Haupage WinTv Nova HD USB2 not recognize in Tvheadend

umrotzer · May 17, 2021 at 2:31 PM

is this an image like the last time? I will test it and let u know.

**CvH** · May 18, 2021 at 11:18 AM Official Post

yea I just added the patch, if this works I PR it so it hopefully appears at final version

umrotzer · May 20, 2021 at 1:23 AM

OK so tested it today on both tvheadend server versions (4.2 and 4.3 Alpha) non of them recognized the Haupage. So not good for final version 😅.

But much appreciated your work as always my friend

**CvH** · May 20, 2021 at 11:27 AM Official Post

can you share a output of dmesg | paste ?

umrotzer · May 20, 2021 at 7:49 PM

ya sure, that's what I forgot yesterday to post.

http://ix.io/3np8

**CvH** · May 21, 2021 at 11:31 AM Official Post

device is detected

not sure whats missing, nothing obvious from the log

likely you need some stuff from Kernel 5.11 (we are at 5.10)

umrotzer · May 21, 2021 at 2:28 PM

The image u created for the raspi 3 the first time was straight forward. Booted up with it and all was good. So maybe it is a problem with the alpha of tvheadend 4.3?

Because basically 4.2 should not work probably on le10 right? After its not updated to run on kodi 19 Base?

**CvH** · May 21, 2021 at 9:01 PM Official Post

Quote from umrotzer

problem with the alpha of tvheadend 4.3?

nope, the drivers are not listed so basically the drivers are not up

as long no drivers are working Tvh cant do anything

umrotzer · May 21, 2021 at 9:55 PM

So the driver that runs for the raspi 3 is not updated atm for the raspi 4 and if so, is someone working on that?

**CvH** · May 22, 2021 at 3:46 PM Official Post

We use a different (much older) Kernel for LE9.2, there a all-in-one patch made it work (parts of it are already merged at 5.10).

Now we are at 5.10, at 5.11 the drivers where official added - but its not enough that I added the patch from this thread, there is something else needed I have no idea about.

I could spin up another build, easy peasy but currently no idea what to add.

umrotzer · May 23, 2021 at 4:19 PM

Ye ok, thx for all the work. Then I wait to upgrade to a pi 4 and use it for octoprint until it's ready

umrotzer · September 30, 2021 at 12:18 AM

just to give an update.

I installed the latest 10.0 built and the tuner still gets not recognized

**CvH** · September 30, 2021 at 11:55 AM Official Post

did you tried a nightly build if this works ?

umrotzer · September 30, 2021 at 4:36 PM

did the nightly has new drivers then the first official 10.0 release?

And which nightly u mean? Tvh nightly or libreelec nightly?

**CvH** · October 1, 2021 at 10:11 AM Official Post

Quote from umrotzer

did the nightly has new drivers then the first official 10.0 release?

yea they include more recent drivers (the drivers are at the linux kernel)

but be aware that it also updates to Kodi 20 that is pre alpha (you cant downgrade to LE10/K19 easily)
so better do a backup before upgrade

If this works I can make you a LE10 version with the new drivers.

umrotzer · October 1, 2021 at 11:07 PM

so tested on the latest nightly

LibreELEC-RPi4.arm-11.0-nightly-20211001-5def4c6.img.gz

but no luck. also tested both 4.2 and 4.3 (alpha).

**CvH** · October 2, 2021 at 8:47 AM

can you share a dmesg | paste output ?

looks like something is missing, in theory it should work

umrotzer · October 21, 2021 at 1:06 PM

Quote from CvH

can you share a dmesg | paste output ?
looks like something is missing, in theory it should work

So finally here is the log

http://ix.io/3CoF