Posts by chocho

chocho · Tanix TX6 chocho June 29, 2019 at 1:38 PM

Thanks for warning, but I'll use it with 1080p TV and mainly for SD Live TV.

One more question. On what depending ethernet to start working.

chocho · Tanix TX6 chocho June 29, 2019 at 1:23 PM

Awesome, now detected RAM is 2GB.

Here is the log:

Test.txt

chocho · Tanix TX6 chocho June 29, 2019 at 11:23 AM

I saw now that detected RAM is 1GB

chocho · Tanix TX6 chocho June 29, 2019 at 11:17 AM

Tested with both u-boot files and works with both.

Found a HDMI to DVI cable to connect to monitor and kodi is loaded.

Below are boot and dmesg logs, as test1 is with first u-boot.

Test1.txt

Test2.txt

chocho · Tanix TX6 chocho June 29, 2019 at 9:16 AM

Sorry for delay, but I had to go to work. IT emergency

There is a change, but still doesn't boot :

Code

U-Boot SPL 2019.04 (Jun 29 2019 - 09:40:19 +0200)
DRAM:Bonding ID: 7
DRAM PHY PGSR0 = 40007d
DRAM PHY DX0RSR0 = 2
DRAM PHY DX1RSR0 = 2
DRAM PHY DX2RSR0 = 3
DRAM PHY DX3RSR0 = 3
Unsupported DRAM configuration: column number invalid

resetting ...

U-Boot SPL 2019.04 (Jun 29 2019 - 09:40:19 +0200)
DRAM:Bonding ID: 7
DRAM PHY PGSR0 = 40007d
DRAM PHY DX0RSR0 = 2
DRAM PHY DX1RSR0 = 2
DRAM PHY DX2RSR0 = 3
DRAM PHY DX3RSR0 = 3
Unsupported DRAM configuration: column number invalid

resetting ...

Display More

chocho · Tanix TX6 chocho June 29, 2019 at 5:20 AM

@jernej Unfortunately it doesn't work. Here is the boot lines:

Code

U-Boot SPL 2019.04 (Jun 28 2019 - 23:15:46 +0200)
DRAM:This DRAM setup is currently not supported.

resetting ...

U-Boot SPL 2019.04 (Jun 28 2019 - 23:15:46 +0200)
DRAM:This DRAM setup is currently not supported.

resetting ...

If you want compile only u-boot and I'll flash it on top on this image.

chocho · Tanix TX6 chocho June 28, 2019 at 8:54 PM

Yes, I will test your images.

And thanks for support !

chocho · Tanix TX6 chocho June 28, 2019 at 4:52 PM

One question. Is it fdt file actually the device tree ?

Because I was able to convert it with dtc

chocho · Tanix TX6 chocho June 28, 2019 at 4:44 PM

Lets try to upload it here :

fdt.zip

chocho · Tanix TX6 chocho June 28, 2019 at 4:08 PM

Attached archive is the content of that dir:

MEGA

chocho · Tanix TX6 chocho June 28, 2019 at 3:53 PM

Yes, there it is, but for what to look :

Code

:/sys/firmware/devicetree/base # cd
#address-cells                          model
#size-cells                             n_brom/
__symbols__/                            name
aliases/                                opp_dvfs_table/
chosen/                                 pmu/
clocks/                                 prcm/
compatible                              psci/
cpus/                                   s_brom/
dram/                                   s_cpuscfg/
dramfreq/                               soc@03000000/
firmware/                               sram_a1/
gpu@0x01800000/                         sram_a2/
interrupt-controller@03020000/          sram_ctrl/
interrupt-parent                        sunxi-chipid@03006200/
iommu@030f0000/                         sunxi-sid@03006000/
ion/                                    timer_arch/
memory@40000000/                        uboot/

Display More

chocho · Tanix TX6 chocho June 27, 2019 at 8:16 PM

@jernej I was able to get image with adb pull, but I don't have time to upload full image. So that archive contains all partitions without UDISK.img (12GB)

If you need full image please let me know.

MEGA

chocho · Tanix TX6 chocho June 27, 2019 at 5:16 PM

Flashed that image, but still doesn't work.

Enter in serial console and executing the command give me :

Code

console:/ $ busybox devmem 0x3006100
devmem: can't open '/dev/mem': No such file or directory

I was able to get boot.img, but extraction give me errors.

Little clarification, boot to android without connected HDMI

chocho · Tanix TX6 chocho June 27, 2019 at 4:38 AM

Yes, I used exactly the same image.

Also tried to build the u-boot with mailine ATF and sunxi-h6-ddr3 branch of apritzel u-boot.

The resul is the same.

chocho · Tanix TX6 chocho June 26, 2019 at 9:45 PM

Thanks,

That's was my first try with img from 15.06 and after unsuccessful boot I opened the box and connect UART

chocho · Tanix TX6 chocho June 26, 2019 at 9:14 PM

Quote from ukmark62

Extract zip file here Tanix TX6 H6 Testing.zip and then

Nope, still can't get there

Code

U-Boot SPL 2018.11-g7702a7c-dirty (Jun 10 2019 - 21:29:56 +0100)
DRAM:This DRAM setup is currently not supported.

resetting ...

U-Boot SPL 2018.11-g7702a7c-dirty (Jun 10 2019 - 21:29:56 +0100)
DRAM:This DRAM setup is currently not supported.

resetting ...

U-Boot SPL 2018.11-g7702a7c-dirty (Jun 10 2019 - 21:29:56 +0100)
DRAM:This DRAM setup is currently not supported.

resetting ...

Display More

This is the boot log from android:

Boot Android

chocho · Tanix TX6 chocho June 26, 2019 at 7:48 PM

Apparently there is difference between TX6 and TX6 mini, because can't boot.

Code

U-Boot SPL 2019.04 (Jun 15 2019 - 17:53:19 +0200)
DRAM:This DRAM setup is currently not supported.

resetting ...

U-Boot SPL 2019.04 (Jun 15 2019 - 17:53:19 +0200)
DRAM:This DRAM setup is currently not supported.

resetting ...

U-Boot SPL 2019.04 (Jun 15 2019 - 17:53:19 +0200)
DRAM:This DRAM setup is currently not supported.

resetting ...

Display More

I made a pictures of board:

pic1

pic2

If I only can remember how to extract DT from running android ....

chocho · Tanix TX6 chocho June 26, 2019 at 4:39 PM

I bought Tanix TX6 mini and I get this:

Tanix TX6 mini

Amlogic hardware - sun50iw6p1