DDR V1.09 a930779e06 typ 22/11/21-17:50:56 LPDDR4X, 2112MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB Manufacturer ID:0x6 CH0 RX Vref:30.7%, TX Vref:23.8%,22.8% CH1 RX Vref:30.7%, TX Vref:21.8%,20.8% CH2 RX Vref:29.7%, TX Vref:21.8%,22.8% CH3 RX Vref:30.7%, TX Vref:21.8%,20.8% change to F1: 528MHz change to F2: 1068MHz change to F3: 1560MHz change to F0: 2112MHz out U-Boot SPL board init U-Boot SPL 2017.09-armbian (Feb 04 2025 - 13:52:22) Trying to boot from MMC2 Card did not respond to voltage select! spl: mmc init failed with error: -95 Trying to boot from MMC1 Trying fit image at 0x4000 sector ## Verified-boot: 0 ## Checking atf-1 0x00040000 ... sha256(909ea14106...) + OK ## Checking uboot 0x00200000 ... sha256(37577365c3...) + OK ## Checking fdt 0x003387e8 ... sha256(4e5b3a8043...) + OK ## Checking atf-2 0x000f0000 ... sha256(6a970ae6b4...) + OK ## Checking atf-3 0xff100000 ... sha256(3ea8cf0d7e...) + OK Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000) Total: 524.730 ms INFO: Preloader serial: 2 NOTICE: BL31: v2.3():v2.3-468-ge529a2760:derrick.huang NOTICE: BL31: Built : 09:59:49, Nov 21 2022 INFO: spec: 0x13 INFO: ext 32k is valid INFO: ddr: stride-en 4CH INFO: GICv3 without legacy support detected. INFO: ARM GICv3 driver initialized in EL3 INFO: valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0 INFO: system boots from cpu-hwid-0 INFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001 INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz INFO: BL31: Initialising Exception Handling Framework INFO: BL31: Initializing runtime services WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK ERROR: Error initializing runtime service opteed_fast INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x200000 INFO: SPSR = 0x3c9 U-Boot 2017.09-armbian (Feb 04 2025 - 13:52:22 +0300) Model: Khadas Edge2 PreSerial: 2, raw, 0xfeb50000 DRAM: 16 GiB Sysmem: init Relocation Offset: edb3e000 Relocation fdt: eb9f94c8 - eb9fece0 CR: M/C/I Using default environment mmc@fe2c0000: 1, mmc@fe2e0000: 0 Bootdev(atags): mmc 0 MMC0: HS200, 200Mhz PartType: EFI DM: v2 No misc partition boot mode: normal ** File not found /dtb.img ** gpio: pin 130 (gpio 130) value is 1 Model: Khadas Edge2 CLK: (sync kernel. arm: enter 1008000 KHz, init 1008000 KHz, kernel 0N/A) b0pll 24000 KHz b1pll 24000 KHz lpll 24000 KHz v0pll 24000 KHz aupll 24000 KHz cpll 1500000 KHz gpll 1188000 KHz npll 24000 KHz ppll 100000 KHz aclk_center_root 702000 KHz pclk_center_root 100000 KHz hclk_center_root 396000 KHz aclk_center_low_root 500000 KHz aclk_top_root 750000 KHz pclk_top_root 100000 KHz aclk_low_top_root 396000 KHz Setting bus to 2 Failure changing bus number (-19) No I2C bus selected Error writing the chip: -19 gpio: pin 138 (gpio 138) value is 1 gpio: pin 139 (gpio 139) value is 0 gpio: pin 140 (gpio 140) value is 0 Net: No ethernet found. Hit key to stop autoboot('CTRL+C'): 0 starting USB... Bus usb@fc800000: USB EHCI 1.00 Bus usb@fc840000: USB OHCI 1.0 Bus usb@fc880000: USB EHCI 1.00 Bus usb@fc8c0000: USB OHCI 1.0 scanning bus usb@fc800000 for devices... ERROR: Invalid USB EP length (9) ERROR: Invalid USB EP length (9) ERROR: Invalid USB EP length (9) ERROR: Invalid USB EP length (9) ERROR: Invalid USB EP length (9) ERROR: Invalid USB EP length (9) ERROR: Invalid USB EP length (9) ERROR: Invalid USB EP length (9) ERROR: Invalid USB EP length (9) WARN: interface 0 has 0 endpoint descriptor, different from the interface descriptor's value: 1 9 USB Device(s) found scanning bus usb@fc840000 for devices... 1 USB Device(s) found scanning bus usb@fc880000 for devices... 2 USB Device(s) found scanning bus usb@fc8c0000 for devices... 1 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found Device 0: Vendor: Verbatim Rev: PMAP Prod: STORE N GO Type: Removable Hard Disk Capacity: 14806.0 MB = 14.4 GB (30322688 x 512) ... is now current device Scanning usb 0:1... Found /extlinux/extlinux.conf Retrieving file: /extlinux/extlinux.conf reading /extlinux/extlinux.conf 235 bytes read in 76 ms (2.9 KiB/s) 1: LibreELEC Retrieving file: /KERNEL reading /KERNEL 70242816 bytes read in 2539 ms (26.4 MiB/s) append: boot=LABEL=LIBREELEC disk=LABEL=STORAGE quiet console=ttyFIQ0,1500000 console=tty0 systemd.debug_shell=ttyFIQ0 coherent_pool=2M cec.debounce_ms=5000 Retrieving file: /dtb/rockchip/rk3588s-khadas-edge2.dtb reading /dtb/rockchip/rk3588s-khadas-edge2.dtb 241292 bytes read in 205 ms (1.1 MiB/s) Fdt Ramdisk skip relocation No misc partition ## Flattened Device Tree blob at 0x0a100000 Booting using the fdt blob at 0x0a100000 'reserved-memory' ramoops@110000: addr=110000 size=e0000 Using Device Tree in place at 000000000a100000, end 000000000a13de8b Adding bank: 0x00200000 - 0xf0000000 (size: 0xefe00000) Adding bank: 0x100000000 - 0x3fc000000 (size: 0x2fc000000) Adding bank: 0x3fc500000 - 0x3fff00000 (size: 0x03a00000) Adding bank: 0x4f0000000 - 0x500000000 (size: 0x10000000) Total: 10514.412 ms Starting kernel ... [ 10.554031] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB [ 10.554046] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-cubic-lut@00000000': base 0x0000000000000000, size 0 MiB [ 11.843795] fiq_debugger fiq_debugger.0: error -ENXIO: IRQ fiq not found [ 11.843810] fiq_debugger fiq_debugger.0: error -ENXIO: IRQ wakeup not found [ 11.843818] fiq_debugger_probe: could not install nmi irq handler [ 11.913184] dw-pcie fe190000.pcie: invalid resource [ 11.913200] dw-pcie fe190000.pcie: Failed to initialize host [ 11.955601] rockchip-vop2 fdd90000.vop: error -ENODEV: _opp_set_regulators: no regulator (vop) found [ 11.955640] rockchip-vop2 fdd90000.vop: failed to set opp config [ 11.955649] rockchip-vop2 fdd90000.vop: failed to init opp info [ 11.955656] rockchip-vop2 fdd90000.vop: failed to init_opp_table [ 12.092495] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy pll locked! [ 12.092761] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy lane locked! [ 12.203677] rk806 spi2.0: no sleep-setting state [ 12.203717] rk806 spi2.0: no reset-setting pinctrl state [ 12.203742] rk806 spi2.0: no dvs-setting pinctrl state [ 12.236024] .. rk pwm remotectl v2.0 init [ 12.364900] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active. [ 12.372901] debugfs: File 'Capture' in directory 'dapm' already present! [ 12.442711] mpp-iep2 fdbb0000.iep: allocate roi buffer failed [ 12.445092] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_a is not found! [ 12.445169] rkvdec2_init:982: No niu aclk reset resource define [ 12.445219] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_h is not found! [ 12.445269] rkvdec2_init:985: No niu hclk reset resource define [ 12.446665] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_a is not found! [ 12.446729] rkvdec2_init:982: No niu aclk reset resource define [ 12.446778] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_h is not found! [ 12.446828] rkvdec2_init:985: No niu hclk reset resource define [ 12.448175] mpp_rkvenc2 fdbd0000.rkvenc-core: rockchip_init_read_margin: no regulator (venc) found: -19 [ 12.448598] mpp_rkvenc2 fdbd0000.rkvenc-core: error -ENODEV: _opp_set_regulators: no regulator (venc) found [ 12.448698] mpp_rkvenc2 fdbd0000.rkvenc-core: failed to set opp config [ 12.448749] mpp_rkvenc2 fdbd0000.rkvenc-core: failed to init opp info [ 12.448799] mpp_rkvenc2 fdbd0000.rkvenc-core: failed to init_opp_table [ 12.448848] rkvenc_init:1870: failed to add venc devfreq [ 12.449883] mpp_rkvenc2 fdbe0000.rkvenc-core: rockchip_init_read_margin: no regulator (venc) found: -19 [ 12.450261] mpp_rkvenc2 fdbe0000.rkvenc-core: error -ENODEV: _opp_set_regulators: no regulator (venc) found [ 12.450353] mpp_rkvenc2 fdbe0000.rkvenc-core: failed to set opp config [ 12.450405] mpp_rkvenc2 fdbe0000.rkvenc-core: failed to init opp info [ 12.450455] mpp_rkvenc2 fdbe0000.rkvenc-core: failed to init_opp_table [ 12.450503] rkvenc_init:1870: failed to add venc devfreq [ 12.455762] rockchip-dmc dmc: Current ATF unsupported get_stall_time [ 12.455900] rockchip-dmc dmc: failed to get vop bandwidth to dmc rate [ 12.455951] rockchip-dmc dmc: failed to get vop pn to msch rl [ 12.549009] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdab0000-0xfdabffff] [ 12.549125] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdac0000-0xfdacffff] [ 12.549198] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdad0000-0xfdadffff] [ 12.552975] debugfs: Directory 'fdab0000.npu-rknpu' with parent 'vdd_npu_s0' already present! [ 12.565066] debugfs: Directory 'fdab0000.npu-rknpu' with parent 'vdd_npu_s0' already present! [ 12.565653] debugfs: File 'uA_load' in directory '/' already present! [ 12.565713] debugfs: File 'min_uV' in directory '/' already present! [ 12.565764] debugfs: File 'max_uV' in directory '/' already present! [ 12.565815] debugfs: File 'constraint_flags' in directory '/' already present! [ 12.645691] integrity: Unable to open file: /etc/keys/x509_ima.der (-2)