Posts by Marciano

GDPR-1 i know you discontinued your builds but i only want to ask if deinterlace for ROCK64 with live tv (sd channels) will be fixed in official LE alpha?

I recieved mine yesterday and played a bit with your latest leia build and i noticed that deinterlacing is not working but i think this is a known issue for rock64.

Thanks

Quote from doc_bravn

What is your model of Arduino and which USB-UART chip is used in it? I have a model Arduino UNO R3 with a chip CH340G as USB-UART.

i have the same as you

My arduino baudrate runs great at 500000 with hyperion

I agree but i dont use android so i removed it.

The performance from internal compare to sd card is much better.

Quote from milhouse

The heatspreader does add 0.5mm-1mm height to the overall package however the FLIRC case includes a squishy thermal interface material that will accommodate the increased z-height of the Pi3+.

Any "heatsink" type case with zero tolerance (when using a Pi3) may have a problem with the Pi3+, but the FLIRC should be OK.

Edit: I've moved my Pi3+ into a FLIRC case and it fits without any problem. Temperature is reduced by 15-20C during 1080p HEVC playback.

I did the same with my pi 3b+ in a kodi flirc case and the temperature indeed reduced a lot

With these overclock settings the temperature doesn't get any higher then 62 degrees even with HEVC 1080p 10 bit files and netflix softwaredecoding. HEVC 1080p 10bit files and netflix sofwaredecoding plays really smooth

It's amazing.

arm_freq=1400
gpu_freq=500
over_voltage=2
force_turbo=1
sdram_freq=580
over_voltage_sdram=5
sdram_schmoo=0x02000020
dtparam=sd_overclock=100

Quote from lollo78

Hi,
I just see LibreELEC (Krypton) 8.2.4 MR – LibreELEC and bought the new Raspberry Pi 3B+.

Waiting for it, could you share more results of your private test?

Performance with HEVC 1080p -> bit?
Overclock capabilities?

...

Thanks a lot

i’m curious to this too.

I will receive mine tomorrow😁

Live TV is working fine now with rb-leia24

Finally no more stuttering.

GDPR-1

Btw i noticed that connect with CEC took ages with your new build.

Has something change with cec?

Thank you for new build this one runs really great on my ODROID C2!

Thanks!

Live tv stuttering and frameskips i a known issue

Quote from phil60

Has anyone had any luck booting from sd card with x96/s905x and can this box or any android box be booted from usb.I thought id bought a 1gb/8 box but storage and kodi are showing a 2gb/16 box so i might need to try a few divice trees .I believe maybe a sandisk ultra card will be good to try with.Would 8gb card be enough or would 16gb be best,

Thanks

i have a x96 Pro Xnano and it booted fine from sd card.

Do you have a X96 box or You have the same as me?

Quote from The Coolest

Marciano

I'm downloading one firmware now to check it. But really you need the fw of your exact box to check for the configuration of the driver.

Yes i know but that is the problem i can't find anyware stockfrimaware for x96 Pro Xnano

The Coolest if found this websit with all firmware for all those chinese boxe but i couldn't find my box.

Maybe you know what firmware you can use for the xnano?

Quote from The Coolest

Marciano

Thanks, but is this the xnano version?

I'll take a look at it later today.

The Coolest no sorry it’s not i’m looking further THE xnano

Quote from The Coolest

Marciano

Looks like they are using this driver\service in the X96 Pro Xnano, but the configuration must be hardcoded in the vfd driver, they are not using the DTB for the configuration.

If I could get my hands on the binary (should be something with 'vfd' in the name), perhaps I could find something out from that.

The Coolest I think i find a original rom for X96 here

The Coolest so if could extract the aml_vfd file from android there might be a chance to get it working?

Quote from The Coolest

Marciano

You can try giving this DTB a shot. Digging through some (albeit pretty old) source code, I found this potential configuration.

Might work, might not, no guarantees.

If the display lights up but doesn't look right, it can be sorted out, if it doesn't light up at all, then there's not much else to do.

Although a dmesg log could provide some details, if it doesn't work.

Thank you for digging to it but unfortunately it doesn't work.

Here is a dmesg.log

Thanks

Quote from The Coolest

Oh well, was worth a shot I guess.

yeah f...d up..

Sou you think there may is no solution for this box?

Quote from The Coolest

Marciano

Great, thanks.

Looks like a "bog standard" configuration, but without knowing the exact pins the display is connected to the SoC, it'll be difficult to guess.

Could you try to extract aml_vfd file from Android? I wonder if it could be decompiled to find out the pin configuration.

Sorry i removed android after extracting dtb

think i was to quick removiving android