Legacy v9.2 builds for Amlogic S805, S8X2, S905x and WP1 devices

  • I want to try it on an mxq pro 4k with 1g of ram, which means I have never used that image before.

    Thus, is the right image the one with "k_series" in its name (from the releases page in github)?

  • I want to try it on an mxq pro 4k with 1g of ram, which means I have never used that image before.

    Thus, is the right image the one with "k_series" in its name (from the releases page in github)?

    I only upload images to GitHub that made for those devices which I have. I define all of them precisely in the first post linked above.

    The other images are in the 3rdParty category, which are only available from my own server. The links are also in the first post.


    In short, you need exactly the Generic_S905 image. Regarding dtb, I'm just guessing:

    gxbb_p200_1G_100M.dtb or gxbb_p200_1G_100M_RealtekWiFi.dtb.

  • Do you really own so many devices? :O

    I just got the s905 image from the 3rdparty folder. My dtb is

    Code
    # cat /proc/device-tree/amlogic-dt-id
    gxb_p200_1g

    so I assume that the first one is the correct dtb.

  • Do you really own so many devices? :O

    • 4 pcs of WeTek: 1 x Play, 1 x Play 2, 2 x Core,
    • 4 pcs of Mecool/Videostrong: 2 x KI Pro (GXL), 1 x KI Plus (GXBB), 1 x KII Pro (GXBB),
    • 2 pcs of OTT M8S+: 1 x w/AP6330, 1 x w/BCM4335B0,
    • 2 pcs of MXQ (1 x HD18Q and 1 x m201d).
    • 1 pc of Odroid C1+.

    *Although my Play 2 is half-dead and my KI Plus is unfortunately completely dead at the moment. ;(

    I assume that the first one is the correct dtb.

    If the wifi doesn't work, you need the second one. It differs only in that.