Posts by erbas

Quote from balbes150

I don't have such hardware, so without a detailed startup log from the UART console, I can't help you in any way.

Well, I think that solves it. balbes150

RE: KI Pro (S905D) Need to debug log run UART

balbes150 Can you fix that?

The most recent images with extension eba do not boot, without boot.

LibreELEC-ARMv8.arm-9.80-devel-20201122113016-d174eba-amlgx.img.gz

Previous images that do not use the eba extension work perfectly, boot ok.

LibreELEC-ARMv8.arm-9.80-devel-20201120122659-4a64066-amlgx.img.gz

LABEL LibreELEC
  LINUX /KERNEL
  FDT /dtb/amlogic/meson-gxl-s905d-p230.dtb
  APPEND boot=LABEL=LIBREELEC disk=LABEL=STORAGE quiet console=ttyAML0,115200n8 console=tty0 systemd.debug_shell=ttyAML0

balbes150

I have a small problem with the initial configurations of LIbreELEC, SSH and samba.

I try to activate ssh or samba and it does not (insist on not activating)

arm64: dts: meson: add support for the WeTek Core 2

Still working few understand that it is a long work.

Thank you for the people who own this device.

Thank you. chewitt

kernel/git/torvalds/linux.git - Linux kernel source tree

Panfrost com Linux 5.10 para suportar GPU de Mali em SoCs Amlogic G12B

Panfrost With Linux 5.10 To Support Mali GPU On Amlogic G12B SoCs - Phoronix

Quote from buzzmarshall

I have begun a 9.2 build by moving the Amlogic project back into the 9.2 project and am in the middle of regressing kodi down to the current 18.8 version just to see if it will work...

You can share this construction!

Knowledge and little to do.

Thank you.

can anyone bring any news about the amlogic constructions!

I tried a construction I get errors, impossible to build a test.

Construction with day version: 20200911

tried a transmission with raspberry + tbs for the same using tvheadend htsp client the same crashes without audio or video. (With green screen)

I tried youtube addon same errors: locking the box, only and possible unplugging.

If you go through the audio configuration the box will fire with a noise (hum), if you select the audio correctly everything will return to normal.

Construction with day version: 20200914

error when trying to enter the libreelec repository, it is impossible to install any addon.

The errors on the screen on the usb remain, the box restarts 3 or 4 times to boot, more usb now works.

It certainly WILL NOT WORK because you are not using LibreELEC!

Change bootscreen image - Installation & Booting - CoreELEC Forums

Still stuck on the boot screen.

Error in usb not allowing me to start box.

balbes150 Thank you

chewitt I wonder if the constructions LibreELEC-AMLGX.arm-9.80-nightly-20200809-63dfb3b-box.img.gz

Last construction will be updated: 20200809

Thank you.

Edits made as mentioned above for mecool KI Pro: ok boot

I immediately received an error, which apparently and in the usb usb ports do not work to complete the installation with usb remote.

Can help balbes150

LABEL LibreELEC
  LINUX /KERNEL
  FDT /dtb/amlogic/meson-gxl-s905d-p230.dtb
  APPEND boot=LABEL=LIBREELEC disk=LABEL=STORAGE quiet console=ttyAML0,115200n8 console=tty0 systemd.debug_shell=ttyAML0

There is no dtb suitable for K1 Pro as in previous builds, I used meson-gxl-s905d-p230.dtb

balbes150 my apologies for posting here, everything is part because it is about development! Their DVB modules are also disabled.

I build it: PROJECT = Amlogic DEVICE = AMLGX ARCH =

My problem is when I try to build with active DVB modules. CvH

LibreELEC.tv/options at master · LibreELEC/LibreELEC.tv · GitHub

chewitt I get errors, Is it possible to align the modules with the kernel? or we still have a lot of work!

Quote from DoktorX

this setup for libreelec is complicated, on coreelec i create sd card put card in box and its working

Feel free to use whatever you want!

I don't think you read the post: Test LibreELEC images with KODI-19 for S9xxx

Everything here is in tests we use the latest kernel!

We are development supporters!

These buildings may not be for you.

I don't know how to help, here I use my cell phone on the same network!

or wireless keyboard with usb adapter.

Quote from DoktorX

but i cant get to ssh since i cant finish gui setup on kodi and enable ssh i can only access samba share on the box

Use your mobile with remote kodi APP!

Quote from DoktorX

ok so first problem that i solved was that i was unable to boot libreelec image in the first place and then i figure out that i need to run aml_autoscript.zip but that did not work so i reflashed my box firmware and i was able to use aml_autoscript.zip file and boot to libreelec.

But now i cant use remote and i'm not sure if my dtb file is correct i used meson-gxm-q201.dtb but remote is not working i have try to add file remote.conf from coreelec sdcard root to libreelec sdcard root but this is not working

Everything here is totally different from CoreELEC if you need support for CoreELEC.

Make a brief reading of the first post!

2. The start system in Coreelec is not compatible with LibreELEC, Armbian etc. If you run coreelec on your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of the standard firmware via the USB Burn Tool and the new activation of the universal multi-boot, which is used in all new systems.

Test LibreELEC images with KODI-19 for S9xxx

Try using the KI Pro files! (control and the same model)

copy rc_maps.cfg to /storage/.config
copy mecool to /storage/.config/rc_keymaps

Just restart the box.

If it doesn't work, check if the files are white and blank, just copy and paste manually.

mecool k1 pro (2).zip

Quote from DoktorX

Ok so i dont get a'm i stupid of what, but how do i run this on my mecool pro l (s912)?

I have downloaded and burn sd card with LibreELEC-ARMv8.arm-9.80-devel-20200626140824-569f834-amlgx.img image file and put that sd card back in tv box and when i power on tv box i see mecool logo and then i start boot android, i have try to press menu button on remore when box is booting in order to boot from sd card but nothing is working

ps

i can boot coreelec from sd card so i know that sd card reader on tv box is working

Please note that the DTB configuration order has changed.

Now a single configuration method is used for all Rockchip Allwinner Amlogic platforms. The file (uEnv.txt) is used for configuration DTB all platforms.

Now a single configuration method is used for all platforms, using the file (uEnv.txt). You need to edit this file to configure it. You need to uncomment the two lines that are responsible for your platform and specify the correct DTB for your model. If you use this image to run on the one platform, you can delete it from the settings file (uEnv.txt) strings from other platforms.

Test LibreELEC images with KODI-19 for S9xxx

Edit the file (uEnv.txt)

Place the model for your box.

Here as an example: meson-gxl-s905x-p212.dtb

FDT=/dtb/amlogic/meson-gxl-s905x-p212.dtb
LINUX=/KERNEL
APPEND=boot=LABEL=LIBREELEC disk=LABEL=STORAGE quiet console=ttyAML0,115200n8 console=tty0 systemd.debug_shell=ttyAML0

If universal multiple upload has not yet been enabled on this device

Single Armbian image for RK + AML + AW (aarch64 ARMv8) - TV boxes - Armbian forum