq build

apart from one issue im not sure you are aware of

On Amlogic Meson GXM (S912) (gxm_q200_3g) H96 Pro+ atleast

When scanning TV Shows it scans the folder's and adds the images for the folders

but never scans the files in the folders

when you go into the addons there is a typo on the TV Shows addon which is suspect is what's causing the problem

i think maybe people who have updated to this build instead of going straight to this build may not get this problem

See image atached

I have installed metadata.tvdb.com-3.3.0 and that is working fine (What i used on Kazaq 8.2.2.3)

It doesnt matter once it was updated even though it shows as disabled it works fine (After i rebooted)

I am running this on my H96 Pro+ CZ-S32-V2.2 3+32 (gxm_q200_3g.dtb)

It has been solid and everything has just worked and is 100% stable

and i have zero reason to update apart from the following

The Movie Database + The TVDB have stopped working

I updated them to 5.3.0 + 3.3.0 and they now say addon is marked as broken

I havnt really touched my boxes since around 2019 so im really out of the loop

does anyone know how i can fix the scrapers

Aparently The Stock Wisdom 20171120 uboot already has the ir code so works without having to flash

a custom uboot according to someone on freaktab

(will confirm this myself at some point by pulling the uboot and combinging it with aml_7.1.2_s912_q9377-S912_mac-20180409)

I also suspect the Beelink Mini M8s Pro uboot would work fine for

CZ-S32-V2 & CZ-S32-V3 users the remote looks almost the same as the H96 Remote

and Beelink do program the ir code on the gt1 ultimate atleast but that comes with a diff remote than h96

(will confirm this myself at some point by pulling the uboot and combinging it with aml_7.1.2_s912_q9377-S912_mac-20180409)

Working on my CZ-S32-v2.2 DDR3 Board

Whats the DDR4 Clocks on this uboot just out of interest

Quote from bumerc

u-boot@816Mhz_DDR3

i can test it at 816 if you make it..

Ok on looking into this further

The CZ-S32-v2.2 / v3 DDR3/DDD4 Uboot

Runs DDR3 @ 816MHz & Runs DDR4 @ 792MHZ

Can we get a Uboot with these stock frequency's to match

the factory Uboot

DQS-corr enabled

DDR scramble enabled

DDR3 chl: Rank0+1 @ 816MHz -

DDR3 chl: Rank0 @ 816MHz -

DDR3 chl: Rank0 16bit @ 816MHz -

DDR4 chl: Rank0+1 @ 792MHz -

otherwise we will be getting a small performance downgrade

from 816 to 792 on ddr3 devices with your uboot

ok it worked

and its powering on and off from the remote in le 8.2.2.3 kszaq build

can i get a link to your latest ddr3 uboot @ 792

just incase the one in S912_H96_3G_DDR34_171120_MAC_ubootfix

is an old build with problems

I pulled the 792mhz bootloader.PARTITION from S912_H96_3G_DDR34_171120_MAC_ubootfix

and im flashing it now combined in aml_7.1.2_s912_q9377-S912_mac-20180409