=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2023.03.21 22:03:16 =~=~=~=~=~=~=~=~=~=~=~= dmesg [ 0.000000] Booting Linux on physical CPU 0xf00 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.194 (jenkins@Summit) (gcc version 8.3.0 (GCC) ) #1 SMP PREEMPT Mon Apr 27 15:37:13 CEST 2020 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: RK3228a MXQ 4K Pro [ 0.000000] earlycon: Early serial console at MMIO32 0x11030000 (options '') [ 0.000000] bootconsole [uart0] enabled [ 0.000000] cma: Reserved 16 MiB at 0x9f000000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 258560 [ 0.000000] free_area_init_node: node 0, pgdat c12a5a00, node_mem_map ef6fa000 [ 0.000000] Normal zone: 1728 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 193024 pages, LIFO batch:31 [ 0.000000] HighMem zone: 65536 pages, LIFO batch:15 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv65535.65535 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] PERCPU: Embedded 13 pages/cpu @ef6a0000 s24472 r8192 d20584 u53248 [ 0.000000] pcpu-alloc: s24472 r8192 d20584 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256832 [ 0.000000] Kernel command line: root=/dev/ram0 rdinit=/init usbcore.autosuspend=-1 boot=UUID=2704-3205 disk=UUID=c28da4c5-fe1c-410a-8f8c-95ca4729229c quiet console=uart8250,mmio32,0x11030000 console=tty0 video=HDMI-A-1:1920x1080 earlycon=uart8250,mmio32,0x11030000 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 986908K/1034240K available (10240K kernel code, 805K rwdata, 2716K rodata, 3072K init, 1436K bss, 30948K reserved, 16384K cma-reserved, 245760K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0b00000 (11232 kB) [ 0.000000] .init : 0xc0f00000 - 0xc1200000 (3072 kB) [ 0.000000] .data : 0xc1200000 - 0xc12c9678 ( 806 kB) [ 0.000000] .bss : 0xc12cb000 - 0xc14321a8 (1437 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000009] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000025] Switching to timer-based delay loop, resolution 41ns [ 0.001054] Console: colour dummy device 80x30 [ 0.001078] console [tty0] enabled [ 0.001090] bootconsole [uart0] disabled [ 0.001138] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000) [ 0.001159] pid_max: default: 32768 minimum: 301 [ 0.001287] Security Framework initialized [ 0.001302] Yama: becoming mindful. [ 0.001386] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001404] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002532] Initializing cgroup subsys io [ 0.002576] Initializing cgroup subsys memory [ 0.002629] Initializing cgroup subsys devices [ 0.002655] Initializing cgroup subsys freezer [ 0.002676] Initializing cgroup subsys pids [ 0.002751] CPU: Testing write buffer coherency: ok [ 0.002817] ftrace: allocating 34778 entries in 102 pages [ 0.073236] /cpus/cpu@f00 missing clock-frequency property [ 0.073305] /cpus/cpu@f01 missing clock-frequency property [ 0.073339] /cpus/cpu@f02 missing clock-frequency property [ 0.073376] /cpus/cpu@f03 missing clock-frequency property [ 0.073404] CPU0: update cpu_capacity 430 [ 0.073417] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00 [ 0.073530] Setting up static identity map for 0x60100000 - 0x60100058 [ 0.106813] CPU1: update cpu_capacity 430 [ 0.106825] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01 [ 0.116896] CPU2: update cpu_capacity 430 [ 0.116906] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02 [ 0.126999] CPU3: update cpu_capacity 430 [ 0.127009] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03 [ 0.127169] Brought up 4 CPUs [ 0.127215] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 0.127225] CPU: All CPU(s) started in SVC mode. [ 0.129364] devtmpfs: initialized [ 0.146073] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.146861] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.146978] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.148799] pinctrl core: initialized pinctrl subsystem [ 0.149411] regulator-dummy: no parameters [ 0.150943] NET: Registered protocol family 16 [ 0.155008] DMA: preallocated 2048 KiB pool for atomic coherent allocations [ 0.167225] cpuidle: using governor ladder [ 0.180586] cpuidle: using governor menu [ 0.199480] gpiochip_add_data: registered GPIOs 0 to 31 on device: gpio0 [ 0.199650] gpiochip_add_data: registered GPIOs 32 to 63 on device: gpio1 [ 0.199817] gpiochip_add_data: registered GPIOs 64 to 95 on device: gpio2 [ 0.199970] gpiochip_add_data: registered GPIOs 96 to 127 on device: gpio3 [ 0.209039] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.209061] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.264697] rockchip-pm rockchip-suspend: not set wakeup-config [ 0.264814] rockchip-pm rockchip-suspend: not set pwm-regulator-config [ 0.265307] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulators/regulator@0[0]' [ 0.265365] vccio_1v8: 1800 mV [ 0.265800] reg-fixed-voltage regulators:regulator@0: vccio_1v8 supplying 1800000uV [ 0.265937] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulators/regulator@1[0]' [ 0.265974] vccio_3v3: 3300 mV [ 0.266324] reg-fixed-voltage regulators:regulator@1: vccio_3v3 supplying 3300000uV [ 0.266697] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc-host-regulator[0]' - status (0) [ 0.266805] vcc_host: no parameters [ 0.267189] reg-fixed-voltage vcc-host-regulator: vcc_host supplying 0uV [ 0.267501] of_get_named_gpiod_flags: parsed 'gpio' property of node '/otg-vbus-regulator[0]' - status (0) [ 0.267588] vcc_otg_vbus: 5000 mV [ 0.267996] reg-fixed-voltage otg-vbus-regulator: vcc_otg_vbus supplying 5000000uV [ 0.268208] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc-phy-regulator[0]' [ 0.268248] vcc_phy: 1800 mV [ 0.268597] reg-fixed-voltage vcc-phy-regulator: vcc_phy supplying 1800000uV [ 0.269508] iommu: Adding device 20020000.vpu-service to group 0 [ 0.269623] iommu: Adding device 20030000.rkvdec to group 1 [ 0.269720] iommu: Adding device 20050000.vop to group 2 [ 0.269813] iommu: Adding device 20070000.iep to group 3 [ 0.270501] rk_iommu 20020800.iommu: can't get sclk [ 0.271168] rk_iommu 20030480.iommu: can't get sclk [ 0.271464] rk_iommu 20053f00.iommu: can't get sclk [ 0.271716] rk_iommu 20070800.iommu: can't get aclk [ 0.271736] rk_iommu 20070800.iommu: can't get hclk [ 0.271752] rk_iommu 20070800.iommu: can't get sclk [ 0.272680] SCSI subsystem initialized [ 0.273125] usbcore: registered new interface driver usbfs [ 0.273229] usbcore: registered new interface driver hub [ 0.273436] usbcore: registered new device driver usb [ 0.275530] pps_core: LinuxPPS API ver. 1 registered [ 0.275545] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.275588] PTP clock support registered [ 0.277897] Advanced Linux Sound Architecture Driver Initialized. [ 0.279130] Bluetooth: Core ver 2.21 [ 0.279213] NET: Registered protocol family 31 [ 0.279225] Bluetooth: HCI device and connection manager initialized [ 0.279250] Bluetooth: HCI socket layer initialized [ 0.279268] Bluetooth: L2CAP socket layer initialized [ 0.279329] Bluetooth: SCO socket layer initialized [ 0.279931] cfg80211: World regulatory domain updated: [ 0.279948] cfg80211: DFS Master region: unset [ 0.279959] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 0.279974] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 0.279989] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 0.280002] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 0.280016] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 0.280030] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 0.280043] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 0.280056] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 0.280068] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 0.282150] clocksource: Switched to clocksource arch_sys_counter [ 0.370551] FS-Cache: Loaded [ 0.390820] NET: Registered protocol family 2 [ 0.391806] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.391932] TCP bind hash table entries: 8192 (order: 5, 163840 bytes) [ 0.392407] TCP: Hash tables configured (established 8192 bind 8192) [ 0.392576] UDP hash table entries: 512 (order: 2, 24576 bytes) [ 0.392645] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes) [ 0.393056] NET: Registered protocol family 1 [ 0.393844] RPC: Registered named UNIX socket transport module. [ 0.393864] RPC: Registered udp transport module. [ 0.393873] RPC: Registered tcp transport module. [ 0.393883] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.550395] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.574479] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.576119] FS-Cache: Netfs 'nfs' registered for caching [ 0.577374] NFS: Registering the id_resolver key type [ 0.577454] Key type id_resolver registered [ 0.577465] Key type id_legacy registered [ 0.577501] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.578007] FS-Cache: Netfs 'cifs' registered for caching [ 0.581278] [ 0.581278] TEE Core Framework initialization (ver 1:0.1) [ 0.581330] TEE armv7 Driver initialization [ 0.582024] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0" [ 0.582048] TEE core: Alloc the misc device "opteearmtz00" (id=0) [ 0.582634] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=62) [ 0.590757] NET: Registered protocol family 38 [ 0.590818] Key type asymmetric registered [ 0.590840] Asymmetric key parser 'x509' registered [ 0.590984] bounce: pool size: 64 pages [ 0.591358] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.591742] io scheduler noop registered [ 0.591765] io scheduler deadline registered [ 0.592064] io scheduler cfq registered (default) [ 0.593597] phy phy-11000000.syscon:usb2-phy@760.0: Looking up phy-supply from device tree [ 0.593626] phy phy-11000000.syscon:usb2-phy@760.0: Looking up phy-supply property in node /syscon@11000000/usb2-phy@760/otg-port failed [ 0.593838] phy phy-11000000.syscon:usb2-phy@760.0: Looking up vbus-supply from device tree [ 0.594252] phy phy-11000000.syscon:usb2-phy@760.1: Looking up phy-supply from device tree [ 0.595888] phy phy-11000000.syscon:usb2-phy@800.2: Looking up phy-supply from device tree [ 0.595917] phy phy-11000000.syscon:usb2-phy@800.2: Looking up phy-supply property in node /syscon@11000000/usb2-phy@800/otg-port failed [ 0.596110] phy phy-11000000.syscon:usb2-phy@800.2: Looking up vbus-supply from device tree [ 0.596129] phy phy-11000000.syscon:usb2-phy@800.2: Looking up vbus-supply property in node /syscon@11000000/usb2-phy@800/otg-port failed [ 0.596151] phy phy-11000000.syscon:usb2-phy@800.2: Failed to get VBUS supply regulator [ 0.596353] phy phy-11000000.syscon:usb2-phy@800.3: Looking up phy-supply from device tree [ 0.598447] phy phy-12030000.hdmi-phy.4: Looking up phy-supply from device tree [ 0.598476] phy phy-12030000.hdmi-phy.4: Looking up phy-supply property in node /hdmi-phy@12030000 failed [ 0.602595] iep: failed to find iep power down clock source. [ 0.603653] IEP Power ON [ 0.604068] IEP Power OFF [ 0.604250] IEP Driver loaded succesfully [ 0.604603] Module initialized. [ 0.605058] rk-vcodec 20020000.vpu-service: Looking up vcodec-supply from device tree [ 0.605079] rk-vcodec 20020000.vpu-service: Looking up vcodec-supply property in node /vpu-service@20020000 failed [ 0.605110] rk-vcodec 20020000.vpu-service: no regulator for vcodec [ 0.605693] rk-vcodec 20020000.vpu-service: probe device [ 0.606209] rk-vcodec 20020000.vpu-service: drm allocator with mmu enabled [ 0.607905] rk-vcodec 20020000.vpu-service: could not find power_model node [ 0.607958] rk-vcodec 20020000.vpu-service: init success [ 0.608243] rk-vcodec 20030000.rkvdec: Looking up vcodec-supply from device tree [ 0.608340] rk-vcodec 20030000.rkvdec: vcodec regulator not ready, retry [ 0.613751] dma-pl330 110f0000.pdma: Loaded driver for PL330 DMAC-241330 [ 0.613779] dma-pl330 110f0000.pdma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16 [ 0.615401] rockchip-system-monitor rockchip-system-monitor: system monitor probe [ 0.616309] pwm-regulator vdd-arm-regulator: GPIO lookup for consumer enable [ 0.616329] pwm-regulator vdd-arm-regulator: using device tree for GPIO lookup [ 0.616348] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/vdd-arm-regulator[0]' [ 0.616363] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/vdd-arm-regulator[0]' [ 0.616377] pwm-regulator vdd-arm-regulator: using lookup tables for GPIO lookup [ 0.616393] pwm-regulator vdd-arm-regulator: lookup for GPIO enable failed [ 0.616456] pwm-regulator vdd-arm-regulator: Looking up pwm-supply from device tree [ 0.616475] pwm-regulator vdd-arm-regulator: Looking up pwm-supply property in node /vdd-arm-regulator failed [ 0.616584] vdd_arm: 950 <--> 1400 mV at 950 mV [ 0.616982] pwm-regulator vdd-arm-regulator: Looking up pwm-supply from device tree [ 0.617006] pwm-regulator vdd-arm-regulator: Looking up pwm-supply property in node /vdd-arm-regulator failed [ 0.617105] pwm-regulator vdd-arm-regulator: Looking up pwm-supply from device tree [ 0.617123] pwm-regulator vdd-arm-regulator: Looking up pwm-supply property in node /vdd-arm-regulator failed [ 0.617292] pwm-regulator vdd-log-regulator: GPIO lookup for consumer enable [ 0.617308] pwm-regulator vdd-log-regulator: using device tree for GPIO lookup [ 0.617325] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/vdd-log-regulator[0]' [ 0.617339] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/vdd-log-regulator[0]' [ 0.617353] pwm-regulator vdd-log-regulator: using lookup tables for GPIO lookup [ 0.617367] pwm-regulator vdd-log-regulator: lookup for GPIO enable failed [ 0.617409] pwm-regulator vdd-log-regulator: Looking up pwm-supply from device tree [ 0.617427] pwm-regulator vdd-log-regulator: Looking up pwm-supply property in node /vdd-log-regulator failed [ 0.617498] vdd_log: 1000 <--> 1300 mV at 1000 mV [ 0.617872] pwm-regulator vdd-log-regulator: Looking up pwm-supply from device tree [ 0.617893] pwm-regulator vdd-log-regulator: Looking up pwm-supply property in node /vdd-log-regulator failed [ 0.617993] pwm-regulator vdd-arm-regulator: Looking up pwm-supply from device tree [ 0.618011] pwm-regulator vdd-arm-regulator: Looking up pwm-supply property in node /vdd-arm-regulator failed [ 0.618032] pwm-regulator vdd-log-regulator: Looking up pwm-supply from device tree [ 0.618048] pwm-regulator vdd-log-regulator: Looking up pwm-supply property in node /vdd-log-regulator failed [ 0.619084] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled [ 0.620174] 11030000.serial: ttyS2 at MMIO 0x11030000 (irq = 31, base_baud = 1500000) is a 16550A [ 0.624339] console [ttyS2] enabled [ 0.627028] [drm] Initialized drm 1.1.0 20060810 [ 0.629736] [drm] Rockchip DRM driver version: v1.0.1 [ 0.630387] rockchip-drm display-subsystem: devfreq is not set [ 0.631269] rockchip-drm display-subsystem: bound 20050000.vop (ops 0xc0b74678) [ 0.631727] i2c i2c-0: of_i2c: modalias failure on /hdmi@200a0000/ports [ 0.632566] dwhdmi-rockchip 200a0000.hdmi: registered DesignWare HDMI I2C bus driver [ 0.632736] dwhdmi-rockchip 200a0000.hdmi: Detected HDMI TX controller v2.01a with HDCP (inno_dw_hdmi_phy) [ 0.634353] rockchip-drm display-subsystem: bound 200a0000.hdmi (ops 0xc0b6ce60) [ 0.634642] rockchip-drm display-subsystem: bound 20053e00.tve (ops 0xc0b746ac) [ 0.634664] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 0.634673] [drm] No driver support for vblank timestamp query. [ 0.634827] rockchip-drm display-subsystem: failed to parse display resources [ 1.050386] [drm] kms: can't enable cloning when we probably wanted to. [ 1.258435] rockchip-vop 20050000.vop: [drm:vop_crtc_enable] Update mode to 1920x1080p50, type: 11 [ 1.259367] dwhdmi-rockchip 200a0000.hdmi: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 [ 1.259376] dwhdmi-rockchip 200a0000.hdmi: colorspace: RGB [ 1.259385] dwhdmi-rockchip 200a0000.hdmi: scan mode: Underscan [ 1.259393] dwhdmi-rockchip 200a0000.hdmi: colorimetry: No Data [ 1.259400] dwhdmi-rockchip 200a0000.hdmi: picture aspect: 16:9 [ 1.259409] dwhdmi-rockchip 200a0000.hdmi: active aspect: Same as Picture [ 1.259416] dwhdmi-rockchip 200a0000.hdmi: itc: IT Content [ 1.259424] dwhdmi-rockchip 200a0000.hdmi: extended colorimetry: xvYCC 601 [ 1.259432] dwhdmi-rockchip 200a0000.hdmi: quantization range: Full [ 1.259440] dwhdmi-rockchip 200a0000.hdmi: nups: Unknown Non-uniform Scaling [ 1.259447] dwhdmi-rockchip 200a0000.hdmi: video code: 31 [ 1.259455] dwhdmi-rockchip 200a0000.hdmi: ycc quantization range: Full [ 1.259463] dwhdmi-rockchip 200a0000.hdmi: hdmi content type: Graphics [ 1.259471] dwhdmi-rockchip 200a0000.hdmi: pixel repeat: 0 [ 1.259480] dwhdmi-rockchip 200a0000.hdmi: bar top 0, bottom 0, left 0, right 0 [ 1.350964] Console: switching to colour frame buffer device 240x67 [ 1.411076] rockchip-drm display-subsystem: fb0: frame buffer device [ 1.461840] brd: module loaded [ 1.479824] loop: module loaded [ 1.480490] lkdtm: No crash points registered, enable through debugfs [ 1.480802] Loading iSCSI transport class v2.0-870. [ 1.481890] iscsi: registered transport (tcp) [ 1.484977] rk_gmac-dwmac 30200000.ethernet: Looking up phy-supply from device tree [ 1.485231] rk_gmac-dwmac 30200000.ethernet: clock input or output? (output). [ 1.485253] rk_gmac-dwmac 30200000.ethernet: Can not read property: tx_delay. [ 1.486379] rk_gmac-dwmac 30200000.ethernet: set tx_delay to 0x30 [ 1.487190] rk_gmac-dwmac 30200000.ethernet: Can not read property: rx_delay. [ 1.488126] rk_gmac-dwmac 30200000.ethernet: set rx_delay to 0x10 [ 1.489028] rk_gmac-dwmac 30200000.ethernet: integrated PHY? (yes). [ 1.489231] rk_gmac-dwmac 30200000.ethernet: cannot get clock clk_mac_speed [ 1.495258] rk_gmac-dwmac 30200000.ethernet: init for RMII [ 1.529030] stmmac - user ID: 0x10, Synopsys ID: 0x35 [ 1.529046] Ring mode enabled [ 1.529061] DMA HW capability register supported [ 1.529070] Normal descriptors [ 1.529080] RX Checksum Offload Engine supported (type 2) [ 1.529088] TX Checksum insertion supported [ 1.529096] Wake-Up On Lan supported [ 1.529221] Enable RX Mitigation via HW Watchdog Timer [ 1.529468] of_get_named_gpiod_flags: can't parse 'snps,reset-gpio' property of node '/ethernet@30200000[0]' [ 1.555314] libphy: stmmac: probed [ 1.555350] eth%d: PHY ID 1234d400 at 0 IRQ POLL (stmmac-0:00) active [ 1.555364] eth%d: PHY ID 00000000 at 1 IRQ POLL (stmmac-0:01) [ 1.555376] eth%d: PHY ID 00000000 at 2 IRQ POLL (stmmac-0:02) [ 1.555389] eth%d: PHY ID 00000000 at 3 IRQ POLL (stmmac-0:03) [ 1.555401] eth%d: PHY ID 00000000 at 4 IRQ POLL (stmmac-0:04) [ 1.555413] eth%d: PHY ID 00000000 at 5 IRQ POLL (stmmac-0:05) [ 1.555425] eth%d: PHY ID 00000000 at 6 IRQ POLL (stmmac-0:06) [ 1.555437] eth%d: PHY ID 00000000 at 7 IRQ POLL (stmmac-0:07) [ 1.555656] eth%d: PHY ID 00000000 at 8 IRQ POLL (stmmac-0:08) [ 1.555669] eth%d: PHY ID 00000000 at 9 IRQ POLL (stmmac-0:09) [ 1.555681] eth%d: PHY ID 00000000 at 10 IRQ POLL (stmmac-0:0a) [ 1.555694] eth%d: PHY ID 00000000 at 11 IRQ POLL (stmmac-0:0b) [ 1.555706] eth%d: PHY ID 00000000 at 12 IRQ POLL (stmmac-0:0c) [ 1.555717] eth%d: PHY ID 00000000 at 13 IRQ POLL (stmmac-0:0d) [ 1.555730] eth%d: PHY ID 00000000 at 14 IRQ POLL (stmmac-0:0e) [ 1.555742] eth%d: PHY ID 00000000 at 15 IRQ POLL (stmmac-0:0f) [ 1.555754] eth%d: PHY ID 00000000 at 16 IRQ POLL (stmmac-0:10) [ 1.555768] eth%d: PHY ID 00000000 at 17 IRQ POLL (stmmac-0:11) [ 1.555780] eth%d: PHY ID 00000000 at 18 IRQ POLL (stmmac-0:12) [ 1.555792] eth%d: PHY ID 00000000 at 19 IRQ POLL (stmmac-0:13) [ 1.555804] eth%d: PHY ID 00000000 at 20 IRQ POLL (stmmac-0:14) [ 1.555817] eth%d: PHY ID 00000000 at 21 IRQ POLL (stmmac-0:15) [ 1.555829] eth%d: PHY ID 00000000 at 22 IRQ POLL (stmmac-0:16) [ 1.555841] eth%d: PHY ID 00000000 at 23 IRQ POLL (stmmac-0:17) [ 1.555854] eth%d: PHY ID 00000000 at 24 IRQ POLL (stmmac-0:18) [ 1.555866] eth%d: PHY ID 00000000 at 25 IRQ POLL (stmmac-0:19) [ 1.555877] eth%d: PHY ID 00000000 at 26 IRQ POLL (stmmac-0:1a) [ 1.555889] eth%d: PHY ID 00000000 at 27 IRQ POLL (stmmac-0:1b) [ 1.555902] eth%d: PHY ID 00000000 at 28 IRQ POLL (stmmac-0:1c) [ 1.555914] eth%d: PHY ID 00000000 at 29 IRQ POLL (stmmac-0:1d) [ 1.555926] eth%d: PHY ID 00000000 at 30 IRQ POLL (stmmac-0:1e) [ 1.555938] eth%d: PHY ID 00000000 at 31 IRQ POLL (stmmac-0:1f) [ 1.558167] usbcore: registered new interface driver rndis_wlan [ 1.558769] Rockchip WiFi SYS interface (V1.00) ... [ 1.559210] usbcore: registered new interface driver rtl8150 [ 1.559298] usbcore: registered new interface driver r8152 [ 1.559409] usbcore: registered new interface driver asix [ 1.559493] usbcore: registered new interface driver ax88179_178a [ 1.559582] usbcore: registered new interface driver cdc_ether [ 1.559675] usbcore: registered new interface driver rndis_host [ 1.559857] usbcore: registered new interface driver cdc_ncm [ 1.559993] usbcore: registered new interface driver cdc_mbim [ 1.560812] dwc2 30040000.usb: Looking up vusb_d-supply from device tree [ 1.560837] dwc2 30040000.usb: Looking up vusb_d-supply property in node /usb@30040000 failed [ 1.560872] 30040000.usb supply vusb_d not found, using dummy regulator [ 1.561031] dwc2 30040000.usb: Looking up vusb_a-supply from device tree [ 1.561051] dwc2 30040000.usb: Looking up vusb_a-supply property in node /usb@30040000 failed [ 1.561071] 30040000.usb supply vusb_a not found, using dummy regulator [ 1.575433] dwc2 30040000.usb: DWC OTG Controller [ 1.575664] dwc2 30040000.usb: new USB bus registered, assigned bus number 1 [ 1.575758] dwc2 30040000.usb: irq 49, io mem 0x30040000 [ 1.576312] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.576331] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.576349] usb usb1: Product: DWC OTG Controller [ 1.576364] usb usb1: Manufacturer: Linux 4.4.194 dwc2_hsotg [ 1.576377] usb usb1: SerialNumber: 30040000.usb [ 1.577900] hub 1-0:1.0: USB hub found [ 1.578011] hub 1-0:1.0: 1 port detected [ 1.580301] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.580359] ehci-platform: EHCI generic platform driver [ 1.583346] ehci-platform 30080000.usb: EHCI Host Controller [ 1.583925] ehci-platform 30080000.usb: new USB bus registered, assigned bus number 2 [ 1.584485] ehci-platform 30080000.usb: irq 50, io mem 0x30080000 [ 1.592215] ehci-platform 30080000.usb: USB 2.0 started, EHCI 1.00 [ 1.592745] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.592763] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.592778] usb usb2: Product: EHCI Host Controller [ 1.592792] usb usb2: Manufacturer: Linux 4.4.194 ehci_hcd [ 1.592807] usb usb2: SerialNumber: 30080000.usb [ 1.594205] hub 2-0:1.0: USB hub found [ 1.594306] hub 2-0:1.0: 1 port detected [ 1.597830] ehci-platform 300c0000.usb: EHCI Host Controller [ 1.598535] ehci-platform 300c0000.usb: new USB bus registered, assigned bus number 3 [ 1.599098] ehci-platform 300c0000.usb: irq 52, io mem 0x300c0000 [ 1.608882] ehci-platform 300c0000.usb: USB 2.0 started, EHCI 1.00 [ 1.609414] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.609432] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.609447] usb usb3: Product: EHCI Host Controller [ 1.609461] usb usb3: Manufacturer: Linux 4.4.194 ehci_hcd [ 1.609474] usb usb3: SerialNumber: 300c0000.usb [ 1.610912] hub 3-0:1.0: USB hub found [ 1.611017] hub 3-0:1.0: 1 port detected [ 1.614532] ehci-platform 30100000.usb: EHCI Host Controller [ 1.615187] ehci-platform 30100000.usb: new USB bus registered, assigned bus number 4 [ 1.615912] ehci-platform 30100000.usb: irq 54, io mem 0x30100000 [ 1.625548] ehci-platform 30100000.usb: USB 2.0 started, EHCI 1.00 [ 1.626077] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.626100] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.626117] usb usb4: Product: EHCI Host Controller [ 1.626131] usb usb4: Manufacturer: Linux 4.4.194 ehci_hcd [ 1.626144] usb usb4: SerialNumber: 30100000.usb [ 1.627536] hub 4-0:1.0: USB hub found [ 1.627635] hub 4-0:1.0: 1 port detected [ 1.628715] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.628925] ohci-platform: OHCI generic platform driver [ 1.629689] ohci-platform 300a0000.usb: Generic Platform OHCI controller [ 1.630360] ohci-platform 300a0000.usb: new USB bus registered, assigned bus number 5 [ 1.630796] ohci-platform 300a0000.usb: irq 51, io mem 0x300a0000 [ 1.686565] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.686590] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.686606] usb usb5: Product: Generic Platform OHCI controller [ 1.686621] usb usb5: Manufacturer: Linux 4.4.194 ohci_hcd [ 1.686633] usb usb5: SerialNumber: 300a0000.usb [ 1.688182] hub 5-0:1.0: USB hub found [ 1.688299] hub 5-0:1.0: 1 port detected [ 1.689596] ohci-platform 300e0000.usb: Generic Platform OHCI controller [ 1.690189] ohci-platform 300e0000.usb: new USB bus registered, assigned bus number 6 [ 1.690631] ohci-platform 300e0000.usb: irq 53, io mem 0x300e0000 [ 1.746556] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.746583] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.746597] usb usb6: Product: Generic Platform OHCI controller [ 1.746614] usb usb6: Manufacturer: Linux 4.4.194 ohci_hcd [ 1.746627] usb usb6: SerialNumber: 300e0000.usb [ 1.748073] hub 6-0:1.0: USB hub found [ 1.748177] hub 6-0:1.0: 1 port detected [ 1.749489] ohci-platform 30120000.usb: Generic Platform OHCI controller [ 1.750098] ohci-platform 30120000.usb: new USB bus registered, assigned bus number 7 [ 1.750545] ohci-platform 30120000.usb: irq 55, io mem 0x30120000 [ 1.806593] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.806617] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.806632] usb usb7: Product: Generic Platform OHCI controller [ 1.806647] usb usb7: Manufacturer: Linux 4.4.194 ohci_hcd [ 1.806660] usb usb7: SerialNumber: 30120000.usb [ 1.808081] hub 7-0:1.0: USB hub found [ 1.808180] hub 7-0:1.0: 1 port detected [ 1.810238] usbcore: registered new interface driver cdc_acm [ 1.810259] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.810393] usbcore: registered new interface driver cdc_wdm [ 1.810517] usbcore: registered new interface driver uas [ 1.810839] usbcore: registered new interface driver usb-storage [ 1.811110] usbcore: registered new interface driver usbserial [ 1.811203] usbcore: registered new interface driver usbserial_generic [ 1.811283] usbserial: USB Serial support registered for generic [ 1.811409] usbcore: registered new interface driver cp210x [ 1.811497] usbserial: USB Serial support registered for cp210x [ 1.811698] usbcore: registered new interface driver ftdi_sio [ 1.811764] usbserial: USB Serial support registered for FTDI USB Serial Device [ 1.812530] usbcore: registered new interface driver keyspan [ 1.812617] usbserial: USB Serial support registered for Keyspan - (without firmware) [ 1.812685] usbserial: USB Serial support registered for Keyspan 1 port adapter [ 1.812772] usbserial: USB Serial support registered for Keyspan 2 port adapter [ 1.812845] usbserial: USB Serial support registered for Keyspan 4 port adapter [ 1.812989] usbcore: registered new interface driver option [ 1.813057] usbserial: USB Serial support registered for GSM modem (1-port) [ 1.813794] usbcore: registered new interface driver oti6858 [ 1.813876] usbserial: USB Serial support registered for oti6858 [ 1.813998] usbcore: registered new interface driver pl2303 [ 1.814072] usbserial: USB Serial support registered for pl2303 [ 1.814214] usbcore: registered new interface driver qcserial [ 1.814284] usbserial: USB Serial support registered for Qualcomm USB modem [ 1.814450] usbcore: registered new interface driver sierra [ 1.814519] usbserial: USB Serial support registered for Sierra USB modem [ 1.814589] usb20_otg: version 3.10a 21-DEC-2012 [ 1.815320] usb20_host: version 3.10a 21-DEC-2012 [ 1.817086] usbcore: registered new interface driver iforce [ 1.817326] usbcore: registered new interface driver xpad [ 1.817666] usbcore: registered new interface driver usbtouchscreen [ 1.819285] i2c /dev entries driver [ 1.821499] rockchip-iodomain 11000000.syscon:io-domains: Looking up vccio1-supply from device tree [ 1.821851] rockchip-iodomain 11000000.syscon:io-domains: Looking up vccio2-supply from device tree [ 1.822008] rockchip-iodomain 11000000.syscon:io-domains: Looking up vccio3-supply from device tree [ 1.822030] rockchip-iodomain 11000000.syscon:io-domains: Looking up vccio3-supply property in node /syscon@11000000/io-domains failed [ 1.822063] rockchip-iodomain 11000000.syscon:io-domains: Looking up vccio4-supply from device tree [ 1.824034] Boot mode: normal [ 1.826024] rockchip-thermal 11150000.tsadc: tsadc is probed successfully! [ 1.827094] Bluetooth: Virtual HCI driver ver 1.5 [ 1.827653] Bluetooth: HCI UART driver ver 2.3 [ 1.827678] Bluetooth: HCI UART protocol H4 registered [ 1.827692] Bluetooth: HCI UART protocol LL registered [ 1.827702] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 1.827924] usbcore: registered new interface driver bfusb [ 1.828089] usbcore: registered new interface driver btusb [ 1.828109] rtk_btusb: RTKBT_RELEASE_NAME: 20180702_BT_ANDROID_8.1 [ 1.828119] rtk_btusb: Realtek Bluetooth USB driver module init, version 4.1.5 [ 1.828128] rtk_btusb: Register usb char device interface for BT driver [ 1.828724] usbcore: registered new interface driver rtk_btusb [ 1.828757] Bluetooth: Generic Bluetooth SDIO driver ver 0.1 [ 1.829508] cpu cpu0: leakage=3 [ 1.829545] cpu cpu0: leakage-volt-sel=0 [ 1.829596] cpu cpu0: Looking up cpu-supply from device tree [ 1.829718] pwm-regulator vdd-arm-regulator: Looking up pwm-supply from device tree [ 1.829742] pwm-regulator vdd-arm-regulator: Looking up pwm-supply property in node /vdd-arm-regulator failed [ 1.829965] cpu cpu0: Failed to get pvtm [ 1.831354] cpu cpu0: Looking up cpu-supply from device tree [ 1.831455] pwm-regulator vdd-arm-regulator: Looking up pwm-supply from device tree [ 1.831477] pwm-regulator vdd-arm-regulator: Looking up pwm-supply property in node /vdd-arm-regulator failed [ 1.831778] cpu cpu0: Looking up cpu-supply from device tree [ 1.831837] pwm-regulator vdd-arm-regulator: Looking up pwm-supply from device tree [ 1.831856] pwm-regulator vdd-arm-regulator: Looking up pwm-supply property in node /vdd-arm-regulator failed [ 1.833030] cpu cpu0: avs=0 [ 1.833146] cpu cpu0: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 [ 1.833176] cpu cpu0: failed to read out thermal zone (-22) [ 1.834795] cpu cpu0: failed to find power_model node [ 1.836877] pwrseq_simple sdio-pwrseq: GPIO lookup for consumer reset [ 1.836907] pwrseq_simple sdio-pwrseq: using device tree for GPIO lookup [ 1.836951] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/sdio-pwrseq[0]' - status (0) [ 1.837331] Synopsys Designware Multimedia Card Interface Driver [ 1.838556] dwmmc_rockchip 30000000.dwmmc: IDMAC supports 32-bit address mode. [ 1.838731] dwmmc_rockchip 30000000.dwmmc: Using internal DMA controller. [ 1.838756] dwmmc_rockchip 30000000.dwmmc: Version ID is 270a [ 1.839008] dwmmc_rockchip 30000000.dwmmc: DW MMC controller at irq 46,32 bit host data width,256 deep fifo [ 1.839080] dwmmc_rockchip 30000000.dwmmc: Looking up vmmc-supply from device tree [ 1.839099] dwmmc_rockchip 30000000.dwmmc: Looking up vmmc-supply property in node /dwmmc@30000000 failed [ 1.839138] dwmmc_rockchip 30000000.dwmmc: Looking up vqmmc-supply from device tree [ 1.839155] dwmmc_rockchip 30000000.dwmmc: Looking up vqmmc-supply property in node /dwmmc@30000000 failed [ 1.839175] dwmmc_rockchip 30000000.dwmmc: No vmmc regulator found [ 1.839188] dwmmc_rockchip 30000000.dwmmc: No vqmmc regulator found [ 1.839221] dwmmc_rockchip 30000000.dwmmc: GPIO lookup for consumer cd [ 1.839235] dwmmc_rockchip 30000000.dwmmc: using device tree for GPIO lookup [ 1.839288] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/dwmmc@30000000[0]' - status (0) [ 1.839357] gpio-49 (cd): gpiod_set_debounce: missing set() or set_debounce() operations [ 1.839373] dwmmc_rockchip 30000000.dwmmc: Got CD GPIO [ 1.839390] dwmmc_rockchip 30000000.dwmmc: GPIO lookup for consumer wp [ 1.839403] dwmmc_rockchip 30000000.dwmmc: using device tree for GPIO lookup [ 1.839417] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@30000000[0]' [ 1.839432] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@30000000[0]' [ 1.839445] dwmmc_rockchip 30000000.dwmmc: using lookup tables for GPIO lookup [ 1.839460] dwmmc_rockchip 30000000.dwmmc: lookup for GPIO wp failed [ 1.852565] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 1.866011] dwmmc_rockchip 30000000.dwmmc: 1 slots initialized [ 1.866717] dwmmc_rockchip 30010000.dwmmc: num-slots property not found, assuming 1 slot is available [ 1.866909] dwmmc_rockchip 30010000.dwmmc: IDMAC supports 32-bit address mode. [ 1.867130] dwmmc_rockchip 30010000.dwmmc: Using internal DMA controller. [ 1.867325] dwmmc_rockchip 30010000.dwmmc: Version ID is 270a [ 1.867462] dwmmc_rockchip 30010000.dwmmc: DW MMC controller at irq 47,32 bit host data width,256 deep fifo [ 1.867532] dwmmc_rockchip 30010000.dwmmc: Looking up vmmc-supply from device tree [ 1.867551] dwmmc_rockchip 30010000.dwmmc: Looking up vmmc-supply property in node /dwmmc@30010000 failed [ 1.867595] dwmmc_rockchip 30010000.dwmmc: Looking up vqmmc-supply from device tree [ 1.867612] dwmmc_rockchip 30010000.dwmmc: Looking up vqmmc-supply property in node /dwmmc@30010000 failed [ 1.867632] dwmmc_rockchip 30010000.dwmmc: No vmmc regulator found [ 1.867647] dwmmc_rockchip 30010000.dwmmc: No vqmmc regulator found [ 1.867682] dwmmc_rockchip 30010000.dwmmc: GPIO lookup for consumer wp [ 1.867695] dwmmc_rockchip 30010000.dwmmc: using device tree for GPIO lookup [ 1.867772] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@30010000[0]' [ 1.867789] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@30010000[0]' [ 1.867803] dwmmc_rockchip 30010000.dwmmc: using lookup tables for GPIO lookup [ 1.867821] dwmmc_rockchip 30010000.dwmmc: lookup for GPIO wp failed [ 1.867973] dwmmc_rockchip 30010000.dwmmc: allocated mmc-pwrseq [ 1.880989] mmc_host mmc1: Bus speed (slot 0) = 2343750Hz (slot req 400000Hz, actual 390625HZ div = 3) [ 1.893829] dwmmc_rockchip 30010000.dwmmc: 1 slots initialized [ 1.894910] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_blue[0]' - status (0) [ 1.895318] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_red[0]' - status (0) [ 1.896073] ledtrig-cpu: registered to indicate activity on CPUs [ 1.899584] rk-crypto 100a0000.cypto-controller: Crypto Accelerator successfully registered [ 1.900485] hidraw: raw HID events driver (C) Jiri Kosina [ 1.904213] usbcore: registered new interface driver usbhid [ 1.904235] usbhid: USB HID core driver [ 1.905890] rockchip-dmc dmc: failed to get the count of devfreq-event in /dmc node [ 1.906983] rockchip-dmc dmc: Looking up center-supply from device tree [ 1.907153] pwm-regulator vdd-log-regulator: Looking up pwm-supply from device tree [ 1.907177] pwm-regulator vdd-log-regulator: Looking up pwm-supply property in node /vdd-log-regulator failed [ 1.919160] rockchip-dmc dmc: leakage=2 [ 1.919196] rockchip-dmc dmc: leakage-volt-sel=0 [ 1.919241] rockchip-dmc dmc: Looking up center-supply from device tree [ 1.919336] pwm-regulator vdd-log-regulator: Looking up pwm-supply from device tree [ 1.919359] pwm-regulator vdd-log-regulator: Looking up pwm-supply property in node /vdd-log-regulator failed [ 1.919432] vdd_log: could not add device link dmc err -17 [ 1.919465] vdd_log: Failed to create debugfs directory [ 1.919486] rockchip-dmc dmc: Failed to get pvtm [ 1.921066] rockchip-dmc dmc: avs=0 [ 1.921117] rockchip-dmc dmc: failed to get vop bandwidth to dmc rate [ 1.921994] rockchip-dmc dmc: failed to get vop pn to msch rl [ 1.923390] rockchip-dmc dmc: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 [ 1.938875] dwmmc_rockchip 30010000.dwmmc: Unexpected interrupt latency [ 1.940878] rknandbase v1.2 2018-05-08 [ 1.941734] rknand 30030000.nandc: rknand_probe clk rate = 150000000 [ 1.942011] No.1 FLASH ID:89 64 64 3c a1 c [ 1.944408] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 1.944515] mmc0: new high speed SDHC card at address aaaa [ 1.945217] No.1 FLASH ID:89 64 64 3c a1 c [ 1.945788] mmcblk0: mmc0:aaaa SD32G 29.7 GiB [ 1.946551] FlashLoadPhyInfo fail 400!! [ 1.947412] mmcblk0: p1 p2 [ 1.952922] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 1.954222] mmc1: new high speed SDIO card at address 0001 [ 1.963063] ECC:60 [ 1.963087] FTL version: 5.0.57 20190828 [ 2.003677] ...FtlInit FtlSysBlkInit error ,format device! [ 2.003692] ftl_init 0 [ 2.004423] ------------[ cut here ]------------ [ 2.004451] WARNING: CPU: 0 PID: 1 at fs/proc/generic.c:345 proc_register+0xe4/0x104() [ 2.004459] proc_dir_entry '/proc/mtd' already registered [ 2.004467] Modules linked in: [ 2.004482] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.194 #1 [ 2.004488] Hardware name: Generic DT based system [ 2.004521] [] (unwind_backtrace) from [] (show_stack+0x20/0x24) [ 2.004539] [] (show_stack) from [] (dump_stack+0x84/0xa4) [ 2.004558] [] (dump_stack) from [] (warn_slowpath_common+0x98/0xc4) [ 2.004574] [] (warn_slowpath_common) from [] (warn_slowpath_fmt+0x40/0x48) [ 2.004588] [] (warn_slowpath_fmt) from [] (proc_register+0xe4/0x104) [ 2.004605] [] (proc_register) from [] (proc_create_data+0xa4/0xc0) [ 2.004622] [] (proc_create_data) from [] (rknand_dev_init+0x360/0x3d0) [ 2.004640] [] (rknand_dev_init) from [] (rknand_driver_init+0x30/0x40) [ 2.004655] [] (rknand_driver_init) from [] (do_one_initcall+0x1b4/0x1ec) [ 2.004674] [] (do_one_initcall) from [] (kernel_init_freeable+0x214/0x260) [ 2.004693] [] (kernel_init_freeable) from [] (kernel_init+0x18/0x118) [ 2.004714] [] (kernel_init) from [] (ret_from_fork+0x14/0x2c) [ 2.004751] ---[ end trace 45d2e25c0a9b59f2 ]--- [ 2.005141] rknand vendor storage init failed ! [ 2.006979] rk3228-codec 12010000.codec: GPIO lookup for consumer spk-en [ 2.006996] rk3228-codec 12010000.codec: using device tree for GPIO lookup [ 2.007009] of_get_named_gpiod_flags: can't parse 'spk-en-gpios' property of node '/codec@12010000[0]' [ 2.007043] of_get_named_gpiod_flags: parsed 'spk-en-gpio' property of node '/codec@12010000[0]' - status (0) [ 2.007101] rk3228-codec 12010000.codec: spk_depop_time use default value. [ 2.012768] NET: Registered protocol family 10 [ 2.014135] NET: Registered protocol family 17 [ 2.014365] Bluetooth: RFCOMM socket layer initialized [ 2.014407] Bluetooth: RFCOMM ver 1.11 [ 2.014435] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.014454] Bluetooth: HIDP socket layer initialized [ 2.014749] [WLAN_RFKILL]: Enter rfkill_wlan_init [ 2.015023] [WLAN_RFKILL]: Enter rfkill_wlan_probe [ 2.015053] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = [00] [ 2.015062] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control. [ 2.015070] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio. [ 2.015084] of_get_named_gpiod_flags: can't parse 'WIFI,poweren_gpio' property of node '/wireless-wlan[0]' [ 2.015095] of_get_named_gpiod_flags: can't parse 'WIFI,vbat_gpio' property of node '/wireless-wlan[0]' [ 2.015106] of_get_named_gpiod_flags: can't parse 'WIFI,reset_gpio' property of node '/wireless-wlan[0]' [ 2.015147] of_get_named_gpiod_flags: parsed 'WIFI,host_wake_irq' property of node '/wireless-wlan[0]' - status (0) [ 2.015157] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 28, flags = 0. [ 2.015172] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found ! [ 2.015179] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio [ 2.015194] [WLAN_RFKILL]: Exit rfkill_wlan_probe [ 2.015274] [BT_RFKILL]: Enter rfkill_rk_init [ 2.015616] Key type dns_resolver registered [ 2.016223] ThumbEE CPU extension supported. [ 2.016256] Registering SWP/SWPB emulation handler [ 2.017341] registered taskstats version 1 [ 2.018564] rga2: Driver loaded successfully ver:4.01 [ 2.018755] rga2: Module initialized. [ 2.018935] pvtm list NULL [ 2.019490] rk-vcodec 20030000.rkvdec: Looking up vcodec-supply from device tree [ 2.019567] pwm-regulator vdd-log-regulator: Looking up pwm-supply from device tree [ 2.019581] pwm-regulator vdd-log-regulator: Looking up pwm-supply property in node /vdd-log-regulator failed [ 2.020170] rk-vcodec 20030000.rkvdec: leakage=2 [ 2.020195] rk-vcodec 20030000.rkvdec: leakage-volt-sel=0 [ 2.020218] rk-vcodec 20030000.rkvdec: Looking up vcodec-supply from device tree [ 2.020269] pwm-regulator vdd-log-regulator: Looking up pwm-supply from device tree [ 2.020284] pwm-regulator vdd-log-regulator: Looking up pwm-supply property in node /vdd-log-regulator failed [ 2.020348] vdd_log: could not add device link 20030000.rkvdec err -17 [ 2.020370] vdd_log: Failed to create debugfs directory [ 2.020387] rk-vcodec 20030000.rkvdec: Failed to get pvtm [ 2.021386] rk-vcodec 20030000.rkvdec: avs=0 [ 2.021667] rk-vcodec 20030000.rkvdec: probe device [ 2.022237] rk-vcodec 20030000.rkvdec: drm allocator with mmu enabled [ 2.023628] rk-vcodec 20030000.rkvdec: init success [ 2.024232] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/sound[0]' [ 2.024249] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/sound[0]' [ 2.046790] asoc-simple-card sound: rk3228-hifi <-> 100b0000.i2s1 mapping ok [ 2.049202] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/hdmi-sound[0]' [ 2.049227] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/hdmi-sound[0]' [ 2.050380] asoc-simple-card hdmi-sound: i2s-hifi <-> 100c0000.i2s0 mapping ok [ 2.052339] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/spdif-sound[0]' [ 2.052361] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/spdif-sound[0]' [ 2.054028] asoc-simple-card spdif-sound: dit-hifi <-> 100d0000.spdif mapping ok [ 2.055665] console [netcon0] enabled [ 2.055679] netconsole: network logging started [ 2.056284] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio_keys/power-key[0]' - status (0) [ 2.056374] gpio-121 (GPIO Key Power): gpiod_set_debounce: missing set() or set_debounce() operations [ 2.056821] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.057619] hctosys: unable to open rtc device (rtc0) [ 2.073997] ALSA device list: [ 2.074021] #0: ROCKCHIP,RK3229 [ 2.074029] #1: HDMI [ 2.074036] #2: ROCKCHIP,SPDIF [ 2.078391] Freeing unused kernel memory: 3072K [ 2.105611] usb 6-1: new low-speed USB device number 2 using ohci-platform [ 2.242006] Checking disk(s): UUID=2704-3205 UUID=c28da4c5-fe1c-410a-8f8c-95ca4729229c [ 2.297263] usb 6-1: New USB device found, idVendor=413c, idProduct=2107 [ 2.297287] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.297297] usb 6-1: Product: Dell USB Entry Keyboard [ 2.297308] usb 6-1: Manufacturer: Dell [ 2.307851] input: Dell Dell USB Entry Keyboard as /devices/platform/300e0000.usb/usb6/6-1/6-1:1.0/0003:413C:2107.0001/input/input1 [ 2.360015] hid-generic 0003:413C:2107.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Entry Keyboard] on usb-300e0000.usb-1/input0 [ 2.667841] fsck: CP437: Invalid argument [ 2.668070] fsck: fsck.fat 4.1 (2017-01-24) [ 2.668333] fsck: /dev/mmcblk0p1: 10 files, 18240/65501 clusters [ 2.668616] fsck: STORAGE: clean, 11/7657472 files, 973399/30626304 blocks [ 3.128149] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 3.128965] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 3.288568] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.818589] systemd[1]: System time before build time, advancing clock. [ 3.824249] cgroup: cgroup2: unknown option "nsdelegate" [ 3.835666] systemd[1]: systemd 242 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid) [ 3.836651] systemd[1]: Detected architecture arm. [ 3.836844] systemd[1]: Running with unpopulated /etc. [ 3.842960] systemd[1]: Set hostname to . [ 3.843102] systemd[1]: Cannot open /etc/machine-id: No such file or directory [ 3.845035] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument [ 4.477658] systemd[1]: Populated /etc with preset unit settings. [ 4.513256] systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 4.513295] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 4.653434] random: systemd: uninitialized urandom read (16 bytes read, 66 bits of entropy available) [ 4.654387] systemd[1]: Listening on Journal Socket (/dev/log). [ 4.655034] random: systemd: uninitialized urandom read (16 bytes read, 66 bits of entropy available) [ 4.655930] systemd[1]: Listening on udev Kernel Socket. [ 4.656118] random: systemd: uninitialized urandom read (16 bytes read, 66 bits of entropy available) [ 4.656546] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 4.656728] random: systemd: uninitialized urandom read (16 bytes read, 66 bits of entropy available) [ 4.657419] systemd[1]: Listening on udev Control Socket. [ 4.657789] random: systemd: uninitialized urandom read (16 bytes read, 66 bits of entropy available) [ 4.665901] systemd[1]: Starting Show Version... [ 4.739305] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 4.739503] random: systemd: uninitialized urandom read (16 bytes read, 67 bits of entropy available) [ 4.741277] systemd[1]: Listening on RPCbind Server Activation Socket. [ 4.741453] random: systemd: uninitialized urandom read (16 bytes read, 67 bits of entropy available) [ 4.741566] systemd[1]: Reached target RPC Port Mapper. [ 4.741750] random: systemd: uninitialized urandom read (16 bytes read, 67 bits of entropy available) [ 4.742248] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 4.742448] random: systemd: uninitialized urandom read (16 bytes read, 67 bits of entropy available) [ 4.744108] systemd[1]: Created slice User and Session Slice. [ 4.744285] random: systemd: uninitialized urandom read (16 bytes read, 67 bits of entropy available) [ 4.744391] systemd[1]: Reached target Paths. [ 4.745369] systemd[1]: Listening on Journal Socket. [ 4.751450] systemd[1]: Mounting Kernel Debug File System... [ 4.758457] systemd[1]: Starting Setup NTP servers for timesyncd... [ 4.767575] systemd[1]: Mounting Variable Directory... [ 4.776062] systemd[1]: Starting Create Persistent Log Directory on /storage... [ 4.777570] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 4.788089] systemd[1]: Mounting POSIX Message Queue File System... [ 4.788741] systemd[1]: Reached target Slices. [ 4.791538] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 4.792659] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 4.811380] systemd[1]: Started Show Version. [ 4.812584] systemd[1]: Mounted Kernel Debug File System. [ 4.815796] systemd[1]: Started Setup NTP servers for timesyncd. [ 4.816870] systemd[1]: Mounted Variable Directory. [ 4.820004] systemd[1]: Started Create Persistent Log Directory on /storage. [ 4.821072] systemd[1]: Mounted POSIX Message Queue File System. [ 4.828445] systemd[1]: Starting Create kernel modules tree from overlays... [ 4.830052] systemd[1]: Condition check resulted in Persistent Log Storage being skipped. [ 4.882430] kernel-overlays-setup: setup base modules [ 4.978532] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/4.4.194 [ 5.035553] vendor storage:20190527 ret = -1 [ 5.096319] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware [ 5.096630] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays [ 5.097094] kernel-overlays-setup: done [ 5.099278] systemd[1]: kernel-overlays.service: Succeeded. [ 5.101449] systemd[1]: Started Create kernel modules tree from overlays. [ 5.108453] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 5.116023] systemd[1]: Starting Mounting swapfile... [ 5.124616] systemd[1]: Starting Setup machine-id... [ 5.139600] systemd[1]: Starting Load Kernel Modules... [ 5.151636] systemd[1]: Starting udev Coldplug all Devices... [ 5.159915] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 5.295925] systemd[1]: Started Mounting swapfile. [ 5.297188] systemd[1]: Reached target Swap. [ 5.306145] systemd[1]: Mounting Temporary Directory (/tmp)... [ 5.310584] wireguard: loading out-of-tree module taints kernel. [ 5.314433] wireguard: WireGuard 0.0.20200215 loaded. See www.wireguard.com for information. [ 5.314453] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld . All Rights Reserved. [ 5.321724] systemd[1]: Started Load Kernel Modules. [ 5.337221] systemd[1]: Mounted Temporary Directory (/tmp). [ 5.339052] systemd[1]: Reached target Local File Systems. [ 5.340173] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 5.347689] systemd[1]: Starting Apply Kernel Variables... [ 5.357598] systemd[1]: Mounting Kernel Configuration File System... [ 5.364808] systemd[1]: Started Setup machine-id. [ 5.375122] systemd[1]: Starting Journal Service... [ 5.387162] systemd[1]: Starting Create Static Device Nodes in /dev... [ 5.404103] systemd[1]: Started Apply Kernel Variables. [ 5.406124] systemd[1]: Mounted Kernel Configuration File System. [ 5.441742] systemd[1]: Started Create Static Device Nodes in /dev. [ 5.767475] systemd[1]: Started Journal Service. [ 5.816990] systemd-journald[306]: Received request to flush runtime journal from PID 1 [ 6.494730] random: nonblocking pool is initialized [ 8.929699] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 417; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '15:34:44', on 'Apr 27 2020'. [ 8.930135] mali-utgard 20001000.gpu: mali_platform_device->num_resources = 13 [ 8.930174] mali-utgard 20001000.gpu: resource[0].start = 0x0x20001000 [ 8.930196] mali-utgard 20001000.gpu: resource[1].start = 0x0x20000000 [ 8.930214] mali-utgard 20001000.gpu: resource[2].start = 0x0x20003000 [ 8.930232] mali-utgard 20001000.gpu: resource[3].start = 0x0x20008000 [ 8.930249] mali-utgard 20001000.gpu: resource[4].start = 0x0x20004000 [ 8.930259] mali-utgard 20001000.gpu: resource[5].start = 0x0x2000a000 [ 8.930270] mali-utgard 20001000.gpu: resource[6].start = 0x0x20005000 [ 8.930280] mali-utgard 20001000.gpu: resource[7].start = 0x0x00000021 [ 8.930290] mali-utgard 20001000.gpu: resource[8].start = 0x0x00000022 [ 8.930301] mali-utgard 20001000.gpu: resource[9].start = 0x0x00000023 [ 8.930312] mali-utgard 20001000.gpu: resource[10].start = 0x0x00000022 [ 8.930322] mali-utgard 20001000.gpu: resource[11].start = 0x0x00000023 [ 8.930333] mali-utgard 20001000.gpu: resource[12].start = 0x0x00000022 [ 8.930343] D : [File] : drivers/gpu/arm/mali400/mali/platform/rk/rk.c; [Line] : 623; [Func] : mali_platform_device_init(); to add platform_specific_data to platform_device_of_mali. [ 8.930440] mali-utgard 20001000.gpu: Looking up mali-supply from device tree [ 8.930587] pwm-regulator vdd-log-regulator: Looking up pwm-supply from device tree [ 8.930610] pwm-regulator vdd-log-regulator: Looking up pwm-supply property in node /vdd-log-regulator failed [ 8.931053] mali-utgard 20001000.gpu: leakage=2 [ 8.931107] mali-utgard 20001000.gpu: leakage-volt-sel=0 [ 8.931167] mali-utgard 20001000.gpu: Looking up mali-supply from device tree [ 8.931306] pwm-regulator vdd-log-regulator: Looking up pwm-supply from device tree [ 8.931334] pwm-regulator vdd-log-regulator: Looking up pwm-supply property in node /vdd-log-regulator failed [ 8.931430] vdd_log: could not add device link 20001000.gpu err -17 [ 8.931475] vdd_log: Failed to create debugfs directory [ 8.931503] mali-utgard 20001000.gpu: Failed to get pvtm [ 8.932050] mali-utgard 20001000.gpu: avs=0 [ 8.953319] mali-utgard 20001000.gpu: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 [ 8.975983] Mali: Mali device driver loaded [ 9.212950] [ 9.212984] ======================================================= [ 9.212994] ==== Launching Wi-Fi driver! (Powered by Rockchip) ==== [ 9.213000] ======================================================= [ 9.213008] Realtek 8723DS SDIO WiFi driver (Powered by Rockchip,Ver v5.6.5_31752.20181221_COEX20181130-2e2e) init. [ 9.213016] [WLAN_RFKILL]: rockchip_wifi_power: 1 [ 9.213025] [BT_RFKILL]: rfkill_get_bt_power_state: rfkill-bt driver has not Successful initialized [ 9.213033] [WLAN_RFKILL]: wifi turn on power. -1 [ 9.213043] mmc1:mmc host rescan start! [ 9.213049] RTW: module init start [ 9.213059] RTW: rtl8723ds v5.6.5_31752.20181221_COEX20181130-2e2e [ 9.213066] RTW: build time: Apr 27 2020 15:34:57 [ 9.213073] RTW: rtl8723ds BT-Coex version = COEX20181130-2e2e [ 9.414617] stmmac: wakeup enable [ 9.458117] gpio_ir_recv ir-receiver: GPIO lookup for consumer (null) [ 9.458179] gpio_ir_recv ir-receiver: using device tree for GPIO lookup [ 9.458285] of_get_named_gpiod_flags: parsed 'gpios' property of node '/ir-receiver[0]' - status (0) [ 9.600981] Registered IR keymap rc-rktvbox [ 9.666681] IR NEC protocol handler initialized [ 9.692616] rc rc0: gpio_ir_recv as /devices/platform/ir-receiver/rc/rc0 [ 9.693195] input: gpio_ir_recv as /devices/platform/ir-receiver/rc/rc0/input2 [ 9.694466] rc rc0: lirc_dev: driver gpio_ir_recv registered at minor = 0, raw IR receiver, no transmitter [ 10.212341] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter [ 10.221952] RTW: == SDIO Card Info == [ 10.221988] RTW: clock: 50000000 Hz [ 10.221998] RTW: timing spec: sd high-speed [ 10.222018] RTW: sd3_bus_mode: FALSE [ 10.222024] RTW: ================ [ 10.222298] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.read_chip_version ### [ 10.222319] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.init_default_value ### [ 10.222328] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.intf_chip_configure ### [ 10.222341] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.read_adapter_info ### [ 10.222349] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.hal_power_on ### [ 10.222359] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.hal_power_off ### [ 10.222366] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.hal_init ### [ 10.222375] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.hal_deinit ### [ 10.222382] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.init_xmit_priv ### [ 10.222394] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.free_xmit_priv ### [ 10.222402] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.hal_xmit ### [ 10.222413] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.mgnt_xmit ### [ 10.222421] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.xmit_thread_handler ### [ 10.222431] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.hal_xmitframe_enqueue ### [ 10.222439] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.run_thread ### [ 10.222449] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.cancel_thread ### [ 10.222459] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.init_recv_priv ### [ 10.222470] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.free_recv_priv ### [ 10.222478] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.enable_interrupt ### [ 10.222486] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.disable_interrupt ### [ 10.222496] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.dm_init ### [ 10.222505] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.dm_deinit ### [ 10.222513] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.hal_dm_watchdog ### [ 10.222520] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.set_chnl_bw_handler ### [ 10.222528] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.set_hw_reg_handler ### [ 10.222540] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.GetHwRegHandler ### [ 10.222551] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.get_hal_def_var_handler ### [ 10.222559] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.SetHalDefVarHandler ### [ 10.222571] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.GetHalODMVarHandler ### [ 10.222580] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.SetHalODMVarHandler ### [ 10.222589] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.SetBeaconRelatedRegistersHandler ### [ 10.222597] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.fill_h2c_cmd ### [ 10.222604] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.c2h_handler ### [ 10.222612] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.fill_fake_txdesc ### [ 10.222622] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.hal_get_tx_buff_rsvd_page_num ### [ 10.222629] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.clear_interrupt ### [ 10.222637] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.fw_dl ### [ 10.222646] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.set_tx_power_index_handler ### [ 10.222655] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.get_tx_power_index_handler ### [ 10.222664] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.sreset_init_value ### [ 10.222673] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.sreset_reset_value ### [ 10.222681] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.silentreset ### [ 10.222688] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.sreset_xmit_status_check ### [ 10.222699] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.sreset_linked_status_check ### [ 10.222711] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.sreset_get_wifi_status ### [ 10.222720] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.sreset_inprogress ### [ 10.223269] RTW: module init ret=0 [ 10.360150] [ 10.360177] ======================================================= [ 10.360185] ==== Launching Wi-Fi driver! (Powered by Rockchip) ==== [ 10.360191] ======================================================= [ 10.360198] Realtek 8723DS SDIO WiFi driver (Powered by Rockchip,Ver v5.3.12_28613.20180703) init. [ 10.360207] [WLAN_RFKILL]: rockchip_wifi_power: 1 [ 10.360215] [BT_RFKILL]: rfkill_get_bt_power_state: rfkill-bt driver has not Successful initialized [ 10.360223] [WLAN_RFKILL]: wifi turn on power. -1 [ 10.360231] mmc1:mmc host rescan start! [ 10.360237] RTW: module init start [ 10.360244] RTW: rtl8189fs v5.3.12_28613.20180703 [ 10.360251] RTW: build time: Apr 27 2020 15:34:52 [ 10.360258] RTW: ## Calling platform_driver_register [ 10.360310] Error: Driver 'bcmdhd_wlan' is already registered, aborting... [ 10.360324] Error: Driver 'bcm4329_wlan' is already registered, aborting... [ 10.589346] input: eventlircd as /devices/virtual/input/input3 [ 11.026107] rk_gmac-dwmac 30200000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 11.359015] RTW: rtw_android_wifictrl_func_add: platform_driver_register timeout [ 11.359040] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter [ 11.359132] RTW: rtw_inetaddr_notifier_register [ 11.359660] RTW: == SDIO Card Info == [ 11.359696] RTW: clock: 50000000 Hz [ 11.359710] RTW: timing spec: sd high-speed [ 11.359730] RTW: sd3_bus_mode: FALSE [ 11.359750] RTW: ================ [ 11.359907] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.read_chip_version ### [ 11.359929] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.init_default_value ### [ 11.359945] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.intf_chip_configure ### [ 11.359966] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.read_adapter_info ### [ 11.359977] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.hal_power_on ### [ 11.359984] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.hal_power_off ### [ 11.360006] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.hal_init ### [ 11.360025] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.hal_deinit ### [ 11.360035] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.init_xmit_priv ### [ 11.360044] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.free_xmit_priv ### [ 11.360061] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.hal_xmit ### [ 11.360079] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.mgnt_xmit ### [ 11.360099] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.xmit_thread_handler ### [ 11.360114] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.hal_xmitframe_enqueue ### [ 11.360121] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.run_thread ### [ 11.360128] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.cancel_thread ### [ 11.360136] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.init_recv_priv ### [ 11.360143] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.free_recv_priv ### [ 11.360152] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.enable_interrupt ### [ 11.360159] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.disable_interrupt ### [ 11.360166] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.dm_init ### [ 11.360173] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.dm_deinit ### [ 11.360180] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.hal_dm_watchdog ### [ 11.360189] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.set_chnl_bw_handler ### [ 11.360196] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.set_hw_reg_handler ### [ 11.360210] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.GetHwRegHandler ### [ 11.360220] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.get_hal_def_var_handler ### [ 11.360227] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.SetHalDefVarHandler ### [ 11.360234] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.GetHalODMVarHandler ### [ 11.360242] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.SetHalODMVarHandler ### [ 11.360250] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.SetBeaconRelatedRegistersHandler ### [ 11.360258] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.fill_h2c_cmd ### [ 11.360265] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.c2h_handler ### [ 11.360274] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.fill_fake_txdesc ### [ 11.360282] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.hal_get_tx_buff_rsvd_page_num ### [ 11.360290] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.fw_dl ### [ 11.360298] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.set_tx_power_index_handler ### [ 11.360305] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.get_tx_power_index_handler ### [ 11.360313] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.sreset_init_value ### [ 11.360320] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.sreset_reset_value ### [ 11.360329] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.silentreset ### [ 11.360336] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.sreset_xmit_status_check ### [ 11.360345] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.sreset_linked_status_check ### [ 11.360353] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.sreset_get_wifi_status ### [ 11.360363] RTW: ### rtw_hal_ops_check - Error : Please hook hal_func.sreset_inprogress ### [ 11.360401] RTW: rtw_init_primary_adapter Failed! [ 11.360718] RTW: module init ret=0 [ 11.414748] generic_wifi_init_module [ 11.689063] [ 11.689063] *** sta_cfg_set, (null) *** [ 11.689063] [ 11.689100] redirect to /etc/firmware/ssv6051/ssv6051-wifi.cfg [ 11.737194] ssv6xxx_sdio_init [ 11.737513] ======================================= [ 11.737540] == RUN SDIO == [ 11.737546] ======================================= [ 11.737559] ssv6xxx_set_sdio_clk:set sdio clk 25000000Hz [ 11.737645] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0) [ 11.765331] SSV6XXX_SDIO mmc1:0001:1: vendor = 0x3030 device = 0x3030 [ 11.785958] ssv6xxx_sdio_power_on [ 11.799437] SSV6XXX_SDIO mmc1:0001:1: dataIOPort 0x10000 regIOPort 0x10020 [ 11.800339] ssv6xxx_dev_probe(): ssv6200 device found ! [ 11.804491] ssv6xxx_sdio_irq_disable [ 11.807338] MAC address from e-fuse [ 11.807377] EFUSE configuration [ 11.807389] Read efuse chip identity[75000000] [ 11.807395] r_calbration_result- 0 [ 11.807404] sar_result- 0 [ 11.807410] crystal_frequency_offset- 0 [ 11.807415] tx_power_index_1- 0 [ 11.807423] tx_power_index_2- 0 [ 11.807433] MAC address - 58:04:54:c2:b3:ed [ 11.815609] Registering Vendor80211 [ 11.815649] Register SSV cfg80211 vendor cmd(0x67) interface [ 11.815982] [MT-ENCRYPT]: create kthread e8aab640 for CPU 0, ret = 0 [ 11.816269] [MT-ENCRYPT]: create kthread e8aaa6c0 for CPU 1, ret = 0 [ 11.816578] [MT-ENCRYPT]: create kthread e8aa9740 for CPU 2, ret = 0 [ 11.819005] SSV WLAN driver ssv6200: Crypto task 721 running with priority 120. [ 11.823956] SSV WLAN driver ssv6200: Crypto task 723 running with priority 120. [ 11.825619] SSV WLAN driver ssv6200: Crypto task 722 running with priority 120. [ 11.829047] [MT-ENCRYPT]: create kthread e8aaae80 for CPU 3, ret = 0 [ 11.831176] SSV6XXX TX Task started. [ 11.831743] SSV WLAN driver ssv6200: Crypto task 725 running with priority 120. [ 11.831928] Pre-load cipher [ 11.835181] SSV6XXX RX Task started. [ 11.857593] mic hash allocate fail [ 11.857882] flash_file /tmp/flash.bin not found, disable sar [ 11.857906] SSV6051P setting [ 11.857919] SSV6XXX_IQK_CFG_XTAL_24M [ 11.857932] SSV6051P setting [0x6C726C72] [ 11.857953] TX power setting 0x5b606c72 [ 11.857966] Volt regulator LDO [ 11.860260] reset PLL [ 11.908739] ieee80211 phy0: Selected rate control algorithm 'ssv6xxx_rate_control' [ 11.910981] ieee80211 phy0: SSV6200 of South Silicon Valley [ 11.913564] SVN version 16529 [ 11.913592] SVN ROOT URL http://192.168.15.30/svn/software/project/release/android/box/rk3x28/6051.Q0.1009.21.400401/ssv6xxx [ 11.913599] COMPILER HOST icomm-buildserver-T320 [ 11.913607] COMPILER DATE 12-08-2017-10:34:54 [ 11.913613] COMPILER OS linux [ 11.913619] COMPILER OS ARCH x86_64-linux-gnu-thread-multi [ 11.914032] CHIP TAG: 2014012420010960 [ 11.914467] CHIP ID: RSV6200A0-201311 [ 11.918439] 0x800e0000 [ 11.981628] ADR_INFO_IDX_ADDR[80000230] ADR_INFO_LEN_ADDR[800002cc] [ 11.992299] Writing firmware to SSV6XXX... [ 12.002113] (block_count << 16) = 500000,reg =500000 [ 12.002295] Firmware "/etc/firmware/ssv6051/ssv6051-sw.bin" loaded [ 12.055780] Firmware check OK.d0000 = d0000 [ 12.110433] Firmware name sh->cfg.firmware_path=/etc/firmware/ssv6051/ssv6051-sw.bin [ 12.111802] Firmware version 16380 [ 12.111823] ssv6xxx_watchdog_controller 6 [ 12.114295] ssv6xxx_sdio_irq_enable [ 12.114616] # Do init_cali (iq) [ 12.115565] FW TX LOOPBACK OK [ 12.280435] FW TX LOOPBACK OK [ 12.280538] +++++++++++++++++++++++++++222222222222222!! [ 12.280915] ssv6200_start(): current channel: 1,sc->ps_status=0 [ 12.283972] [I] ssv6200_add_interface(): vif->type = 2, NL80211_IFTYPE_AP=3 [ 12.283994] ssv6xxx_config_vif_res id[0]. [ 12.284016] SSV WLAN driver ssv6200: VIF 58:04:54:c2:b3:ed of type 2 is added. [ 12.284061] BSS Changed use_short_preamble[0] [ 12.284077] BSS_CHANGED_ERP_SLOT: use_short_slot[0] [ 12.284427] NL80211_IFTYPE_STATION!! [ 12.284444] [I] ssv6200_bss_info_changed(): leave [ 12.284488] [I] sv6200_conf_tx vif[0] qos[0] queue[0] aifsn[2] cwmin[15] cwmax[1023] txop[0] [ 12.284737] [I] sv6200_conf_tx vif[0] qos[0] queue[1] aifsn[2] cwmin[15] cwmax[1023] txop[0] [ 12.284997] [I] sv6200_conf_tx vif[0] qos[0] queue[2] aifsn[2] cwmin[15] cwmax[1023] txop[0] [ 12.285251] [I] sv6200_conf_tx vif[0] qos[0] queue[3] aifsn[2] cwmin[15] cwmax[1023] txop[0] [ 12.292457] NL80211_IFTYPE_STATION!! [ 12.292485] [I] ssv6200_bss_info_changed(): leave [ 12.292504] Disable IEEE80211_CONF_PS ps_aid=0 [ 12.293596] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 12.504711] [ 12.504747] ======================================================= [ 12.504757] ==== Launching Wi-Fi driver! (Powered by Rockchip) ==== [ 12.504763] ======================================================= [ 12.504773] Realtek 8723CS SDIO WiFi driver (Powered by Rockchip,Ver v5.2.1.7_25082.20171108_COEX20170626-1a00_wifi_hal) init. [ 12.504783] [WLAN_RFKILL]: rockchip_wifi_power: 1 [ 12.504794] [BT_RFKILL]: rfkill_get_bt_power_state: rfkill-bt driver has not Successful initialized [ 12.504802] [WLAN_RFKILL]: wifi turn on power. -1 [ 12.504811] mmc1:mmc host rescan start! [ 12.504818] RTW: module init start [ 12.504827] RTW: rtl8723cs v5.2.1.7_25082.20171108_COEX20170626-1a00_wifi_hal [ 12.504834] RTW: build time: Apr 27 2020 15:34:56 [ 12.504841] RTW: rtl8723cs BT-Coex version = COEX20170626-1a00 [ 12.504870] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter [ 12.505276] Error: Driver 'bcmdhd_wlan' is already registered, aborting... [ 12.505309] Error: Driver 'bcm4329_wlan' is already registered, aborting... [ 13.502241] RTW: module init ret=0 LibreELECupstairs:~ #