LibreELEC:~ # dmesg [ 0.000000@0] Initializing cgroup subsys cpuset [ 0.000000@0] Initializing cgroup subsys cpu [ 0.000000@0] Initializing cgroup subsys cpuacct [ 0.000000@0] Linux version 3.14.29 (kszaq@FPGAWorker) (gcc version 5.3.1 20160113 (Linaro GCC 5.3-2016.02) ) #1 SMP Wed Jan 11 22:00:13 CET 2017 [ 0.000000@0] CPU: AArch64 Processor [410fd034] revision 4 [ 0.000000@0] no prop version_code [ 0.000000@0] bootconsole [earlycon0] enabled [ 0.000000@0] fdt Reserved memory table: [ 0.000000@0] linux,meson-fb: 0x000000007e000000 - 0x0000000080000000 (32 MiB) [ 0.000000@0] linux,di: 0x000000007c200000 - 0x000000007e000000 (30 MiB) [ 0.000000@0] DI: DI reserved memory: created CMA memory pool at 0x000000007c200000, size 30 MiB [ 0.000000@0] linux,ion-dev: 0x0000000079200000 - 0x000000007c200000 (48 MiB) [ 0.000000@0] linux,ppmgr: 0x0000000079200000 - 0x0000000079200000 (0 MiB) [ 0.000000@0] linux,codec_mm_cma: 0x0000000067c00000 - 0x0000000073c00000 (192 MiB) [ 0.000000@0] linux,picdec: 0x0000000079200000 - 0x0000000079200000 (0 MiB) [ 0.000000@0] Reserved memory: incorrect alignment of CMA region [ 0.000000@0] linux,codec_mm_reserved: 0x0000000075100000 - 0x0000000079200000 (65 MiB) [ 0.000000@0] fdt Reserved memory total: 370 MiB [ 0.000000@0] cma: Reserved 8 MiB at 74800000 [ 0.000000@0] On node 0 totalpages: 515072 [ 0.000000@0] Normal zone: 9068 pages used for memmap [ 0.000000@0] Normal zone: 0 pages reserved [ 0.000000@0] Normal zone: 515072 pages, LIFO batch:31 [ 0.000000@0] psci: probing function IDs from device-tree [ 0.000000@0] PERCPU: Embedded 12 pages/cpu @ffffffc0750a1000 s18112 r8192 d22848 u49152 [ 0.000000@0] pcpu-alloc: s18112 r8192 d22848 u49152 alloc=12*4096 [ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 506004 [ 0.000000@0] Kernel command line: rootfstype=ramfs init=/init console=ttyS0,115200 no_console_suspend earlyprintk=aml-uart,0xc81004c0 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 androidboot.selinux=permissive androidboot.selinux=permissive logo=osd1,loaded,0x3d800000,1080p60hz maxcpus=4 vout=1080p60hz,enable hdmimode=1080p60hz cvbsmode=480cvbs hdmitx= cvbsdrv=0 androidboot.firstboot=0 jtag=apao androidboot.hardware=amlogic console=tty0 systemd.show_status=auto coherent_pool=4M [ 0.000000@0] logo: osd1 [ 0.000000@0] logo: loaded [ 0.000000@0] logo: 0x3d800000 [ 0.000000@0] logo: 1080p60hz [ 0.000000@0] vout_serve: 1080p60hz [ 0.000000@0] vout_serve: en: 1 [ 0.000000@0] logo: get hdmimode: 1080p60hz [ 0.000000@0] logo: get cvbsmode: 480cvbs [ 0.000000@0] tv_vout: cvbs performance line = 0 [ 0.000000@0] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000@0] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000@0] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000@0] Memory: 1646564K/2060288K available (7633K kernel code, 776K rwdata, 2880K rodata, 889K init, 5214K bss, 413724K reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] vmalloc : 0xffffff8000000000 - 0xffffff8040000000 ( 1024 MB) [ 0.000000@0] vmemmap : 0xffffff8040010000 - 0xffffff8042380000 ( 35 MB) [ 0.000000@0] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc07e000000 ( 2016 MB) [ 0.000000@0] .init : 0xffffffc001ac6000 - 0xffffffc001ba46c0 ( 890 kB) [ 0.000000@0] .text : 0xffffffc001080000 - 0xffffffc001ac5424 ( 10518 kB) [ 0.000000@0] .data : 0xffffffc001ba5000 - 0xffffffc001c672a8 ( 777 kB) [ 0.000000@0] PM: Registered nosave memory: [mem 0x01080000-0x01ac4fff] [ 0.000000@0] SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] arch_multi_cluster:0 [ 0.000000@0] Hierarchical RCU implementation. [ 0.000000@0] RCU debugfs-based tracing is enabled. [ 0.000000@0] CONFIG_RCU_FANOUT set to non-default value of 32 [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000005@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.008244@0] meson_bc_timer: mclk->mux_reg =ffffff800000c990,mclk->reg =ffffff800000e994 [ 0.016758@0] Console: colour dummy device 80x25 [ 0.021087@0] console [tty0] enabled [ 0.024673@0] bootconsole [earlycon0] disabled [ 0.031507@0] allocated 8388608 bytes of page_cgroup [ 0.031517@0] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.031539@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.031557@0] pid_max: default: 32768 minimum: 301 [ 0.031692@0] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.031706@0] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.033768@0] device-tree: Duplicate name in /efusekey, renamed to "key0#1" [ 0.033793@0] device-tree: Duplicate name in /efusekey, renamed to "key1#1" [ 0.033805@0] device-tree: Duplicate name in /efusekey, renamed to "key2#1" [ 0.033818@0] device-tree: Duplicate name in /efusekey, renamed to "key3#1" [ 0.036550@0] Initializing cgroup subsys memory [ 0.036577@0] Initializing cgroup subsys devices [ 0.036588@0] Initializing cgroup subsys freezer [ 0.036603@0] Initializing cgroup subsys blkio [ 0.036648@0] ftrace: allocating 26681 entries in 105 pages [ 0.064082@0] /cpus/cpu@0: Missing clock-frequency property [ 0.064110@0] /cpus/cpu@1: Missing clock-frequency property [ 0.064122@0] /cpus/cpu@2: Missing clock-frequency property [ 0.064134@0] /cpus/cpu@3: Missing clock-frequency property [ 0.064693@0] Meson chip version = RevA (21:A - 82:0) [ 0.065077@1] CPU1: Booted secondary processor [ 0.065465@2] CPU2: Booted secondary processor [ 0.065806@3] CPU3: Booted secondary processor [ 0.065871@0] Brought up 4 CPUs [ 0.065911@0] SMP: Total of 4 processors activated. [ 0.066429@0] devtmpfs: initialized [ 0.073539@0] instabooting: 0 [ 0.080133@0] pinctrl core: initialized pinctrl subsystem [ 0.080788@0] regulator-dummy: no parameters [ 0.081504@0] NET: Registered protocol family 16 [ 0.083992@0] cpuidle: using governor menu [ 0.084142@0] aml_vdac_init: module init [ 0.084280@0] register canvas platform driver [ 0.084352@0] register rdma platform driver [ 0.085918@0] vdso: 2 pages (1 code, 1 data) at base ffffffc001bb0000 [ 0.087623@0] DMA: preallocated 4096 KiB pool for atomic allocations [ 0.088841@0] software IO TLB [mem 0x64400000-0x64800000] (4MB) mapped at [ffffffc064400000-ffffffc0647fffff] [ 0.089288@0] aml_i2c version: 20140813 [ 0.089497@0] i2c-core: driver [pmu4] using legacy resume method [ 0.089570@0] codec_mm:codec_mm_module_init [ 0.089842@0] gxbb_mpll_clk: register mpll_clk_out0 success done [ 0.089863@0] gxbb_mpll_clk: register mpll_clk_out1 success done [ 0.089876@0] gxbb_mpll_clk: register mpll_clk_out2 success done [ 0.090071@0] clk_sys: register PLL sys_pll success done [ 0.090091@0] gxl_clk: [ xtal ] ->clockrate: 24000000Hz [ 0.090101@0] gxl_clk: [ 32Khz ] ->clockrate: 32000Hz [ 0.090111@0] gxl_clk: [ clk81 ] ->clockrate: 166666666Hz [ 0.090121@0] gxl_clk: [ fixed_pll ] ->clockrate: 2000000000Hz [ 0.090131@0] gxl_clk: [ fclk_div2 ] ->clockrate: 1000000000Hz [ 0.090141@0] gxl_clk: [ fclk_div3 ] ->clockrate: 666666666Hz [ 0.090150@0] gxl_clk: [ fclk_div4 ] ->clockrate: 500000000Hz [ 0.090159@0] gxl_clk: [ fclk_div5 ] ->clockrate: 400000000Hz [ 0.090169@0] gxl_clk: [ fclk_div7 ] ->clockrate: 285714285Hz [ 0.090201@0] gxl_clk: clock initialization complete [ 0.090416@0] clkmsr: Gxl msr_clk_reg0=ffffff800041c75c,msr_clk_reg2=ffffff800041e764 [ 0.092744@0] aml_iomap: amlogic iomap probe done [ 0.093357@0] pinmux-gxl c1109880.pinmux: Init pinux probe! [ 0.094274@0] pinmux-gxl c1109880.pinmux: Probed amlogic pinctrl driver [ 0.094808@0] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xc0) [ 0.094842@0] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xc0) [ 0.095006@0] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xc0) [ 0.095030@0] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xc0) [ 0.099363@0] codec_mm has 2 memory regions [ 0.099420@0] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_cma ok [ 0.099439@0] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_reserved ok [ 0.099542@0] codec_mm has 2 memory regions [ 0.099562@0] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_cma ok [ 0.099580@0] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_reserved ok [ 0.101271@0] vpu: driver version: v02 [ 0.101315@0] vpu: load vpu_clk: 666667000Hz(7) [ 0.101400@0] vpu: vpu_probe OK [ 0.102866@0] tv_vout: tvout_probe [ 0.102894@0] tv_vout: major number 254 for disp [ 0.102903@0] vout_notify: vout_register_server [ 0.102912@0] tv_vout: register tv module server ok [ 0.102990@0] tv_vout: tvout_probe OK [ 0.103563@0] canvas_probe reg=00000000c8838000,size=400 [ 0.103596@0] canvas maped reg_base =ffffff800043e000 [ 0.107544@0] rdma_probe [ 0.328878@0] bio: create slab at 0 [ 0.329782@0] SCSI subsystem initialized [ 0.330243@0] usbcore: registered new interface driver usbfs [ 0.330339@0] usbcore: registered new interface driver hub [ 0.330462@0] usbcore: registered new device driver usb [ 0.331248@0] i2c-gpio i2c_gpio.37: using pins 172 (SDA) and 173 (SCL) [ 0.331450@0] pps_core: LinuxPPS API ver. 1 registered [ 0.331464@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.331529@0] PTP clock support registered [ 0.332007@0] hdmitx: system: amhdmitx_init [ 0.332023@0] hdmitx: system: Ver: 2014May6 [ 0.332205@0] hdmitx: system: amhdmitx_probe [ 0.332546@0] hdmitx: system: not find match init-data [ 0.332560@0] hdmitx: system: not find match pwr-ctl [ 0.332571@0] hdmitx hpd irq = 89 [ 0.333005@0] hdmitx20: Mapped PHY: 0xc0800000 [ 0.333025@0] hdmitx20: Mapped PHY: 0xc1104400 [ 0.333051@0] hdmitx20: Mapped PHY: 0xc8100000 [ 0.333061@0] hdmitx20: Mapped PHY: 0xc8834000 [ 0.333070@0] hdmitx20: Mapped PHY: 0xc883a000 [ 0.333080@0] hdmitx20: Mapped PHY: 0xc883c000 [ 0.333093@0] hdmitx20: Mapped PHY: 0xd0100000 [ 0.333103@0] hdmitx20: Mapped PHY: 0xda83a000 [ 0.333120@0] hdmitx: alread display in uboot 0x10 [ 0.333147@0] avmute set to 1 [ 0.333477@0] vout_serve: vout_init_module [ 0.333622@0] tv_vout: tv_set_current_vmode[759]fps_target_mode=16 [ 0.333634@0] tv_vout: mode is 16,sync_duration_den=1,sync_duration_num=60 [ 0.333648@0] tv_vout: already display in uboot [ 0.333657@0] vout_serve: vinfo mode is: 1080p60hz [ 0.333666@0] vout_serve: init mode 1080p60hz [ 0.333752@0] vout_serve: create vout attribute OK [ 0.333764@0] vout_serve: meson_vout_probe OK [ 0.333941@0] logo: logo_init [ 0.334282@0] osd_rdma: osd_rdma_init: rdma_table p=0x74c01000,op=0x74c01000 , v=0xffffff8000471000 [ 0.334301@0] osd_rdma: osd rdma request irq as second interrput function! [ 0.334556@0] Advanced Linux Sound Architecture Driver Initialized. [ 0.337019@0] Switched to clocksource arch_sys_counter [ 0.340204@0] hdmitx: system: irq 80000002 [ 0.357886@0] NET: Registered protocol family 2 [ 0.358427@0] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.358554@0] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.358785@0] TCP: Hash tables configured (established 16384 bind 16384) [ 0.358876@0] TCP: reno registered [ 0.358895@0] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.358946@0] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.359189@0] NET: Registered protocol family 1 [ 0.359455@0] RPC: Registered named UNIX socket transport module. [ 0.359470@0] RPC: Registered udp transport module. [ 0.359478@0] RPC: Registered tcp transport module. [ 0.359487@0] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.359714@0] aml_wifi wifi.32: [wifi_dev_probe] no power_on_pin2 [ 0.359728@0] aml_wifi wifi.32: [wifi_dev_probe] set pwm as 32k output [ 0.359786@0] aml_wifi wifi.32: [wifi_dev_probe] interrupt_pin=241 [ 0.359799@0] aml_wifi wifi.32: [wifi_dev_probe] irq_num=100, irq_trigger_type=1 [ 0.359812@0] aml_wifi wifi.32: [wifi_dev_probe] power_on_pin=240 [ 0.359823@0] aml_wifi wifi.32: [wifi_dev_probe] clock_32k_pin=0 [ 0.360201@0] aml_wifi wifi.32: [wifi_setup_dt] wifi_setup_dt [ 0.360246@0] aml_wifi wifi.32: [wifi_setup_dt] interrupt_pin(241) [ 0.360267@0] aml_wifi wifi.32: [wifi_setup_dt] power_on_pin(240) [ 0.360477@0] Unpacking initramfs... [ 0.387405@0] Freeing initrd memory: 2620K (ffffffc073c28000 - ffffffc073eb7000) [ 0.390463@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.399492@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.401082@0] NFS: Registering the id_resolver key type [ 0.401129@0] Key type id_resolver registered [ 0.401139@0] Key type id_legacy registered [ 0.401156@0] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.401991@0] msgmni has been set to 3621 [ 0.403086@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.403189@0] io scheduler noop registered (default) [ 0.403202@0] io scheduler deadline registered [ 0.403230@0] io scheduler cfq registered [ 0.404414@0] meson-rng c8834000.rng: hwrng registered [ 0.408463@0] loop: module loaded [ 0.410357@0] tun: Universal TUN/TAP device driver, 1.6 [ 0.410381@0] tun: (C) 1999-2004 Max Krasnyansky [ 0.410853@0] drivers/amlogic/efuse/efuse_hw64.c:_efuse_read:168: read error!!! [ 0.410874@0] hwmac: error to read MAC address, use default address [ 0.414493@0] libphy: stmmac: probed [ 0.414518@0] eth0: PHY ID 01814400 at 8 IRQ POLL (stmmac-0:08) active [ 0.414987@0] PPP generic driver version 2.4.2 [ 0.415246@0] NET: Registered protocol family 24 [ 0.415368@0] usbcore: registered new interface driver smsc95xx [ 0.415722@0] platform c9000000.dwc3: Driver dwc3 requests probe deferral [ 0.415862@0] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.415875@0] ehci-h20ahb: H20AHB-EHCI Host Controller driver [ 0.416104@0] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.416410@0] usbcore: registered new interface driver usb-storage [ 0.416641@0] usbcore: registered new interface driver usbserial [ 0.416722@0] usbcore: registered new interface driver usbserial_generic [ 0.416797@0] usbserial: USB Serial support registered for generic [ 0.416882@0] usbcore: registered new interface driver pl2303 [ 0.416954@0] usbserial: USB Serial support registered for pl2303 [ 0.417598@0] amlogic-new-usb2 d0078000.usb2phy: USB2 phy probe:phy_mem:0xd0078000, iomap phy_base:0xffffff800047e000 [ 0.417818@0] amlogic-new-usb3 d0078080.usb3phy: This phy has no usb port [ 0.417848@0] amlogic-new-usb3 d0078080.usb3phy: USB3 phy probe:phy_mem:0xd0078080, iomap phy_base:0xffffff800058e080 [ 0.418184@0] mousedev: PS/2 mouse device common for all mice [ 0.418340@0] i2c /dev entries driver [ 0.418986@0] CPUidle arm64: cpuidle init start!! [ 0.419181@0] ledtrig-cpu: registered to indicate activity on CPUs [ 0.419328@0] hidraw: raw HID events driver (C) Jiri Kosina [ 0.421360@0] usbcore: registered new interface driver usbhid [ 0.421384@0] usbhid: USB HID core driver [ 0.421666@0] meson_uart c81004c0.serial: ==uart0 reg addr = ffffff800059a4c0 [ 0.421706@0] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 225, base_baud = 1500000) is a meson_uart [ 0.421732@0] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.822502@3] console [ttyS0] enabled [ 1.822645@0] hdmitx: plugin [ 1.829453@1] meson_uart c11084c0.serial: ==uart1 reg addr = ffffff800059c4c0 [ 1.836023@1] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud = 1500000) is a meson_uart [ 1.846840@1] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: d0078000, ctrl: 0 [ 1.853937@1] dwc_otg_driver_probe host only, not probe usb_otg!!! [ 1.860488@1] hdmitx: system: hdmitx_hdcp_init [ 1.864607@1] ESM HLD: Initializing... [ 1.868204@1] ESM HLD: Registering device range 'esm'... [ 1.873759@1] ESM HLD: Device range 'esm' has been registered. [ 1.879220@1] ESM HLD: Creating class /sys/class/elliptic... [ 1.884943@1] ESM HLD: The class /sys/class/elliptic has been created. [ 1.891302@1] ESM HLD: Creating device 'esm'... [ 1.896123@1] ESM HLD: Device 'esm' has been created. [ 1.900781@1] ESM HLD: Done initializing the HLD driver. [ 1.922109@1] aml_vrtc rtc.31: rtc core: registered aml_vrtc as rtc0 [ 1.923518@1] secmon has 1 memory regions [ 1.926831@1] secmon: share in base: 0xffffff80005b0000, share out base: 0xffffff80005b2000 [ 1.935091@1] secmon secmon.4: assigned reserved memory node linux,secmon ok [ 1.942064@1] secmon: probe done [ 1.945594@1] storage: storage in base: 0xffffff8001a00000 [ 1.950692@1] storage: storage out base: 0xffffff8001a80000 [ 1.956203@1] storage: storage block base: 0xffffff8001b00000 [ 1.961903@1] storage: probe done! [ 1.962577@0] hdmitx: edid: check sum valid [ 1.962579@0] hdmitx: edid: check sum valid [ 1.962583@0] hdmitx: edid: blk0 raw data [ 1.962623@0] 00ffffffffffff003dcb6308000000000012010380a05a780aee91a3544c9926 [ 1.962623@0] 0f5054a108003140454061408180d1c00101010101011a3680a070381f403020 [ 1.962623@0] 350040846300001a662150b051001b304070360040846300001e000000fc0054 [ 1.962623@0] 582d53523537370a20202020000000fd003a3e1e5310000a2020202020200182 [ 1.962623@0] [ 1.962623@0] [ 1.962626@0] hdmitx: edid: blk1 raw data [ 1.962663@0] 02034bf15802031112130415160514101f22200e0f1d1e191a2324252638097f [ 1.962663@0] 070f7f071707503f06c04d02005706005f7e01675400834f00006c030c001300 [ 1.962663@0] b82dc000000000e30503014c1f009051001b304088170040846300001c011d00 [ 1.962663@0] 7251d01e206e28550040846300001e0000000000000000000000000000000079 [ 1.962663@0] [ 1.962663@0] [ 1.962669@0] EDID Parser: [ 2.048351@0] hdmitx: edid: find IEEEOUT [ 2.048814@1] aml_sd_emmc_probe: line 3558 [ 2.048819@1] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error [ 2.065434@0] hdmitx: edid: check sum valid [ 2.069457@0] hdmitx: edid: check sum valid [ 2.073617@0] hdmitx: update RX hdr info 0 [ 2.073758@1] aml_sd_emmc_reg_init 1146 [ 2.073823@1] get property: ocr_avail, value:0x00200080 [ 2.073826@1] get property: f_min, value:300000 [ 2.073829@1] get property: f_max, value:100000000 [ 2.073832@1] get property: max_req_size, value:0x00020000 [ 2.073839@1] get property: pinname, str:emmc [ 2.073843@1] get property: card_type, value:1 [ 2.073869@1] get property: gpio_dat3, str: [ 2.073872@1] get property: hw_reset, str: [ 2.073909@1] emmc:pdata->caps = c0000d47 [ 2.073917@1] emmc:pdata->caps2 = 18060 [ 2.073930@1] storage 1, boot 1 [ 2.073932@1] get_storage_dev return 1 [ 2.107029@1] [aml_sd_emmc_probe] aml_sd_emmc_probe() success! [ 2.112425@1] aml_sd_emmc_probe: line 3558 [ 2.112838@1] aml_sd_emmc_reg_init 1146 [ 2.112896@1] get property: ocr_avail, value:0x00200080 [ 2.112899@1] get property: f_min, value:400000 [ 2.112903@1] get property: f_max, value:100000000 [ 2.112906@1] get property: max_req_size, value:0x00020000 [ 2.112907@1] get property: irq_in, value:3 [ 2.112910@1] get property: irq_out, value:5 [ 2.112924@1] get property: gpio_cd, str: [ 2.112928@1] get property: pinname, str:sd [ 2.112931@1] get property: jtag_pin, str: [ 2.112936@1] get property: card_type, value:5 [ 2.112939@1] get property: gpio_dat3, str: [ 2.112957@1] sd:pdata->caps = 7 [ 2.112959@1] sd:pdata->caps2 = 0 [ 2.147224@1] [aml_sd_emmc_probe] aml_sd_emmc_probe() success! [ 2.147271@1] aml_sd_emmc_probe: line 3558 [ 2.147572@1] aml_sd_emmc_reg_init 1146 [ 2.147632@1] get property: ocr_avail, value:0x00200080 [ 2.147635@1] get property: f_min, value:400000 [ 2.147638@1] get property: f_max, value:200000000 [ 2.147640@1] get property: max_req_size, value:0x00020000 [ 2.147647@1] get property: pinname, str:sdio [ 2.147651@1] get property: card_type, value:3 [ 2.147696@1] sdio:pdata->caps = 7810f [ 2.147698@1] sdio:pdata->caps2 = 0 [ 2.187030@1] [aml_sd_emmc_probe] aml_sd_emmc_probe() success! [ 2.187463@1] ion_dev has 1 memory regions [ 2.191610@1] fb: osd_init_module [ 2.191799@1] fb: viu vsync irq: 35 [ 2.191807@1] meson-fb has 1 memory regions [ 2.191860@1] meson-fb meson-fb.16: assigned reserved memory node linux,meson-fb ok [ 2.191875@1] fb: osd_probe vinfo:ffffffc001c1b820 [ 2.191881@1] fb: init fbdev bpp is:32 [ 2.322965@2] [aml_is_card_insert] card OUT [ 2.324973@0] hdmitx: ddc rd8b error 0x3a 0x00 0x00 [ 2.327052@0] [RX]-receive ksv list len:1,depth:1,cas:0,dev:0 [ 2.337515@0] [aml_is_card_insert] card OUT [ 2.341587@0] hdmitx: video: get current mode: 1080p60hz [ 2.346829@0] hdmitx: update rx hdr info 0 [ 2.350905@2] fb: osd probe OK [ 2.351040@0] hdmitx: get ext_name (null) [ 2.351049@0] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 16 [ 2.351077@0] hdmtix: set audio [ 2.351088@0] hdmitx tx_aud_src = 0 [ 2.351114@0] hdmitx: fs = 0, cd = 4, tmds_clk = 148500 [ 2.351118@0] hdmitx aud_n_para = 6144 [ 2.351135@0] hdmitx set channel status [ 2.364573@3] emmc: BKOPS_EN bit is not set [ 2.370819@3] emmc: trying cali 0-th time(s) [ 2.377038@3] emmc: delay[0]= 1200 padding= 4, bidx=1 [ 2.377040@3] emmc: delay[1]= 1600 padding= 2, bidx=1 [ 2.377043@3] emmc: delay[2]= 1000 padding= 5, bidx=1 [ 2.377045@3] emmc: delay[3]= 1600 padding= 2, bidx=1 [ 2.377047@3] emmc: delay[4]= 1600 padding= 2, bidx=1 [ 2.377049@3] emmc: delay[5]= 1400 padding= 3, bidx=1 [ 2.377052@3] emmc: delay[6]= 1600 padding= 2, bidx=1 [ 2.377054@3] emmc: delay[7]= 1400 padding= 3, bidx=1 [ 2.377057@3] emmc: calibration result @ 0: max(1600), min(1000) [ 2.377060@3] emmc: line_delay =0x10100302, max_cal_result =1600 [ 2.377062@3] emmc: base_index_max 1, base_index_min 1 [ 2.377069@3] emmc: clk 100000000 SDR mode tuning start [ 2.377340@3] emmc: rx_tuning_result[0] = 10 [ 2.377597@3] emmc: rx_tuning_result[1] = 10 [ 2.377853@3] emmc: rx_tuning_result[2] = 10 [ 2.378109@3] emmc: rx_tuning_result[3] = 10 [ 2.378364@3] emmc: rx_tuning_result[4] = 10 [ 2.378621@3] emmc: rx_tuning_result[5] = 10 [ 2.378878@3] emmc: rx_tuning_result[6] = 10 [ 2.379135@3] emmc: rx_tuning_result[7] = 10 [ 2.379392@3] emmc: rx_tuning_result[8] = 10 [ 2.379648@3] emmc: rx_tuning_result[9] = 10 [ 2.379651@3] emmc: best_win_start =0, best_win_size =10 [ 2.379655@3] emmc: sd_emmc_regs->gclock=0x100024a,sd_emmc_regs->gadjust=0x2000 [ 2.379659@3] emmc: gclock =0x100024a, gdelay=0x10100302, gadjust=0x2000 [ 2.379751@3] emmc: support driver strength type 1 [ 2.379796@3] emmc: try set sd/emmc to DDR mode [ 2.379799@3] emmc: try set sd/emmc to DDR mode [ 2.379883@3] emmc: new HS400 MMC card at address 0001 [ 2.380615@1] emmc: clock 100000000, 8-bit-bus-width [ 2.380615@1] [ 2.380615@1] mmcblk0: emmc:0001 8WPD3R 7.28 GiB [ 2.380780@1] mmcblk0boot0: emmc:0001 8WPD3R partition 1 4.00 MiB [ 2.380915@1] mmcblk0boot1: emmc:0001 8WPD3R partition 2 4.00 MiB [ 2.381072@1] mmcblk0rpmb: emmc:0001 8WPD3R partition 3 512 KiB [ 2.382521@1] mmcblk0: unknown partition table [ 2.383276@3] [mmc_read_partition_tbl] mmc read partition OK! [ 2.383278@3] add_emmc_partition [ 2.383594@1] [mmcblk0p01] bootloader offset 0x000000000000, size 0x000000400000 [ 2.383798@1] [mmcblk0p02] reserved offset 0x000002400000, size 0x000004000000 [ 2.383957@1] [mmcblk0p03] cache offset 0x000006c00000, size 0x000020000000 [ 2.384117@1] [mmcblk0p04] env offset 0x000027400000, size 0x000000800000 [ 2.384288@1] [mmcblk0p05] logo offset 0x000028400000, size 0x000002000000 [ 2.384445@1] [mmcblk0p06] recovery offset 0x00002ac00000, size 0x000002000000 [ 2.384611@1] [mmcblk0p07] rsv offset 0x00002d400000, size 0x000000800000 [ 2.384805@1] [mmcblk0p08] tee offset 0x00002e400000, size 0x000000800000 [ 2.384962@1] [mmcblk0p09] crypt offset 0x00002f400000, size 0x000002000000 [ 2.385120@1] [mmcblk0p10] misc offset 0x000031c00000, size 0x000002000000 [ 2.385278@1] [mmcblk0p11] instaboot offset 0x000034400000, size 0x000020000000 [ 2.385446@1] [mmcblk0p12] boot offset 0x000054c00000, size 0x000002000000 [ 2.385610@1] [mmcblk0p13] system offset 0x000057400000, size 0x000040000000 [ 2.385777@1] [mmcblk0p14] data offset 0x000097c00000, size 0x00013a400000 [ 2.385823@1] card key: card_blk_probe. [ 2.385829@1] emmc_key_init:527 emmc key lba_start:0x12020,lba_end:0x12220 [ 2.385840@1] emmc key: emmc_key_init:552 ok. [ 2.386087@1] amlmmc_dtb_init: register dtb chardev [ 2.386175@1] amlmmc_dtb_init: register dtb chardev OK [ 2.386175@1] Exit aml_emmc_partition_ops OK. [ 2.388822@1] mmcblk0boot1: unknown partition table [ 2.390063@1] mmcblk0boot0: unknown partition table [ 2.390420@1] clear_emmc_wait_flag [ 2.736907@2] ge2d: ge2d_init_module [ 2.740221@2] ge2d: ge2d_dev major:243 [ 2.744291@1] ge2d: ge2d clock is 400 MHZ [ 2.747825@1] ge2d: ge2d: pdev=ffffffc01039a800, irq=182, rstc=0xffffffc063c86980, clk=ffffffc010284d00 [ 2.757165@1] ge2d: mapped phy: 0xd0160000 [ 2.761178@1] ge2d: ge2d start monitor [ 2.764940@2] ge2d: ge2d workqueue monitor start [ 2.765448@1] codec:Amlogic A/V streaming port init [ 2.767327@1] codec:get gate demux control ok ffffffc063dc7140 [ 2.767334@1] codec:get gate parser_top control ok ffffffc063dc71c0 [ 2.767338@1] codec:get gate vpu_intr control ok ffffffc063dc7240 [ 2.767344@1] codec:get gate vdec control ok ffffffc063dc72c0 [ 2.768084@1] codec:[tsync_pcr_init]init success. [ 2.768087@1] codec:amvideocap_init_module [ 2.768253@1] codec:amvideocap_probe,amvideocap [ 2.768258@1] codec:use cma buf. [ 2.768260@1] codec:amvideocap_dev_register [ 2.770703@1] codec:create_ge2d_work_queue video task ok [ 2.771179@1] codec:used fix clk for vdec clk source! [ 2.771188@1] codec:register clk_set_setting cpu[33] [ 2.771571@1] DI: di_module_init ok. [ 2.771583@1] DI: di_module_init: major 239 [ 2.772065@1] DI: di_probe [ 2.772377@1] deinterlace has 1 memory regions [ 2.772425@1] DI: di reveser memory 0x7c200000, size 30MB. [ 2.772436@1] deinterlace deinterlace.26: assigned reserved memory node linux,di ok [ 2.772469@1] di_irq:78,timerc_irq:38 [ 2.859786@1] rdma_register, rdma_table_addr ffffff80005fa000 rdma_table_addr_phy 74c08000 reg_buf ffffffc063cee000 [ 2.870047@1] rdma_register success, handle 1 table_size 8192 [ 2.875715@1] DI: di_probe allocate rdma channel 1. [ 2.880554@1] DI: DI hw version 2. [ 2.883918@1] 0x000000db:Y=db,U=0,V=0 [ 2.887536@1] 0x000000dc:Y=dc,U=0,V=0 [ 2.891153@1] 0x000000dd:Y=dd,U=0,V=0 [ 2.894775@1] 0x000000de:Y=de,U=0,V=0 [ 2.898402@1] 0x000000df:Y=df,U=0,V=0 [ 2.902021@1] 0x000000e0:Y=e0,U=0,V=0 [ 2.905643@1] 0x000000e1:Y=e1,U=0,V=0 [ 2.909270@1] 0x000000e2:Y=e2,U=0,V=0 [ 2.912888@1] 0x000000e3:Y=e3,U=0,V=0 [ 2.916511@1] 0x000000f0:Y=f0,U=0,V=0 [ 2.920140@1] 0x000000f1:Y=f1,U=0,V=0 [ 2.923756@1] 0x000000f2:Y=f2,U=0,V=0 [ 2.927382@1] 0x000000f3:Y=f3,U=0,V=0 [ 2.931001@1] 0x000000f4:Y=f4,U=0,V=0 [ 2.934623@1] 0x000000f5:Y=f5,U=0,V=0 [ 2.938249@1] 0x000000f6:Y=f6,U=0,V=0 [ 2.941869@1] 0x000000f7:Y=f7,U=0,V=0 [ 2.945491@1] 0x000000f8:Y=f8,U=0,V=0 [ 2.949117@1] 0x000000f9:Y=f9,U=0,V=0 [ 2.952736@1] 0x000000fa:Y=fa,U=0,V=0 [ 2.956358@1] 0x000000fb:Y=fb,U=0,V=0 [ 2.959985@1] 0x000000fc:Y=fc,U=0,V=0 [ 2.963749@1] DI: di_probe here. [ 2.967207@1] efusekeynum: 4 [ 2.969649@1] efusekeyname: mac offset: 0 size: 6 [ 2.976027@1] efusekeyname: mac_bt offset: 6 size: 6 [ 2.982447@1] efusekeyname: mac_wifi offset: 12 size: 6 [ 2.988817@1] efusekeyname: usid offset: 18 size: 16 [ 2.995547@1] efuse efuse.10: probe OK! [ 2.999412@1] key unify config unifykey-num is 14 [ 3.003664@1] key unify fact unifykey-num is 14 [ 3.008150@1] aml_unifykeys_probe:1273=============unifykey_devno:ed00000 [ 3.015148@1] 6unifykey: device unifykeys created ok [ 3.020015@1] 6aml_unifykeys_init done! [ 3.023720@1] PPMGRDRV: warn: ppmgr module init func called [ 3.029423@1] PPMGRDRV: err: ppmgr_driver_probe called [ 3.034329@1] ppmgr has 1 memory regions [ 3.038267@1] PPMGRDRV: info: ppmgr_dev major:236 [ 3.043197@1] PPMGRDRV: info: ppmgr_probe done [ 3.047760@1] amlogic rfkill init [ 3.050644@1] enter bt_probe of_node [ 3.054094@1] not get gpio_en [ 3.057034@1] power on valid level is high [ 3.477267@1] audio_dsp: [dsp]register dsp to char divece(257) [ 3.478407@1] amaudio: amaudio: driver amaudio succuess! [ 3.483315@1] [RX]-hdmirx: hdmirx_init. [ 3.486686@1] ESM HLD: Initializing... [ 3.490423@1] ESM HLD: Registering device range 'esm_rx'... [ 3.495940@1] ESM HLD: Device range 'esm_rx' has been registered. [ 3.501960@1] ESM HLD: Creating class /sys/class/elliptic_rx... [ 3.507916@1] ESM HLD: The class /sys/class/elliptic_rx has been created. [ 3.514542@1] ESM HLD: Creating device 'esm_rx'... [ 3.519505@1] ESM HLD: Device 'esm_rx' has been created. [ 3.524547@1] ESM HLD: Done initializing the HLD driver. [ 3.529825@1] module init [ 3.532583@1] [ 3.532583@1] VECM probe start [ 3.537531@1] aml_vecm_probe: ok [ 3.540957@1] saradc c1108680.saradc: initialized by BL30 [ 3.545687@1] saradc c1108680.saradc: calibration start: [ 3.551010@1] saradc c1108680.saradc: nominal=0, value=6 [ 3.556244@1] saradc c1108680.saradc: nominal=256, value=251 [ 3.561861@1] saradc c1108680.saradc: nominal=512, value=500 [ 3.567463@1] saradc c1108680.saradc: nominal=768, value=747 [ 3.573062@1] saradc c1108680.saradc: nominal=1023, value=995 [ 3.578721@1] saradc c1108680.saradc: calibration end: coef=4228 [ 3.584938@1] remote: Driver init [ 3.588077@1] remote: platform_data g_remote_ao_offset=580 [ 3.593375@1] remote: platform_data irq =228 [ 3.597657@1] remote: set drvdata completed [ 3.601838@1] remote: device_create_file completed [ 3.607116@1] input: aml_keypad as /devices/meson-remote.12/input/input0 [ 3.613784@1] remote: input_register_device completed [ 3.618655@1] remote: set_remote_mode[74] [ 3.622552@1] remote: remote config major:233 [ 3.627245@1] remote: physical address:0x27c000 [ 3.631842@1] gpio-key gpio_keypad.47: gpio_key: 0 name(power) pin() [ 3.637739@1] gpio-key gpio_keypad.47: amlogic_gpio_name_map_num pin 0!:: [ 3.644449@1] gpio-key gpio_keypad.47: gpio_key: 0 power(147) [ 3.650184@3] gpio-key gpio_keypad.47: start setup_timer [ 3.655392@3] gpio-key gpio_keypad.47: power key(116) registed. [ 3.661533@3] input: gpio_keypad as /devices/gpio_keypad.47/input/input1 [ 3.668148@1] gpio-key gpio_keypad.47: gpio keypad register input device completed. [ 3.675493@1] input input1: gpio keypad major:232 [ 3.680604@1] cpuinfo: probe done [ 3.684346@1] input: cec_input as /devices/virtual/input/input2 [ 3.689664@1] cectx aocec: aml_cec_probe(): no hdmirx reg resource [ 3.695411@1] cectx aocec: aml_cec_probe(): no hhi reg resource [ 3.701389@1] cectx aocec: aml_cec_probe(): can't find hdmirx [ 3.708136@1] cec: wake up flag:0 [ 3.711956@1] aml_codec_T9015 c8832000.t9015: aml_T9015_audio_codec_probe [ 3.719007@1] aml_pcm_dai: pcm mode detection =1 [ 3.721910@1] aml_spdif_dai: enterd aml_spdif_play,set_clock:-1,sample_rate=4 [ 3.728693@1] aml_spdif_dai: set normal 512 fs /4 fs [ 3.733536@1] aml_audio_hw: IEC958 16bit [ 3.737446@1] hdmitx: audio: aout notify rate 48000 [ 3.742242@1] hdmitx: audio: aout notify size 16 [ 3.746814@1] hdmitx: audio: aout notify format CT_PCM [ 3.747058@3] input input1: key 116 up [ 3.755622@1] hdmtix: set audio [ 3.758737@1] hdmitx tx_aud_src = 0 [ 3.762190@1] hdmitx: fs = 3, cd = 4, tmds_clk = 148500 [ 3.767352@1] hdmitx aud_n_para = 6144 [ 3.771065@1] hdmitx set channel status [ 3.774903@1] hdmitx: audio: Audio Type: PCM [ 3.779079@1] hdmitx: audio: set audio param [ 3.987231@1] aml_snd_card: headphone detection disable=1 [ 3.987735@1] aml_snd_m8_card aml_m8_snd.46: T9015-audio-hifi <-> I2S.39 mapping ok [ 3.994936@1] aml_snd_m8_card aml_m8_snd.46: dit-hifi <-> SPDIF.40 mapping ok [ 4.001804@1] aml_pcm: enter aml_pcm_new dai->name: PCM.41 dai->id: 0 [ 4.008177@1] aml_snd_m8_card aml_m8_snd.46: pcm2bt-pcm <-> PCM.41 mapping ok [ 4.015137@1] aml_snd_m8_card aml_m8_snd.46: ASoC: no source widget found for LOUTL [ 4.022726@1] aml_snd_m8_card aml_m8_snd.46: ASoC: Failed to add route LOUTL -> direct -> Ext Spk [ 4.031521@1] aml_snd_m8_card aml_m8_snd.46: ASoC: no source widget found for LOUTR [ 4.039107@1] aml_snd_m8_card aml_m8_snd.46: ASoC: Failed to add route LOUTR -> direct -> Ext Spk [ 4.158714@1] aml_snd_card: audio use jtag pinmux as i2s output, read val =0 [ 4.170294@1] TCP: cubic registered [ 4.173641@1] NET: Registered protocol family 10 [ 4.178315@1] NET: Registered protocol family 17 [ 4.182240@1] Key type dns_resolver registered [ 4.188221@1] Registering SWP/SWPB emulation handler [ 4.192572@1] regulator-dummy: disabling [ 4.897225@1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.897297@1] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 4.905403@1] xhci-hcd xhci-hcd.0.auto: irq 62, io mem 0xc9000000 [ 4.911239@1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.917976@1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.925292@1] usb usb1: Product: xHCI Host Controller [ 4.930305@1] usb usb1: Manufacturer: Linux 3.14.29 xhci-hcd [ 4.935901@1] usb usb1: SerialNumber: xhci-hcd.0.auto [ 4.941581@1] hub 1-0:1.0: USB hub found [ 4.944809@1] hub 1-0:1.0: 2 ports detected [ 4.949209@1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.954539@1] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.962430@1] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 4.969205@1] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.976524@1] usb usb2: Product: xHCI Host Controller [ 4.981535@1] usb usb2: Manufacturer: Linux 3.14.29 xhci-hcd [ 4.987140@1] usb usb2: SerialNumber: xhci-hcd.0.auto [ 4.992716@1] hub 2-0:1.0: USB hub found [ 4.996040@1] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 5.003829@0] console [netcon0] enabled [ 5.007077@0] netconsole: network logging started [ 5.011747@0] aml_vrtc rtc.31: setting system clock to 2015-01-01 00:00:08 UTC (1420070408) [ 5.020936@0] cpufreq-scpi cpufreq-meson.7: enter cpufreq [ 5.025458@0] cpufreq-scpi cpufreq-meson.7: probe cpufreq okay [ 5.032017@0] gxbb_pm: enter meson_pm_probe! [ 5.035554@0] gxbb_pm: meson_pm_probe done [ 5.040445@0] cpucore_cooling_register, max_cpu_core_num:4 [ 5.060217@0] aml_istbt_dev_ready NULL [ 5.060283@0] ALSA device list: [ 5.061454@0] #0: AML-M8AUDIO [ 5.065121@0] Freeing unused kernel memory: 888K (ffffffc001ac6000 - ffffffc001ba4000) [ 5.105165@2] fb: Frame buffer memory assigned at [ 5.105184@2] fb: 0, phy: 0x000000007e000000, vir:0xffffff8001f00000, size=24576K [ 5.105184@2] [ 5.105195@2] fb: ---------------clear fb0 memory ffffff8001f00000 [ 5.118983@2] fb: osd[0] canvas.idx =0x40 [ 5.118994@2] fb: osd[0] canvas.addr=0x7e000000 [ 5.118998@2] fb: osd[0] canvas.width=7680 [ 5.119002@2] fb: osd[0] canvas.height=3240 [ 5.119006@2] fb: osd[0] frame.width=1920 [ 5.119010@2] fb: osd[0] frame.height=1080 [ 5.131316@0] fb: osd[0] canvas.idx =0x40 [ 5.131318@0] fb: osd[0] canvas.addr=0x7e000000 [ 5.131319@0] fb: osd[0] canvas.width=7680 [ 5.131321@0] fb: osd[0] canvas.height=2160 [ 5.131322@0] fb: osd[0] frame.width=1920 [ 5.131324@0] fb: osd[0] frame.height=1080 [ 5.149902@2] fb: Frame buffer memory assigned at [ 5.149921@2] fb: 1, phy: 0x000000007f800000, vir:0xffffff8003780000, size=1024K [ 5.149921@2] [ 5.149931@2] fb: fb1 open, logo index:1 [ 5.181449@0] vfm_map_store:rm default [ 5.181449@0] [ 5.181516@0] vfm_map_store:add default decoder ppmgr deinterlace amvideo [ 5.181516@0] [ 5.181594@0] fb: osd[0] enable: 1 (platform_init) [ 5.247941@3] Console: switching to colour frame buffer device 240x67 [ 5.278761@1] aml_nftl_dev: module license 'Proprietary' taints kernel. [ 5.278778@1] Disabling lock debugging due to kernel taint [ 5.344209@3] EXT4-fs (mmcblk0p13): couldn't mount as ext3 due to feature incompatibilities [ 5.344552@3] EXT4-fs (mmcblk0p13): couldn't mount as ext2 due to feature incompatibilities [ 5.346211@3] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: (null) [ 5.559336@3] EXT4-fs (mmcblk0p14): couldn't mount as ext3 due to feature incompatibilities [ 5.559671@3] EXT4-fs (mmcblk0p14): couldn't mount as ext2 due to feature incompatibilities [ 5.562998@3] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: (null) [ 6.731346@3] systemd[1]: System time before build time, advancing clock. [ 6.733894@3] random: systemd urandom read with 58 bits of entropy available [ 6.737519@3] systemd[1]: systemd 229 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 6.737990@3] systemd[1]: Detected architecture arm64. [ 6.738298@3] systemd[1]: Set hostname to . [ 6.796140@3] systemd[1]: Listening on udev Kernel Socket. [ 6.796571@3] systemd[1]: Listening on Journal Socket. [ 6.796747@3] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 6.796886@3] systemd[1]: Listening on udev Control Socket. [ 6.797072@3] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 6.797781@3] systemd[1]: Created slice User and Session Slice. [ 6.797966@3] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.798138@3] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 6.798393@3] systemd[1]: Reached target Paths. [ 6.798676@3] systemd[1]: Created slice System Slice. [ 6.800408@0] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 6.800462@3] systemd[1]: Starting Debug Shell on /dev/ttyS0... [ 6.802677@3] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 6.804715@3] systemd[1]: Starting Remount Root and Kernel File Systems... [ 6.804848@3] systemd[1]: Reached target Slices. [ 6.807547@3] systemd[1]: Mounting Variable Directory... [ 6.810828@3] systemd[1]: Starting Show Version... [ 6.816601@3] systemd[1]: Starting Load Kernel Modules... [ 6.819522@3] systemd[1]: Mounting Temporary Directory... [ 6.822109@3] systemd[1]: Mounting POSIX Message Queue File System... [ 6.824493@3] systemd[1]: Starting Mounting swapfile... [ 6.826514@3] systemd[1]: Mounting Debug File System... [ 6.831911@3] systemd[1]: Starting Setup machine-id... [ 6.840521@3] systemd[1]: Mounted Debug File System. [ 6.840766@3] systemd[1]: Mounted POSIX Message Queue File System. [ 6.840961@3] systemd[1]: Mounted Variable Directory. [ 6.841153@3] systemd[1]: Mounted Temporary Directory. [ 6.843560@1] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 6.844191@3] systemd[1]: Started Debug Shell on /dev/ttyS0. [ 6.846465@3] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 6.848066@3] systemd[1]: Started Remount Root and Kernel File Systems. [ 6.851235@3] systemd[1]: Started Show Version. [ 6.856304@3] systemd[1]: Started Setup machine-id. [ 6.860901@0] mali-utgard d00c0000.mali: set min pp to default 1 [ 6.860915@0] mali-utgard d00c0000.mali: set min clk default to 0 [ 6.861023@0] mali-utgard d00c0000.mali: max clk set 5 [ 6.861028@0] mali-utgard d00c0000.mali: turbo clk set to 6 [ 6.863691@0] gpu cooling register okay with err=0 [ 6.863827@0] gpu core cooling register okay with err=0 [ 6.864337@0] Mali: Mali device driver loaded [ 6.872574@3] systemd[1]: Started Load Kernel Modules. [ 6.915575@2] systemd[1]: Started Mounting swapfile. [ 7.015538@2] systemd[1]: Reached target Swap. [ 7.017771@2] systemd[1]: Starting Apply Kernel Variables... [ 7.019932@2] systemd[1]: Mounting Configuration File System... [ 7.022015@2] systemd[1]: Starting Journal Service... [ 7.026120@2] systemd[1]: Starting udev Coldplug all Devices... [ 7.028673@2] systemd[1]: Starting Create Static Device Nodes in /dev... [ 7.031386@2] systemd[1]: Starting Setup Timezone data... [ 7.036096@2] systemd[1]: Mounted Configuration File System. [ 7.036903@2] systemd[1]: Started Apply Kernel Variables. [ 7.069569@1] systemd[1]: Started Create Static Device Nodes in /dev. [ 7.091363@1] systemd[1]: Started Setup Timezone data. [ 7.116202@1] systemd[1]: Started Journal Service. [ 7.166151@3] systemd-journald[1831]: Received request to flush runtime journal from PID 1 [ 7.333401@3] random: nonblocking pool is initialized [ 7.914598@2] Console: switching to colour dummy device 80x25 [ 7.956377@2] Triggered SDIO WiFi power on and bus rescan. [ 7.956418@2] aml_wifi wifi.32: [extern_wifi_set_enable] WIFI Disable! 240 [ 8.010955@1] remote: cur_mode = 0 [ 8.010980@1] remote: set_remote_mode[74] [ 8.257917@2] aml_wifi wifi.32: [extern_wifi_set_enable] WIFI Enable! 240 [ 8.596323@0] sdio: new high speed SDIO card at address 0001 [ 8.596338@2] sdio: clock 50000000, 4-bit-bus-width [ 8.596338@2] [ 8.598902@2] [sdio_reinit] finish [ 8.646332@1] 8021q: 802.1Q VLAN Support v1.8 [ 10.617386@1] libphy: stmmac-0:08 - Link is Up - 100/Full [ 15.723218@3] aml_spdif_dai: enterd aml_spdif_play,set_clock:4,sample_rate=4 [ 15.723288@3] aml_spdif_dai: share the same clock [ 15.723297@3] aml_audio_hw: IEC958 16bit [ 15.723305@3] hdmitx: audio: aout notify rate 48000 [ 15.723309@3] hdmitx: audio: aout notify size 16 [ 15.723313@3] hdmitx: audio: no update [ 15.745292@3] aml_spdif_dai: share the same clock [ 15.745314@3] aml_audio_hw: IEC958 16bit [ 15.745321@3] hdmitx: audio: aout notify rate 48000 [ 15.745325@3] hdmitx: audio: aout notify size 16 [ 15.745329@3] hdmitx: audio: no update [ 15.747344@3] aml_spdif_dai: share the same clock [ 15.747362@3] aml_audio_hw: IEC958 16bit [ 15.747372@3] hdmitx: audio: aout notify rate 48000 [ 15.747376@3] hdmitx: audio: aout notify size 16 [ 15.747380@3] hdmitx: audio: no update [ 15.748614@3] aml_spdif_dai: share the same clock [ 15.748636@3] aml_audio_hw: IEC958 16bit [ 15.748643@3] hdmitx: audio: aout notify rate 48000 [ 15.748647@3] hdmitx: audio: aout notify size 16 [ 15.748651@3] hdmitx: audio: no update [ 15.749794@3] aml_spdif_dai: share the same clock [ 15.749815@3] aml_audio_hw: IEC958 16bit [ 15.749823@3] hdmitx: audio: aout notify rate 48000 [ 15.749827@3] hdmitx: audio: aout notify size 16 [ 15.749831@3] hdmitx: audio: no update [ 15.821212@1] audio_dsp: buf=0 [ 15.821228@1] audio_dsp: IEC958_mode_raw=0 [ 15.821260@1] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM [ 15.821265@1] audio_dsp: last mode 0,now 0 [ 15.826923@1] aml_spdif_dai: share the same clock [ 15.826945@1] aml_audio_hw: IEC958 16bit [ 15.826954@1] hdmitx: audio: aout notify rate 48000 [ 15.826957@1] hdmitx: audio: aout notify size 16 [ 15.826961@1] hdmitx: audio: no update [ 15.829054@1] aml_spdif_dai: share the same clock [ 15.829074@1] aml_audio_hw: IEC958 16bit [ 15.829082@1] hdmitx: audio: aout notify rate 48000 [ 15.829085@1] hdmitx: audio: aout notify size 16 [ 15.829089@1] hdmitx: audio: no update [ 15.830857@1] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, same source mode(1) [ 15.830869@1] aml_spdif_dai: share the same clock [ 15.830876@1] aml_spdif_dai: iec958 mode PCM32 [ 15.830885@1] aml_audio_hw: IEC958 PCM32 [ 15.830892@1] hdmitx: audio: aout notify rate 44100 [ 15.830896@1] hdmitx: audio: aout notify size 32 [ 15.830901@1] hdmtix: set audio [ 15.830916@1] hdmitx tx_aud_src = 0 [ 15.830943@1] hdmitx: fs = 2, cd = 4, tmds_clk = 148500 [ 15.830947@1] hdmitx aud_n_para = 6272 [ 15.830965@1] hdmitx set channel status [ 15.831023@1] hdmitx: audio: Audio Type: PCM [ 15.831027@1] hdmitx: audio: set audio param [ 15.831037@1] aml_snd_m8_card aml_m8_snd.46: i2s/958 same source [ 15.831465@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, same source mode(1) [ 15.831472@0] aml_spdif_dai: share the same clock [ 15.831478@0] aml_spdif_dai: iec958 mode PCM32 [ 15.831485@0] aml_audio_hw: IEC958 PCM32 [ 15.831490@0] hdmitx: audio: aout notify rate 44100 [ 15.831494@0] hdmitx: audio: aout notify size 32 [ 15.831498@0] hdmitx: audio: no update [ 15.831506@0] aml_snd_m8_card aml_m8_snd.46: i2s/958 same source [ 15.837363@3] aml_snd_m8_card aml_m8_snd.46: I2S playback enable [ 15.837379@3] aml_snd_m8_card aml_m8_snd.46: IEC958 playback enable [ 16.082397@0] fb: osd[0] enable: 1 (kodi.bin) [ 22.836966@0] remote: press ircode = 0x50, [ 22.836989@0] remote: scancode = 0x006a,maptable = 0,code:0xaf50fe01 [ 22.836998@0] [ 23.197065@3] remote: release ircode = 0x50, [ 23.197069@3] remote: scancode = 0x006a, maptable = 0,code:0x00000000 [ 23.197069@3] [ 23.284822@0] remote: press ircode = 0x1a, [ 23.284852@0] remote: scancode = 0x006c,maptable = 0,code:0xe51afe01 [ 23.284880@0] [ 23.637112@0] remote: release ircode = 0x1a, [ 23.637146@0] remote: scancode = 0x006c, maptable = 0,code:0x00000000 [ 23.637159@0] [ 23.766656@0] remote: press ircode = 0x50, [ 23.766688@0] remote: scancode = 0x006a,maptable = 0,code:0xaf50fe01 [ 23.766719@0] [ 24.091404@0] remote: release ircode = 0x50, [ 24.091407@0] remote: scancode = 0x006a, maptable = 0,code:0xec13fe01 [ 24.091407@0] [ 24.091414@0] remote: press ircode = 0x13, [ 24.091416@0] remote: scancode = 0x001c,maptable = 0,code:0xec13fe01 [ 24.091416@0] [ 24.447075@0] remote: release ircode = 0x13, [ 24.447078@0] remote: scancode = 0x001c, maptable = 0,code:0x00000000 [ 24.447078@0] [ 26.131582@0] remote: press ircode = 0x1a, [ 26.131606@0] remote: scancode = 0x006c,maptable = 0,code:0xe51afe01 [ 26.131632@0] [ 26.487084@2] remote: release ircode = 0x1a, [ 26.487111@2] remote: scancode = 0x006c, maptable = 0,code:0x00000000 [ 26.487128@2] [ 27.710110@0] remote: press ircode = 0x19, [ 27.710114@0] remote: scancode = 0x000e,maptable = 0,code:0xe619fe01 [ 27.710114@0] [ 28.067081@3] remote: release ircode = 0x19, [ 28.067111@3] remote: scancode = 0x000e, maptable = 0,code:0x00000000 [ 28.067120@3] [ 79.664992@0] remote: press ircode = 0x16, [ 79.665016@0] remote: scancode = 0x0067,maptable = 0,code:0xe916fe01 [ 79.665048@0] [ 80.017108@0] remote: release ircode = 0x16, [ 80.017134@0] remote: scancode = 0x0067, maptable = 0,code:0x00000000 [ 80.017143@0] [ 80.098094@0] remote: press ircode = 0x50, [ 80.098119@0] remote: scancode = 0x006a,maptable = 0,code:0xaf50fe01 [ 80.098142@0] [ 80.457072@0] remote: release ircode = 0x50, [ 80.457075@0] remote: scancode = 0x006a, maptable = 0,code:0x00000000 [ 80.457075@0] [ 80.868534@0] remote: press ircode = 0x50, [ 80.868561@0] remote: scancode = 0x006a,maptable = 0,code:0xaf50fe01 [ 80.868573@0] [ 81.037115@0] remote: release ircode = 0x50, [ 81.037138@0] remote: scancode = 0x006a, maptable = 0,code:0x00000000 [ 81.037148@0] [ 81.037188@0] remote: press ircode = 0x50, [ 81.037194@0] remote: scancode = 0x006a,maptable = 0,code:0xaf50fe01 [ 81.037200@0] [ 81.207077@0] remote: release ircode = 0x50, [ 81.207082@0] remote: scancode = 0x006a, maptable = 0,code:0x00000000 [ 81.207082@0] [ 81.266359@0] remote: press ircode = 0x50, [ 81.266385@0] remote: scancode = 0x006a,maptable = 0,code:0xaf50fe01 [ 81.266408@0] [ 81.617087@0] remote: release ircode = 0x50, [ 81.617112@0] remote: scancode = 0x006a, maptable = 0,code:0x00000000 [ 81.617121@0] [ 81.989792@0] remote: press ircode = 0x51, [ 81.989796@0] remote: scancode = 0x0069,maptable = 0,code:0xae51fe01 [ 81.989796@0] [ 82.317195@0] remote: release ircode = 0x51, [ 82.317223@0] remote: scancode = 0x0069, maptable = 0,code:0xe51afe01 [ 82.317247@0] [ 82.317258@0] remote: press ircode = 0x1a, [ 82.317263@0] remote: scancode = 0x006c,maptable = 0,code:0xe51afe01 [ 82.317270@0] [ 82.677086@2] remote: release ircode = 0x1a, [ 82.677091@2] remote: scancode = 0x006c, maptable = 0,code:0x00000000 [ 82.677091@2] [ 82.678502@0] remote: press ircode = 0x50, [ 82.678506@0] remote: scancode = 0x006a,maptable = 0,code:0xaf50fe01 [ 82.678506@0] [ 82.847076@2] remote: release ircode = 0x50, [ 82.847080@2] remote: scancode = 0x006a, maptable = 0,code:0x00000000 [ 82.847080@2] [ 82.859356@0] remote: press ircode = 0x50, [ 82.859360@0] remote: scancode = 0x006a,maptable = 0,code:0xaf50fe01 [ 82.859360@0] [ 83.427086@2] remote: release ircode = 0x50, [ 83.427089@2] remote: scancode = 0x006a, maptable = 0,code:0x00000000 [ 83.427089@2] [ 83.750433@0] remote: press ircode = 0x50, [ 83.750454@0] remote: scancode = 0x006a,maptable = 0,code:0xaf50fe01 [ 83.750483@0] [ 84.107084@3] remote: release ircode = 0x50, [ 84.107088@3] remote: scancode = 0x006a, maptable = 0,code:0x00000000 [ 84.107088@3] [ 84.111792@0] remote: press ircode = 0x13, [ 84.111795@0] remote: scancode = 0x001c,maptable = 0,code:0xec13fe01 [ 84.111795@0] [ 84.467098@0] remote: release ircode = 0x13, [ 84.467123@0] remote: scancode = 0x001c, maptable = 0,code:0x00000000 [ 84.467141@0] [ 144.939244@0] aml_snd_m8_card aml_m8_snd.46: I2S playback disable [ 144.939265@0] aml_snd_m8_card aml_m8_snd.46: IEC958 playback disable [ 144.940669@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, same source mode(1) [ 144.940681@0] aml_spdif_dai: share the same clock [ 144.940688@0] aml_spdif_dai: iec958 mode PCM32 [ 144.940697@0] aml_audio_hw: IEC958 PCM32 [ 144.940705@0] hdmitx: audio: aout notify rate 44100 [ 144.940709@0] hdmitx: audio: aout notify size 32 [ 144.940713@0] hdmitx: audio: no update [ 144.940723@0] aml_snd_m8_card aml_m8_snd.46: i2s/958 same source [ 154.941185@0] aml_spdif_dai: enterd aml_spdif_play,set_clock:5,sample_rate=4 [ 154.941202@0] aml_spdif_dai: share the same clock [ 154.941213@0] aml_audio_hw: IEC958 16bit [ 154.941222@0] hdmitx: audio: aout notify rate 48000 [ 154.941227@0] hdmitx: audio: aout notify size 16 [ 154.941233@0] hdmtix: set audio [ 154.941253@0] hdmitx tx_aud_src = 0 [ 154.941284@0] hdmitx: fs = 3, cd = 4, tmds_clk = 148500 [ 154.941290@0] hdmitx aud_n_para = 6144 [ 154.941312@0] hdmitx set channel status [ 154.941379@0] hdmitx: audio: Audio Type: PCM [ 154.941384@0] hdmitx: audio: set audio param