Posts by Bokai

    You can set xrandr commands in the autostart.sh file, as a last resort.

    Hi, yes this is what I did, per my first post. The problem is that my HTPC is always on, so the autostart script is only run after a reboot.

    I will work on getting a debug log when I'm at home again.
    [hr]
    I figured out I could access my LAN via my home VPN so I managed to pull the debug log while my GF tried playing a few sources. After pausing the movie, changing tv input and back to Librelec again the same thing happened as described in post #4

    This is the log: [Logtalk] ################################################################################ - Pastebin.com

    Thanks for helping me! :)

    No one?

    Some more info:

    - Video settings for the GUI change from my normal 60Hz if I pause a video playing in 23.98, shut down my TV and then turn it on again. If I now stop the video my GUI framerate has changed to 23.98.
    - Sometimes when I start up Libreelec when and go in to Video settings it immediately asks me "Do you want to keep the current settings" without me even knowing what settings it is referring to.

    Is this some kind of HDMI handshake issue?

    Do I need to manually set xrandr everytime I switch to Libreelec from any other TV inputs?

    Hi, I'm back again since my solution didn't do the trick more than a day.

    I don't know what is happening, but it seems as if Libreelec keep changing video settings after I play certain videos or after turning off/on my display(Libreelec is always on). Sometimes framerate is changed to 24p(for GUI) and sometimes I need to toggle Full/Limited color off/on to not get crushed blacks.

    How can I troubleshoot this?

    Hi,

    I'm having trouble getting my video settings to save completely on my installation of Libreelec 8.0.1 on a Intel Nuc D54250WYK(Intel HD Graphics 5000).

    Everytime I reboot the computer, the output changes from 1080p@60hz(settings in System->Display) to native 4k@24hz. It also changes my settings in xrandr to full range, despite me changing it to "Limited 16:235" before. The effect is that my white and black levels are completely crushed. :(

    Every other setting in Libreelec is saved properly and does not change after reboot.

    How can I make my video settings stick?

    /Bokai
    [hr]
    [hr]


    EDIT: I managed to solve it by creating an autostart.sh script that alters the video config after every reboot. I still don't get why these settings can't be changed in the Libreelec interface to begin with.

    For other people having the same problem, this was my solution:

    edit /storage/.config/autostart.sh

    with the following:

    Code
    (
    sleep 10
    xrandr --output HDMI1 --set "Broadcast RGB" "Limited 16:235" --mode 1920x1080 --rate 60.00
    )&


    Sleep was necessary or otherwise the script would execute before video was initialized and my settings would be overwritten by Libreelec.

    Then change permissions of the script:

    Code
    chmod +x autostart.sh