[    0.000000@0] Initializing cgroup subsys cpuset
[    0.000000@0] Initializing cgroup subsys cpu
[    0.000000@0] Initializing cgroup subsys cpuacct
[    0.000000@0] Linux version 3.14.29 (afl1@afl1) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #1 SMP Sun Feb 5 09:30:22 CET 2017
[    0.000000@0] CPU: AArch64 Processor [410fd034] revision 4
[    0.000000@0] no prop version_code
[    0.000000@0] bootconsole [earlycon0] enabled
[    0.000000@0] fdt Reserved memory table:
[    0.000000@0]            linux,meson-fb: 0x000000003e000000 - 0x0000000040000000  (32 MiB)
[    0.000000@0]                  linux,di: 0x000000003c200000 - 0x000000003e000000  (30 MiB)
[    0.000000@0] DI: DI reserved memory: created CMA memory pool at 0x000000003c200000, size 30 MiB
[    0.000000@0]             linux,ion-dev: 0x000000003a200000 - 0x000000003c200000  (32 MiB)
[    0.000000@0]               linux,ppmgr: 0x000000003a200000 - 0x000000003a200000  (0 MiB)
[    0.000000@0]        linux,codec_mm_cma: 0x0000000027800000 - 0x0000000033800000  (192 MiB)
[    0.000000@0]              linux,picdec: 0x000000003a200000 - 0x000000003a200000  (0 MiB)
[    0.000000@0] Reserved memory: incorrect alignment of CMA region
[    0.000000@0]   linux,codec_mm_reserved: 0x0000000036100000 - 0x000000003a200000  (65 MiB)
[    0.000000@0] fdt Reserved memory total:  354 MiB
[    0.000000@0] cma: Reserved 8 MiB at 35800000
[    0.000000@0] On node 0 totalpages: 252928
[    0.000000@0]   Normal zone: 4460 pages used for memmap
[    0.000000@0]   Normal zone: 0 pages reserved
[    0.000000@0]   Normal zone: 252928 pages, LIFO batch:31
[    0.000000@0] psci: probing function IDs from device-tree
[    0.000000@0] PERCPU: Embedded 12 pages/cpu @ffffffc0360a7000 s18112 r8192 d22848 u49152
[    0.000000@0] pcpu-alloc: s18112 r8192 d22848 u49152 alloc=12*4096
[    0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000@0] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 248468
[    0.000000@0] Kernel command line: rootfstype=ramfs init=/init console=ttyS0,115200 no_console_suspend earlyprintk=aml-uart,0xc81004c0 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 androidboot.selinux=permissive androidboot.selinux=permissive logo=osd1,loaded,0x3d800000,1080p60hz maxcpus=4 vout=1080p60hz,enable hdmimode=1080p60hz cvbsmode=576cvbs hdmitx= cvbsdrv=0 androidboot.firstboot=0 jtag=apao androidboot.hardware=amlogic mac=c4:2f:ad:03:21:43 androidboot.mac=c4:2f:ad:03:21:43 bootfromsd console=tty0 ssh systemd.show_status=auto coherent_pool=4M
[    0.000000@0] logo: osd1
[    0.000000@0] logo: loaded
[    0.000000@0] logo: 0x3d800000
[    0.000000@0] logo: 1080p60hz
[    0.000000@0] vout_serve: 1080p60hz
[    0.000000@0] vout_serve: en: 1
[    0.000000@0] logo: get hdmimode: 1080p60hz
[    0.000000@0] logo: get cvbsmode: 576cvbs
[    0.000000@0] tv_vout: cvbs performance line = 0
[    0.000000@0] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000@0] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000@0] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.000000@0] Memory: 634212K/1011712K available (7444K kernel code, 775K rwdata, 2836K rodata, 889K init, 5206K bss, 377500K reserved)
[    0.000000@0] Virtual kernel memory layout:
[    0.000000@0]     vmalloc : 0xffffff8000000000 - 0xffffff8040000000   (  1024 MB)
[    0.000000@0]     vmemmap : 0xffffff8040010000 - 0xffffff8041180000   (    17 MB)
[    0.000000@0]     modules : 0xffffffbffc000000 - 0xffffffc000000000   (    64 MB)
[    0.000000@0]     memory  : 0xffffffc000000000 - 0xffffffc03e000000   (   992 MB)
[    0.000000@0]       .init : 0xffffffc001a8c000 - 0xffffffc001b6a6c0   (   890 kB)
[    0.000000@0]       .text : 0xffffffc001080000 - 0xffffffc001a8b364   ( 10285 kB)
[    0.000000@0]       .data : 0xffffffc001b6b000 - 0xffffffc001c2cf70   (   776 kB)
[    0.000000@0] PM: Registered nosave memory: [mem 0x01080000-0x01a8afff]
[    0.000000@0] SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=4, Nodes=1
[    0.000000@0] arch_multi_cluster:0
[    0.000000@0] Hierarchical RCU implementation.
[    0.000000@0] 	RCU debugfs-based tracing is enabled.
[    0.000000@0] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000@0] NR_IRQS:64 nr_irqs:64 0
[    0.000000@0] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000004@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
[    0.008243@0] meson_bc_timer: mclk->mux_reg =ffffff800000c990,mclk->reg =ffffff800000e994
[    0.016761@0] Console: colour dummy device 80x25
[    0.021086@0] console [tty0] enabled
[    0.024672@0] bootconsole [earlycon0] disabled
[    0.030340@0] allocated 4194304 bytes of page_cgroup
[    0.030349@0] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.030370@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.030387@0] pid_max: default: 32768 minimum: 301
[    0.030520@0] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[    0.030533@0] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[    0.032487@0] device-tree: Duplicate name in /efusekey, renamed to "key0#1"
[    0.032512@0] device-tree: Duplicate name in /efusekey, renamed to "key1#1"
[    0.032525@0] device-tree: Duplicate name in /efusekey, renamed to "key2#1"
[    0.032538@0] device-tree: Duplicate name in /efusekey, renamed to "key3#1"
[    0.035162@0] Initializing cgroup subsys memory
[    0.035189@0] Initializing cgroup subsys devices
[    0.035199@0] Initializing cgroup subsys freezer
[    0.035215@0] Initializing cgroup subsys blkio
[    0.035259@0] ftrace: allocating 26302 entries in 103 pages
[    0.062165@0] /cpus/cpu@0: Missing clock-frequency property
[    0.062194@0] /cpus/cpu@1: Missing clock-frequency property
[    0.062205@0] /cpus/cpu@2: Missing clock-frequency property
[    0.062217@0] /cpus/cpu@3: Missing clock-frequency property
[    0.062789@0] Meson chip version = RevA (21:A - 82:0)
[    0.063163@1] CPU1: Booted secondary processor
[    0.063545@2] CPU2: Booted secondary processor
[    0.063886@3] CPU3: Booted secondary processor
[    0.063953@0] Brought up 4 CPUs
[    0.063992@0] SMP: Total of 4 processors activated.
[    0.064505@0] devtmpfs: initialized
[    0.071713@0] instabooting: 0
[    0.078541@0] pinctrl core: initialized pinctrl subsystem
[    0.079192@0] regulator-dummy: no parameters
[    0.079918@0] NET: Registered protocol family 16
[    0.082498@0] cpuidle: using governor menu
[    0.082644@0] aml_vdac_init: module init
[    0.082781@0] register canvas platform driver
[    0.082854@0] register rdma platform driver
[    0.084522@0] vdso: 2 pages (1 code, 1 data) at base ffffffc001b74000
[    0.086263@0] DMA: preallocated 4096 KiB pool for atomic allocations
[    0.087476@0] software IO TLB [mem 0x26400000-0x26800000] (4MB) mapped at [ffffffc026400000-ffffffc0267fffff]
[    0.087930@0] aml_i2c version: 20140813
[    0.088139@0] i2c-core: driver [pmu4] using legacy resume method
[    0.088213@0] codec_mm:codec_mm_module_init
[    0.088491@0] gxbb_mpll_clk: register mpll_clk_out0 success done
[    0.088513@0] gxbb_mpll_clk: register mpll_clk_out1 success done
[    0.088525@0] gxbb_mpll_clk: register mpll_clk_out2 success done
[    0.088719@0] clk_sys: register PLL sys_pll success done
[    0.088738@0] gxl_clk: [ xtal 	] ->clockrate: 24000000Hz
[    0.088748@0] gxl_clk: [ 32Khz 	] ->clockrate: 32000Hz
[    0.088758@0] gxl_clk: [ clk81 	] ->clockrate: 166666666Hz
[    0.088768@0] gxl_clk: [ fixed_pll 	] ->clockrate: 2000000000Hz
[    0.088778@0] gxl_clk: [ fclk_div2 	] ->clockrate: 1000000000Hz
[    0.088787@0] gxl_clk: [ fclk_div3 	] ->clockrate: 666666666Hz
[    0.088797@0] gxl_clk: [ fclk_div4 	] ->clockrate: 500000000Hz
[    0.088806@0] gxl_clk: [ fclk_div5 	] ->clockrate: 400000000Hz
[    0.088815@0] gxl_clk: [ fclk_div7 	] ->clockrate: 285714285Hz
[    0.088850@0] gxl_clk: clock initialization complete
[    0.089061@0] clkmsr: Gxl msr_clk_reg0=ffffff800041c75c,msr_clk_reg2=ffffff800041e764
[    0.091316@0] aml_iomap: amlogic iomap probe done
[    0.091953@0] pinmux-gxl c1109880.pinmux: Init pinux probe!
[    0.092786@0] pinmux-gxl c1109880.pinmux: Probed amlogic pinctrl driver
[    0.093378@0] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xc0)
[    0.093412@0] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xc0)
[    0.093588@0] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xc0)
[    0.093611@0] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xc0)
[    0.097806@0] codec_mm has 2 memory regions
[    0.097862@0] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_cma ok
[    0.097882@0] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_reserved ok
[    0.097980@0] codec_mm has 2 memory regions
[    0.098001@0] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_cma ok
[    0.098018@0] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_reserved ok
[    0.099605@0] vpu: driver version: v02
[    0.099647@0] vpu: load vpu_clk: 666667000Hz(7)
[    0.099732@0] vpu: vpu_probe OK
[    0.101111@0] tv_vout: tvout_probe
[    0.101137@0] tv_vout: major number 254 for disp
[    0.101146@0] vout_notify: vout_register_server
[    0.101155@0] tv_vout: register tv module server ok
[    0.101235@0] tv_vout: tvout_probe OK
[    0.101757@0] canvas_probe reg=00000000c8838000,size=400
[    0.101788@0] canvas maped reg_base =ffffff800043e000
[    0.105651@0] rdma_probe
[    0.312777@0] bio: create slab <bio-0> at 0
[    0.313674@0] SCSI subsystem initialized
[    0.314139@0] usbcore: registered new interface driver usbfs
[    0.314233@0] usbcore: registered new interface driver hub
[    0.314353@0] usbcore: registered new device driver usb
[    0.315153@0] i2c-gpio i2c_gpio.37: using pins 172 (SDA) and 173 (SCL)
[    0.315346@0] pps_core: LinuxPPS API ver. 1 registered
[    0.315359@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.315426@0] PTP clock support registered
[    0.315892@0] hdmitx: system: amhdmitx_init
[    0.315905@0] hdmitx: system: Ver: 2014May6
[    0.316083@0] hdmitx: system: amhdmitx_probe
[    0.316422@0] hdmitx: system: not find match init-data
[    0.316435@0] hdmitx: system: not find match pwr-ctl
[    0.316445@0] hdmitx hpd irq = 89
[    0.316892@0] hdmitx20: Mapped PHY: 0xc0800000
[    0.316912@0] hdmitx20: Mapped PHY: 0xc1104400
[    0.316940@0] hdmitx20: Mapped PHY: 0xc8100000
[    0.316950@0] hdmitx20: Mapped PHY: 0xc8834000
[    0.316959@0] hdmitx20: Mapped PHY: 0xc883a000
[    0.316968@0] hdmitx20: Mapped PHY: 0xc883c000
[    0.316981@0] hdmitx20: Mapped PHY: 0xd0100000
[    0.316991@0] hdmitx20: Mapped PHY: 0xda83a000
[    0.317007@0] hdmitx: alread display in uboot 0x10
[    0.317033@0] avmute set to 1
[    0.317354@0] vout_serve: vout_init_module
[    0.317500@0] tv_vout: tv_set_current_vmode[759]fps_target_mode=16
[    0.317514@0] tv_vout: mode is 16,sync_duration_den=1,sync_duration_num=60
[    0.317529@0] tv_vout: already display in uboot
[    0.317538@0] vout_serve: vinfo mode is: 1080p60hz
[    0.317547@0] vout_serve: init mode 1080p60hz
[    0.317638@0] vout_serve: create vout attribute OK
[    0.317650@0] vout_serve: meson_vout_probe OK
[    0.317830@0] logo: logo_init
[    0.318165@0] osd_rdma: osd_rdma_init: rdma_table p=0x35c01000,op=0x35c01000 , v=0xffffff8000471000
[    0.318183@0] osd_rdma: osd rdma request irq as second interrput function!
[    0.318368@0] Advanced Linux Sound Architecture Driver Initialized.
[    0.320914@0] Switched to clocksource arch_sys_counter
[    0.324086@0] hdmitx: system: irq 80000002
[    0.341271@0] NET: Registered protocol family 2
[    0.341811@0] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.341888@0] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[    0.342008@0] TCP: Hash tables configured (established 8192 bind 8192)
[    0.342094@0] TCP: reno registered
[    0.342113@0] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.342144@0] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.342338@0] NET: Registered protocol family 1
[    0.342600@0] RPC: Registered named UNIX socket transport module.
[    0.342617@0] RPC: Registered udp transport module.
[    0.342626@0] RPC: Registered tcp transport module.
[    0.342635@0] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.342857@0] aml_wifi wifi.32: [wifi_dev_probe] no power_on_pin2
[    0.342870@0] aml_wifi wifi.32: [wifi_dev_probe] set pwm as 32k output
[    0.342928@0] aml_wifi wifi.32: [wifi_dev_probe] interrupt_pin=241
[    0.342940@0] aml_wifi wifi.32: [wifi_dev_probe] irq_num=100, irq_trigger_type=1
[    0.342954@0] aml_wifi wifi.32: [wifi_dev_probe] power_on_pin=240
[    0.342966@0] aml_wifi wifi.32: [wifi_dev_probe] clock_32k_pin=0
[    0.343334@0] aml_wifi wifi.32: [wifi_setup_dt] wifi_setup_dt
[    0.343378@0] aml_wifi wifi.32: [wifi_setup_dt] interrupt_pin(241)
[    0.343399@0] aml_wifi wifi.32: [wifi_setup_dt] power_on_pin(240)
[    0.343604@0] Unpacking initramfs...
[    0.374927@0] Freeing initrd memory: 3016K (ffffffc033bc4000 - ffffffc033eb6000)
[    0.378075@0] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.387092@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.388535@0] NFS: Registering the id_resolver key type
[    0.388587@0] Key type id_resolver registered
[    0.388597@0] Key type id_legacy registered
[    0.388615@0] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.389339@0] msgmni has been set to 1644
[    0.390425@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.390519@0] io scheduler noop registered (default)
[    0.390532@0] io scheduler deadline registered
[    0.390561@0] io scheduler cfq registered
[    0.391901@0] meson-rng c8834000.rng: hwrng registered
[    0.395832@0] loop: module loaded
[    0.395979@0] Loading iSCSI transport class v2.0-870.
[    0.396604@0] iscsi: registered transport (tcp)
[    0.398392@0] tun: Universal TUN/TAP device driver, 1.6
[    0.398415@0] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.402607@0] libphy: stmmac: probed
[    0.402634@0] eth0: PHY ID 01814400 at 8 IRQ POLL (stmmac-0:08) active
[    0.403086@0] PPP generic driver version 2.4.2
[    0.403342@0] NET: Registered protocol family 24
[    0.403464@0] usbcore: registered new interface driver smsc95xx
[    0.403825@0] platform c9000000.dwc3: Driver dwc3 requests probe deferral
[    0.403961@0] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.403975@0] ehci-h20ahb: H20AHB-EHCI Host Controller driver
[    0.404209@0] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.404538@0] usbcore: registered new interface driver usb-storage
[    0.404771@0] usbcore: registered new interface driver usbserial
[    0.404866@0] usbcore: registered new interface driver usbserial_generic
[    0.404953@0] usbserial: USB Serial support registered for generic
[    0.405042@0] usbcore: registered new interface driver pl2303
[    0.405127@0] usbserial: USB Serial support registered for pl2303
[    0.405699@0] amlogic-new-usb2 d0078000.usb2phy: USB2 phy probe:phy_mem:0xd0078000, iomap phy_base:0xffffff800047e000
[    0.405907@0] amlogic-new-usb3 d0078080.usb3phy: This phy has no usb port
[    0.405937@0] amlogic-new-usb3 d0078080.usb3phy: USB3 phy probe:phy_mem:0xd0078080, iomap phy_base:0xffffff8000582080
[    0.406292@0] mousedev: PS/2 mouse device common for all mice
[    0.406447@0] i2c /dev entries driver
[    0.407113@0] CPUidle arm64: cpuidle init start!!
[    0.407304@0] ledtrig-cpu: registered to indicate activity on CPUs
[    0.407463@0] hidraw: raw HID events driver (C) Jiri Kosina
[    0.409567@0] usbcore: registered new interface driver usbhid
[    0.409591@0] usbhid: USB HID core driver
[    0.409886@0] meson_uart c81004c0.serial: ==uart0 reg addr = ffffff80005844c0
[    0.409925@0] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 225, base_baud = 1500000) is a meson_uart
[    0.409951@0] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200
[    1.811312@3] console [ttyS0] enabled
[    1.811467@0] hdmitx: plugin
[    1.818271@1] meson_uart c11084c0.serial: ==uart1 reg addr = ffffff80005864c0
[    1.824878@1] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud = 1500000) is a meson_uart
[    1.835403@1] hdmitx: system: hdmitx_hdcp_init
[    1.838689@1] ESM HLD: Initializing...
[    1.842262@1] ESM HLD: Registering device range 'esm'...
[    1.847530@1] ESM HLD: Device range 'esm' has been registered.
[    1.853306@1] ESM HLD: Creating class /sys/class/elliptic...
[    1.859106@1] ESM HLD: The class /sys/class/elliptic has been created.
[    1.865370@1] ESM HLD: Creating device 'esm'...
[    1.870080@1] ESM HLD: Device 'esm' has been created.
[    1.874898@1] ESM HLD: Done initializing the HLD driver.
[    1.896206@1] aml_vrtc rtc.31: rtc core: registered aml_vrtc as rtc0
[    1.897621@1] secmon has 1 memory regions
[    1.900950@1] secmon: share in base: 0xffffff800058e000, share out base: 0xffffff800059a000
[    1.909181@1] secmon secmon.4: assigned reserved memory node linux,secmon ok
[    1.916166@1] secmon: probe done
[    1.919719@1] storage: storage in base: 0xffffff8001a00000
[    1.924795@1] storage: storage out base: 0xffffff8001a80000
[    1.930305@1] storage: storage block base: 0xffffff8001b00000
[    1.936002@1] storage: probe done!
[    1.939908@1] aml_sd_emmc_probe: line 3558
[    1.943437@1] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error
[    1.946316@0] hdmitx: edid: check sum valid
[    1.946317@0] hdmitx: edid: check sum valid
[    1.946322@0] hdmitx: edid: blk0 raw data
[    1.946360@0] 00ffffffffffff001e6d0100010101010117010380a05a780aee91a3544c9926
[    1.946360@0] 0f5054a1080031404540614071408180010101010101023a801871382d40582c
[    1.946360@0] 4500a05a0000001e662150b051001b3040703600a05a0000001e000000fd003a
[    1.946360@0] 3e1e5310000a202020202020000000fc004c472054560a202020202020200142
[    1.946360@0] 
[    1.946360@0] 
[    1.946362@0] hdmitx: edid: blk1 raw data
[    1.946399@0] 020333f14e109f0413051403021220212215012615075009570778030c001000
[    1.946399@0] 801e20c00e01400a0f08101810981058103810011d8018711c1620582c250020
[    1.946399@0] c23100009e011d007251d01e206e28550020c23100001e023a801871382d4058
[    1.946399@0] 2c4500a05a0000001e011d00bc52d01e20b8285540c48e2100001e0000000023
[    1.946399@0] 
[    1.946399@0] 
[    1.946403@0] EDID Parser:
[    2.036093@0] hdmitx: edid: find IEEEOUT
[    2.036146@1] aml_sd_emmc_reg_init 1146
[    2.036211@1] get property:                ocr_avail, value:0x00200080
[    2.036214@1] get property:                    f_min, value:300000
[    2.036216@1] get property:                    f_max, value:100000000
[    2.036219@1] get property:             max_req_size, value:0x00020000
[    2.036226@1] get property:                  pinname, str:emmc
[    2.036231@1] get property:                card_type, value:1
[    2.036258@1] get property:                gpio_dat3, str:
[    2.036261@1] get property:                 hw_reset, str:
[    2.036289@1] emmc:pdata->caps = c0000d47
[    2.036294@1] emmc:pdata->caps2 = 18060
[    2.036310@1] storage 1, boot 1
[    2.036312@1] get_storage_dev return 1
[    2.070931@1] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
[    2.076319@1] aml_sd_emmc_probe: line 3558
[    2.076732@1] aml_sd_emmc_reg_init 1146
[    2.076792@1] get property:                ocr_avail, value:0x00200080
[    2.076794@1] get property:                    f_min, value:400000
[    2.076797@1] get property:                    f_max, value:100000000
[    2.076800@1] get property:             max_req_size, value:0x00020000
[    2.076802@1] get property:                   irq_in, value:3
[    2.076805@1] get property:                  irq_out, value:5
[    2.076822@1] get property:                  gpio_cd, str:
[    2.076826@1] get property:                  pinname, str:sd
[    2.076830@1] get property:                 jtag_pin, str:
[    2.076834@1] get property:                card_type, value:5
[    2.076837@1] get property:                gpio_dat3, str:
[    2.076850@1] sd:pdata->caps = 7
[    2.076853@1] sd:pdata->caps2 = 0
[    2.111102@1] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
[    2.111152@1] aml_sd_emmc_probe: line 3558
[    2.111451@1] aml_sd_emmc_reg_init 1146
[    2.111509@1] get property:                ocr_avail, value:0x00200080
[    2.111512@1] get property:                    f_min, value:400000
[    2.111514@1] get property:                    f_max, value:200000000
[    2.111517@1] get property:             max_req_size, value:0x00020000
[    2.111523@1] get property:                  pinname, str:sdio
[    2.111528@1] get property:                card_type, value:3
[    2.111562@1] sdio:pdata->caps = 7810f
[    2.111564@1] sdio:pdata->caps2 = 0
[    2.150929@1] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
[    2.151374@1] ion_dev has 1 memory regions
[    2.154424@1] fb: osd_init_module
[    2.154593@1] fb: viu vsync irq: 35
[    2.154602@1] meson-fb has 1 memory regions
[    2.154655@1] meson-fb meson-fb.16: assigned reserved memory node linux,meson-fb ok
[    2.154672@1] fb: osd_probe vinfo:ffffffc001be1518
[    2.154678@1] fb: init fbdev bpp is:32
[    2.284694@0] hdmitx: edid: check sum valid
[    2.284704@3] [aml_is_card_insert] card IN
[    2.292741@0] hdmitx: edid: check sum valid
[    2.300341@1] fb: osd probe OK
[    2.302881@1] ge2d: ge2d_init_module
[    2.303446@1] ge2d: ge2d_dev major:244
[    2.307594@1] ge2d: ge2d clock is 400 MHZ
[    2.311114@1] ge2d: ge2d: pdev=ffffffc010390800, irq=182, rstc=0xffffffc0003c0040, clk=ffffffc01027ad00
[    2.320464@1] ge2d: mapped phy: 0xd0160000
[    2.324483@1] ge2d: ge2d start monitor
[    2.328328@2] ge2d: ge2d workqueue monitor start
[    2.328992@1] codec:Amlogic A/V streaming port init
[    2.331290@1] codec:get gate demux control ok ffffffc0003fb300
[    2.331297@1] codec:get gate parser_top control ok ffffffc0003fb380
[    2.331301@1] codec:get gate vpu_intr control ok ffffffc0003fb400
[    2.331307@1] codec:get gate vdec control ok ffffffc0003fb480
[    2.332171@1] codec:[tsync_pcr_init]init success.
[    2.332175@1] codec:amvideocap_init_module
[    2.332364@1] codec:amvideocap_probe,amvideocap
[    2.332369@1] codec:use cma buf.
[    2.332372@1] codec:amvideocap_dev_register
[    2.335390@1] codec:create_ge2d_work_queue video task ok
[    2.386022@3] normal card in
[    2.386119@0] hdmitx: update RX hdr info 0
[    2.388176@0] [RX]-receive ksv list len:1,depth:1,cas:0,dev:0
[    2.388184@0] hdmitx: video: get current mode: 1080p60hz
[    2.388185@0] hdmitx: update rx hdr info 0
[    2.388206@0] hdmitx: get ext_name (null)
[    2.388214@0] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 16
[    2.388219@0] hdmtix: set audio
[    2.388229@0] hdmitx tx_aud_src = 0
[    2.388255@0] hdmitx: fs = 0, cd = 4, tmds_clk = 148500
[    2.388258@0] hdmitx aud_n_para = 6144
[    2.388275@0] hdmitx set channel status
[    2.438937@1] codec:used fix clk for vdec clk source!
[    2.443884@1] codec:register clk_set_setting cpu[33]
[    2.449080@1] DI: di_module_init ok.
[    2.452401@1] DI: di_module_init: major 240
[    2.456908@1] DI: di_probe
[    2.459462@1] deinterlace has 1 memory regions
[    2.463567@1] DI: di reveser memory 0x3c200000, size 30MB.
[    2.463579@1] deinterlace deinterlace.26: assigned reserved memory node linux,di ok
[    2.471234@0] di_irq:78,timerc_irq:38
[    2.474830@0] rdma_register, rdma_table_addr ffffff80005d4000 rdma_table_addr_phy 35c08000 reg_buf ffffffc025d58000
[    2.485119@0] rdma_register success, handle 1 table_size 8192
[    2.490833@0] DI: di_probe allocate rdma channel 1.
[    2.490863@1] emmc: BKOPS_EN bit is not set
[    2.499833@0] DI: DI hw version 2.
[    2.503178@0] 0x000000db:Y=db,U=0,V=0
[    2.506786@0] 0x000000dc:Y=dc,U=0,V=0
[    2.510408@0] 0x000000dd:Y=dd,U=0,V=0
[    2.514038@0] 0x000000de:Y=de,U=0,V=0
[    2.517673@0] 0x000000df:Y=df,U=0,V=0
[    2.521210@0] 0x000000e0:Y=e0,U=0,V=0
[    2.524898@0] 0x000000e1:Y=e1,U=0,V=0
[    2.528521@0] 0x000000e2:Y=e2,U=0,V=0
[    2.532164@0] 0x000000e3:Y=e3,U=0,V=0
[    2.532289@1] emmc: trying cali 0-th time(s)
[    2.539923@0] 0x000000f0:Y=f0,U=0,V=0
[    2.543559@0] 0x000000f1:Y=f1,U=0,V=0
[    2.547168@0] 0x000000f2:Y=f2,U=0,V=0
[    2.550809@0] 0x000000f3:Y=f3,U=0,V=0
[    2.554418@0] 0x000000f4:Y=f4,U=0,V=0
[    2.558036@0] 0x000000f5:Y=f5,U=0,V=0
[    2.561663@0] 0x000000f6:Y=f6,U=0,V=0
[    2.565283@0] 0x000000f7:Y=f7,U=0,V=0
[    2.568921@0] 0x000000f8:Y=f8,U=0,V=0
[    2.572531@0] 0x000000f9:Y=f9,U=0,V=0
[    2.576148@0] 0x000000fa:Y=fa,U=0,V=0
[    2.579771@0] 0x000000fb:Y=fb,U=0,V=0
[    2.583416@0] 0x000000fc:Y=fc,U=0,V=0
[    2.587196@3] DI: di_probe here.
[    2.590476@1] emmc: delay[0]= 2000 padding= 5, bidx=2
[    2.590706@3] efusekeynum: 4
[    2.590716@3] efusekeyname:             mac	offset:     0	size:     6
[    2.590722@3] efusekeyname:          mac_bt	offset:     6	size:     6
[    2.590728@3] efusekeyname:        mac_wifi	offset:    12	size:     6
[    2.590734@3] efusekeyname:            usid	offset:    18	size:    16
[    2.623616@1] emmc: delay[1]= 2200 padding= 4, bidx=2
[    2.628592@1] emmc: delay[2]= 1800 padding= 1, bidx=1
[    2.631233@0] efuse efuse.10: probe OK!
[    2.631754@0] key unify config unifykey-num is 14
[    2.631801@0] key unify fact unifykey-num is 14
[    2.631807@0] aml_unifykeys_probe:1273=============unifykey_devno:ee00000
[    2.632288@0] 6unifykey: device unifykeys created ok
[    2.632451@0] 6aml_unifykeys_init done!
[    2.632456@0] PPMGRDRV: warn: ppmgr module init func called
[    2.632637@0] PPMGRDRV: err: ppmgr_driver_probe called
[    2.632640@0] ppmgr has 1 memory regions
[    2.632696@0] PPMGRDRV: info: ppmgr_dev major:237
[    2.633041@0] PPMGRDRV: info: ppmgr_probe done
[    2.633539@0] amlogic rfkill init
[    2.633646@0] enter bt_probe of_node
[    2.633673@0] not get gpio_en
[    2.695450@1] power on valid level is high
[    2.695451@1] emmc: delay[3]= 2200 padding= 4, bidx=2
[    2.704493@1] emmc: delay[4]= 2400 padding= 3, bidx=2
[    2.709489@1] emmc: delay[5]= 2200 padding= 4, bidx=2
[    2.714496@1] emmc: delay[6]= 2200 padding= 4, bidx=2
[    2.719494@1] emmc: delay[7]= 2200 padding= 4, bidx=2
[    2.724501@1] emmc: calibration result @ 0: max(2400), min(1800)
[    2.730449@1] emmc: line_delay =0x11101312, max_cal_result =2400
[    2.736403@1] emmc: base_index_max 2, base_index_min 1
[    2.741511@3] emmc: clk 100000000 SDR mode tuning start
[    2.748729@1] emmc: rx_tuning_result[0] = 10
[    2.751266@1] emmc: rx_tuning_result[1] = 10
[    2.755488@1] emmc: rx_tuning_result[2] = 10
[    2.759715@1] emmc: rx_tuning_result[3] = 10
[    2.763965@1] emmc: rx_tuning_result[4] = 10
[    2.768167@1] emmc: rx_tuning_result[5] = 10
[    2.772446@1] emmc: rx_tuning_result[6] = 10
[    2.776654@1] emmc: rx_tuning_result[7] = 10
[    2.780880@1] emmc: rx_tuning_result[8] = 10
[    2.785114@1] emmc: rx_tuning_result[9] = 10
[    2.788925@1] emmc: best_win_start =0, best_win_size =10
[    2.794193@1] emmc: sd_emmc_regs->gclock=0x100024a,sd_emmc_regs->gadjust=0x2000
[    2.801437@1] emmc: gclock =0x100024a, gdelay=0x11101312, gadjust=0x2000
[    2.808355@1] emmc: new HS200 MMC card at address 0001
[    2.813168@1] emmc: clock 100000000, 8-bit-bus-width
[    2.813168@1]  
[    2.818726@1] mmcblk0: emmc:0001 NCard  7.21 GiB 
[    2.823193@1] mmcblk0boot0: emmc:0001 NCard  partition 1 4.00 MiB
[    2.829177@1] mmcblk0boot1: emmc:0001 NCard  partition 2 4.00 MiB
[    2.835233@1] mmcblk0rpmb: emmc:0001 NCard  partition 3 4.00 MiB
[    2.842092@2]  mmcblk0: unknown partition table
[    2.846282@1] [mmc_read_partition_tbl] mmc read partition OK!
[    2.851216@1] add_emmc_partition
[    2.854674@2] [mmcblk0p01]           bootloader  offset 0x000000000000, size 0x000000400000 
[    2.863003@2] [mmcblk0p02]             reserved  offset 0x000002400000, size 0x000004000000 
[    2.871355@2] [mmcblk0p03]                cache  offset 0x000006c00000, size 0x000020000000 
[    2.879662@2] [mmcblk0p04]                  env  offset 0x000027400000, size 0x000000800000 
[    2.888087@2] [mmcblk0p05]                 logo  offset 0x000028400000, size 0x000002000000 
[    2.896432@2] [mmcblk0p06]             recovery  offset 0x00002ac00000, size 0x000002000000 
[    2.904814@2] [mmcblk0p07]                  rsv  offset 0x00002d400000, size 0x000000800000 
[    2.913166@2] [mmcblk0p08]                  tee  offset 0x00002e400000, size 0x000000800000 
[    2.921543@2] [mmcblk0p09]                crypt  offset 0x00002f400000, size 0x000002000000 
[    2.929881@2] [mmcblk0p10]                 misc  offset 0x000031c00000, size 0x000002000000 
[    2.938271@2] [mmcblk0p11]            instaboot  offset 0x000034400000, size 0x000020000000 
[    2.946623@2] [mmcblk0p12]                 boot  offset 0x000054c00000, size 0x000002000000 
[    2.955014@2] [mmcblk0p13]               system  offset 0x000057400000, size 0x000040000000 
[    2.963371@2] [mmcblk0p14]                 data  offset 0x000097c00000, size 0x000136500000 
[    2.971556@2] card key: card_blk_probe.
[    2.975313@2] emmc_key_init:527 emmc key lba_start:0x12020,lba_end:0x12220
[    2.982132@2] emmc key: emmc_key_init:552 ok.
[    2.986438@2] amlmmc_dtb_init: register dtb chardev
[    2.991379@2] amlmmc_dtb_init: register dtb chardev OK<6>[    2.996261@2] Exit aml_emmc_partition_ops OK.
[    3.003513@2]  mmcblk0boot1: unknown partition table
[    3.006293@2]  mmcblk0boot0: unknown partition table
[    3.010593@2] clear_emmc_wait_flag
[    3.051180@0] audio_dsp: [dsp]register dsp to char divece(257)
[    3.052217@0] amaudio: amaudio: driver amaudio succuess!
[    3.056908@3] sd: new high speed SDHC card at address 0001
[    3.057380@0] [RX]-hdmirx: hdmirx_init.
[    3.057385@0] ESM HLD: Initializing...
[    3.057387@0] ESM HLD: Registering device range 'esm_rx'...
[    3.057399@0] ESM HLD: Device range 'esm_rx' has been registered.
[    3.057401@0] ESM HLD: Creating class /sys/class/elliptic_rx...
[    3.057478@0] ESM HLD: The class /sys/class/elliptic_rx has been created.
[    3.057479@0] ESM HLD: Creating device 'esm_rx'...
[    3.057723@0] ESM HLD: Device 'esm_rx' has been created.
[    3.057724@0] ESM HLD: Done initializing the HLD driver.
[    3.057727@0] module init
[    3.057942@0] 
[    3.057942@0]  VECM probe start
[    3.058303@0] aml_vecm_probe: ok
[    3.059110@0] saradc c1108680.saradc: initialized by BL30
[    3.059123@0] saradc c1108680.saradc: calibration start:
[    3.059171@0] saradc c1108680.saradc: nominal=0, value=4
[    3.059216@0] saradc c1108680.saradc: nominal=256, value=253
[    3.059260@0] saradc c1108680.saradc: nominal=512, value=503
[    3.059304@0] saradc c1108680.saradc: nominal=768, value=754
[    3.059348@0] saradc c1108680.saradc: nominal=1023, value=1003
[    3.059352@0] saradc c1108680.saradc: calibration end: coef=4185
[    3.059570@0] remote: Driver init
[    3.059657@0] remote: platform_data g_remote_ao_offset=580
[    3.059660@0] remote: platform_data irq =228
[    3.059698@0] remote: set drvdata completed
[    3.059713@0] remote: device_create_file completed 
[    3.060071@0] input: aml_keypad as /devices/meson-remote.12/input/input0
[    3.060499@0] remote: input_register_device completed 
[    3.060598@0] remote: set_remote_mode[74]
[    3.060639@0] remote: remote config major:233
[    3.060938@0] remote: physical address:0x25f06000
[    3.061504@0] gpio-key gpio_keypad.47: gpio_key: 0 name(power) pin()
[    3.061510@0] gpio-key gpio_keypad.47: amlogic_gpio_name_map_num pin 0!::
[    3.061535@0] gpio-key gpio_keypad.47: gpio_key: 0 power(147)
[    3.061581@0] gpio-key gpio_keypad.47: start setup_timer
[    3.061591@0] gpio-key gpio_keypad.47: power key(116) registed.
[    3.061852@0] input: gpio_keypad as /devices/gpio_keypad.47/input/input1
[    3.062084@0] gpio-key gpio_keypad.47: gpio keypad register input device completed.
[    3.062096@0] input input1: gpio keypad major:232
[    3.062590@0] cpuinfo: probe done
[    3.063710@0] input: cec_input as /devices/virtual/input/input2
[    3.064114@0] cectx aocec: aml_cec_probe(): no hdmirx reg resource
[    3.064119@0] cectx aocec: aml_cec_probe(): no hhi reg resource
[    3.064274@0] cectx aocec: aml_cec_probe(): can't find hdmirx
[    3.065517@0] cec: wake up flag:0
[    3.067704@0] aml_codec_T9015 c8832000.t9015: aml_T9015_audio_codec_probe
[    3.070064@0] aml_pcm_dai: pcm mode detection =1
[    3.070553@0] aml_spdif_dai: enterd aml_spdif_play,set_clock:-1,sample_rate=4
[    3.070581@0] aml_spdif_dai: set normal 512 fs /4 fs
[    3.070589@0] aml_audio_hw: IEC958 16bit
[    3.070595@0] hdmitx: audio: aout notify rate 48000
[    3.070598@0] hdmitx: audio: aout notify size 16
[    3.070601@0] hdmitx: audio: aout notify format CT_PCM
[    3.070606@0] hdmtix: set audio
[    3.070623@0] hdmitx tx_aud_src = 0
[    3.070649@0] hdmitx: fs = 3, cd = 4, tmds_clk = 148500
[    3.070652@0] hdmitx aud_n_para = 6144
[    3.070669@0] hdmitx set channel status
[    3.070728@0] hdmitx: audio: Audio Type: PCM
[    3.070731@0] hdmitx: audio: set audio param
[    3.160954@0] input input1: key 116 up
[    3.281171@1] aml_snd_card: headphone detection disable=1
[    3.368134@1] sd: clock 50000000, 4-bit-bus-width
[    3.368134@1]  
[    3.368517@1] aml_snd_m8_card aml_m8_snd.46: T9015-audio-hifi <-> I2S.39 mapping ok
[    3.368980@1] aml_snd_m8_card aml_m8_snd.46: dit-hifi <-> SPDIF.40 mapping ok
[    3.369042@1] aml_pcm: enter aml_pcm_new dai->name: PCM.41 dai->id: 0
[    3.369125@1] aml_snd_m8_card aml_m8_snd.46: pcm2bt-pcm <-> PCM.41 mapping ok
[    3.369156@1] aml_snd_m8_card aml_m8_snd.46: ASoC: no source widget found for LOUTL
[    3.369161@1] aml_snd_m8_card aml_m8_snd.46: ASoC: Failed to add route LOUTL -> direct -> Ext Spk
[    3.369166@1] aml_snd_m8_card aml_m8_snd.46: ASoC: no source widget found for LOUTR
[    3.369170@1] aml_snd_m8_card aml_m8_snd.46: ASoC: Failed to add route LOUTR -> direct -> Ext Spk
[    3.434248@0] mmcblk1: sd:0001 00000 14.8 GiB 
[    3.439902@2]  mmcblk1: p1 p2 p3
[    3.482615@2] aml_snd_card: audio use jtag pinmux as i2s output, read val =0
[    3.494229@2] TCP: cubic registered
[    3.497573@2] NET: Registered protocol family 10
[    3.502198@2] NET: Registered protocol family 17
[    3.506128@2] Key type dns_resolver registered
[    3.512163@2] Registering SWP/SWPB emulation handler
[    3.516488@2] regulator-dummy: disabling
[    4.221198@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    4.221253@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[    4.229355@3] xhci-hcd xhci-hcd.0.auto: irq 62, io mem 0xc9000000
[    4.235267@3] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    4.241950@3] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.249260@3] usb usb1: Product: xHCI Host Controller
[    4.254272@3] usb usb1: Manufacturer: Linux 3.14.29 xhci-hcd
[    4.259868@3] usb usb1: SerialNumber: xhci-hcd.0.auto
[    4.265619@0] hub 1-0:1.0: USB hub found
[    4.268777@0] hub 1-0:1.0: 2 ports detected
[    4.273186@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    4.278507@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    4.286423@0] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    4.293173@0] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.300517@0] usb usb2: Product: xHCI Host Controller
[    4.305507@0] usb usb2: Manufacturer: Linux 3.14.29 xhci-hcd
[    4.311110@0] usb usb2: SerialNumber: xhci-hcd.0.auto
[    4.316744@0] hub 2-0:1.0: USB hub found
[    4.320007@0] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[    4.327830@3] console [netcon0] enabled
[    4.331051@3] netconsole: network logging started
[    4.335714@3] aml_vrtc rtc.31: setting system clock to 2015-01-01 00:00:07 UTC (1420070407)
[    4.344862@3] cpufreq-scpi cpufreq-meson.7: enter  cpufreq
[    4.349426@3] cpufreq-scpi cpufreq-meson.7: probe  cpufreq okay
[    4.356008@3] gxbb_pm: enter meson_pm_probe!
[    4.359520@3] gxbb_pm: meson_pm_probe done
[    4.364512@3] cpucore_cooling_register, max_cpu_core_num:4
[    4.384257@3] aml_istbt_dev_ready NULL
[    4.384325@3] ALSA device list:
[    4.385498@3]   #0: AML-M8AUDIO
[    4.389148@3] Freeing unused kernel memory: 888K (ffffffc001a8c000 - ffffffc001b6a000)
[    4.429566@0] fb: Frame buffer memory assigned at
[    4.429585@0] fb:  0, phy: 0x000000003e000000, vir:0xffffff8001f00000, size=24576K
[    4.429585@0] 
[    4.429595@0] fb: ---------------clear fb0 memory ffffff8001f00000
[    4.444491@0] fb: osd[0] canvas.idx =0x40
[    4.444500@0] fb: osd[0] canvas.addr=0x3e000000
[    4.444503@0] fb: osd[0] canvas.width=7680
[    4.444506@0] fb: osd[0] canvas.height=3240
[    4.444510@0] fb: osd[0] frame.width=1920
[    4.444514@0] fb: osd[0] frame.height=1080
[    4.448785@0] fb: osd[0] canvas.idx =0x40
[    4.448786@0] fb: osd[0] canvas.addr=0x3e000000
[    4.448788@0] fb: osd[0] canvas.width=7680
[    4.448790@0] fb: osd[0] canvas.height=2160
[    4.448791@0] fb: osd[0] frame.width=1920
[    4.448792@0] fb: osd[0] frame.height=1080
[    4.467205@0] fb: Frame buffer memory assigned at
[    4.467223@0] fb:  1, phy: 0x000000003f800000, vir:0xffffff8003780000, size=1024K
[    4.467223@0] 
[    4.467232@0] fb: fb1 open, logo index:1
[    4.498890@2] vfm_map_store:rm default
[    4.498890@2] 
[    4.498946@2] vfm_map_store:add default decoder ppmgr deinterlace amvideo
[    4.498946@2] 
[    4.499013@2] fb: osd[0] enable: 1 (platform_init)
[    4.548447@2] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: d0078000, ctrl: 0
[    4.548465@2] dwc_otg_driver_probe host only, not probe usb_otg!!!
[    4.565431@2] Console: switching to colour frame buffer device 240x67
[    6.327102@1] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities
[    6.327730@1] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities
[    6.392905@2] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
[    6.763489@1] systemd[1]: System time before build time, advancing clock.
[    6.771372@1] random: systemd urandom read with 74 bits of entropy available
[    6.779298@1] systemd[1]: systemd 232 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[    6.779702@1] systemd[1]: Detected architecture arm64.
[    6.779922@1] systemd[1]: Set hostname to <LibreELEC>.
[    6.875517@1] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    6.876033@1] systemd[1]: Listening on Journal Socket.
[    6.876260@1] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.876428@1] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    6.876496@1] systemd[1]: Reached target Paths.
[    6.876631@1] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.876825@1] systemd[1]: Listening on udev Control Socket.
[    6.877534@1] systemd[1]: Created slice User and Session Slice.
[    6.878015@1] systemd[1]: Listening on RPCbind Server Activation Socket.
[    6.878131@1] systemd[1]: Reached target RPC Port Mapper.
[    6.878503@1] systemd[1]: Created slice System Slice.
[    6.878644@1] systemd[1]: Reached target Slices.
[    6.880365@1] systemd[1]: Mounting Debug File System...
[    6.882411@1] systemd[1]: Starting Remount Root and Kernel File Systems...
[    6.884643@1] systemd[1]: Mounting POSIX Message Queue File System...
[    6.886775@1] systemd[1]: Starting Mounting swapfile...
[    6.897022@0] systemd[1]: Starting Load Kernel Modules...
[    6.910393@2] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    6.915637@2] systemd[1]: Starting Setup machine-id...
[    6.918116@2] systemd[1]: Starting Show Version...
[    6.920489@2] systemd[1]: Starting Debug Shell on /dev/ttyS0...
[    6.920504@1] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
[    6.920866@2] systemd[1]: Listening on udev Kernel Socket.
[    6.922949@2] systemd[1]: Mounting Variable Directory...
[    6.928486@2] systemd[1]: Mounted Debug File System.
[    6.928662@2] systemd[1]: Mounted POSIX Message Queue File System.
[    6.929855@2] systemd[1]: Started Remount Root and Kernel File Systems.
[    6.934636@2] systemd[1]: Started Debug Shell on /dev/ttyS0.
[    6.934728@0] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
[    6.935579@2] systemd[1]: Mounted Variable Directory.
[    6.942712@2] systemd[1]: Starting RPC Bind...
[    6.945248@2] systemd[1]: Starting Setup Timezone data...
[    6.949797@2] systemd[1]: Starting udev Coldplug all Devices...
[    6.959011@2] systemd[1]: Started Show Version.
[    6.960040@2] systemd[1]: Started Setup Timezone data.
[    6.968023@2] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    6.969660@2] systemd[1]: Started Setup machine-id.
[    6.972616@2] systemd[1]: Starting Journal Service...
[    6.974789@2] systemd[1]: Starting Create Static Device Nodes in /dev...
[    7.060492@1] systemd[1]: Started Create Static Device Nodes in /dev.
[    7.061289@1] systemd[1]: Started Journal Service.
[    7.101726@1] systemd-journald[1762]: Received request to flush runtime journal from PID 1
[    7.108643@3] media: Linux media interface: v0.10
[    7.125591@3] WARNING: You are using an experimental version of the media stack.
[    7.125591@3] 	As the driver is backported to an older kernel, it doesn't offer
[    7.125591@3] 	enough quality for its usage in production.
[    7.125591@3] 	Use it with care.
[    7.125591@3] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[    7.125591@3] 	a02ff2e02bee64e9955dbfd8811874c3f3880f58 cx231xx: Fix TBS MAC reading.
[    7.154860@3] DVB: aml dvb init
[    7.184022@3] Linux video capture interface: v2.00
[    7.184035@3] WARNING: You are using an experimental version of the media stack.
[    7.184035@3] 	As the driver is backported to an older kernel, it doesn't offer
[    7.184035@3] 	enough quality for its usage in production.
[    7.184035@3] 	Use it with care.
[    7.184035@3] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[    7.184035@3] 	a02ff2e02bee64e9955dbfd8811874c3f3880f58 cx231xx: Fix TBS MAC reading.
[    7.207786@3] amlvid:err: amlvideo_init called
[    7.207798@3] amlvid:err: amlvideo_create_instance called
[    7.207805@3] amlvid:err: v4l2_dev.name=:amlvideo-000
[    7.208147@3] amlvideo-000: V4L2 device registered as video10
[    7.224521@3] mali-utgard d00c0000.mali: set min pp to default 1
[    7.224537@3] mali-utgard d00c0000.mali: set min clk default to 0
[    7.224647@3] mali-utgard d00c0000.mali: max clk set 5
[    7.224653@3] mali-utgard d00c0000.mali: turbo clk set to 6
[    7.227552@3] gpu cooling register okay with err=0
[    7.231208@3] gpu core cooling register okay with err=0
[    7.245357@3] Mali: Mali device driver loaded
[    7.274992@3] Triggered SDIO WiFi power on and bus rescan.
[    7.275027@3] aml_wifi wifi.32: [extern_wifi_set_enable] WIFI  Disable! 240
[    7.554296@0] random: nonblocking pool is initialized
[    7.581005@3] aml_wifi wifi.32: [extern_wifi_set_enable] WIFI  Enable! 240
[    7.914738@3] sdio: new high speed SDIO card at address 0001
[    7.914752@3] sdio: clock 50000000, 4-bit-bus-width
[    7.914752@3]  
[    7.915252@3] [sdio_reinit] finish
[    8.042865@3] Console: switching to colour dummy device 80x25
[    8.186982@0] ------------[ cut here ]------------
[    8.187025@0] WARNING: CPU: 0 PID: 2442 at /home/afl1/LibreELEC.tv/build.LibreELEC-S905.arm-8.0-devel/media_build-2017-01-22/v4l/v4l2-ioctl.c:999 v4l_querycap+0x98/0xd8 [videodev]()
[    8.187032@0] Bad caps for driver amlvideo, 5200001 0
[    8.187036@0] Modules linked in: wifi_dummy mali(O) amlvideodri(O) videobuf_res(O) videobuf_core(O) videodev(O) aml_fe(O) aml(O) dvb_core(O) media(O) fbcon bitblit softcursor font dwc_otg
[    8.187069@0] CPU: 0 PID: 2442 Comm: v4l_id Tainted: G           O 3.14.29 #1
[    8.187074@0] Call trace:
[    8.187087@0] [<ffffffc001087a58>] dump_backtrace+0x0/0x128
[    8.187093@0] [<ffffffc001087ba0>] show_stack+0x20/0x30
[    8.187101@0] [<ffffffc0017b4190>] dump_stack+0x78/0x94
[    8.187110@0] [<ffffffc0010943e8>] warn_slowpath_common+0x90/0xc0
[    8.187117@0] [<ffffffc001094478>] warn_slowpath_fmt+0x60/0x78
[    8.187129@0] [<ffffffbffc0b18d4>] v4l_querycap+0x94/0xd8 [videodev]
[    8.187137@0] [<ffffffbffc0b3540>] __video_do_ioctl+0x248/0x2b8 [videodev]
[    8.187147@0] [<ffffffbffc0b3164>] video_usercopy+0x2b4/0x3f8 [videodev]
[    8.187155@0] [<ffffffbffc0b32e0>] video_ioctl2+0x38/0x50 [videodev]
[    8.187163@0] [<ffffffbffc0ad934>] v4l2_ioctl+0x11c/0x128 [videodev]
[    8.187174@0] [<ffffffbffc0c1f7c>] do_video_ioctl+0x15fc/0x1b80 [videodev]
[    8.187184@0] [<ffffffbffc0c25a0>] v4l2_compat_ioctl32+0xa0/0xa8 [videodev]
[    8.187193@0] [<ffffffc0011efc74>] compat_sys_ioctl+0xa4/0x1b10
[    8.187197@0] ---[ end trace 706f7f1596e30765 ]---
[    8.190147@1] remote: cur_mode = 0
[    8.190166@1] remote: set_remote_mode[74]
[    8.568147@1] ------------[ cut here ]------------
[    8.568188@1] WARNING: CPU: 1 PID: 2496 at /home/afl1/LibreELEC.tv/build.LibreELEC-S905.arm-8.0-devel/media_build-2017-01-22/v4l/v4l2-ioctl.c:999 v4l_querycap+0x98/0xd8 [videodev]()
[    8.568194@1] Bad caps for driver amlvideo, 5200001 0
[    8.568197@1] Modules linked in: wifi_dummy mali(O) amlvideodri(O) videobuf_res(O) videobuf_core(O) videodev(O) aml_fe(O) aml(O) dvb_core(O) media(O) fbcon bitblit softcursor font dwc_otg
[    8.568227@1] CPU: 1 PID: 2496 Comm: v4l_id Tainted: G        W  O 3.14.29 #1
[    8.568237@1] Call trace:
[    8.568250@1] [<ffffffc001087a58>] dump_backtrace+0x0/0x128
[    8.568256@1] [<ffffffc001087ba0>] show_stack+0x20/0x30
[    8.568264@1] [<ffffffc0017b4190>] dump_stack+0x78/0x94
[    8.568272@1] [<ffffffc0010943e8>] warn_slowpath_common+0x90/0xc0
[    8.568279@1] [<ffffffc001094478>] warn_slowpath_fmt+0x60/0x78
[    8.568288@1] [<ffffffbffc0b18d4>] v4l_querycap+0x94/0xd8 [videodev]
[    8.568297@1] [<ffffffbffc0b3540>] __video_do_ioctl+0x248/0x2b8 [videodev]
[    8.568306@1] [<ffffffbffc0b3164>] video_usercopy+0x2b4/0x3f8 [videodev]
[    8.568315@1] [<ffffffbffc0b32e0>] video_ioctl2+0x38/0x50 [videodev]
[    8.568322@1] [<ffffffbffc0ad934>] v4l2_ioctl+0x11c/0x128 [videodev]
[    8.568333@1] [<ffffffbffc0c1f7c>] do_video_ioctl+0x15fc/0x1b80 [videodev]
[    8.568343@1] [<ffffffbffc0c25a0>] v4l2_compat_ioctl32+0xa0/0xa8 [videodev]
[    8.568351@1] [<ffffffc0011efc74>] compat_sys_ioctl+0xa4/0x1b10
[    8.568355@1] ---[ end trace 706f7f1596e30766 ]---
[    8.894640@2] FAT-fs (mmcblk1p3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    9.205986@1] 8021q: 802.1Q VLAN Support v1.8
[   40.219006@3] aml_spdif_dai: enterd aml_spdif_play,set_clock:4,sample_rate=4
[   40.219078@3] aml_spdif_dai: share the same clock
[   40.219089@3] aml_audio_hw: IEC958 16bit
[   40.219096@3] hdmitx: audio: aout notify rate 48000
[   40.219100@3] hdmitx: audio: aout notify size 16
[   40.219104@3] hdmitx: audio: no update
[   40.246653@1] aml_spdif_dai: share the same clock
[   40.246680@1] aml_audio_hw: IEC958 16bit
[   40.246686@1] hdmitx: audio: aout notify rate 48000
[   40.246691@1] hdmitx: audio: aout notify size 16
[   40.246695@1] hdmitx: audio: no update
[   40.248920@1] aml_spdif_dai: share the same clock
[   40.248943@1] aml_audio_hw: IEC958 16bit
[   40.248950@1] hdmitx: audio: aout notify rate 48000
[   40.248953@1] hdmitx: audio: aout notify size 16
[   40.248957@1] hdmitx: audio: no update
[   40.250866@1] aml_spdif_dai: share the same clock
[   40.250890@1] aml_audio_hw: IEC958 16bit
[   40.250898@1] hdmitx: audio: aout notify rate 48000
[   40.250975@1] hdmitx: audio: aout notify size 16
[   40.250982@1] hdmitx: audio: no update
[   40.252530@1] aml_spdif_dai: share the same clock
[   40.252551@1] aml_audio_hw: IEC958 16bit
[   40.252559@1] hdmitx: audio: aout notify rate 48000
[   40.252562@1] hdmitx: audio: aout notify size 16
[   40.252566@1] hdmitx: audio: no update
[   40.675476@2] audio_dsp: buf=0
[   40.675493@2] audio_dsp: IEC958_mode_raw=0
[   40.675523@2] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
[   40.675527@2] audio_dsp: last mode 0,now 0
[   40.682360@2] aml_spdif_dai: share the same clock
[   40.682383@2] aml_audio_hw: IEC958 16bit
[   40.682389@2] hdmitx: audio: aout notify rate 48000
[   40.682393@2] hdmitx: audio: aout notify size 16
[   40.682397@2] hdmitx: audio: no update
[   40.684633@2] aml_spdif_dai: share the same clock
[   40.684653@2] aml_audio_hw: IEC958 16bit
[   40.684661@2] hdmitx: audio: aout notify rate 48000
[   40.684665@2] hdmitx: audio: aout notify size 16
[   40.684669@2] hdmitx: audio: no update
[   40.686748@2] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, same source mode(1)
[   40.686762@2] aml_spdif_dai: share the same clock
[   40.686769@2] aml_spdif_dai: iec958 mode PCM32
[   40.686779@2] aml_audio_hw: IEC958 PCM32
[   40.686785@2] hdmitx: audio: aout notify rate 44100
[   40.686789@2] hdmitx: audio: aout notify size 32
[   40.686795@2] hdmtix: set audio
[   40.686810@2] hdmitx tx_aud_src = 0
[   40.686838@2] hdmitx: fs = 2, cd = 4, tmds_clk = 148500
[   40.686842@2] hdmitx aud_n_para = 6272
[   40.686862@2] hdmitx set channel status
[   40.686923@2] hdmitx: audio: Audio Type: PCM
[   40.686927@2] hdmitx: audio: set audio param
[   40.686937@2] aml_snd_m8_card aml_m8_snd.46: i2s/958 same source
[   40.687352@1] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, same source mode(1)
[   40.687364@1] aml_spdif_dai: share the same clock
[   40.687371@1] aml_spdif_dai: iec958 mode PCM32
[   40.687379@1] aml_audio_hw: IEC958 PCM32
[   40.687386@1] hdmitx: audio: aout notify rate 44100
[   40.687390@1] hdmitx: audio: aout notify size 32
[   40.687394@1] hdmitx: audio: no update
[   40.687404@1] aml_snd_m8_card aml_m8_snd.46: i2s/958 same source
[   40.693127@1] aml_snd_m8_card aml_m8_snd.46: I2S playback enable
[   40.693150@1] aml_snd_m8_card aml_m8_snd.46: IEC958 playback enable
[   40.850523@1] fb: osd[0] enable: 1 (kodi.bin)
[   58.637849@0] remote: press ircode = 0x16,
[   58.637866@0] remote: scancode = 0x0067,maptable = 0,code:0xe916fe01
[   58.637874@0] 
[   58.990962@2] remote: release ircode = 0x16,
[   58.990982@2] remote: scancode = 0x0067, maptable = 0,code:0x00000000
[   58.990991@2] 
[   59.143180@0] remote: press ircode = 0x50,
[   59.143198@0] remote: scancode = 0x006a,maptable = 0,code:0xaf50fe01
[   59.143205@0] 
[   59.500948@2] remote: release ircode = 0x50,
[   59.500968@2] remote: scancode = 0x006a, maptable = 0,code:0x00000000
[   59.500975@2] 
[   59.550738@0] remote: press ircode = 0x13,
[   59.550756@0] remote: scancode = 0x001c,maptable = 0,code:0xec13fe01
[   59.550763@0] 
[   59.710952@2] remote: release ircode = 0x13,
[   59.710973@2] remote: scancode = 0x001c, maptable = 0,code:0x00000000
[   59.710980@2] 
[   60.610305@0] remote: press ircode = 0x1a,
[   60.610308@0] remote: scancode = 0x006c,maptable = 0,code:0xe51afe01
[   60.610308@0] 
[   60.770986@0] remote: release ircode = 0x1a,
[   60.771027@0] remote: scancode = 0x006c, maptable = 0,code:0x00000000
[   60.771035@0] 
[   60.822965@0] remote: press ircode = 0x1a,
[   60.822991@0] remote: scancode = 0x006c,maptable = 0,code:0xe51afe01
[   60.822999@0] 
[   60.990984@0] remote: release ircode = 0x1a,
[   60.991016@0] remote: scancode = 0x006c, maptable = 0,code:0x00000000
[   60.991024@0] 
[   61.035761@0] remote: press ircode = 0x1a,
[   61.035789@0] remote: scancode = 0x006c,maptable = 0,code:0xe51afe01
[   61.035798@0] 
[   61.200980@0] remote: release ircode = 0x1a,
[   61.201020@0] remote: scancode = 0x006c, maptable = 0,code:0x00000000
[   61.201028@0] 
[   61.703637@0] remote: press ircode = 0x16,
[   61.703655@0] remote: scancode = 0x0067,maptable = 0,code:0xe916fe01
[   61.703662@0] 
[   62.060961@3] remote: release ircode = 0x16,
[   62.060964@3] remote: scancode = 0x0067, maptable = 0,code:0x00000000
[   62.060964@3] 
[   62.155818@0] remote: press ircode = 0x13,
[   62.155837@0] remote: scancode = 0x001c,maptable = 0,code:0xec13fe01
[   62.155844@0] 
[   62.320964@0] remote: release ircode = 0x13,
[   62.320994@0] remote: scancode = 0x001c, maptable = 0,code:0x00000000
[   62.321001@0] 
[   63.679444@0] remote: press ircode = 0x1a,
[   63.679462@0] remote: scancode = 0x006c,maptable = 0,code:0xe51afe01
[   63.679469@0] 
[   63.840964@0] remote: release ircode = 0x1a,
[   63.841003@0] remote: scancode = 0x006c, maptable = 0,code:0x00000000
[   63.841012@0] 
[   64.926303@0] remote: press ircode = 0x1a,
[   64.926321@0] remote: scancode = 0x006c,maptable = 0,code:0xe51afe01
[   64.926338@0] 
[   65.280966@2] remote: release ircode = 0x1a,
[   65.280969@2] remote: scancode = 0x006c, maptable = 0,code:0x00000000
[   65.280969@2] 
[   65.824153@0] remote: press ircode = 0x16,
[   65.824171@0] remote: scancode = 0x0067,maptable = 0,code:0xe916fe01
[   65.824179@0] 
[   66.180967@3] remote: release ircode = 0x16,
[   66.180983@3] remote: scancode = 0x0067, maptable = 0,code:0x00000000
[   66.180990@3] 
[   66.276348@0] remote: press ircode = 0x16,
[   66.276368@0] remote: scancode = 0x0067,maptable = 0,code:0xe916fe01
[   66.276376@0] 
[   66.630969@1] remote: release ircode = 0x16,
[   66.630972@1] remote: scancode = 0x0067, maptable = 0,code:0x00000000
[   66.630972@1] 
[   69.563343@0] remote: press ircode = 0x19,
[   69.563357@0] remote: scancode = 0x000e,maptable = 0,code:0xe619fe01
[   69.563364@0] 
[   69.920976@0] remote: release ircode = 0x19,
[   69.921015@0] remote: scancode = 0x000e, maptable = 0,code:0x00000000
[   69.921022@0] 
[   70.648484@0] remote: press ircode = 0x19,
[   70.648503@0] remote: scancode = 0x000e,maptable = 0,code:0xe619fe01
[   70.648509@0] 
[   71.000954@0] remote: release ircode = 0x19,
[   71.000977@0] remote: scancode = 0x000e, maptable = 0,code:0x00000000
[   71.000984@0] 
[   78.151113@1] libphy: stmmac-0:08 - Link is Up - 100/Full
[   78.151142@1] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  100.878260@0] aml_snd_m8_card aml_m8_snd.46: I2S playback disable
[  100.878315@0] aml_snd_m8_card aml_m8_snd.46: IEC958 playback disable
[  100.878449@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, same source mode(1)
[  100.878470@0] aml_spdif_dai: share the same clock
[  100.878492@0] aml_spdif_dai: iec958 mode PCM32
[  100.878520@0] aml_audio_hw: IEC958 PCM32
[  100.878547@0] hdmitx: audio: aout notify rate 44100
[  100.878566@0] hdmitx: audio: aout notify size 32
[  100.878584@0] hdmitx: audio: no update
[  100.878613@0] aml_snd_m8_card aml_m8_snd.46: i2s/958 same source
[  110.879636@0] aml_spdif_dai: enterd aml_spdif_play,set_clock:5,sample_rate=4
[  110.879682@0] aml_spdif_dai: share the same clock
[  110.879713@0] aml_audio_hw: IEC958 16bit
[  110.879738@0] hdmitx: audio: aout notify rate 48000
[  110.879758@0] hdmitx: audio: aout notify size 16
[  110.879779@0] hdmtix: set audio
[  110.879826@0] hdmitx tx_aud_src = 0
[  110.879916@0] hdmitx: fs = 3, cd = 4, tmds_clk = 148500
[  110.879936@0] hdmitx aud_n_para = 6144
[  110.880000@0] hdmitx set channel status
[  110.880171@0] hdmitx: audio: Audio Type: PCM
[  110.880189@0] hdmitx: audio: set audio param
