Posts by fryelectro

fryelectro · [SOLVED] How to force update? fryelectro September 28, 2019 at 6:56 PM

just to say thanks as I was looking for a long time already to get this fixed over many libreelec versions, but the above did the trick! Thanks!

fryelectro · Retrospect addon fryelectro April 4, 2017 at 7:46 AM

Hi, I have the same issue here. LibreELEC 8.0.1 with retrospect add-on does not work for vrt.nu streams. According the following info the issues is caused by the adoption of LibreSSL instead of OpenSSL (basrieter / XBMC Online TV / issues / #818 - VRT NU not working on Raspberry Pi2 and Amlogic s905 device under Krypton — Bitbucket). Though I also found following link: move back to openssl by lrusak · Pull Request #1312 · LibreELEC/LibreELEC.tv · GitHub which I hope will become merged soon: LibreELEC moving back to OpenSSL.

In the meanwhile is there no other workaround than recompiling LibreELEC with OpenSSL?

fryelectro · Intel NUC (Kaby-Lake) and HDMI-CEC fryelectro March 30, 2017 at 12:34 PM

It's certainly not the NUC hardware as I tried it also with an external USB adapter from Pulse Eight which injects the CEC signal into the HDMI cable between the PC and the TV/AV Receiver. I got the same issue as with the internal Nuc adapter. That rules out some things I guess...

fryelectro · Intel NUC (Kaby-Lake) and HDMI-CEC fryelectro March 29, 2017 at 7:18 AM

BTW another remark: I replaced my previous KODI setup (just a mini PC running libreelec 7 with the external Pulse Eight USB adapter installed) with this new NUC setup. In the previous situation I've never encountered issues with the CEC functionality. Even the HDMI cables stayed the same

fryelectro · Intel NUC (Kaby-Lake) and HDMI-CEC fryelectro March 28, 2017 at 11:18 PM

Quote from h0schi

Nice 2 hear that

I do not think thats my nuc or my adapter is faulty.
It works flawless with win 10.

The CEC-function stop working after initializing LibCEC - before i can use my TV-remote about 3 or 4 seconds.
LibCEC shows me that my soundbar is connected and after this message, my TV-remote stop working.

I encounter exactly the same issue with a NUC6CAYH Apollo Lake NUC. I've also removed the internal Pulse Eight adapter and installed the external Pulse Eight USB adapter => same issue!

Which gives me the idea that it has to do something with Libreelec + the newer NUC hardware since you confirmed you have no problem when using Kodi on Win10. I didn't try this yet myself.

Maybe we can test ubuntu + Kodi or Openelec to see if this setup has the same behavior?