Posts by highball

duck7000 Thanks for your help... I found something similar in the KODI forum and the following commit changed the standard behavior from "shutdown" to open "shutdownMenu" instead... https://github.com/xbmc/xbmc/comm…933fd23083fa54b

You can use the remote.xml and change the <power> value back to "shutdown()"

Hi, I am using LibreELEC for some years now on different systems. After the last Update to 11.0.4 something changed in combination with my Harmony Hub Remote control. Now LibreELEC does not shut down, instead only the Power Menu is opened... everything is normally turned off, so I get now chance to shut KODI/LibreELEC down. I am noot sure if something was changed in LibreELEC or in KODI and if I can configure this somewhere?!?! Maybe someone can give me a hint?

I have a Intel NUC and the Harmony uses the build in IR Receiver to fully control the System (On/OFF (till now) and full control inside of KODI)... only the shutdown process seams to be changed so that the PC is still on

Many thanks in advance

This was also suggested in the thread I found, but I think this can only be a workaround... because I cannot install libreelec with this combination again... actually I have my old FulHD TV for new installations, but I do not want to keep it...

Hi, thanks for your response and yes... it is actually connected to the HDMI port of the Brix, I do not have a miniDP to HDMI cable... and I also tried all input ports on the TV.

I think the DP1 is the miniDP and DP2 the HDMI... I am still very confused 🤔

Hi, I just found an article with some info about "randr" and tried to call it with some parameters:

xrandr

xrandr --output DP2 --mode 3840x2160 --rate 60.00

This call brings back the picture on the TV in the defined resolution... but the call only works after calling "xrandr" without parameters?!?! I am totally confused??? Any idea what to do next and fix my system?

Thanks and best regards

highball

Hi everybody...

first of all I want to thank all of you contributing and devoloping Libreelec

I actually have a very queer issue with my Gigabyte Brix BRi3-8130 with an Intel i3-8130U CPU, 8GB RAM and 250 M2 PCIE SSD. With my old Full HD TV (Panasonic Plasma) it worked everything out of the box using the actual BETA version (LibreELEC-Generic.x86_64-9.1.501.img.gz)... but now I got a brand new UHD 4K Samsung Q85 QLED TV and I can only see the Gigabyte Bootlogo and then the TV says "No Signal/Source"... I already tried to install with an USB stick, but the same, I can see the Boot Logo and then the boot prompt and instead of any output it looks like nothing is connected anymore...

But Libreelec seems to be running, because I can access the machine with ssh, here you can see the boot up log: 2019-09-22 19:06:34.399 T:140199041910912 NOTICE: ----------------------------- - Pastebin.com

After some research I found some tips to get more info about the issues and found "xrandr" which shows the following info after boot:

~ # xrandr
Screen 0: minimum 8 x 8, current 1024 x 768, maximum 32767 x 32767
DP1 disconnected primary (normal left inverted right x axis y axis)
DP2 connected (normal left inverted right x axis y axis)
   3840x2160     60.00 +  50.00    59.94    30.00    25.00    24.00    29.97    23.98
   4096x2160     60.00    50.00    59.94    30.00    24.00    29.97    23.98
   2560x1440    120.00    59.95
   1920x1080    120.00   100.00   119.88    60.00    60.00    50.00    59.94    30.00    25.00    24.00    29.97    23.98
   1920x1080i    60.00    50.00    59.94
   1680x1050     59.88
   1600x900      60.00
   1280x1024     75.02    60.02
   1440x900      59.90
   1280x800      59.91
   1152x864      75.00
   1280x720      60.00    50.00    59.94
   1024x768      75.03    70.07    60.00
   832x624       74.55
   800x600       72.19    75.00    60.32
   720x576       50.00
   720x480       60.00    59.94
   640x480       75.00    72.81    66.67    60.00    59.94
   720x400       70.08
HDMI1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)

The connected TV still shows no source... and I have tried different HDMI 2.0 cables, including a premium certified cable... all with the same result.

From my point of view the system switches the display of during boot, regardless if installing or using the installed LibreELEC... this issue should be no problem with the TV, because I also tried a BluRay Player with the same HDMI Port and cable which does not have any issues displaying 4k UHD HDR movies...

Does anyone has an idea how to resolve this issue and get a working LibreELEC in UHD 4K with 3840 x 2160 @ 60Hz...

Thanks and best regards

highball