=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2023.02.22 03:45:08 =~=~=~=~=~=~=~=~=~=~=~= dmesg [ 0.000000] Booting Linux on physical CPU 0xf00 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.194 (ilmich@workilmich.home.arpa) (gcc version 8.3.0 (GCC) ) #1 SMP PREEMPT Wed Jan 12 09:51:25 CET 2022 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: RK3228a MXQ 4K Pro [ 0.000000] earlycon: Early serial console at MMIO32 0x11030000 (options '') [ 0.000000] bootconsole [uart0] enabled [ 0.000000] cma: Reserved 16 MiB at 0x9f000000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 258560 [ 0.000000] free_area_init_node: node 0, pgdat c12a6340, node_mem_map ef6fa000 [ 0.000000] Normal zone: 1728 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 193024 pages, LIFO batch:31 [ 0.000000] HighMem zone: 65536 pages, LIFO batch:15 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv65535.65535 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] PERCPU: Embedded 13 pages/cpu @ef69f000 s24472 r8192 d20584 u53248 [ 0.000000] pcpu-alloc: s24472 r8192 d20584 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256832 [ 0.000000] Kernel command line: root=/dev/ram0 rdinit=/init usbcore.autosuspend=-1 boot=UUID=1201-5629 disk=UUID=9dd04483-0fbd-438e-b246-a95c9a62de36 quiet console=uart8250,mmio32,0x11030000 console=tty0 video=TV-1:d earlycon=uart8250,mmio32,0x11030000 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 986900K/1034240K available (10240K kernel code, 805K rwdata, 2636K rodata, 3072K init, 1437K bss, 30956K reserved, 16384K cma-reserved, 245760K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0b00000 (11232 kB) [ 0.000000] .init : 0xc0f00000 - 0xc1200000 (3072 kB) [ 0.000000] .data : 0xc1200000 - 0xc12c9430 ( 806 kB) [ 0.000000] .bss : 0xc12cb000 - 0xc1432664 (1438 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000025] Switching to timer-based delay loop, resolution 41ns [ 0.001066] Console: colour dummy device 80x30 [ 0.001090] console [tty0] enabled [ 0.001102] bootconsole [uart0] disabled [ 0.001147] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000) [ 0.001168] pid_max: default: 32768 minimum: 301 [ 0.001289] Security Framework initialized [ 0.001305] Yama: becoming mindful. [ 0.001388] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001406] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002498] Initializing cgroup subsys io [ 0.002539] Initializing cgroup subsys memory [ 0.002592] Initializing cgroup subsys devices [ 0.002616] Initializing cgroup subsys freezer [ 0.002636] Initializing cgroup subsys pids [ 0.002711] CPU: Testing write buffer coherency: ok [ 0.002776] ftrace: allocating 34516 entries in 102 pages [ 0.071827] /cpus/cpu@f00 missing clock-frequency property [ 0.071891] /cpus/cpu@f01 missing clock-frequency property [ 0.071926] /cpus/cpu@f02 missing clock-frequency property [ 0.071962] /cpus/cpu@f03 missing clock-frequency property [ 0.071990] CPU0: update cpu_capacity 430 [ 0.072002] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00 [ 0.072115] Setting up static identity map for 0x60100000 - 0x60100058 [ 0.105410] CPU1: update cpu_capacity 430 [ 0.105421] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01 [ 0.115492] CPU2: update cpu_capacity 430 [ 0.115501] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02 [ 0.125595] CPU3: update cpu_capacity 430 [ 0.125605] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03 [ 0.125765] Brought up 4 CPUs [ 0.125808] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 0.125817] CPU: All CPU(s) started in SVC mode. [ 0.127896] devtmpfs: initialized [ 0.145609] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.146376] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.146417] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.148159] pinctrl core: initialized pinctrl subsystem [ 0.148724] regulator-dummy: no parameters [ 0.150207] NET: Registered protocol family 16 [ 0.154298] DMA: preallocated 2048 KiB pool for atomic coherent allocations [ 0.165827] cpuidle: using governor ladder [ 0.175848] cpuidle: using governor menu [ 0.195131] gpiochip_add_data: registered GPIOs 0 to 31 on device: gpio0 [ 0.195298] gpiochip_add_data: registered GPIOs 32 to 63 on device: gpio1 [ 0.195454] gpiochip_add_data: registered GPIOs 64 to 95 on device: gpio2 [ 0.195629] gpiochip_add_data: registered GPIOs 96 to 127 on device: gpio3 [ 0.204592] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.204613] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.260059] rockchip-pm rockchip-suspend: not set wakeup-config [ 0.260091] rockchip-pm rockchip-suspend: not set pwm-regulator-config [ 0.260610] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulators/regulator@0[0]' [ 0.260665] vccio_1v8: 1800 mV [ 0.261081] reg-fixed-voltage regulators:regulator@0: vccio_1v8 supplying 1800000uV [ 0.261198] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulators/regulator@1[0]' [ 0.261234] vccio_3v3: 3300 mV [ 0.261586] reg-fixed-voltage regulators:regulator@1: vccio_3v3 supplying 3300000uV [ 0.261951] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc-host-regulator[0]' - status (0) [ 0.262051] vcc_host: no parameters [ 0.262394] reg-fixed-voltage vcc-host-regulator: vcc_host supplying 0uV [ 0.262694] of_get_named_gpiod_flags: parsed 'gpio' property of node '/otg-vbus-regulator[0]' - status (0) [ 0.262779] vcc_otg_vbus: 5000 mV [ 0.263169] reg-fixed-voltage otg-vbus-regulator: vcc_otg_vbus supplying 5000000uV [ 0.263297] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc-phy-regulator[0]' [ 0.263413] vcc_phy: 1800 mV [ 0.263781] reg-fixed-voltage vcc-phy-regulator: vcc_phy supplying 1800000uV [ 0.264662] iommu: Adding device 20020000.vpu-service to group 0 [ 0.264775] iommu: Adding device 20030000.rkvdec to group 1 [ 0.264874] iommu: Adding device 20050000.vop to group 2 [ 0.264974] iommu: Adding device 20070000.iep to group 3 [ 0.265642] rk_iommu 20020800.iommu: can't get sclk [ 0.266298] rk_iommu 20030480.iommu: can't get sclk [ 0.266591] rk_iommu 20053f00.iommu: can't get sclk [ 0.266840] rk_iommu 20070800.iommu: can't get aclk [ 0.266860] rk_iommu 20070800.iommu: can't get hclk [ 0.266876] rk_iommu 20070800.iommu: can't get sclk [ 0.267798] SCSI subsystem initialized [ 0.268211] usbcore: registered new interface driver usbfs [ 0.268308] usbcore: registered new interface driver hub [ 0.268480] usbcore: registered new device driver usb [ 0.270571] pps_core: LinuxPPS API ver. 1 registered [ 0.270586] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.270638] PTP clock support registered [ 0.273086] Advanced Linux Sound Architecture Driver Initialized. [ 0.274223] Bluetooth: Core ver 2.21 [ 0.274303] NET: Registered protocol family 31 [ 0.274315] Bluetooth: HCI device and connection manager initialized [ 0.274338] Bluetooth: HCI socket layer initialized [ 0.274356] Bluetooth: L2CAP socket layer initialized [ 0.274406] Bluetooth: SCO socket layer initialized [ 0.275282] cfg80211: World regulatory domain updated: [ 0.275305] cfg80211: DFS Master region: unset [ 0.275316] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 0.275332] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 0.275347] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 0.275360] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 0.275373] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 0.275387] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 0.275400] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 0.275412] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 0.275425] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 0.277206] clocksource: Switched to clocksource arch_sys_counter [ 0.364868] FS-Cache: Loaded [ 0.384692] NET: Registered protocol family 2 [ 0.385941] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.386063] TCP bind hash table entries: 8192 (order: 5, 163840 bytes) [ 0.386418] TCP: Hash tables configured (established 8192 bind 8192) [ 0.386549] UDP hash table entries: 512 (order: 2, 24576 bytes) [ 0.386617] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes) [ 0.387024] NET: Registered protocol family 1 [ 0.387787] RPC: Registered named UNIX socket transport module. [ 0.387807] RPC: Registered udp transport module. [ 0.387817] RPC: Registered tcp transport module. [ 0.387826] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.542233] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.566006] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.567680] FS-Cache: Netfs 'nfs' registered for caching [ 0.568930] NFS: Registering the id_resolver key type [ 0.569007] Key type id_resolver registered [ 0.569018] Key type id_legacy registered [ 0.569054] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.569620] FS-Cache: Netfs 'cifs' registered for caching [ 0.572837] [ 0.572837] TEE Core Framework initialization (ver 1:0.1) [ 0.572889] TEE armv7 Driver initialization [ 0.573525] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0" [ 0.573546] TEE core: Alloc the misc device "opteearmtz00" (id=0) [ 0.574136] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=62) [ 0.581644] NET: Registered protocol family 38 [ 0.581703] Key type asymmetric registered [ 0.581725] Asymmetric key parser 'x509' registered [ 0.581862] bounce: pool size: 64 pages [ 0.582237] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.582592] io scheduler noop registered (default) [ 0.582615] io scheduler deadline registered [ 0.582907] io scheduler cfq registered [ 0.584381] phy phy-11000000.syscon:usb2-phy@760.0: Looking up phy-supply from device tree [ 0.584408] phy phy-11000000.syscon:usb2-phy@760.0: Looking up phy-supply property in node /syscon@11000000/usb2-phy@760/otg-port failed [ 0.584599] phy phy-11000000.syscon:usb2-phy@760.0: Looking up vbus-supply from device tree [ 0.584617] phy phy-11000000.syscon:usb2-phy@760.0: Looking up vbus-supply property in node /syscon@11000000/usb2-phy@760/otg-port failed [ 0.584639] phy phy-11000000.syscon:usb2-phy@760.0: Failed to get VBUS supply regulator [ 0.584820] phy phy-11000000.syscon:usb2-phy@760.1: Looking up phy-supply from device tree [ 0.584841] phy phy-11000000.syscon:usb2-phy@760.1: Looking up phy-supply property in node /syscon@11000000/usb2-phy@760/host-port failed [ 0.586237] phy phy-11000000.syscon:usb2-phy@800.2: Looking up phy-supply from device tree [ 0.586265] phy phy-11000000.syscon:usb2-phy@800.2: Looking up phy-supply property in node /syscon@11000000/usb2-phy@800/otg-port failed [ 0.586455] phy phy-11000000.syscon:usb2-phy@800.2: Looking up vbus-supply from device tree [ 0.586473] phy phy-11000000.syscon:usb2-phy@800.2: Looking up vbus-supply property in node /syscon@11000000/usb2-phy@800/otg-port failed [ 0.586494] phy phy-11000000.syscon:usb2-phy@800.2: Failed to get VBUS supply regulator [ 0.586688] phy phy-11000000.syscon:usb2-phy@800.3: Looking up phy-supply from device tree [ 0.586709] phy phy-11000000.syscon:usb2-phy@800.3: Looking up phy-supply property in node /syscon@11000000/usb2-phy@800/host-port failed [ 0.588645] phy phy-12030000.hdmi-phy.4: Looking up phy-supply from device tree [ 0.588674] phy phy-12030000.hdmi-phy.4: Looking up phy-supply property in node /hdmi-phy@12030000 failed [ 0.592525] iep: failed to find iep power down clock source. [ 0.593564] IEP Power ON [ 0.594080] IEP Power OFF [ 0.594222] IEP Driver loaded succesfully [ 0.594440] Module initialized. [ 0.594896] rk-vcodec 20020000.vpu-service: Looking up vcodec-supply from device tree [ 0.594919] rk-vcodec 20020000.vpu-service: Looking up vcodec-supply property in node /vpu-service@20020000 failed [ 0.594947] rk-vcodec 20020000.vpu-service: no regulator for vcodec [ 0.595491] rk-vcodec 20020000.vpu-service: probe device [ 0.596017] rk-vcodec 20020000.vpu-service: drm allocator with mmu enabled [ 0.598054] rk-vcodec 20020000.vpu-service: could not find power_model node [ 0.598107] rk-vcodec 20020000.vpu-service: init success [ 0.598476] rk-vcodec 20030000.rkvdec: Looking up vcodec-supply from device tree [ 0.598567] rk-vcodec 20030000.rkvdec: vcodec regulator not ready, retry [ 0.603738] dma-pl330 110f0000.pdma: Loaded driver for PL330 DMAC-241330 [ 0.603763] dma-pl330 110f0000.pdma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16 [ 0.605350] rockchip-system-monitor rockchip-system-monitor: system monitor probe [ 0.606050] pwm-regulator vdd-arm-regulator: GPIO lookup for consumer enable [ 0.606067] pwm-regulator vdd-arm-regulator: using device tree for GPIO lookup [ 0.606087] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/vdd-arm-regulator[0]' [ 0.606101] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/vdd-arm-regulator[0]' [ 0.606115] pwm-regulator vdd-arm-regulator: using lookup tables for GPIO lookup [ 0.606131] pwm-regulator vdd-arm-regulator: lookup for GPIO enable failed [ 0.606203] pwm-regulator vdd-arm-regulator: Looking up pwm-supply from device tree [ 0.606222] pwm-regulator vdd-arm-regulator: Looking up pwm-supply property in node /vdd-arm-regulator failed [ 0.606323] vdd_arm: 950 <--> 1400 mV at 950 mV [ 0.606696] pwm-regulator vdd-arm-regulator: Looking up pwm-supply from device tree [ 0.606717] pwm-regulator vdd-arm-regulator: Looking up pwm-supply property in node /vdd-arm-regulator failed [ 0.606850] pwm-regulator vdd-arm-regulator: Looking up pwm-supply from device tree [ 0.606869] pwm-regulator vdd-arm-regulator: Looking up pwm-supply property in node /vdd-arm-regulator failed [ 0.607046] pwm-regulator vdd-log-regulator: GPIO lookup for consumer enable [ 0.607062] pwm-regulator vdd-log-regulator: using device tree for GPIO lookup [ 0.607078] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/vdd-log-regulator[0]' [ 0.607092] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/vdd-log-regulator[0]' [ 0.607105] pwm-regulator vdd-log-regulator: using lookup tables for GPIO lookup [ 0.607119] pwm-regulator vdd-log-regulator: lookup for GPIO enable failed [ 0.607158] pwm-regulator vdd-log-regulator: Looking up pwm-supply from device tree [ 0.607266] pwm-regulator vdd-log-regulator: Looking up pwm-supply property in node /vdd-log-regulator failed [ 0.607346] vdd_log: 1000 <--> 1300 mV at 1000 mV [ 0.607737] pwm-regulator vdd-log-regulator: Looking up pwm-supply from device tree [ 0.607758] pwm-regulator vdd-log-regulator: Looking up pwm-supply property in node /vdd-log-regulator failed [ 0.607865] pwm-regulator vdd-arm-regulator: Looking up pwm-supply from device tree [ 0.607885] pwm-regulator vdd-arm-regulator: Looking up pwm-supply property in node /vdd-arm-regulator failed [ 0.607906] pwm-regulator vdd-log-regulator: Looking up pwm-supply from device tree [ 0.607922] pwm-regulator vdd-log-regulator: Looking up pwm-supply property in node /vdd-log-regulator failed [ 0.608849] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled [ 0.609872] 11030000.serial: ttyS2 at MMIO 0x11030000 (irq = 31, base_baud = 1500000) is a 16550A [ 0.614072] console [ttyS2] enabled [ 0.616546] [drm] Initialized drm 1.1.0 20060810 [ 0.619328] [drm] Rockchip DRM driver version: v1.0.1 [ 0.619938] rockchip-drm display-subsystem: devfreq is not set [ 0.621025] rockchip-drm display-subsystem: bound 20050000.vop (ops 0xc0b7461c) [ 0.621511] i2c i2c-0: of_i2c: modalias failure on /hdmi@200a0000/ports [ 0.622149] dwhdmi-rockchip 200a0000.hdmi: registered DesignWare HDMI I2C bus driver [ 0.622277] dwhdmi-rockchip 200a0000.hdmi: Detected HDMI TX controller v2.01a with HDCP (inno_dw_hdmi_phy) [ 0.624061] rockchip-drm display-subsystem: bound 200a0000.hdmi (ops 0xc0b6cce0) [ 0.624327] [drm] forcing TV-1 connector OFF [ 0.624360] rockchip-drm display-subsystem: bound 20053e00.tve (ops 0xc0b74650) [ 0.624377] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 0.624385] [drm] No driver support for vblank timestamp query. [ 0.624542] rockchip-drm display-subsystem: failed to parse display resources [ 1.251241] rockchip-vop 20050000.vop: [drm:vop_crtc_enable] Update mode to 1920x1080p50, type: 11 [ 1.252058] dwhdmi-rockchip 200a0000.hdmi: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 [ 1.252067] dwhdmi-rockchip 200a0000.hdmi: colorspace: RGB [ 1.252074] dwhdmi-rockchip 200a0000.hdmi: scan mode: Underscan [ 1.252081] dwhdmi-rockchip 200a0000.hdmi: colorimetry: No Data [ 1.252088] dwhdmi-rockchip 200a0000.hdmi: picture aspect: 16:9 [ 1.252096] dwhdmi-rockchip 200a0000.hdmi: active aspect: Same as Picture [ 1.252102] dwhdmi-rockchip 200a0000.hdmi: itc: IT Content [ 1.252109] dwhdmi-rockchip 200a0000.hdmi: extended colorimetry: xvYCC 601 [ 1.252117] dwhdmi-rockchip 200a0000.hdmi: quantization range: Full [ 1.252124] dwhdmi-rockchip 200a0000.hdmi: nups: Unknown Non-uniform Scaling [ 1.252131] dwhdmi-rockchip 200a0000.hdmi: video code: 31 [ 1.252138] dwhdmi-rockchip 200a0000.hdmi: ycc quantization range: Full [ 1.252145] dwhdmi-rockchip 200a0000.hdmi: hdmi content type: Graphics [ 1.252152] dwhdmi-rockchip 200a0000.hdmi: pixel repeat: 0 [ 1.252161] dwhdmi-rockchip 200a0000.hdmi: bar top 0, bottom 0, left 0, right 0 [ 1.341270] Console: switching to colour frame buffer device 240x67 [ 1.401354] rockchip-drm display-subsystem: fb0: frame buffer device [ 1.450667] brd: module loaded [ 1.467111] loop: module loaded [ 1.467885] lkdtm: No crash points registered, enable through debugfs [ 1.468153] Loading iSCSI transport class v2.0-870. [ 1.469131] iscsi: registered transport (tcp) [ 1.472100] rk_gmac-dwmac 30200000.ethernet: Looking up phy-supply from device tree [ 1.472318] rk_gmac-dwmac 30200000.ethernet: clock input or output? (output). [ 1.472344] rk_gmac-dwmac 30200000.ethernet: TX delay(0x26). [ 1.472361] rk_gmac-dwmac 30200000.ethernet: RX delay(0x11). [ 1.472424] rk_gmac-dwmac 30200000.ethernet: integrated PHY? (yes). [ 1.472639] rk_gmac-dwmac 30200000.ethernet: cannot get clock clk_mac_speed [ 1.478702] rk_gmac-dwmac 30200000.ethernet: init for RMII [ 1.510760] stmmac - user ID: 0x10, Synopsys ID: 0x35 [ 1.510773] Ring mode enabled [ 1.510784] DMA HW capability register supported [ 1.510793] Normal descriptors [ 1.510802] RX Checksum Offload Engine supported (type 2) [ 1.510810] TX Checksum insertion supported [ 1.510818] Wake-Up On Lan supported [ 1.510935] Enable RX Mitigation via HW Watchdog Timer [ 1.511189] of_get_named_gpiod_flags: can't parse 'snps,reset-gpio' property of node '/ethernet@30200000[0]' [ 1.534977] libphy: stmmac: probed [ 1.535007] eth%d: PHY ID 1234d400 at 0 IRQ POLL (stmmac-0:00) active [ 1.535021] eth%d: PHY ID 00000000 at 1 IRQ POLL (stmmac-0:01) [ 1.535034] eth%d: PHY ID 00000000 at 2 IRQ POLL (stmmac-0:02) [ 1.535047] eth%d: PHY ID 00000000 at 3 IRQ POLL (stmmac-0:03) [ 1.535059] eth%d: PHY ID 00000000 at 4 IRQ POLL (stmmac-0:04) [ 1.535071] eth%d: PHY ID 00000000 at 5 IRQ POLL (stmmac-0:05) [ 1.535083] eth%d: PHY ID 00000000 at 6 IRQ POLL (stmmac-0:06) [ 1.535094] eth%d: PHY ID 00000000 at 7 IRQ POLL (stmmac-0:07) [ 1.535106] eth%d: PHY ID 00000000 at 8 IRQ POLL (stmmac-0:08) [ 1.535118] eth%d: PHY ID 00000000 at 9 IRQ POLL (stmmac-0:09) [ 1.535130] eth%d: PHY ID 00000000 at 10 IRQ POLL (stmmac-0:0a) [ 1.535141] eth%d: PHY ID 00000000 at 11 IRQ POLL (stmmac-0:0b) [ 1.535154] eth%d: PHY ID 00000000 at 12 IRQ POLL (stmmac-0:0c) [ 1.535166] eth%d: PHY ID 00000000 at 13 IRQ POLL (stmmac-0:0d) [ 1.535177] eth%d: PHY ID 00000000 at 14 IRQ POLL (stmmac-0:0e) [ 1.535190] eth%d: PHY ID 00000000 at 15 IRQ POLL (stmmac-0:0f) [ 1.535202] eth%d: PHY ID 00000000 at 16 IRQ POLL (stmmac-0:10) [ 1.535213] eth%d: PHY ID 00000000 at 17 IRQ POLL (stmmac-0:11) [ 1.535226] eth%d: PHY ID 00000000 at 18 IRQ POLL (stmmac-0:12) [ 1.535238] eth%d: PHY ID 00000000 at 19 IRQ POLL (stmmac-0:13) [ 1.535249] eth%d: PHY ID 00000000 at 20 IRQ POLL (stmmac-0:14) [ 1.535265] eth%d: PHY ID 00000000 at 21 IRQ POLL (stmmac-0:15) [ 1.535276] eth%d: PHY ID 00000000 at 22 IRQ POLL (stmmac-0:16) [ 1.535288] eth%d: PHY ID 00000000 at 23 IRQ POLL (stmmac-0:17) [ 1.535300] eth%d: PHY ID 00000000 at 24 IRQ POLL (stmmac-0:18) [ 1.535311] eth%d: PHY ID 00000000 at 25 IRQ POLL (stmmac-0:19) [ 1.535323] eth%d: PHY ID 00000000 at 26 IRQ POLL (stmmac-0:1a) [ 1.535334] eth%d: PHY ID 00000000 at 27 IRQ POLL (stmmac-0:1b) [ 1.535345] eth%d: PHY ID 00000000 at 28 IRQ POLL (stmmac-0:1c) [ 1.535356] eth%d: PHY ID 00000000 at 29 IRQ POLL (stmmac-0:1d) [ 1.535368] eth%d: PHY ID 00000000 at 30 IRQ POLL (stmmac-0:1e) [ 1.535380] eth%d: PHY ID 00000000 at 31 IRQ POLL (stmmac-0:1f) [ 1.537647] usbcore: registered new interface driver rndis_wlan [ 1.538233] Rockchip WiFi SYS interface (V1.00) ... [ 1.538483] usbcore: registered new interface driver rtl8150 [ 1.538577] usbcore: registered new interface driver r8152 [ 1.538690] usbcore: registered new interface driver asix [ 1.538778] usbcore: registered new interface driver ax88179_178a [ 1.538863] usbcore: registered new interface driver cdc_ether [ 1.538977] usbcore: registered new interface driver rndis_host [ 1.539147] usbcore: registered new interface driver cdc_ncm [ 1.539240] usbcore: registered new interface driver cdc_mbim [ 1.539976] dwc2 30040000.usb: Looking up vusb_d-supply from device tree [ 1.540003] dwc2 30040000.usb: Looking up vusb_d-supply property in node /usb@30040000 failed [ 1.540034] 30040000.usb supply vusb_d not found, using dummy regulator [ 1.540177] dwc2 30040000.usb: Looking up vusb_a-supply from device tree [ 1.540199] dwc2 30040000.usb: Looking up vusb_a-supply property in node /usb@30040000 failed [ 1.540216] 30040000.usb supply vusb_a not found, using dummy regulator [ 1.540702] dwc2 30040000.usb: Looking up vbus-supply from device tree [ 1.555267] dwc2 30040000.usb: DWC OTG Controller [ 1.555333] dwc2 30040000.usb: new USB bus registered, assigned bus number 1 [ 1.555424] dwc2 30040000.usb: irq 50, io mem 0x30040000 [ 1.555936] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.555954] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.555971] usb usb1: Product: DWC OTG Controller [ 1.555985] usb usb1: Manufacturer: Linux 4.4.194 dwc2_hsotg [ 1.555997] usb usb1: SerialNumber: 30040000.usb [ 1.557613] hub 1-0:1.0: USB hub found [ 1.557754] hub 1-0:1.0: 1 port detected [ 1.559928] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.559977] ehci-platform: EHCI generic platform driver [ 1.563002] ehci-platform 30080000.usb: EHCI Host Controller [ 1.563528] ehci-platform 30080000.usb: new USB bus registered, assigned bus number 2 [ 1.564184] ehci-platform 30080000.usb: irq 51, io mem 0x30080000 [ 1.573904] ehci-platform 30080000.usb: USB 2.0 started, EHCI 1.00 [ 1.574431] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.574453] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.574467] usb usb2: Product: EHCI Host Controller [ 1.574480] usb usb2: Manufacturer: Linux 4.4.194 ehci_hcd [ 1.574493] usb usb2: SerialNumber: 30080000.usb [ 1.575832] hub 2-0:1.0: USB hub found [ 1.575931] hub 2-0:1.0: 1 port detected [ 1.579195] ehci-platform 300c0000.usb: EHCI Host Controller [ 1.579727] ehci-platform 300c0000.usb: new USB bus registered, assigned bus number 3 [ 1.580266] ehci-platform 300c0000.usb: irq 53, io mem 0x300c0000 [ 1.587273] ehci-platform 300c0000.usb: USB 2.0 started, EHCI 1.00 [ 1.587828] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.587847] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.587864] usb usb3: Product: EHCI Host Controller [ 1.587877] usb usb3: Manufacturer: Linux 4.4.194 ehci_hcd [ 1.587889] usb usb3: SerialNumber: 300c0000.usb [ 1.589262] hub 3-0:1.0: USB hub found [ 1.589366] hub 3-0:1.0: 1 port detected [ 1.592720] ehci-platform 30100000.usb: EHCI Host Controller [ 1.593253] ehci-platform 30100000.usb: new USB bus registered, assigned bus number 4 [ 1.593764] ehci-platform 30100000.usb: irq 55, io mem 0x30100000 [ 1.600585] ehci-platform 30100000.usb: USB 2.0 started, EHCI 1.00 [ 1.601130] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.601148] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.601162] usb usb4: Product: EHCI Host Controller [ 1.601176] usb usb4: Manufacturer: Linux 4.4.194 ehci_hcd [ 1.601188] usb usb4: SerialNumber: 30100000.usb [ 1.602464] hub 4-0:1.0: USB hub found [ 1.602569] hub 4-0:1.0: 1 port detected [ 1.603605] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.603665] ohci-platform: OHCI generic platform driver [ 1.604471] ohci-platform 300a0000.usb: Generic Platform OHCI controller [ 1.605081] ohci-platform 300a0000.usb: new USB bus registered, assigned bus number 5 [ 1.605482] ohci-platform 300a0000.usb: irq 52, io mem 0x300a0000 [ 1.661826] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.661848] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.661863] usb usb5: Product: Generic Platform OHCI controller [ 1.661876] usb usb5: Manufacturer: Linux 4.4.194 ohci_hcd [ 1.661889] usb usb5: SerialNumber: 300a0000.usb [ 1.663319] hub 5-0:1.0: USB hub found [ 1.663441] hub 5-0:1.0: 1 port detected [ 1.664793] ohci-platform 300e0000.usb: Generic Platform OHCI controller [ 1.665439] ohci-platform 300e0000.usb: new USB bus registered, assigned bus number 6 [ 1.665845] ohci-platform 300e0000.usb: irq 54, io mem 0x300e0000 [ 1.721592] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.721617] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.721631] usb usb6: Product: Generic Platform OHCI controller [ 1.721643] usb usb6: Manufacturer: Linux 4.4.194 ohci_hcd [ 1.721659] usb usb6: SerialNumber: 300e0000.usb [ 1.723008] hub 6-0:1.0: USB hub found [ 1.723104] hub 6-0:1.0: 1 port detected [ 1.724382] ohci-platform 30120000.usb: Generic Platform OHCI controller [ 1.724942] ohci-platform 30120000.usb: new USB bus registered, assigned bus number 7 [ 1.725334] ohci-platform 30120000.usb: irq 56, io mem 0x30120000 [ 1.781611] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.781633] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.781648] usb usb7: Product: Generic Platform OHCI controller [ 1.781661] usb usb7: Manufacturer: Linux 4.4.194 ohci_hcd [ 1.781675] usb usb7: SerialNumber: 30120000.usb [ 1.783001] hub 7-0:1.0: USB hub found [ 1.783100] hub 7-0:1.0: 1 port detected [ 1.784455] usbcore: registered new interface driver cdc_acm [ 1.784474] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.784594] usbcore: registered new interface driver cdc_wdm [ 1.784710] usbcore: registered new interface driver uas [ 1.785058] usbcore: registered new interface driver usb-storage [ 1.785269] usbcore: registered new interface driver usbserial [ 1.785358] usbcore: registered new interface driver usbserial_generic [ 1.785464] usbserial: USB Serial support registered for generic [ 1.785578] usbcore: registered new interface driver cp210x [ 1.785644] usbserial: USB Serial support registered for cp210x [ 1.785841] usbcore: registered new interface driver ftdi_sio [ 1.785906] usbserial: USB Serial support registered for FTDI USB Serial Device [ 1.786427] usbcore: registered new interface driver keyspan [ 1.786496] usbserial: USB Serial support registered for Keyspan - (without firmware) [ 1.786566] usbserial: USB Serial support registered for Keyspan 1 port adapter [ 1.786634] usbserial: USB Serial support registered for Keyspan 2 port adapter [ 1.786695] usbserial: USB Serial support registered for Keyspan 4 port adapter [ 1.786817] usbcore: registered new interface driver option [ 1.786904] usbserial: USB Serial support registered for GSM modem (1-port) [ 1.788440] usbcore: registered new interface driver oti6858 [ 1.788562] usbserial: USB Serial support registered for oti6858 [ 1.788701] usbcore: registered new interface driver pl2303 [ 1.788770] usbserial: USB Serial support registered for pl2303 [ 1.788913] usbcore: registered new interface driver qcserial [ 1.788982] usbserial: USB Serial support registered for Qualcomm USB modem [ 1.789146] usbcore: registered new interface driver sierra [ 1.789213] usbserial: USB Serial support registered for Sierra USB modem [ 1.789279] usb20_otg: version 3.10a 21-DEC-2012 [ 1.789962] usb20_host: version 3.10a 21-DEC-2012 [ 1.791691] usbcore: registered new interface driver iforce [ 1.791865] usbcore: registered new interface driver xpad [ 1.792190] usbcore: registered new interface driver usbtouchscreen [ 1.792663] .. rk pwm remotectl v1.1 init [ 1.794184] input: 110b0030.pwm as /devices/platform/110b0030.pwm/input/input0 [ 1.796939] i2c /dev entries driver [ 1.799201] rockchip-iodomain 11000000.syscon:io-domains: Looking up vccio1-supply from device tree [ 1.799480] rockchip-iodomain 11000000.syscon:io-domains: Looking up vccio2-supply from device tree [ 1.799677] rockchip-iodomain 11000000.syscon:io-domains: Looking up vccio3-supply from device tree [ 1.799701] rockchip-iodomain 11000000.syscon:io-domains: Looking up vccio3-supply property in node /syscon@11000000/io-domains failed [ 1.799737] rockchip-iodomain 11000000.syscon:io-domains: Looking up vccio4-supply from device tree [ 1.801556] Boot mode: normal [ 1.803372] rockchip-thermal 11150000.tsadc: tsadc is probed successfully! [ 1.804458] Bluetooth: Virtual HCI driver ver 1.5 [ 1.804923] Bluetooth: HCI UART driver ver 2.3 [ 1.804946] Bluetooth: HCI UART protocol H4 registered [ 1.804956] Bluetooth: HCI UART protocol LL registered [ 1.804967] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 1.805194] usbcore: registered new interface driver bfusb [ 1.805350] usbcore: registered new interface driver btusb [ 1.805371] rtk_btusb: RTKBT_RELEASE_NAME: 20180702_BT_ANDROID_8.1 [ 1.805381] rtk_btusb: Realtek Bluetooth USB driver module init, version 4.1.5 [ 1.805390] rtk_btusb: Register usb char device interface for BT driver [ 1.805913] usbcore: registered new interface driver rtk_btusb [ 1.805946] Bluetooth: Generic Bluetooth SDIO driver ver 0.1 [ 1.806881] cpu cpu0: leakage=3 [ 1.806920] cpu cpu0: leakage-volt-sel=0 [ 1.806975] cpu cpu0: Looking up cpu-supply from device tree [ 1.807093] pwm-regulator vdd-arm-regulator: Looking up pwm-supply from device tree [ 1.807116] pwm-regulator vdd-arm-regulator: Looking up pwm-supply property in node /vdd-arm-regulator failed [ 1.807405] cpu cpu0: Failed to get pvtm [ 1.808708] cpu cpu0: Looking up cpu-supply from device tree [ 1.808808] pwm-regulator vdd-arm-regulator: Looking up pwm-supply from device tree [ 1.808829] pwm-regulator vdd-arm-regulator: Looking up pwm-supply property in node /vdd-arm-regulator failed [ 1.809158] cpu cpu0: Looking up cpu-supply from device tree [ 1.809221] pwm-regulator vdd-arm-regulator: Looking up pwm-supply from device tree [ 1.809239] pwm-regulator vdd-arm-regulator: Looking up pwm-supply property in node /vdd-arm-regulator failed [ 1.810079] cpu cpu0: avs=0 [ 1.810183] cpu cpu0: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 [ 1.810209] cpu cpu0: failed to read out thermal zone (-22) [ 1.811896] cpu cpu0: failed to find power_model node [ 1.813538] pwrseq_simple sdio-pwrseq: GPIO lookup for consumer reset [ 1.813558] pwrseq_simple sdio-pwrseq: using device tree for GPIO lookup [ 1.813590] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/sdio-pwrseq[0]' - status (0) [ 1.814034] Synopsys Designware Multimedia Card Interface Driver [ 1.815018] dwmmc_rockchip 30000000.dwmmc: IDMAC supports 32-bit address mode. [ 1.815215] dwmmc_rockchip 30000000.dwmmc: Using internal DMA controller. [ 1.815236] dwmmc_rockchip 30000000.dwmmc: Version ID is 270a [ 1.815332] dwmmc_rockchip 30000000.dwmmc: DW MMC controller at irq 47,32 bit host data width,256 deep fifo [ 1.815394] dwmmc_rockchip 30000000.dwmmc: Looking up vmmc-supply from device tree [ 1.815410] dwmmc_rockchip 30000000.dwmmc: Looking up vmmc-supply property in node /dwmmc@30000000 failed [ 1.815446] dwmmc_rockchip 30000000.dwmmc: Looking up vqmmc-supply from device tree [ 1.815459] dwmmc_rockchip 30000000.dwmmc: Looking up vqmmc-supply property in node /dwmmc@30000000 failed [ 1.815474] dwmmc_rockchip 30000000.dwmmc: No vmmc regulator found [ 1.815483] dwmmc_rockchip 30000000.dwmmc: No vqmmc regulator found [ 1.815515] dwmmc_rockchip 30000000.dwmmc: GPIO lookup for consumer cd [ 1.815524] dwmmc_rockchip 30000000.dwmmc: using device tree for GPIO lookup [ 1.815572] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/dwmmc@30000000[0]' - status (0) [ 1.815636] gpio-49 (cd): gpiod_set_debounce: missing set() or set_debounce() operations [ 1.815647] dwmmc_rockchip 30000000.dwmmc: Got CD GPIO [ 1.815659] dwmmc_rockchip 30000000.dwmmc: GPIO lookup for consumer wp [ 1.815669] dwmmc_rockchip 30000000.dwmmc: using device tree for GPIO lookup [ 1.815680] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@30000000[0]' [ 1.815690] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@30000000[0]' [ 1.815699] dwmmc_rockchip 30000000.dwmmc: using lookup tables for GPIO lookup [ 1.815711] dwmmc_rockchip 30000000.dwmmc: lookup for GPIO wp failed [ 1.828715] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 1.841323] dwmmc_rockchip 30000000.dwmmc: 1 slots initialized [ 1.841920] dwmmc_rockchip 30010000.dwmmc: num-slots property not found, assuming 1 slot is available [ 1.842047] dwmmc_rockchip 30010000.dwmmc: IDMAC supports 32-bit address mode. [ 1.842222] dwmmc_rockchip 30010000.dwmmc: Using internal DMA controller. [ 1.842246] dwmmc_rockchip 30010000.dwmmc: Version ID is 270a [ 1.842329] dwmmc_rockchip 30010000.dwmmc: DW MMC controller at irq 48,32 bit host data width,256 deep fifo [ 1.842379] dwmmc_rockchip 30010000.dwmmc: Looking up vmmc-supply from device tree [ 1.842393] dwmmc_rockchip 30010000.dwmmc: Looking up vmmc-supply property in node /dwmmc@30010000 failed [ 1.842423] dwmmc_rockchip 30010000.dwmmc: Looking up vqmmc-supply from device tree [ 1.842436] dwmmc_rockchip 30010000.dwmmc: Looking up vqmmc-supply property in node /dwmmc@30010000 failed [ 1.842450] dwmmc_rockchip 30010000.dwmmc: No vmmc regulator found [ 1.842459] dwmmc_rockchip 30010000.dwmmc: No vqmmc regulator found [ 1.842620] dwmmc_rockchip 30010000.dwmmc: GPIO lookup for consumer wp [ 1.842633] dwmmc_rockchip 30010000.dwmmc: using device tree for GPIO lookup [ 1.842648] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@30010000[0]' [ 1.842660] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@30010000[0]' [ 1.842672] dwmmc_rockchip 30010000.dwmmc: using lookup tables for GPIO lookup [ 1.842683] dwmmc_rockchip 30010000.dwmmc: lookup for GPIO wp failed [ 1.842799] dwmmc_rockchip 30010000.dwmmc: allocated mmc-pwrseq [ 1.855772] mmc_host mmc1: Bus speed (slot 0) = 2343750Hz (slot req 400000Hz, actual 390625HZ div = 3) [ 1.868466] dwmmc_rockchip 30010000.dwmmc: 1 slots initialized [ 1.869199] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_blue[0]' - status (0) [ 1.869519] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_red[0]' - status (0) [ 1.869866] ledtrig-cpu: registered to indicate activity on CPUs [ 1.873717] rk-crypto 100a0000.cypto-controller: Crypto Accelerator successfully registered [ 1.874904] hidraw: raw HID events driver (C) Jiri Kosina [ 1.879672] usbcore: registered new interface driver usbhid [ 1.879698] usbhid: USB HID core driver [ 1.882143] rockchip-dmc dmc: failed to get the count of devfreq-event in /dmc node [ 1.883343] rockchip-dmc dmc: Looking up center-supply from device tree [ 1.883516] pwm-regulator vdd-log-regulator: Looking up pwm-supply from device tree [ 1.883546] pwm-regulator vdd-log-regulator: Looking up pwm-supply property in node /vdd-log-regulator failed [ 1.891881] rockchip-dmc dmc: leakage=2 [ 1.891927] rockchip-dmc dmc: leakage-volt-sel=0 [ 1.891983] rockchip-dmc dmc: Looking up center-supply from device tree [ 1.892153] pwm-regulator vdd-log-regulator: Looking up pwm-supply from device tree [ 1.892183] pwm-regulator vdd-log-regulator: Looking up pwm-supply property in node /vdd-log-regulator failed [ 1.892258] vdd_log: could not add device link dmc err -17 [ 1.892296] vdd_log: Failed to create debugfs directory [ 1.892325] rockchip-dmc dmc: Failed to get pvtm [ 1.894731] rockchip-dmc dmc: avs=0 [ 1.894850] rockchip-dmc dmc: failed to get vop bandwidth to dmc rate [ 1.895865] rockchip-dmc dmc: failed to get vop pn to msch rl [ 1.897529] rockchip-dmc dmc: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 [ 1.913545] rknandbase v1.2 2018-05-08 [ 1.914423] rknand 30030000.nandc: rknand_probe clk rate = 150000000 [ 1.914649] No.1 FLASH ID:89 64 64 3c a1 c [ 1.917875] No.1 FLASH ID:89 64 64 3c a1 c [ 1.919236] FlashLoadPhyInfo fail 400!! [ 1.921038] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 1.921117] mmc0: new high speed SDHC card at address aaaa [ 1.921906] mmcblk0: mmc0:aaaa SB16G 14.8 GiB [ 1.924350] mmcblk0: p1 p2 [ 1.927931] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 1.928954] mmc1: new high speed SDIO card at address 0001 [ 1.935746] ECC:60 [ 1.935765] FTL version: 5.0.57 20190828 [ 1.976058] ...FtlInit FtlSysBlkInit error ,format device! [ 1.976070] ftl_init 0 [ 1.976574] ------------[ cut here ]------------ [ 1.976600] WARNING: CPU: 0 PID: 1 at fs/proc/generic.c:345 proc_register+0xe4/0x104() [ 1.976608] proc_dir_entry '/proc/mtd' already registered [ 1.976615] Modules linked in: [ 1.976631] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.194 #1 [ 1.976640] Hardware name: Generic DT based system [ 1.976671] [] (unwind_backtrace) from [] (show_stack+0x20/0x24) [ 1.976691] [] (show_stack) from [] (dump_stack+0x84/0xa4) [ 1.976710] [] (dump_stack) from [] (warn_slowpath_common+0x98/0xc4) [ 1.976727] [] (warn_slowpath_common) from [] (warn_slowpath_fmt+0x40/0x48) [ 1.976744] [] (warn_slowpath_fmt) from [] (proc_register+0xe4/0x104) [ 1.976760] [] (proc_register) from [] (proc_create_data+0xa4/0xc0) [ 1.976777] [] (proc_create_data) from [] (rknand_dev_init+0x360/0x3d0) [ 1.976796] [] (rknand_dev_init) from [] (rknand_driver_init+0x30/0x40) [ 1.976811] [] (rknand_driver_init) from [] (do_one_initcall+0x1b4/0x1ec) [ 1.976830] [] (do_one_initcall) from [] (kernel_init_freeable+0x214/0x260) [ 1.976847] [] (kernel_init_freeable) from [] (kernel_init+0x18/0x118) [ 1.976865] [] (kernel_init) from [] (ret_from_fork+0x14/0x2c) [ 1.976900] ---[ end trace 27e51dc6ae5da1b1 ]--- [ 1.977247] rknand vendor storage init failed ! [ 1.978844] rk3228-codec 12010000.codec: GPIO lookup for consumer spk-en [ 1.978860] rk3228-codec 12010000.codec: using device tree for GPIO lookup [ 1.978873] of_get_named_gpiod_flags: can't parse 'spk-en-gpios' property of node '/codec@12010000[0]' [ 1.978903] of_get_named_gpiod_flags: parsed 'spk-en-gpio' property of node '/codec@12010000[0]' - status (0) [ 1.978956] rk3228-codec 12010000.codec: spk_depop_time use default value. [ 1.984382] NET: Registered protocol family 10 [ 1.985587] NET: Registered protocol family 17 [ 1.985776] Bluetooth: RFCOMM socket layer initialized [ 1.985815] Bluetooth: RFCOMM ver 1.11 [ 1.985844] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.985861] Bluetooth: HIDP socket layer initialized [ 1.986121] [WLAN_RFKILL]: Enter rfkill_wlan_init [ 1.986359] [WLAN_RFKILL]: Enter rfkill_wlan_probe [ 1.986382] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = [00] [ 1.986390] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control. [ 1.986399] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio. [ 1.986411] of_get_named_gpiod_flags: can't parse 'WIFI,poweren_gpio' property of node '/wireless-wlan[0]' [ 1.986420] of_get_named_gpiod_flags: can't parse 'WIFI,vbat_gpio' property of node '/wireless-wlan[0]' [ 1.986431] of_get_named_gpiod_flags: can't parse 'WIFI,reset_gpio' property of node '/wireless-wlan[0]' [ 1.986470] of_get_named_gpiod_flags: parsed 'WIFI,host_wake_irq' property of node '/wireless-wlan[0]' - status (0) [ 1.986478] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 28, flags = 0. [ 1.986493] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found ! [ 1.986501] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio [ 1.986514] [WLAN_RFKILL]: Exit rfkill_wlan_probe [ 1.986590] [BT_RFKILL]: Enter rfkill_rk_init [ 1.986839] Key type dns_resolver registered [ 1.987480] ThumbEE CPU extension supported. [ 1.987515] Registering SWP/SWPB emulation handler [ 1.988479] registered taskstats version 1 [ 1.989577] rga2: Driver loaded successfully ver:4.01 [ 1.989786] rga2: Module initialized. [ 1.989818] pvtm list NULL [ 1.990382] rk-vcodec 20030000.rkvdec: Looking up vcodec-supply from device tree [ 1.990453] pwm-regulator vdd-log-regulator: Looking up pwm-supply from device tree [ 1.990469] pwm-regulator vdd-log-regulator: Looking up pwm-supply property in node /vdd-log-regulator failed [ 1.991086] rk-vcodec 20030000.rkvdec: leakage=2 [ 1.991112] rk-vcodec 20030000.rkvdec: leakage-volt-sel=0 [ 1.991135] rk-vcodec 20030000.rkvdec: Looking up vcodec-supply from device tree [ 1.991183] pwm-regulator vdd-log-regulator: Looking up pwm-supply from device tree [ 1.991197] pwm-regulator vdd-log-regulator: Looking up pwm-supply property in node /vdd-log-regulator failed [ 1.991235] vdd_log: could not add device link 20030000.rkvdec err -17 [ 1.991255] vdd_log: Failed to create debugfs directory [ 1.991270] rk-vcodec 20030000.rkvdec: Failed to get pvtm [ 1.992256] rk-vcodec 20030000.rkvdec: avs=0 [ 1.992520] rk-vcodec 20030000.rkvdec: probe device [ 1.992968] rk-vcodec 20030000.rkvdec: drm allocator with mmu enabled [ 1.994262] rk-vcodec 20030000.rkvdec: init success [ 1.994852] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/sound[0]' [ 1.994866] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/sound[0]' [ 2.016350] asoc-simple-card sound: rk3228-hifi <-> 100b0000.i2s1 mapping ok [ 2.018254] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/hdmi-sound[0]' [ 2.018272] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/hdmi-sound[0]' [ 2.019227] asoc-simple-card hdmi-sound: i2s-hifi <-> 100c0000.i2s0 mapping ok [ 2.020786] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/spdif-sound[0]' [ 2.020802] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/spdif-sound[0]' [ 2.022164] asoc-simple-card spdif-sound: dit-hifi <-> 100d0000.spdif mapping ok [ 2.023350] console [netcon0] enabled [ 2.023361] netconsole: network logging started [ 2.023913] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio_keys/power-key[0]' - status (0) [ 2.024004] gpio-121 (GPIO Key Power): gpiod_set_debounce: missing set() or set_debounce() operations [ 2.024362] input: gpio_keys as /devices/platform/gpio_keys/input/input1 [ 2.024943] hctosys: unable to open rtc device (rtc0) [ 2.025489] boost_debug_init: failed to lookup clk dentry [ 2.026155] vcc_host: disabling [ 2.026246] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 417; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '09:50:33', on 'Jan 12 2022'. [ 2.026456] mali-utgard 20001000.gpu: mali_platform_device->num_resources = 13 [ 2.026470] mali-utgard 20001000.gpu: resource[0].start = 0x0x20001000 [ 2.026481] mali-utgard 20001000.gpu: resource[1].start = 0x0x20000000 [ 2.026491] mali-utgard 20001000.gpu: resource[2].start = 0x0x20003000 [ 2.026501] mali-utgard 20001000.gpu: resource[3].start = 0x0x20008000 [ 2.026511] mali-utgard 20001000.gpu: resource[4].start = 0x0x20004000 [ 2.026521] mali-utgard 20001000.gpu: resource[5].start = 0x0x2000a000 [ 2.026532] mali-utgard 20001000.gpu: resource[6].start = 0x0x20005000 [ 2.026542] mali-utgard 20001000.gpu: resource[7].start = 0x0x00000022 [ 2.026552] mali-utgard 20001000.gpu: resource[8].start = 0x0x00000023 [ 2.026562] mali-utgard 20001000.gpu: resource[9].start = 0x0x00000024 [ 2.026572] mali-utgard 20001000.gpu: resource[10].start = 0x0x00000023 [ 2.026581] mali-utgard 20001000.gpu: resource[11].start = 0x0x00000024 [ 2.026592] mali-utgard 20001000.gpu: resource[12].start = 0x0x00000023 [ 2.026602] D : [File] : drivers/gpu/arm/mali400/mali/platform/rk/rk.c; [Line] : 623; [Func] : mali_platform_device_init(); to add platform_specific_data to platform_device_of_mali. [ 2.026655] mali-utgard 20001000.gpu: Looking up mali-supply from device tree [ 2.026728] pwm-regulator vdd-log-regulator: Looking up pwm-supply from device tree [ 2.026742] pwm-regulator vdd-log-regulator: Looking up pwm-supply property in node /vdd-log-regulator failed [ 2.026879] mali-utgard 20001000.gpu: leakage=2 [ 2.026901] mali-utgard 20001000.gpu: leakage-volt-sel=0 [ 2.026928] mali-utgard 20001000.gpu: Looking up mali-supply from device tree [ 2.026963] pwm-regulator vdd-log-regulator: Looking up pwm-supply from device tree [ 2.026977] pwm-regulator vdd-log-regulator: Looking up pwm-supply property in node /vdd-log-regulator failed [ 2.027007] vdd_log: could not add device link 20001000.gpu err -17 [ 2.027021] vdd_log: Failed to create debugfs directory [ 2.027034] mali-utgard 20001000.gpu: Failed to get pvtm [ 2.028093] mali-utgard 20001000.gpu: avs=0 [ 2.028380] mali-utgard 20001000.gpu: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 [ 2.030734] Mali: Mali device driver loaded [ 2.030949] ALSA device list: [ 2.030959] #0: ROCKCHIP,RK3229 [ 2.030966] #1: HDMI [ 2.030971] #2: ROCKCHIP,SPDIF [ 2.034287] Freeing unused kernel memory: 3072K [ 2.080669] usb 6-1: new low-speed USB device number 2 using ohci-platform [ 2.178476] Checking disk(s): UUID=1201-5629 UUID=9dd04483-0fbd-438e-b246-a95c9a62de36 [ 2.272328] usb 6-1: New USB device found, idVendor=413c, idProduct=2107 [ 2.272353] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.272367] usb 6-1: Product: Dell USB Entry Keyboard [ 2.272380] usb 6-1: Manufacturer: Dell [ 2.283223] input: Dell Dell USB Entry Keyboard as /devices/platform/300e0000.usb/usb6/6-1/6-1:1.0/0003:413C:2107.0001/input/input2 [ 2.335880] hid-generic 0003:413C:2107.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Entry Keyboard] on usb-300e0000.usb-1/input0 [ 2.630984] fsck: CP437: Invalid argument [ 2.631203] fsck: fsck.fat 4.1 (2017-01-24) [ 2.631458] fsck: /dev/mmcblk0p1: 10 files, 18398/65501 clusters [ 2.631747] fsck: STORAGE: clean, 1087/3756032 files, 488896/15017472 blocks [ 3.128508] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 3.129352] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 3.205915] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.820442] systemd[1]: System time before build time, advancing clock. [ 3.829002] cgroup: cgroup2: unknown option "nsdelegate" [ 3.846254] systemd[1]: systemd 242 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid) [ 3.848021] systemd[1]: Detected architecture arm. [ 3.858713] systemd[1]: Set hostname to . [ 3.864690] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument [ 3.970383] systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 3.970414] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 4.163260] random: systemd: uninitialized urandom read (16 bytes read, 75 bits of entropy available) [ 4.164271] systemd[1]: Listening on Journal Socket. [ 4.164822] random: systemd: uninitialized urandom read (16 bytes read, 75 bits of entropy available) [ 4.167586] systemd[1]: Created slice User and Session Slice. [ 4.167740] random: systemd: uninitialized urandom read (16 bytes read, 75 bits of entropy available) [ 4.173582] systemd[1]: Mounting Variable Directory... [ 4.173771] random: systemd: uninitialized urandom read (16 bytes read, 75 bits of entropy available) [ 4.174085] systemd[1]: Reached target Slices. [ 4.174411] random: systemd: uninitialized urandom read (16 bytes read, 75 bits of entropy available) [ 4.175369] systemd[1]: Listening on udev Control Socket. [ 4.252139] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 4.252982] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 4.253094] random: systemd: uninitialized urandom read (16 bytes read, 78 bits of entropy available) [ 4.253484] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 4.253623] random: systemd: uninitialized urandom read (16 bytes read, 78 bits of entropy available) [ 4.258469] systemd[1]: Starting Create Persistent Log Directory on /storage... [ 4.258712] random: systemd: uninitialized urandom read (16 bytes read, 78 bits of entropy available) [ 4.259674] systemd[1]: Listening on Journal Socket (/dev/log). [ 4.260344] random: systemd: uninitialized urandom read (16 bytes read, 78 bits of entropy available) [ 4.265942] systemd[1]: Mounting Kernel Debug File System... [ 4.266318] random: systemd: uninitialized urandom read (16 bytes read, 78 bits of entropy available) [ 4.268470] systemd[1]: Listening on RPCbind Server Activation Socket. [ 4.274750] systemd[1]: Starting Setup NTP servers for timesyncd... [ 4.275973] systemd[1]: Listening on udev Kernel Socket. [ 4.281929] systemd[1]: Starting Show Version... [ 4.290821] systemd[1]: Mounting POSIX Message Queue File System... [ 4.292029] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 4.292492] systemd[1]: Reached target RPC Port Mapper. [ 4.302327] systemd[1]: Starting Wait For Kernel Time Synchronized... [ 4.303698] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 4.304260] systemd[1]: Reached target Paths. [ 4.309103] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 4.327662] systemd[1]: Mounted Variable Directory. [ 4.332188] systemd[1]: Started Create Persistent Log Directory on /storage. [ 4.333487] systemd[1]: Mounted Kernel Debug File System. [ 4.345774] systemd[1]: Started Setup NTP servers for timesyncd. [ 4.350209] systemd[1]: Started Show Version. [ 4.351476] systemd[1]: Mounted POSIX Message Queue File System. [ 4.361471] systemd[1]: Starting Create kernel modules tree from overlays... [ 4.362288] systemd[1]: Condition check resulted in Persistent Log Storage being skipped. [ 4.412489] kernel-overlays-setup: setup base modules [ 4.528682] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/4.4.194 [ 4.651940] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware [ 4.652223] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays [ 4.655785] kernel-overlays-setup: done [ 4.657898] systemd[1]: kernel-overlays.service: Succeeded. [ 4.659896] systemd[1]: Started Create kernel modules tree from overlays. [ 4.668439] systemd[1]: Starting Load Kernel Modules... [ 4.675303] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 4.682745] systemd[1]: Starting Mounting swapfile... [ 4.690122] systemd[1]: Starting Setup machine-id... [ 4.698211] systemd[1]: Starting udev Coldplug all Devices... [ 4.708936] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 4.773813] systemd[1]: Started Setup machine-id. [ 4.781827] systemd[1]: Starting Create Static Device Nodes in /dev... [ 4.803387] systemd[1]: Starting Journal Service... [ 4.806982] wireguard: WireGuard 1.0.20200908 loaded. See www.wireguard.com for information. [ 4.807053] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld . All Rights Reserved. [ 4.815390] systemd[1]: Started Load Kernel Modules. [ 4.817897] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 4.825892] systemd[1]: Starting Apply Kernel Variables... [ 4.838700] systemd[1]: Mounting Kernel Configuration File System... [ 4.865005] systemd[1]: Started Create Static Device Nodes in /dev. [ 4.870141] systemd[1]: Mounted Kernel Configuration File System. [ 4.885183] systemd[1]: Started Apply Kernel Variables. [ 4.921202] systemd[1]: Started Mounting swapfile. [ 4.922070] systemd[1]: Reached target Swap. [ 4.927881] systemd[1]: Mounting Temporary Directory (/tmp)... [ 4.942513] systemd[1]: Mounted Temporary Directory (/tmp). [ 4.943550] systemd[1]: Reached target Local File Systems. [ 5.003957] vendor storage:20190527 ret = -1 [ 5.218964] systemd[1]: Started Journal Service. [ 5.263551] systemd-journald[299]: Received request to flush runtime journal from PID 1 [ 5.326801] random: nonblocking pool is initialized [ 8.308578] generic_wifi_init_module [ 8.515416] stmmac: wakeup enable [ 8.584966] [ 8.584966] *** sta_cfg_set, (null) *** [ 8.584966] [ 8.584989] redirect to /etc/firmware/ssv6051/ssv6051-wifi.cfg [ 8.635696] ssv6xxx_sdio_init [ 8.661894] ======================================= [ 8.661928] == RUN SDIO == [ 8.661945] ======================================= [ 8.661958] ssv6xxx_set_sdio_clk:set sdio clk 25000000Hz [ 8.662030] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0) [ 8.721728] SSV6XXX_SDIO mmc1:0001:1: vendor = 0x3030 device = 0x3030 [ 8.751415] ssv6xxx_sdio_power_on [ 8.767705] SSV6XXX_SDIO mmc1:0001:1: dataIOPort 0x10000 regIOPort 0x10020 [ 8.768501] ssv6xxx_dev_probe(): ssv6200 device found ! [ 8.784072] ssv6xxx_sdio_irq_disable [ 8.785278] MAC address from e-fuse [ 8.785294] EFUSE configuration [ 8.785302] Read efuse chip identity[75000000] [ 8.785308] r_calbration_result- 0 [ 8.785313] sar_result- 0 [ 8.785318] crystal_frequency_offset- 0 [ 8.785323] tx_power_index_1- 0 [ 8.785501] tx_power_index_2- 0 [ 8.785509] MAC address - 58:04:54:c2:b3:ed [ 8.820732] Registering Vendor80211 [ 8.820769] Register SSV cfg80211 vendor cmd(0x67) interface [ 8.857720] [MT-ENCRYPT]: create kthread ef29b640 for CPU 0, ret = 0 [ 8.863099] SSV WLAN driver ssv6200: Crypto task 454 running with priority 120. [ 8.887624] [MT-ENCRYPT]: create kthread ee5edd00 for CPU 1, ret = 0 [ 8.900636] SSV WLAN driver ssv6200: Crypto task 461 running with priority 120. [ 8.917339] [MT-ENCRYPT]: create kthread ee5ed540 for CPU 2, ret = 0 [ 8.923224] SSV WLAN driver ssv6200: Crypto task 463 running with priority 120. [ 8.938382] [MT-ENCRYPT]: create kthread ee6407c0 for CPU 3, ret = 0 [ 8.942111] SSV WLAN driver ssv6200: Crypto task 468 running with priority 120. [ 8.957308] SSV6XXX TX Task started. [ 8.967411] Pre-load cipher [ 8.967582] SSV6XXX RX Task started. [ 9.012627] mic hash allocate fail [ 9.012814] flash_file /tmp/flash.bin not found, disable sar [ 9.012827] SSV6051P setting [ 9.012840] SSV6XXX_IQK_CFG_XTAL_24M [ 9.012848] SSV6051P setting [0x6C726C72] [ 9.012858] TX power setting 0x6c726c72 [ 9.012863] Volt regulator LDO [ 9.018765] reset PLL [ 9.093795] ieee80211 phy0: Selected rate control algorithm 'ssv6xxx_rate_control' [ 9.095485] ieee80211 phy0: SSV6200 of South Silicon Valley [ 9.099857] SVN version 16529 [ 9.099885] SVN ROOT URL http://192.168.15.30/svn/software/project/release/android/box/rk3x28/6051.Q0.1009.21.400401/ssv6xxx [ 9.099894] COMPILER HOST icomm-buildserver-T320 [ 9.099902] COMPILER DATE 12-08-2017-10:34:54 [ 9.099907] COMPILER OS linux [ 9.099913] COMPILER OS ARCH x86_64-linux-gnu-thread-multi [ 9.100693] CHIP TAG: 2014012420010960 [ 9.101174] CHIP ID: RSV6200A0-201311 [ 9.108305] 0x800e0000 [ 9.257897] ADR_INFO_IDX_ADDR[80000230] ADR_INFO_LEN_ADDR[800002cc] [ 9.270688] Writing firmware to SSV6XXX... [ 9.293387] (block_count << 16) = 500000,reg =500000 [ 9.293461] Firmware "/etc/firmware/ssv6051/ssv6051-sw.bin" loaded [ 9.344151] Firmware check OK.d0000 = d0000 [ 9.397457] Firmware name sh->cfg.firmware_path=/etc/firmware/ssv6051/ssv6051-sw.bin [ 9.397733] Firmware version 16380 [ 9.397747] ssv6xxx_watchdog_controller 6 [ 9.408473] ssv6xxx_sdio_irq_enable [ 9.409110] FW TX LOOPBACK OK [ 9.409540] # Do init_cali (iq) [ 9.578473] FW TX LOOPBACK OK [ 9.578571] +++++++++++++++++++++++++++222222222222222!! [ 9.579099] ssv6200_start(): current channel: 1,sc->ps_status=0 [ 9.581925] [I] ssv6200_add_interface(): vif->type = 2, NL80211_IFTYPE_AP=3 [ 9.581943] ssv6xxx_config_vif_res id[0]. [ 9.581963] SSV WLAN driver ssv6200: VIF 58:04:54:c2:b3:ed of type 2 is added. [ 9.581974] BSS Changed use_short_preamble[0] [ 9.581980] BSS_CHANGED_ERP_SLOT: use_short_slot[0] [ 9.582192] NL80211_IFTYPE_STATION!! [ 9.582204] [I] ssv6200_bss_info_changed(): leave [ 9.582242] [I] sv6200_conf_tx vif[0] qos[0] queue[0] aifsn[2] cwmin[15] cwmax[1023] txop[0] [ 9.582400] [I] sv6200_conf_tx vif[0] qos[0] queue[1] aifsn[2] cwmin[15] cwmax[1023] txop[0] [ 9.582595] [I] sv6200_conf_tx vif[0] qos[0] queue[2] aifsn[2] cwmin[15] cwmax[1023] txop[0] [ 9.582795] [I] sv6200_conf_tx vif[0] qos[0] queue[3] aifsn[2] cwmin[15] cwmax[1023] txop[0] [ 9.582933] NL80211_IFTYPE_STATION!! [ 9.582944] [I] ssv6200_bss_info_changed(): leave [ 9.582959] Disable IEEE80211_CONF_PS ps_aid=0 [ 9.583197] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 9.697951] [ 9.697979] ======================================================= [ 9.697986] ==== Launching Wi-Fi driver! (Powered by Rockchip) ==== [ 9.697992] ======================================================= [ 9.698000] Realtek 8723DS SDIO WiFi driver (Powered by Rockchip,Ver v5.3.12_28613.20180703) init. [ 9.698008] [WLAN_RFKILL]: rockchip_wifi_power: 1 [ 9.698017] [BT_RFKILL]: rfkill_get_bt_power_state: rfkill-bt driver has not Successful initialized [ 9.698024] [WLAN_RFKILL]: wifi turn on power. -1 [ 9.698034] mmc1:mmc host rescan start! [ 9.698039] RTW: module init start [ 9.698047] RTW: rtl8189fs v5.3.12_28613.20180703 [ 9.698054] RTW: build time: Jan 12 2022 09:47:48 [ 9.698061] RTW: ## Calling platform_driver_register [ 10.324455] rk_gmac-dwmac 30200000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 10.697322] RTW: rtw_android_wifictrl_func_add: platform_driver_register timeout [ 10.697344] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter [ 10.697423] RTW: rtw_inetaddr_notifier_register [ 10.697606] RTW: module init ret=0 [ 10.829246] [ 10.829268] ======================================================= [ 10.829276] ==== Launching Wi-Fi driver! (Powered by Rockchip) ==== [ 10.829282] ======================================================= [ 10.829291] Realtek 8723DS SDIO WiFi driver (Powered by Rockchip,Ver v5.6.5_31752.20181221_COEX20181130-2e2e) init. [ 10.829299] [WLAN_RFKILL]: rockchip_wifi_power: 1 [ 10.829308] [BT_RFKILL]: rfkill_get_bt_power_state: rfkill-bt driver has not Successful initialized [ 10.829315] [WLAN_RFKILL]: wifi turn on power. -1 [ 10.829323] mmc1:mmc host rescan start! [ 10.829332] RTW: module init start [ 10.829346] RTW: rtl8723ds v5.6.5_31752.20181221_COEX20181130-2e2e [ 10.829353] RTW: build time: Jan 12 2022 09:48:27 [ 10.829360] RTW: rtl8723ds BT-Coex version = COEX20181130-2e2e [ 10.829417] Error: Driver 'bcmdhd_wlan' is already registered, aborting... [ 10.829438] Error: Driver 'bcm4329_wlan' is already registered, aborting... [ 11.827372] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter [ 11.827760] RTW: module init ret=0 [ 11.925564] [ 11.925589] ======================================================= [ 11.925596] ==== Launching Wi-Fi driver! (Powered by Rockchip) ==== [ 11.925602] ======================================================= [ 11.925610] Realtek 8723CS SDIO WiFi driver (Powered by Rockchip,Ver v5.2.1.7_25082.20171108_COEX20170626-1a00_wifi_hal) init. [ 11.925618] [WLAN_RFKILL]: rockchip_wifi_power: 1 [ 11.925626] [BT_RFKILL]: rfkill_get_bt_power_state: rfkill-bt driver has not Successful initialized [ 11.925634] [WLAN_RFKILL]: wifi turn on power. -1 [ 11.925641] mmc1:mmc host rescan start! [ 11.925647] RTW: module init start [ 11.925654] RTW: rtl8723cs v5.2.1.7_25082.20171108_COEX20170626-1a00_wifi_hal [ 11.925661] RTW: build time: Jan 12 2022 09:47:59 [ 11.925668] RTW: rtl8723cs BT-Coex version = COEX20170626-1a00 [ 11.925677] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter [ 11.925931] Error: Driver 'bcmdhd_wlan' is already registered, aborting... [ 11.925952] Error: Driver 'bcm4329_wlan' is already registered, aborting... [ 12.923899] RTW: module init ret=0 LibreELECupstairs:~ #