Posts by jnye6601

jnye6601 · At my wits end jnye6601 September 13, 2017 at 10:30 PM

Thanks all. AverMedia support responded today. They advise that said tuner is Windows compatible only. Any suggestions for a compatible tuner, or how to connect my box to a windows unit driving the tuner?

jnye6601 · At my wits end jnye6601 September 10, 2017 at 5:40 PM

BTW.... I am in Canada, and so the OTA signal we receive is ATSC. Signal reception for the AVerMedia products are listed here:

AVerTV Volar Hybrid Q | AVerMedia

jnye6601 · At my wits end jnye6601 September 10, 2017 at 5:22 PM

jCST

I looked at the logfile and the tuner does appear to be recognised by name. Very confused.

jnye6601 · At my wits end jnye6601 September 10, 2017 at 2:55 PM

I have the following:

RPi3 with LibreElec Beta 8.1.1 installed on a 16GB SD card.

Avermedia AverTV Volar Hybrid Q A837 USB TV Tuner (which does function properly on a Windows 10 machine)

TVheadend v. 3.4.27.1 from the LibreElec repository

Kodi recognises the tuner attached in the boot alerts: "CEC adapter: connected TV"

The TVheadend setup at localhost:9981 sees no tuner in the list.

1. Not sure if I need a powered USB hub to supply sufficient power to the tuner, or if there's a driver issue going on.

2. I'm also curious about the configuration of the add-on for the HTSP client. For the connection settings "Tvheadend hostname or IP address" the default is set to 127.0.0.1. If this unit is the host, then do I use the IP address my router assigns or just leave it. I know the 127.0.0.1 address is the internal adapter default.

All other functions of the system work fine and as normal.

Any suggestions are greatly appreciated as I've run through countless tutorials over the past three days with no luck. These questions are pretty much what I've narrowed the issue down too.