I'm looking at the LibreElec already built in remote support is it Eventlircd ?
what's the quickest way to change the repeat delay and repeat period
272 root 0:00 /usr/sbin/eventlircd -f --evmap=/etc/eventlircd.d --socket=/run/lirc/lircd --release=_UP
is this using eventlircd ?
bcos:
LibreELEC:~ # ir-keytable
Found /sys/class/rc/rc0/ (/dev/input/event3) with:
Driver mceusb, table rc-rc6-mce
Supported protocols: unknown other lirc rc-5 jvc sony nec sanyo mce-kbd rc-6 sharp xmp
Enabled protocols: lirc nec rc-6
Name: Media Center Ed. eHome Infrared
bus: 3, vendor/product: 0471:0815, version: 0x0000
Repeat delay = 1000 ms, repeat period = 125 ms
1000ms and 125ms is a bit slow for button pressing
I can sort of successfully kill lircd etc and set up keymaps through ir-keytable but sorta don't get the full harmony remote support
I want to just want to change these couple things with the original way it is using eventlircd
