MSI A78M-E35 wake up on LAN/USB possible?

Hi,

I upgraded my existing htpc and am wondering, if I can get wake up on LAN (via connected WIFI-router via cable) or USB (logitech K400+ wireless keyboard) to work?

My mainboard is a MSI A78M-E35 and if my lookup is correct with a realtek RTL8111G network-chip.

Of course I disabled eup2013 power-saving and enabled all the wake-up-options in bios, however nothing of that worked

Maybe worth to note: stand-by via power-menu doesn't work but I don't care as i either torn it on or off.

I found some solution via a small connected board which connects to the power-switch but I'd really prefer a software-solution

I'm trying to use the yatse app (by pressing the in-app power-button, it says "WOL sent".

If that's not working, I'd be OK by using an USB-keyboard

So it's activated at least for the yatse app if I'm right?

LibreELEC:~ # ethtool eth0
Settings for eth0:
  Supported ports: [ TP AUI BNC MII FIBRE ]
  Supported link modes:   10baseT/Half 10baseT/Full 
                          100baseT/Half 100baseT/Full 
                          1000baseT/Full 
  Supported pause frame use: Symmetric Receive-only
  Supports auto-negotiation: Yes
  Supported FEC modes: Not reported
  Advertised link modes:  10baseT/Half 10baseT/Full 
                          100baseT/Half 100baseT/Full 
                          1000baseT/Full 
  Advertised pause frame use: Symmetric Receive-only
  Advertised auto-negotiation: Yes
  Advertised FEC modes: Not reported
  Link partner advertised link modes:  10baseT/Half 10baseT/Full 
                                       100baseT/Half 100baseT/Full 
                                       1000baseT/Full 
  Link partner advertised pause frame use: Symmetric
  Link partner advertised auto-negotiation: Yes
  Link partner advertised FEC modes: Not reported
  Speed: 1000Mb/s
  Duplex: Full
  Port: MII
  PHYAD: 0
  Transceiver: internal
  Auto-negotiation: on
  Supports Wake-on: pumbg
  Wake-on: g
  Current message level: 0x00000033 (51)
             drv probe ifdown ifup
  Link detected: yesLibreELEC:~ # ethtool eth0

Settings for eth0:
Supported ports: [ TP AUI BNC MII FIBRE ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: Symmetric Receive-only
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Link partner advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Link partner advertised pause frame use: Symmetric
Link partner advertised auto-negotiation: Yes
Link partner advertised FEC modes: Not reported
Speed: 1000Mb/s
Duplex: Full
Port: MII
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pumbg
Wake-on: g
Current message level: 0x00000033 (51)
drv probe ifdown ifup
Link detected: yes