[8.90.1] CoreELEC for S905/S912 devices

Quote from 2re

System->Add-ons->My add-ons->services

Double checked here, it was the first place i checked, and no ... nothing for DVB drivers, or crazycat ..

Quote from wrxtasy

Some people need to spend a bit more time reading the explanations at the bottom of the Kodi Settings screens:

Sync Playback to Display:

Synchronise video and audio to the refresh rate of the monitor. VideoPlayer won't use passthrough audio in this case because resampling may be required.

For example:

If you do not have a TV with 24p refresh switching capabilities you can...

Set a Kodi GUI refresh rate of 50Hz.

24p streaming video will be sped up to 25 frames per second and output at 50Hz.

All Audio is resampled to resynced to 25fps to match the sped up video.

You might also hear an audio pitch change.

Display More

"VideoPlayer won't use passthrough audio in this case"

maybe this is a little bit outdated?

it works with "libreelec for x86/x64" and "libreelec 8.2.3.1" without any problem.

audio is decoded. then all channels are speeded up from 24p to 25p (sync playback to display and threshold for pitch correction 100) and then it is "encoded" back to ac3 (enable dolby digital ac3 transcoding) .

sad that i have problems with dvbviewer client on 8.2.3.1. otherwise this would be a perfect solution for me.

Quote from Davew

Double checked here, it was the first place i checked, and no ... nothing for DVB drivers, or crazycat ..

Just tested a clean install, and the drivers are there.

Quote from joemoer

Yes, I have exactly the same problem. 8.90.0 worked perfectly. Did an update to 8.90.1 and "back" button stopped working. This is on an Odroid C2.

I have a similar problem with ir-remote on my X96 - after update to 8.90.1 numeric keys do not work. I went back to 8.90.0, where everything works perfectly.

orlov , use KEY_0, KEY_1... for numeric keys and KEY_ESC as back button

boot2k3 Thank You very much, it already works.

Hi,

First of all, many thanks for your effort, really appreciate your great work.

Yesterday succesfully upgrade LibreElec 8.9.6 to CoreElec 8.90.1 on Minix neo u9-h sd storage.

Only problem now is HEVC files are not playing well, see attachment

When I remove echo 1 > /sys/module/amvdec_h265/parameters/double_write_mode from autostart.sh HEVC files plays well.

Added the line echo 1 > /sys/module/amvdec_h265/parameters/double_write_mode for the Hyperion plugin.

When removed HEVC plays fine but Hyperion shows solid white/purple leds.

Any sollution for this?

Quote from atreyu

I suspected as much, seems to be mce remote related. I switched back to 8.90.0 because of this, but still have a test system running the latest. I'll have another go at it later, but i dont expect to be able to solve this at user level.

Cheers, Atreyu

I've switched back to 8.90.0 as well, but I can for the life of me to get tv headend PVR add-on installed.

keeps coming up with a error, even after insatlling to internal and formatting the data partition.

"the dependancy on kodi.binary.instance.pvr version 5.90.0"

Matt

That will be because the repo version is compiled against the new build i think.

Try using the version that initially came with 8.90.0. Solved it for me (pvr addon will be wanting to get updated). Installing to internal should be unrelated

Quote from atreyu

That will be because the repo version is compiled against the new build i think.

Try using the version that initially came with 8.90.0. Solved it for me (pvr addon will be wanting to get updated). Installing to internal should be unrelated

where can I get that from?

The misses is not happy lol

Matt

I am a little bit weird on that stuff and keep a copy of the addons\packages dir, where all your installed addons are cached.

Unfortunately, i cant provide you with a tvh copy, ‘cause i use a different backend.

It’s always a good idea to keep a full copy of a working installation as well.

In any case, better to be on the latest, so hoping this gets solved in 8.90.2

I normally do keep a backup but with all the changes and different builds I’ve let it slip.

If anyone could link me to a working Tvheadend for 8.90.0 I would be great full.

Thanks.

Quote from matt77303

If anyone could link me to a working Tvheadend for 8.90.0 I would be great full.

This one is working well: service.tvheadend42

Quote from matt77303

I normally do keep a backup but with all the changes and different builds I’ve let it slip.

If anyone could link me to a working Tvheadend for 8.90.0 I would be great full.

Thanks.

this one worked for me with 8.90.0 (on Odroid C2)

service.tvheadend44

Thanks. I’ll try them both later.

Matt

dmod33 and caligari Didn’t get chance to try the above last night, are the Tvheadend server or client? I need the client.

Thanks

Matt

* never mind found a backup of this box I did before I upgraded to 8.90.1, thanks.

Does anyone have the latest widevine files that work with netflix?

Quote from Gappy

Does anyone have the latest widevine files that work with netflix?

Here, I had to install, wait for the complete installation of the widevine, then uninstall the NF addon and reinstall. Np inputsream, automatic is only entering as 480p. Opting for manual, this is 720p. To enter 720p, np inpustream, I enabled 720p / 720p