@balbes150 LE images with Kodi-19 for S9xxx

  • Quote from balbes150

    Can you show UART log ?

    GXBB:BL1:08dafd:0a8993;FEAT:EDFC318C;POC:3;RCY:0;EMMC:800;NAND:81;SD:0;READ:0;CHK:F3;USB:8;LOOP:1;EMMC:800;NAND:81;SD:0;READ:0;CHK:F3;USB:8;LOOP:2;EMMC:800;NAND:81;SD:0;READ:0;CHK:F3;USB:8;LOOP:3;EMMC:8;

    Quote from balbes150


    I temporarily stopped building aarch64. What exact version of the image was used ?

    I did a git pull today on your amlogic-master branch. Compiling (ARCH=arm) leads to the same result as above.

  • Hello friend, I have a doubt that I recently installed these programs recently purchased an Amlogic S905X2 Android 9.0 T95Q 4GB RAM 64GB ROM Quad core

    What programs are for this model?

    thank you

  • tks for the info... but my android does not have menu update.. can you share android or linux command, so i can update aml_autoscript.zip manualy?

    • Official Post

    In Kodi of the Android, the system informations display 4 Gb

    LE correctly shows the real memory size. In Android firmware manufacturers often specifically deceive users, overestimate the real memory size.

    I did a git pull today on your amlogic-master branch. Compiling (ARCH=arm) leads to the same result as above.

    Show the UART log from the launch of my latest build 20190724. Self-Assembly from GIT can be different.


    What programs are for this model?

    img.gz

  • A95x f2 issues:

    1. When installed to emmc goes to bootloop after the first reboot.

    2. Cpu cores 0 and 1 constantly loaded from 40 to 90%.

    Dtb used is x96rmii. Only this one allows ethernet to work along with the internal memory to be seen

    Edited once, last by Patkino (July 30, 2019 at 8:35 AM).

  • Hello,
    I've booted the latest image on my A95X F2 (s905x2) with 4Gb of RAM / 64 Gb of emmc.The first issue is the amount of RAM: only 3Gb are available.

    Worst, Kodi crashed when I try to play a x265 video with hardware acceleration activated. I've tried all g12a dtb with no success.

    Could you please tell if it is possible to change the hardware acceleration driver?

    Thanks

    Which video sample are you using? I'd like to try it....

  • tks for the info... but my android does not have menu update.. can you share android or linux command, so i can update aml_autoscript.zip manualy?

    Maybe try installing Terminal Emulator under android. Then rinsert SD card, run the TE app and type "reboot update" and enter. That may work.

  • Quote from balbes150

    Show the UART log from the launch of my latest build 20190724. Self-Assembly from GIT can be different.

    GXBB:BL1:08dafd:0a8993;FEAT:EDFC318C;POC:3;RCY:0;EMMC:800;NAND:81;SD:0;READ:0;CHK:F3;USB:8;LOOP:1;EMMC:800;NAND:81;SD:0;READ:0;CHK:F3;USB:8;LOOP:2;EMMC:800;NA

  • I tried this version LE on Mecool KM8 S905X 2G/16GB, new version with wifi/bt chip AP6236

    wifi/bt no working, dtb or missing driver issue?

    AP6236

    BCM43436B0

    Remote also does not work