Hi Folks,
I installed an internal CEC-Adapter into my NUC yesterday. That worked very well, but now my analog Sound does not seem to initialize correctly anymore. HDMI works (but is not an option at the moment), while Analog stays quiet. No output at all.
I checked the cable (plugged something else in) and sound comes normal.
At some point, after watching for about 30 minutes on HDMI output, the sounds suddenly came on the Analog after switching (so i know that it physically works). But a reboot brings back the problem of no sounds.
here is the (i think relevant) debug output when the Analog get initlizalized (or switched to)
21:38:34.479 T:140024815089408 DEBUG: CActiveAESink::OpenSink - trying to open device ALSA:@
21:38:34.479 T:140024815089408 INFO: CAESinkALSA::Initialize - Attempting to open device "@"
21:38:34.485 T:140024815089408 INFO: CAESinkALSA::Initialize - Opened device "sysdefault"
21:38:34.485 T:140024815089408 DEBUG: CAESinkALSA::SelectALSAChannelMap - Selected ALSA map "FL FR"
21:38:34.485 T:140024815089408 INFO: CAESinkALSA::InitializeHW - Your hardware does not support AE_FMT_FLOAT, trying other formats
21:38:34.485 T:140024815089408 INFO: CAESinkALSA::InitializeHW - Using data format AE_FMT_S32NE
21:38:34.485 T:140024815089408 DEBUG: CAESinkALSA::InitializeHW - Request: periodSize 1024, bufferSize 9600
21:38:34.486 T:140024815089408 DEBUG: CAESinkALSA::InitializeHW - Got: periodSize 1024, bufferSize 9216
21:38:34.486 T:140024815089408 DEBUG: CAESinkALSA::InitializeHW - Setting timeout to 192 ms
21:38:34.486 T:140024815089408 DEBUG: CAESinkALSA::GetChannelLayout - Input Channel Count: 2 Output Channel Count: 2
21:38:34.486 T:140024815089408 DEBUG: CAESinkALSA::GetChannelLayout - Requested Layout: FL,FR
21:38:34.486 T:140024815089408 DEBUG: CAESinkALSA::GetChannelLayout - Got Layout: FL,FR (ALSA: FL FR)
21:38:34.486 T:140024815089408 DEBUG: CActiveAESink::OpenSink - ALSA Initialized:
21:38:34.486 T:140024815089408 DEBUG: Output Device : Default (HDA Intel PCH ALC283 Analog)
21:38:34.486 T:140024815089408 DEBUG: Sample Rate : 48000
21:38:34.486 T:140024815089408 DEBUG: Sample Format : AE_FMT_S32NE
21:38:34.486 T:140024815089408 DEBUG: Channel Count : 2
21:38:34.486 T:140024815089408 DEBUG: Channel Layout: FL,FR
21:38:34.486 T:140024815089408 DEBUG: Frames : 1024
21:38:34.486 T:140024815089408 DEBUG: Frame Size : 8
21:38:34.489 T:140024823482112 DEBUG: CActiveAE::ClearDiscardedBuffers - buffer pool deleted
21:38:34.490 T:140023022208768 DEBUG: CVideoPlayer::HandleMessages - player started 1
21:38:34.490 T:140023022208768 DEBUG: CVideoPlayer::SetCaching - caching state 3
21:38:34.490 T:140023022208768 DEBUG: CDVDClock::SetSpeedAdjust - adjusted:0.000000
21:38:34.490 T:140023022208768 DEBUG: CVideoPlayer::SetCaching - caching state 0
21:38:34.490 T:140023022208768 DEBUG: CDVDClock::SetSpeedAdjust - adjusted:0.000000if anyone has an idea on how to debug, or better, fix this problem, let me know
Update:
If i boot the NUC, i have no sound on analog. If I then put it standby and immediately start it again, i have sound on Analog.
The full debug log is attached.
Thanks in advance
