I can't comment on that, I've never encountered such a bug so far.
Don't worry all is grand even with this "feature";)
Will try to copy my old confluence skin from kodi 15 as i think it is related to skin(but on default skin it's missing as well) - but tbh with you i don't care about it can live without it:)
There is a new snapshot image exclusively for "Universal-n200-S812_2G-AP6330" devices: Index of /snapshots/20210910/
I forgot that some clones are soldered with pretty slow NAND at the factory.
Will test it now.
It's working fine - no issue with hdd or wifi . Wifi looks fine - speed not the best - around 900KB/s-1200KB/s but max i was getting before was around 1,5MB/s so good enough.
Only thing that is not working so far is that i can't download new skin - it just exit when i click get more.
Ok i can download new skin but it took some time before i was able to connect to that server, i was able to browser all repo's and after that it let me change(download) new skin.
The other thing is volume bar - it's missing with every skin - how to fix it?
Let's give it a try: I'm going to replace the platform_init script with the fixed version on the MXIII-S8X2 branch as well.
When the new snapshot image has been compiled, I will send you a link.
No problem i can check it anytime.
Well, I would be wondering which image was the working one. Can you send a link?
The same solution... But this is not really a solution, it is rather just a bypass.
Index of /3rdParty/S8X2/Universal-n200-S812_2G-AP6330/ this one is the one with working wifi and no movie freeze as well after changin resolution in settings.
I know it is just a quick fix and not a proper solution but better then nothing.
Install to nand(no problems while installing) boots for ages so will use SD card as before.
Display MoreThat does not sound very good. You would need the original bootloader for the device.
I don't know what was changed in it, but that may be the main reason for the SDIO wifi chip recognition error.
The problem is that there are plenty of clones out of these. To determine the exact type, you need to disassemble the box and search for the factory firmware based on the PCB ID. But, if you are absolutely sure you have the factory ROM, you should restore it.
Until you restore the original boot loader on the device, unfortunately I can't help you.
In my LE versions, no modification is required for dual boot if the installation is done using the toothpick method.
After installation the aml_autoscript ensures that the boot from the SD card is always active when it is plugged into in the box.
But if all goes well, you can also install LE into the internal NAND with the installtointernal script that replaces Android, so you don't need an external SD card anymore.
I would ask if I can still count on your test or forget it all? Because I've been waiting a couple of days and you haven't answered yet.
It would be important because if you don’t want to help me anymore, I need to look for another user with an X8-H Plus.
I found stock firmware for it - flashed it now(with bootloader) and will try to run LE from Sd card.
It didn't change(tried 101,106 FW) anything but i found a solution for n200(the one with working wifi) LE :
If you have freeze when stopping video, in the kodi PLAYER / VIDEO settings have
Adjust display refresh rate to always and leave your kodi SYSTEM / DISPLAY resolution at 1280x720pCredits: GJayJayG
and it is sorted now, now problems at all:)
Thank You
Display MoreSD\VID_02D0&PID_4330 == Ampak AP6330
Something is broken in your device, because you are the first MXIII user who indicate the freeze problem.
Didn't you accidentally crossflash with a wrong Android firmware earlier which is not fully compatible with your device?
The M8S+ wireless stack was modified in v9.2.7. It means the dhd module loads statically instead of the wifi_dummy service.
So, your module load failure with M8S+ image may be occoured by the dhd module.
The only reason is your current bootloader (uboot) cannot handle your integrated AP6330 correctly, because probably it is not the original one.
I think firmware was taken from Tronsmart - MXIII Plus_108L1_SD_160604 as box is just another clone(i think they didn't make any newer firmware for it) - i still have first FW for it so might try to flash it tomorrow unless there is another way to fix it?
I think bootloader at this moment is this one OpenELEC-Amlogic.MX3G-L106.arm-bootloader(but don't have any idea how to check it) used to gain dual boot and boot from nand in kodi.
So yes it might be all mixed up but the box is working perfectly fine with no issues - i just boot it directly into Openelec and don't use android from nand basically at all.
I have a problem with MXIII 4k (s812,2gb). Box ID m8m2_n200_2G, Amlogic Meson8(in openelec)
It's either wifi not working(here using old Openelec build from Demetris
OpenELEC:~ # cat /sys/class/net/wlan0/device/vendor
0x02d0
OpenELEC:~ # cat /sys/class/net/wlan0/device/device
0x4330
looks like it's CHIPSET='Broadcom 4330'
or picture freeze when trying to skip.
Wifi is working fine with LibreELEC-n200-AP6330_2G.arm-9.2.8.1.img (but picture freeze after skip)
LibreELEC-M8S-Plus.arm-9.2.8.1.img from august(won't boot: A start job is running for load kernel modules/for Wait for kernel time synchronized - time counts up) - it will boot after good 5 minutes(looks like every time it take few minutes), hdd needs to be reconnected as won't see it(on every boot) - but no freeze problem, wifi not working.
LibreELEC-MXIII-Plus.arm-9.2.8.1.img - no wifi detected,movie freeze)
LibreELEC-MXIII-Plus.arm-9.2.8.2.img (snapshot 01.09) - no wifi, freeze
LibreELEC-MXIII-Plus.arm-9.2.8.2.img (snapshot 06.09) - no wifi, freeze
LibreELEC-X8-X8H.arm-9.2.8.2.img (snapshot 08.09) - not working
HDD is external USB 3.0 WD password 2TB.
Images installed with Etcher to sd card and booted from sd card. Any way to fix it?
I had a problem with CEC so went back to OE 6.0.3 and all problems gone.
Removed remix and put 108 firmware.
I have small problem with 115K4 firmware on genuine 812 4k box - MXIII G. I installed firmware - what looked like without any problems but i can't boot inside android(stuck on 127.0.0.1 splash) but booting libreelec 8.2.2 from Demetris works well - i assume as it looks like it is not booting all the time but will have to check that.
Should I connect box to pc and update from there using usb burning tool or something else might be wrong - i had Tronsmart MXIII Plus_106L1_151029 before update.
OK Got it sorted by trying again with remix with nocompat file(maybe it helped) or maybe wipe and istall using twrp. Now all works perfect.
So power off is not working the way it should on remix - or not for me - can't power off, i have to press power switch to switch it off from that state - otherwise i have red/blue/red and nothing going on.
Installed 108l1 firmware and now power off works the way it should:)
