terratec cinergy s2 dual - ir receiver is registered twice

Hi,

I have updated to 9.0.0. Afterwards I have selected the DVB drivers for TBS to activate my dual tuner.

This works good so far. The problem is now that the IR receiver which is connected internally to both tuner is now registered twice.

So each keystroke on my ir command is not being send twice to the system.

We have already successfully addressed this problem in the 7.0.1 custom dab-drivers build by crazy cat. There a little change has been applied to the driver to ignore the second upcoming IR receiver.

CvH can you please take a look if it is possible to eliminate this "double feature"

Thanks in advance

Found a workaround by adding a udev rule to /storage/.config/udev.rules.d/97-eventlircd.rules

ATTRS{iID_VENDOR_ID}=="153b", ATTRS{ID_MODEL_ID}=="1182", ENV{eventlircd_enable}="true", RUN+="/bin/rm /dev/input/event6", ENV{eventlircd_evmap}="tevii_s660.evmap"

which deletes the second /dev/input/event6 node.

Works only when there are no changes to the setup.