No audio on a mini PC

    • New

    Installed the top image. The pastekodi output is:


    http://ix.io/4GVk


    Still no audio through dp to hdmi 🙃

    Thank you

    Based on the first github link you linked in the previous reply, that's what I tried adding in, but couldn't modify the files in modprobe.d.

    Edited once, last by boostedvtak: Merged a post created by boostedvtak into this post. ().

    • New

    Funny enough, I was just looking at the BIOS version of the mini PC. I was one version behind.

    Updated to the latest version now.

    Did a fresh install of LE for good measure too. Here's the pastekodi output now:


    http://ix.io/4GVI

    • New
    Code
    2023-09-20 20:41:28.740 T:1174    error <general>: [display-info] Error parsing EDID:
2023-09-20 20:41:28.740 T:1174    error <general>: [display-info] ----------------------------------------------
2023-09-20 20:41:28.740 T:1174    error <general>: [display-info] Block 1, CTA-861 Extension Block:
2023-09-20 20:41:28.740 T:1174    error <general>: [display-info]   Colorimetry Data Block: Reserved bits MD0-MD3 must be 0.
2023-09-20 20:41:28.740 T:1174    error <general>: [display-info] 
2023-09-20 20:41:28.740 T:1174    error <general>: [display-info] ----------------------------------------------
    Quote

    I've tried the EDID config

    So you've created your own EDID file like this, right?

    • New

    To be honest, I completely forgot to re-do it once I flashed the custom image on.

    Just re-created it again, yes using the link you just sent over. Following the guide for Intel.


    Just added that in, and rebooted. The new pastekodi is:

    http://ix.io/4GVU


    That area as far as I can tell looks the same still...

    • New

    Thanks!


    chewitt Maybe an Embedded DisplayPort (eDP) issue?

    Code
    Sep 20 21:09:33.003779 LibreELEC kernel: i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP