Posts by grizzly

  • Rotate screen on a intel nuc 5ppyh does not work.

    Yep that did it! (with HDMI-2)

    After i made an autostart.sh file that is.

    And i had no ide at all that lcd/display_rotate=2 was only for the pi but after you said that i did see that i was in "Config.txt - Tweaking the RPi" wiki.

    I did find that page trough google so had no idé it was pi only also took a better look now at the wiki and no mention at all about stuff like this for genericx86.

    And the hundreds off other sites/wiki/forum posts (i rarely post questions like this) i looked at for hours before making this tread since in many off them pi was never mentioned at all (sure a lot did but many did not).

    Alos many off them did mention various intel/amd/nuc/genericx86 some off them even said it worked fine with lcd/display_rotate on thoose.

    Therfore i had no ide that it was pi only.

    And thanks by the way!

  • Rotate screen on a intel nuc 5ppyh does not work.

    I know about the lcd_rotate=2 and display_rotate=2 in the boot.txt file (and yes i want a 180 rotation).

    I have tried both none work.

    If i install openelec (latest) on the nuc the display_rotate=2 do work (lcd_rotate does not).

    I have a rpi3 and display_rotate=2 works on both openelec and libreelec there (lcd-rotate does not work there either) but the rpi3 is used elsewhere and i only did a test (on the same screen that i need 180 rotation on).


    I did follow the guide from here.

    As in

    Code
    mount -o remount,rw /flash

nano /flash/config.txt

mount -o remount,ro /flash

reboot

    And on openelec it is the /boot/config.txt file that i add display_rotate=2 (or lcd_rotate=2) too.

    in libreelec there is no /boot folder and no config.txt file but tired adding thoose (did not work).

    There are also no config.txt file in the flash folder on libre so i add a config.txt file with only display_rotate=2 (or lcd) in it reboot (does not work).

    I have also tried adding all text from the config.txt file here and from what i remember looks the same as the one in openelec and then add display_rotate=2 (or lcd) at the bottom (also tried the same in /boot/config.txt) reboot.

    But that does not work either


    So what´s going on???

    Anyone have any idé for a solution?