Demetris , thanks a lot for your releases!
Is there any release with BCM4335 wifi driver? My m8s+ has this wireless chip!
Posts by DS-1
-
-
The last try did the trick: i took an old 2gb microSD and used Rufus to out the latest 9.x release. It worked!
I Just don't understand why the others 16gb microSD work with 8.x Libreelec while don't with 9.x.
-
I have. No problems.
Unfortunately I still have filesystem issue. I've tested 9.0 releases in 3 different microSD cards, always on my S905X TX5 PRO and i always got this issue.
With 8.x releases never had a problem.
-
GDPR-2 , have you tested 9.0 with microSD? Thanks
-
Does the latest build contain BCM4335 wifi drivers?
Thanks a lot, you're amazing!!! -
Are you guys running 9.0 Libreelec thru microSD?
I always have "filesystem corruption" warning after the first reboot...even with the latest release!!!
I'm going crazy with this...never had a problem with 8.x releases... -
I've downloaded the 1.0.1 release.
Burnt the .img to the microSD with Rufus, Libreelec boots fine the first time.
Then, after the first reboot, it gives me the error in the pic.
Even with the 1.0.3, I have the same issue.
GDPR-2 have you tried this via microSD? Thanks
-
Netflix works here and it is working for others, could you try a fresh installation of everything.
The audio stream can be selected in the audio settings and then set to default as for your second issue as ChimeyJimmey says this is down to the inputstream addon settings.
That's very strange, I wonder if you have a hardware issue, I have tried running from the internal nand and a USB flash drive and not had that issue, I will try a microSD card later on tonight.
I've tried with two different microSD, always the same issue.
With 8.x never had a problem running thru microSD.
-
I've downloaded the 1.0.1 release.
Burnt the .img to the microSD with Rufus, Libreelec boots fine the first time.
Then, after the first reboot, it gives me the error in the pic.
-
DS-1 Extract the img.gz and download rufus and burn the image to your USB drive with that as I've just tried it and had no issues, an easier option and the way I update is to just place the tar file in the Update folder on the Windows share and reboot the device.
Ok, it works.
I've noticed that wifi is not working and the second reboot, after changing some things in the menu (such as language and stuffs like that) causes a filesystem corruption.
-
Be sure to download and rename the correct dtb.img for your device and place it on your microSD.
I copied dtb.img from 8.x S905X microSD to the 9.x microSD and the libreelec logo appears, but after a while it shows a mounting error (LIBREELEC_DISK can't be mounted).
-
Does RK3229 support Libreelec?!
-
There's a different way to make it boot on a S905X box?
8.x Libreelec boots normally, while this one (copied on a microSD using Libreelec sd creator) makes hang the box on the S905X logo! -
DS-1 Yes, this is correct. This makes suspend available in Kodi shutdown menu but not necessarily makes it work.
Ok, it works. I didn't understand that this makes suspend available in kodi menu. I was trying via remote power button and it shutted down.
Is there any way to remap remote power button to suspend/sleep?
-
-
Yes i know why is this, some boxes cant power on from remote when completely off(bootloader issue) so i preferred to force all to be in standby mode so everyone is happy camper.
Thanks for the reply!
Latest RC is very stable, i only have some issues with USB DTT but we know It is experimental.
-
8.2 rc3 installed to internal memory of my m8s+ (used the specific tar.gz release).
Everything works fine (except for wifi, but i already knew It - my m8s+ doesn't have the ap chipset), but when i turn It off LAN and USB DTT leds still remain on.
Anyone knows why of this?
Thanks a lot for tour amazing job!!!
-
M8S+ has an unsupported wifi chip which if i want to fix it i have to break all other Wifi chips as the bcm driver is different as the one we currently use.
So decide if you want support without wifi working am all in.
If not you stay at 8.0.2
Mean while if anyones has a patch so it works on current driver please come forward.
I believe that the support would be intersting even without wifi chipset, because of the use with ethernet port.
Thanks!