Posts by Premjack

Quote from balbes150

Image LE model S812 S802. Make on the basis of two GIT drieschel and kszaq , with some additions and changes. To use you must activate universal multiboot (after burning the image to SD card use toothpick method on a TV console). After a one-time activation universal multi-boot with TV box, you can use the images recorded on USB media. To use the TV box still images OE LE (with old multi-boot option), it is enough to copy to the FAT partition of those drives, file script s805_autoscript .

Yandex.Disk

The branch with the source code for the Assembly.
GitHub - 150balbes/LibreELEC.tv: 'Just enough OS' for Kodi

Scripts for LE.
Amlogic_s905/script/S805/LIBREELEC at master · 150balbes/Amlogic_s905 · GitHub

Add image Jarvis
Add image Krypton

balbes150 I started from scratch did a factory reset then put files on SD card then removed aml_autoscript to prevent boot loop as instructed then tried both SD card and USB flash drive attached is the error message my device is T8 AML V3 S812 any ideas?

Quote from balbes150

Image LE model S812 S802. Make on the basis of two GIT drieschel and kszaq , with some additions and changes. To use you must activate universal multiboot (after burning the image to SD card use toothpick method on a TV console). After a one-time activation universal multi-boot with TV box, you can use the images recorded on USB media. To use the TV box still images OE LE (with old multi-boot option), it is enough to copy to the FAT partition of those drives, file script s805_autoscript .

Yandex.Disk

The branch with the source code for the Assembly.
GitHub - 150balbes/LibreELEC.tv: 'Just enough OS' for Kodi

Scripts for LE.
Amlogic_s905/script/S805/LIBREELEC at master · 150balbes/Amlogic_s905 · GitHub

Add image Jarvis
Add image Krypton

balbes150 i've enabled multiboot formatted USB flash drive device still boots into android.Device T8 AML V3 S812 attached is the firmware for the device and and error image
Latest T8-AML-V3 Firmware Download T8 Plus Firmware
i thank you for your time and effort making these images i hope i can get this to run on the T8 V3.

Demetris will this new image work on S812 your RC 4 image works fine on my S802 T8 but having difficulty with balbess150 image for S812.

Sent from my SM-G900F using Tapatalk

Quote from balbes150

Image LE model S812 S802. Make on the basis of two GIT drieschel and kszaq , with some additions and changes. To use you must activate universal multiboot (after burning the image to SD card use toothpick method on a TV console). After a one-time activation universal multi-boot with TV box, you can use the images recorded on USB media. To use the TV box still images OE LE (with old multi-boot option), it is enough to copy to the FAT partition of those drives, file script s805_autoscript .

Yandex.Disk

The branch with the source code for the Assembly.
GitHub - 150balbes/LibreELEC.tv: 'Just enough OS' for Kodi

Scripts for LE.
Amlogic_s905/script/S805/LIBREELEC at master · 150balbes/Amlogic_s905 · GitHub

Add image Jarvis
Add image Krypton

@blabes150 thank you for responding i kept the aml_autoscript in this time(i get you now keep in the file and if goes to boot loop after inital first time use remove) and recieced this error report device T8 AML V2 S812 best regards sir you and all the devs total respect, picture of error report attached.

Quote from balbes150

Image LE model S812 S802. Make on the basis of two GIT drieschel and kszaq , with some additions and changes. To use you must activate universal multiboot (after burning the image to SD card use toothpick method on a TV console). After a one-time activation universal multi-boot with TV box, you can use the images recorded on USB media. To use the TV box still images OE LE (with old multi-boot option), it is enough to copy to the FAT partition of those drives, file script s805_autoscript .

Yandex.Disk

The branch with the source code for the Assembly.
GitHub - 150balbes/LibreELEC.tv: 'Just enough OS' for Kodi

Scripts for LE.
Amlogic_s905/script/S805/LIBREELEC at master · 150balbes/Amlogic_s905 · GitHub

Add image Jarvis
Add image Krypton

balbes150 I download the latest Krypton image and tar file then used SDFormatter V4.0 to format SD card extracted zip using winrar then burned image onto SD card using Win32Diskimager then removed aml_autoscript as instructed put toothpick in reset device tried releasing when logo S812 appears and holding longer untill it goes into android recovery then install from zip file and then the error comes up.Am i doing anything incorrectly?I used the same technique using Artemis image on T8 AML V2 S802 and that works well.This device is a T8 AML V3 S812 attached again is the error pic.

I get you sir now I think kodi 17 has even disabled rtmp as well I'll see if I can find the post later.

Sent from my SM-G900F using Tapatalk

itsmeedoofer Kodi 17 Krypton already runs on lollipop and above.

Sent from my SM-G900F using Tapatalk

Quote from balbes150

Image LE model S812 S802. Make on the basis of two GIT drieschel and kszaq , with some additions and changes. To use you must activate universal multiboot (after burning the image to SD card use toothpick method on a TV console). After a one-time activation universal multi-boot with TV box, you can use the images recorded on USB media. To use the TV box still images OE LE (with old multi-boot option), it is enough to copy to the FAT partition of those drives, file script s805_autoscript .

Yandex.Disk

The branch with the source code for the Assembly.
GitHub - 150balbes/LibreELEC.tv: 'Just enough OS' for Kodi

Scripts for LE.
Amlogic_s905/script/S805/LIBREELEC at master · 150balbes/Amlogic_s905 · GitHub

Add image Jarvis
Add image Krypton

Used latest image in T8 AML V2 S812 re,oved aml script as instructed and used used toothpick method and encountered this any ideas?

Quote from Demetris

So i happened to see drieschel work stalled,
So i decided to open a new one with my builds, i like to go stable so dont ask rolling builds
and i only have an S802 [Beelink S82, Orbsmart S82, Tronsmart S89(-H), MXIII(2G)]
So my builds for other boards are always been builded and released untested!
Download Links:
Krypton:8.xx
LE-8.0 + LE-8.0.1
Download Links:
downloads for Amlogic MXQ TV Box by Demetris. | AndroidFileHost.com | Download GApps, PA GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers

- Kernel updated to latest 3.10.105 LTS
- LE upstream updates
- 5.1 Surround output to Front, Center, Rear and Subwoofer speakers
- 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
- Support for 48000Hz vs 44100Hz rates as previously yay!!
I hope there's someone able to test it as i don't have any capable equipment around here
Enjoy!

Jarvis:7.xx
login | AndroidFileHost.com | Download GApps, PA GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers
Enjoy!
[hr]
You can always find changelog in this link:
thread-2158.html
LE8-Source
LE7-Source

Display More

Demetris i don't know what code changes you made between RC 4 and final release but your Krypton RC 4 is working on my T8 AML V2 S802 now usb remote which is an S77 pro working playback fine no issues, just wondered was there a huge difference?

Demetris yes it was definitely T8 img file burned onto SD card used toothpick method freezes at boot screen then that eror report which I previously posted.

Sent from my SM-G900F using Tapatalk

Demetris I tried to upload picture images obviously unsuccessfully I'll try again.

Sent from my SM-G900F using Tapatalk
[hr]
Demetris picture file size too large i tried the top image and says along these lines i'm not new to kodi but i'm new to this so bare with me

error in prepare_sysroot: mount_common: Could not mount /dev/system ***
starting debugging shell... type exit to quit ###
can't access tty; job control turned off

Has anyone got any of these images to boot on a T8 V2 S802?

Sent from my SM-G900F using Tapatalk
[hr]
Anyone help with this or is is just not going to happen.Device T8 S02 2GB.

Quote from Demetris

So i happened to see drieschel work stalled,
So i decided to open a new one with my builds, i like to go stable so dont ask rolling builds
and i only have an S802 [Beelink S82, Orbsmart S82, Tronsmart S89(-H), MXIII(2G)]
So my builds for other boards are always been builded and released untested!
Download Links:
Krypton:8.xx
LE-8.0 + LE-8.0.1
Download Links:
downloads for Amlogic MXQ TV Box by Demetris. | AndroidFileHost.com | Download GApps, PA GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers

- Kernel updated to latest 3.10.105 LTS
- LE upstream updates
- 5.1 Surround output to Front, Center, Rear and Subwoofer speakers
- 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
- Support for 48000Hz vs 44100Hz rates as previously yay!!
I hope there's someone able to test it as i don't have any capable equipment around here
Enjoy!

Jarvis:7.xx
login | AndroidFileHost.com | Download GApps, PA GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers
Enjoy!
[hr]
You can always find changelog in this link:
thread-2158.html
LE8-Source
LE7-Source

Display More

It says access denied for Jarvis image.