You can have a look at LE config --> Network --> Enable 'tethered' WAP. Depending on your wifi adaptor - it may or may not work.
Posts by Iridium
-
-
Ok - then I'm running out of ideas. Have you set the language correctly in LE config and Kodi and does the keyboard work correctly in ssh?
-
URL is 404
The max HDMI distance is generally agreed as around 50 feet so trying to doubling it, even with an extender is pushing it to the limits. Find another solution.
-
-
MOD: Set to resolved
-
I can offer loads of ways to try and debug this issue - but at the end of the day - Kodi is not designed to do what you want. Use a "proper" file transfer program like SFTP or even SMB if you are desperate.
-
It all depends on what H/W you are running. Many LE releases support "most" DVB sticks, some don't. As you haven't mentioned what hardware nor your release of LE it's difficult to help any more.
-
It certainly sounds like a hardware issue with either your BT transmitter or headphones. LE has no way of knowing which way your head is pointing.
-
Leia is still alpha - issues are being ironed out daily. So if you want a stable build, stick to 8.2.5
-
With my experience of using a Pi-Fi DAC I have not had any problems. However, I don't know what the difference is to the PIFI DAC +
-
As they have different H/W arm7f vs aarm64 you might have issues.
How did you get the RPi3 running. Was it a fresh install and then a restore? or did you just swap the SD cards?
-
In my experience of a Seagate 4TB HDD you will need a powered hub for it to operate. It all depends on how good the voltage output is on the K11 pro.
-
Leia is still alpha - so things might change as bugs are ironed out
-
-
MOD: Changed title to [How To]
-
I've a feeling the HUB may be the issue. Can you unplug your HUB and connect the USB receiver directly to the K12 2nd USB port. Does this improve things?
-
As my crystal ball is currently being serviced - I have no idea what hardware you are talking about.
Some LE releases have the complete media_build already installed, which should include your driver. Other than that you'll need to recompile the kernel yourself.
-
You need to pair the Harmony to the USB BT dongle via the Harmony App. Once it's paired it should show up in the LE settings as "Harmony Keyboard" where you can connect.