do I need to be inside a certain folder when I do this first?
In LibreELEC folder. Same as when you build image.
Posts by vpeter
-
-
After the image is build you need to create addon
CodePROJECT=Generic ARCH=x86_64 ./scripts/create_addon pvr.mythtv -
Install system tools addon and capture traffic with tcpdump. And then analyze it.
-
xrandr won't work with Amlogic.
Ups, missed this very important info
-
Try xrandr command.
-
.kodi folder is on second EXT4 partition which is not visible on Windows.
-
Will do if user come back. Thanks for looking.
-
It was Generic 8.0.2.
Setting protocol directly give same error.
Tuner is TeVii S482: TeVii S482 - LinuxTVWiki
dmesg: TSXB
ir-keytable: QIfh
strace ir-keytable: fgIJ
-
In file packages/security/openssl/package.mk add
Codeexport MAKEFLAGS="-j1" -
HiassofT: you have any idea why protocol can't be set? There is a user on IRC with same problem.
His ir-keytable -v output:
Code
Display MoreFound device /sys/class/rc/rc1/ Found device /sys/class/rc/rc0/ Input sysfs node is /sys/class/rc/rc1/input18/ Event sysfs node is /sys/class/rc/rc1/input18/event12/ Parsing uevent /sys/class/rc/rc1/input18/event12/uevent /sys/class/rc/rc1/input18/event12/uevent uevent MAJOR=13 /sys/class/rc/rc1/input18/event12/uevent uevent MINOR=76 /sys/class/rc/rc1/input18/event12/uevent uevent DEVNAME=input/event12 Parsing uevent /sys/class/rc/rc1/uevent /sys/class/rc/rc1/uevent uevent NAME=rc-tevii-nec /sys/class/rc/rc1/uevent uevent DRV_NAME=dw2102 input device is /dev/input/event12 /sys/class/rc/rc1/protocols protocol nec (disabled) Found /sys/class/rc/rc1/ (/dev/input/event12) with: Driver dw2102, table rc-tevii-nec Supported protocols: nec Enabled protocols: Name: IR-receiver inside an USB DVB re bus: 3, vendor/product: 9022:d484, version: 0x0000 Input sysfs node is /sys/class/rc/rc0/input15/ Event sysfs node is /sys/class/rc/rc0/input15/event10/ Parsing uevent /sys/class/rc/rc0/input15/event10/uevent /sys/class/rc/rc0/input15/event10/uevent uevent MAJOR=13 /sys/class/rc/rc0/input15/event10/uevent uevent MINOR=74 /sys/class/rc/rc0/input15/event10/uevent uevent DEVNAME=input/event10 Parsing uevent /sys/class/rc/rc0/uevent /sys/class/rc/rc0/uevent uevent NAME=rc-tevii-nec /sys/class/rc/rc0/uevent uevent DRV_NAME=dw2102 input device is /dev/input/event10 /sys/class/rc/rc0/protocols protocol nec (disabled) Found /sys/class/rc/rc0/ (/dev/input/event10) with: Driver dw2102, table rc-tevii-nec Supported protocols: nec Enabled protocols: Name: IR-receiver inside an USB DVB re bus: 3, vendor/product: 9022:d483, version: 0x0000 Repeat delay = 500 ms, repeat period = 125 ms Repeat delay = 500 ms, repeat period = 125 ms -
Some watchdog daemon which would restart kodi or whole system would be nice. I think in the past we already have this included. Not sure why this functionality was removed.
-
-
But kodi will not build anyway.
Or maybe there were some kodi changes already.
-
Known issue - kodi needs some imx6 changes. ETA unknown.
-
Mine result - HDMI connected directly to TV.
Code
Display MoreLibreELEC (community/vpeter) Version: 8.0.2 LibreELEC:~ # cat /sys/devices/soc0/soc.0/20e0000.hdmi_video/cable_state plugin HDMI LibreELEC:~ # cat /sys/devices/soc0/soc.0/20e0000.hdmi_video/uevent DRIVER=mxc_hdmi OF_NAME=hdmi_video OF_FULLNAME=/soc/hdmi_video@020e0000 OF_COMPATIBLE_0=fsl,imx6q-hdmi-video OF_COMPATIBLE_N=1 MODALIAS=of:Nhdmi_videoT<NULL>Cfsl,imx6q-hdmi-video -
Yes, all v8 images has same kernel version.
-
I could make few builds between 8.0.1 and 8.0.2 to figure out when some change happen.
-
