Может быть вы знаете Русский язык?
no sorry, i don't speak Russian.
Может быть вы знаете Русский язык?
no sorry, i don't speak Russian.
sorry for my English
np, i'm not fluent in english too.
but about the gz, it boots on my device.
try this one : it's older but the initramfs is slightly different.
by the way how did you write the SD?
i'm using LibreELEC.USB-SD.Creator
have you try a fresh install (on a SD) or an update?
you need to be balbes150 universal boot "ready" to use my images
installtointernal isn't working => you need to boot from SD or USB
ps: i'm using daily the x8-h (this is why i'm doing my own image)
Thanks for the update.
Can be installed on internal eMMC?
Thanks
nope same problem as here : refresh "initramfs | initramfs.cpio"
datrh, thanks for your hardwork!
Tell me please, in this build does STANDBY mode work?
if you push the power-off/on on the minix remote, you will have the option to shutdown or reboot.
if you choose "shutdown" , a shutdown signal will be send to your TV.
Later if you put your TV "on" and choose the Minix entry, the Minix will start up.
The minix doesn't goes in "shutdown", it stay in sort of "standby".
#1 will be update soon
Can be installed on internal eMMC?
need to retest, i will let you know
Lakka (based on the latest LE)
X8-X8H GZ : https://www.mediafire.com/file/n43jwskb9g2tihs/lakka-x8-x8h.arm-9.0-devel-20181111163347-56baa6e.img.gz/file
info :
not working:
~$ connmanctl
connmanctl> scan wifi
Scan completed for wifi
connmanctl> services
(you will see a list of the ssid in your surrounding)
connmanctl> agent on
Agent registered
connmanctl> connect wifi_xxxxxx_managed_psk (~ your wifi ssid)
Agent RequestInput wifi_xxxxxxxx_managed_psk
Passphrase = [ Type=psk, Requirement=mandatory ]
Passphrase? *************
Connected wifi_xxxxxxxx_managed_psk
connmanctl> quit
Display More
given as is , don't expect support
if you have windows 10 :
it's the same as a windows 20xx server
So....
lessons learned : make clean , retry and if the problem comes again => ask for help
image: creating file LibreELEC-X8-X8H.arm-9.0-devel-20180803120338-c3b0baa.img...
image: creating msdos partition table...
image: creating part1...
image: creating part2...
image: creating filesystem on part1...
image: creating bootloader configuration...
image: copying files to part1...
image: extracting part2 from image...
image: creating filesystem on part2...
image: populating filesystem on part2...
image: merging part2 back to image...
image: extracting part1 from image...
image: checking filesystem on part1...
image: compressing...
image: cleanup...
lgr@ubuntu18:~$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 18.04.1 LTS
Release: 18.04
Codename: bionic
running in hyper-v vm
ps : don't waste your time right now , i will try first a make clean and a make image
doesn't seems that there were big changes to libtool pkg.
gonna update ubuntu and "make clean" to see if it help
hi,
anyone else having had the same error and having solved it?
arch=arm
regards
AUTORECONF libtool
autoreconf: Entering directory `/home/lgr/http://LibreELEC.tv/build.LibreELEC-X8-X8H.arm-9.0-devel/libtool-2.4.6'
autoreconf: configure.ac: not using Gettext
autoreconf: running: /home/lgr/http://LibreELEC.tv/build.LibreELEC-X8-X8H.arm-9.0-devel/toolchain/bin/aclocal -I /home/lgr/http://LibreELEC.tv/build.LibreELEC-X8-X8H.arm-9.0-devel/toolchain/armv7a-libreelec-linux-gnueabi/sysroot/usr/share/aclocal -I /home/lgr/http://LibreELEC.tv/build.LibreELEC-X8-X8H.arm-9.0-devel/toolchain/armv7a-libreelec-linux-gnueabi/sysroot/usr/share/aclocal --force -I m4
autoreconf: configure.ac: tracing
autoreconf: running: /home/lgr/http://LibreELEC.tv/build.LibreELEC-X8-X8H.arm-9.0-devel/toolchain/bin/libtoolize --copy --force --ltdl
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'build-aux'.
libtoolize: copying file 'build-aux/compile'
libtoolize: copying file 'build-aux/config.guess'
libtoolize: copying file 'build-aux/config.sub'
libtoolize: copying file 'build-aux/depcomp'
libtoolize: copying file 'build-aux/install-sh'
libtoolize: copying file 'build-aux/missing'
libtoolize: copying file 'build-aux/ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
libtoolize: copying file 'm4/libtool.m4'
libtoolize: You should add the contents of 'm4/libtool.m4' to 'aclocal.m4'.
libtoolize: copying file 'm4/ltargz.m4'
libtoolize: You should add the contents of 'm4/ltargz.m4' to 'aclocal.m4'.
libtoolize: copying file 'm4/ltdl.m4'
libtoolize: You should add the contents of 'm4/ltdl.m4' to 'aclocal.m4'.
libtoolize: copying file 'm4/ltoptions.m4'
libtoolize: You should add the contents of 'm4/ltoptions.m4' to 'aclocal.m4'.
libtoolize: copying file 'm4/ltsugar.m4'
libtoolize: You should add the contents of 'm4/ltsugar.m4' to 'aclocal.m4'.
libtoolize: copying file 'm4/ltversion.m4'
libtoolize: copying file 'm4/lt~obsolete.m4'
libtoolize: You should add the contents of 'm4/lt~obsolete.m4' to 'aclocal.m4'.
libtoolize: putting libltdl files in LT_CONFIG_LTDL_DIR, 'libltdl'.
libtoolize: copying file 'libltdl/COPYING.LIB'
libtoolize: copying file 'libltdl/Makefile.am'
libtoolize: copying file 'libltdl/README'
libtoolize: copying file 'libltdl/configure.ac'
libtoolize: copying file 'libltdl/aclocal.m4'
libtoolize: copying file 'libltdl/Makefile.in'
libtoolize: copying file 'libltdl/config-h.in'
libtoolize: copying file 'libltdl/configure'
libtoolize: copying file 'libltdl/libltdl/lt__alloc.h'
libtoolize: copying file 'libltdl/libltdl/lt__argz_.h'
libtoolize: copying file 'libltdl/libltdl/lt__dirent.h'
libtoolize: copying file 'libltdl/libltdl/lt__glibc.h'
libtoolize: copying file 'libltdl/libltdl/lt__private.h'
libtoolize: copying file 'libltdl/libltdl/lt__strl.h'
libtoolize: copying file 'libltdl/libltdl/lt_dlloader.h'
libtoolize: copying file 'libltdl/libltdl/lt_error.h'
libtoolize: copying file 'libltdl/libltdl/lt_system.h'
libtoolize: copying file 'libltdl/libltdl/slist.h'
libtoolize: copying file 'libltdl/loaders/dld_link.c'
libtoolize: copying file 'libltdl/loaders/dlopen.c'
libtoolize: copying file 'libltdl/loaders/dyld.c'
libtoolize: copying file 'libltdl/loaders/load_add_on.c'
libtoolize: copying file 'libltdl/loaders/loadlibrary.c'
libtoolize: copying file 'libltdl/loaders/preopen.c'
libtoolize: copying file 'libltdl/loaders/shl_load.c'
libtoolize: copying file 'libltdl/lt__alloc.c'
libtoolize: copying file 'libltdl/lt__argz.c'
libtoolize: copying file 'libltdl/lt__dirent.c'
libtoolize: copying file 'libltdl/lt__strl.c'
libtoolize: copying file 'libltdl/lt_dlloader.c'
libtoolize: copying file 'libltdl/lt_error.c'
libtoolize: copying file 'libltdl/ltdl.c'
libtoolize: copying file 'libltdl/ltdl.h'
libtoolize: copying file 'libltdl/slist.c'
libtoolize: Remember to add 'LTDL_INIT' to configure.ac.
autoreconf: running: /home/lgr/http://LibreELEC.tv/build.LibreELEC-X8-X8H.arm-9.0-devel/toolchain/bin/autoconf --include=/home/lgr/http://LibreELEC.tv/build.LibreELEC-X8-X8H.arm-9.0-devel/toolchain/armv7a-libreelec-linux-gnueabi/sysroot/usr/share/aclocal --force
autoreconf: running: /home/lgr/http://LibreELEC.tv/build.LibreELEC-X8-X8H.arm-9.0-devel/toolchain/bin/autoheader --include=/home/lgr/http://LibreELEC.tv/build.LibreELEC-X8-X8H.arm-9.0-devel/toolchain/armv7a-libreelec-linux-gnueabi/sysroot/usr/share/aclocal --force
autoreconf: running: /home/lgr/http://LibreELEC.tv/build.LibreELEC-X8-X8H.arm-9.0-devel/toolchain/bin/automake --add-missing --copy --force-missing
automake: error: cannot open < libltdl/ltdl.mk: No such file or directory
autoreconf: /home/lgr/http://LibreELEC.tv/build.LibreELEC-X8-X8H.arm-9.0-devel/toolchain/bin/automake failed with exit status: 1
Makefile:12: recipe for target 'image' failed
make: *** [image] Error 1
this img has the same base as the minix X8-H+ so what follow must be also true :
Auto Adjust Display Refresh Rate => patched and now works (kodi whitelist behaviour)
Audio fixed
Kodi commit 37f55e6 (11/06/2018)
Kodi binary-addons updated (inputstream-adaptive,etc)
tar available on request
feedbacks are welcome
except that audio (any source) is presented with a terrible cracking / static.
i've got the same kind of troubles with my arm build.
had to patch amlogic drivers to solve it.
something related to sound drivers
Hi i've trouble with nss.
i'm using a "clean fork" (means no changes applies to LE source files, just a few patches to the amlogic drivers)
/home/lgr/http://LibreELEC.tv/build.LibreELEC-X8-X8H.arm-9.0-devel/toolchain/armv7a-libreelec-linux-gnueabi/sysroot/usr/lib/libsqlite3.a(sqlite3.o): In function `fts5Bm25Function':
sqlite3.c:(.text+0x258ec): undefined reference to `log'
collect2: error: ld returned 1 exit status
make[3]: *** [../../coreconf/rules.mk:291: Linux4.4_arm_armv7a-libreelec-linux-gnueabi-gcc-8.1.0_glibc_PTH_OPT.OBJ/libsoftokn3.so] Error 1
make[3]: Leaving directory '/home/lgr/http://LibreELEC.tv/build.LibreELEC-X8-X8H.arm-9.0-devel/nss-3.37.1/nss/lib/softoken'
make[2]: *** [../coreconf/rules.mk:101: libs] Error 2
make[2]: Leaving directory '/home/lgr/http://LibreELEC.tv/build.LibreELEC-X8-X8H.arm-9.0-devel/nss-3.37.1/nss/lib'
make[1]: *** [coreconf/rules.mk:101: libs] Error 2
make[1]: Leaving directory '/home/lgr/http://LibreELEC.tv/build.LibreELEC-X8-X8H.arm-9.0-devel/nss-3.37.1/nss'
Makefile:12: recipe for target 'image' failed
make: *** [image] Error 2
is it something related to sqlite build shared by HiassofT · Pull Request #2760 · LibreELEC/LibreELEC.tv · GitHub ?
best regards
only the gz, just test and let me know
the image use Balbes150 bootloader script (kudos to him)
Recently I had some problems with it, but I flashed the android firmware again and now everything is fine again. Seems doiing the toothpick method to much for different AML_AUTOSCRIPTS corrupts uboot after a while...
interesting ... thanks for having share your findings with the community