[    0.000000@0] Booting Linux on physical CPU 0x200
[    0.000000@0] Linux version 3.10.108 (dtech@LibreBuilder) (gcc version 8.3.0 (GCC) ) #1 SMP PREEMPT Wed Dec 1 19:22:36 CET 2021
[    0.000000@0] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
[    0.000000@0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000@0] Machine: Amlogic Meson8, model: AMLOGIC
[    0.000000@0] physical memory start address is 0x200000
[    0.000000@0] reserved_end is 1fafffff
[    0.000000@0]
[    0.000000@0] Total memory is 2046 MiB
[    0.000000@0] Reserved low memory from 0x06000000 to 0x1fafffff, size: 411 MiB
[    0.000000@0]        mesonfb0(low)           : 0x06100000 - 0x0a900000 ( 72 MiB)
[    0.000000@0]        mesonfb1(low)           : 0x0a900000 - 0x0aa00000 (  1 MiB)
[    0.000000@0]        deinterlace0(high)      : 0x7df00000 - 0x80000000 ( 33 MiB)
[    0.000000@0]        mesonstream0(low)       : 0x0aa00000 - 0x0ca00000 ( 32 MiB)
[    0.000000@0]        vdec0(low)      : 0x0ca00000 - 0x1ca00000 (256 MiB)
[    0.000000@0]        ppmgr0(high)    : 0x7bf00000 - 0x7df00000 ( 32 MiB)
[    0.000000@0]        vdin00(low)     : 0x1ca00000 - 0x1cb00000 (  1 MiB)
[    0.000000@0]        vdin10(low)     : 0x1cb00000 - 0x1db00000 ( 16 MiB)
[    0.000000@0]        amlvideo20(low)         : 0x1db00000 - 0x1f300000 ( 24 MiB)
[    0.000000@0]        amvideocap0(low)        : 0x1f300000 - 0x1fb00000 (  8 MiB)
[    0.000000@0] get storage device: storage 2
[    0.000000@0] value=2
[    0.000000@0] get_storage_device : get storage device: storage 2
[    0.000000@0] get_storage_device : value=2
[    0.000000@0] [get_storage_device] storage_flag=2
[    0.000000@0] Memory policy: ECC disabled, Data cache writealloc
[    0.000000@0] On node 0 totalpages: 398336
[    0.000000@0] free_area_init_node: node 0, pgdat c091d0c0, node_mem_map c0b55000
[    0.000000@0]   Normal zone: 1520 pages used for memmap
[    0.000000@0]   Normal zone: 0 pages reserved
[    0.000000@0]   Normal zone: 85760 pages, LIFO batch:15
[    0.000000@0]   HighMem zone: 2442 pages used for memmap
[    0.000000@0]   HighMem zone: 312576 pages, LIFO batch:31
[    0.000000@0] Meson chip version = RevA (1D:A - 0:74E)
[    0.000000@0] PERCPU: Embedded 7 pages/cpu @c1ae4000 s7488 r8192 d12992 u32768
[    0.000000@0] pcpu-alloc: s7488 r8192 d12992 u32768 alloc=8*4096
[    0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000@0] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 396816
[    0.000000@0] Kernel command line: rootfstype=ramfs init=/init console=ttyS0,115200n8 no_console_suspend earlyprintk ramoops.mem_address=0x04e00000 ramoops.mem_size=0x100000 ramoops.record_size=0x8000 ramoops.console_size=0x4000 androidboot.selinux=permissive storage=2 cvbsdrv=0 vdaccfg=0xa000 logo=osd1,loaded,0x07900000,720p,full hdmimode=720p cvbsmode=576cvbs androidboot.firstboot=1 hdmitx= bootfromsd console=ttyS0,115200n8 no_console_suspend console=tty0 consoleblank=0 systemd.show_status=auto
[    0.000000@0] cvbs performance line = 0
[    0.000000@0] cvbs trimming line = 0xa000
[    0.000000@0] cvbs trimming.1.v5: 0xa0, 0x0
[    0.000000@0] osd1:1
[    0.000000@0] loaded:268435459
[    0.000000@0] logo has been loaded
[    0.000000@0] 720p:11
[    0.000000@0] full:2
[    0.000000@0] kernel get hdmimode form uboot is 720p
[    0.000000@0] kernel get cvbsmode form uboot is 576cvbs
[    0.000000@0] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000@0] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000@0] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000@0] Memory: 64MB 16MB 1476MB = 1556MB total
[    0.000000@0] Memory: 1561472k/1561472k available, 31872k reserved, 1250304K highmem
[    0.000000@0] Virtual kernel memory layout:
[    0.000000@0]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000@0]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000@0]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000@0]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000@0]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000@0]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000@0]       .text : 0xc0008000 - 0xc08922f0   (8745 kB)
[    0.000000@0]       .init : 0xc0893000 - 0xc08c3d40   ( 196 kB)
[    0.000000@0]       .data : 0xc08c4000 - 0xc091df58   ( 360 kB)
[    0.000000@0]        .bss : 0xc091df58 - 0xc0b50d5c   (2252 kB)
[    0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000@0] Preemptible hierarchical RCU implementation.
[    0.000000@0]        RCU debugfs-based tracing is enabled.
[    0.000000@0] NR_IRQS:256
[    0.000000@0] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[    0.000000@0] Global timer: MESON TIMER-F (c08df2c0) initialized
[    0.000000@0] Switching to timer-based delay loop
[    0.000000@0] Console: colour dummy device 80x30
[    0.000000@0] console [tty0] enabled
[    0.000000@0] meson_serial_console_setup
[    0.000000@0] console [ttyS0] enabled
[    0.381046@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
[    0.391288@0] pid_max: default: 32768 minimum: 301
[    0.396198@0] Mount-cache hash table entries: 512
[    0.405434@0] CPU: Testing write buffer coherency: ok
[    0.405956@0] CPU0: thread -1, cpu 0, socket 2, mpidr 80000200
[    0.411518@0] Setting up static identity map for 0xc062d0f8 - 0xc062d150
[    0.418219@0] L310 cache controller enabled
[    0.422271@0] l2x0: 8 ways, 4096 sets, CACHE_ID 0x4100a0c9,  Cache size: 1048576 B
[    0.429739@0]       AUX_CTRL 0x7ec80001, PERFETCH_CTRL 0x71000007, POWER_CTRL  0x00000000
[    0.437853@0]       TAG_LATENCY 0x00000111, DATA_LATENCY 0x00000222
[    0.500171@0] write pen_release: 1
[    0.500486@1] CPU1: Booted secondary processor
[    0.500506@1] CPU1: thread -1, cpu 1, socket 2, mpidr 80000201
[    0.520153@0] write pen_release: 2
[    0.528385@2] CPU2: Booted secondary processor
[    0.528397@2] CPU2: thread -1, cpu 2, socket 2, mpidr 80000202
[    0.540155@0] write pen_release: 3
[    0.548385@3] CPU3: Booted secondary processor
[    0.548398@3] CPU3: thread -1, cpu 3, socket 2, mpidr 80000203
[    0.548483@0] Brought up 4 CPUs
[    0.561413@0] SMP: Total of 4 processors activated (8.00 BogoMIPS).
[    0.567608@0] CPU: All CPU(s) started in SVC mode.
[    0.572921@0] devtmpfs: initialized
[    0.583037@0] clkrate [ xtal         ] : 24000000
[    0.583086@0] clkrate [ pll_sys      ] : 792000000
[    0.585912@0] clkrate [ pll_fixed    ] : 2550000000
[    0.590580@0] clkrate [ pll_vid      ] : 366000000
[    0.594967@0] TODO: clk_get_rate_hpll() is not implement in M8 now
[    0.601098@0] clkrate [ pll_hpll     ] : 0
[    0.604886@0] clkrate [ pll_ddr      ] : 0
[    0.608596@0] clkrate [ a9_clk       ] : 792000000
[    0.612915@0] clkrate [ clk81        ] : 141666666
[    0.617881@0] pinctrl core: initialized pinctrl subsystem
[    0.622851@0] regulator-dummy: no parameters
[    0.626947@0] NET: Registered protocol family 16
[    0.638852@0] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[    0.642761@0] VPU driver version: v03
[    0.643976@0] vpu driver detect cpu type: m8m2
[    0.648375@0] load vpu_clk in dts: 364000000Hz(7)
[    0.653115@0] vpu_probe OK
[    0.661350@0] amlogic_gpio gpio: Probed amlogic GPIO driver
[    0.662035@0] register lm device lm-root
[    0.665274@0] register lm device lm1
[    0.668813@0] register lm device lm0
[    0.672553@0] Init pinux probe!
[    0.675970@0] pinmux-m8 pinmux: Probed amlogic pinctrl driver
[    0.681298@0] -------early_init_dt_init:115----------
[    0.686047@0] tv_init_module
[    0.688899@0] major number 254 for disp
[    0.692699@0] vout_register_server
[    0.696051@0] register tv module server ok
[    0.700226@0] aml_i2c version: 20140813
[    0.703956@0] plat->state_name:default
[    0.703972@0] master_no = 0, master_regs=fe600500
[    0.704131@0] aml-i2c i2c-AO: add adapter aml_i2c_adap0(ef36c8a8)
[    0.709941@0] aml-i2c i2c-AO: aml i2c bus driver.
[    0.714804@0] aml_pmu_init, 458
[    0.717775@0] call aml_dvfs_init in
[    0.721219@0] [DVFS]aml_dvfs_probe, child name:vcck_dvfs
[    0.721230@0] [DVFS]dvfs table of vcck_dvfs is:
[    0.721237@0] [DVFS]     freq,    min_uV,    max_uV
[    0.721244@0] [DVFS]    96000,    825000,    825000
[    0.721251@0] [DVFS]   192000,    825000,    825000
[    0.721257@0] [DVFS]   312000,    825000,    825000
[    0.721263@0] [DVFS]   408000,    825000,    825000
[    0.721269@0] [DVFS]   504000,    825000,    825000
[    0.721275@0] [DVFS]   600000,    850000,    850000
[    0.721281@0] [DVFS]   720000,    850000,    850000
[    0.721287@0] [DVFS]   816000,    875000,    875000
[    0.721293@0] [DVFS]  1008000,    925000,    925000
[    0.721299@0] [DVFS]  1200000,    975000,    975000
[    0.721305@0] [DVFS]  1416000,   1025000,   1025000
[    0.721311@0] [DVFS]  1608000,   1100000,   1100000
[    0.721317@0] [DVFS]  1800000,   1125000,   1125000
[    0.721323@0] [DVFS]  1992000,   1150000,   1150000
[    0.721509@0] hdmitx: system: amhdmitx_init
[    0.725291@0] hdmitx: system: Ver: 2014May6
[    0.729505@0] hdmitx: system: amhdmitx_probe
[    0.733918@0] hdmitx: system: not find ao cec
[    0.737969@0] hdmitx: system: not find vend_init_data
[    0.743168@0] hdmitx: system: gate/pwr cmd: 7
[    0.747286@0] hdmitx: system: ALREADY init VIC = 4
[    0.752039@0] hdmitx: system: gate/pwr cmd: 0
[    0.756773@3] hdmitx: system: reset intr mask
[    0.788424@0] hdmitx: system: irq 1
[    0.813118@0] bio: create slab <bio-0> at 0
[    0.814041@0] SCSI subsystem initialized
[    0.815990@0] usbcore: registered new interface driver usbfs
[    0.821303@0] usbcore: registered new interface driver hub
[    0.826718@0] usbcore: registered new device driver usb
[    0.832182@0] pps_core: LinuxPPS API ver. 1 registered
[    0.836864@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.846174@0] PTP clock support registered
[    0.850755@0] mode is 11,sync_duration_den=1,sync_duration_num=60
[    0.856193@0] TV mode 720p selected.
[    0.859722@0] already display in uboot
[    0.863440@0] vinfo mode is: 720p
[    0.869792@0] call aml_pmu_probe_init in
[    0.870680@0] aml_pmus_probe, child name:rn5t618
[    0.875161@0] aml_pmus_probe, i2c_bus:i2c_bus_ao
[    0.880041@0] board_has_battery:false
[    0.883357@0] [DVFS]aml_dvfs_register_driver, driver rn5t618-dvfs regist success, mask:7, source id:1
[    0.883366@0] [RN5T618]ricoh_pmu_probe, 287
[    0.883990@0] [RN5T618]coulomb_flag:0x00
[    0.883996@0] [RN5T618]no saved coulomb counter
[    0.884123@0] ricoh_pmu_probe, 302
[    0.884136@0] Allocate new i2c device: adapter:0, addr:0x32, node name:rn5t618, type:ricoh_pmu
[    0.892439@0] Advanced Linux Sound Architecture Driver Initialized.
[    0.898793@3] hdmitx: system: gate/pwr cmd: 4
[    0.900174@0] Switching to clocksource Timer-E
[    0.906997@0] FS-Cache: Loaded
[    0.921229@0] NET: Registered protocol family 2
[    0.921926@0] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    0.927380@0] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.933910@0] TCP: Hash tables configured (established 4096 bind 4096)
[    0.940381@0] TCP: reno registered
[    0.943689@0] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.949662@0] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.956217@0] NET: Registered protocol family 1
[    0.960723@0] RPC: Registered named UNIX socket transport module.
[    0.966541@0] RPC: Registered udp transport module.
[    0.971390@0] RPC: Registered tcp transport module.
[    0.976201@0] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.982838@0] wifi_dev_probe
[    0.985610@0] wifi_dt : interrupt_pin=GPIOX_21
[    0.990017@0] wifi_dt : irq_num=null
[    0.993538@0] wifi_dt : irq_trigger_type=GPIO_IRQ_HIGH
[    0.998635@0] wifi_dt : power_on_pin=GPIOAO_6
[    1.002946@0] wifi_dt : power_on_pin2=GPIOX_11
[    1.007366@0] interrupt_pin=133, irq_num=4, irq_trigger_type=0, power_on_pin=6,clock_32k_pin=122
[    1.016482@0] Unpacking initramfs...
[    1.032358@0] Freeing initrd memory: 3748K
[    1.034659@0] bounce pool size: 64 pages
[    1.042741@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.044397@0] NFS: Registering the id_resolver key type
[    1.048329@0] Key type id_resolver registered
[    1.052609@0] Key type id_legacy registered
[    1.057801@0] msgmni has been set to 615
[    1.062065@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    1.068174@0] io scheduler noop registered (default)
[    1.073049@0] io scheduler deadline registered
[    1.077776@0] io scheduler cfq registered
[    1.081420@0] io scheduler fiops registered
[    1.091537@0] loop: module loaded
[    1.092772@0] tun: Universal TUN/TAP device driver, 1.6
[    1.094407@0] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.101296@0] ethernet base addr is fe0c0000
[    1.104945@0] key device don't create,extenal_api_key_set_version:2052
[    1.107201@3] hdmitx: system: gate/pwr cmd: 5
[    1.107203@3] hdmitx: edid: edid ready
[    1.107205@3] hdmitx: system: gate/pwr cmd: 4
[    1.123754@0] ret = -22
[    1.123754@0] print_buff=
[    1.128747@0] key device don't create,extenal_api_key_set_version:2052
[    1.135207@0] ret = -22
[    1.135207@0] print_buff=
[    1.140226@0] efuse version is not selected.
[    1.144431@0] ID is not found
[    1.147412@0] stmmac - user ID: 0x11, Synopsys ID: 0x37
[    1.152543@0]  Normal descriptors
[    1.155815@0]  Ring mode enabled
[    1.159018@0]  DMA HW capability register supported
[    1.163667@0]  RX Checksum Offload Engine supported (type 2)
[    1.169455@0]  TX Checksum insertion supported
[    1.173842@0]  Wake-Up On Lan supported
[    1.177674@0]  Enable RX Mitigation via HW Watchdog Timer
[    1.199375@0] libphy: stmmac: probed
[    1.199420@0] eth%d: PHY ID 001cc916 at 0 IRQ 0 (stmmac-0:00) active
[    1.203634@0] eth%d: PHY ID 001cc916 at 1 IRQ POLL (stmmac-0:01) active
[    1.210970@0] PPP generic driver version 2.4.2
[    1.214831@0] PPP BSD Compression module registered
[    1.219428@0] PPP Deflate Compression module registered
[    1.224594@0] PPP MPPE Compression module registered
[    1.229511@0] NET: Registered protocol family 24
[    1.234202@0] usbcore: registered new interface driver asix
[    1.239735@0] usbcore: registered new interface driver ax88179_178a
[    1.245908@0] usbcore: registered new interface driver cdc_ether
[    1.251882@0] usbcore: registered new interface driver smsc95xx
[    1.257732@0] usbcore: registered new interface driver net1080
[    1.263493@0] usbcore: registered new interface driver cdc_subset
[    1.269557@0] usbcore: registered new interface driver zaurus
[    1.275250@0] usbcore: registered new interface driver cdc_ncm
[    1.281029@0] usbcore: registered new interface driver qf9700
[    1.286705@0] usbcore: registered new interface driver sr9600
[    1.292629@0] usbcore: registered new interface driver usb-storage
[    1.298784@0] mousedev: PS/2 mouse device common for all mice
[    1.305381@0] usbcore: registered new interface driver iforce
[    1.311044@0] usbcore: registered new interface driver xpad
[    1.315572@0] i2c /dev entries driver
[    1.317202@3] hdmitx: system: gate/pwr cmd: 5
[    1.317204@3] hdmitx: edid: edid ready
[    1.317210@3] hdmitx: edid: check sum valid
[    1.317212@3] hdmitx: edid: check sum valid
[    1.317215@3] hdmitx: edid: blk0 raw data
[    1.317247@3] 00ffffffffffff004c2d9d02000000002d1001038010098c0ae2bda15b4a9824
[    1.317276@3] 15474a20000001010101010101010101010101010101011d007251d01e206e28
[    1.317305@3] 5500a05a0000001e011d00bc52d01e20b8285540a05a0000001e000000fd0031
[    1.317334@3] 3d0f2e08000a202020202020000000fc0053414d53554e470a2020202020010f
[    1.317335@3]
[    1.317338@3] hdmitx: edid: blk1 raw data
[    1.317367@3] 02031a7146841305140312230907078301000066030c00100080011d8018711c
[    1.317396@3] 1620582c2500a05a0000009e011d80d0721c1620102c2580a05a0000009e8c0a
[    1.317425@3] d08a20e02d10103e9600a05a000000188c0ad090204031200c405500a05a0000
[    1.317453@3] 00180000000000000000000000000000000000000000000000000000000000c0
[    1.317454@3]
[    1.317490@3] hdmitx: edid: find IEEEOUT
[    1.317525@3] hdmitx: video: get current mode: 720p
[    1.317534@3] is_similar_hdmi_vic[326] vic_old=4,mode_new=11
[    1.317538@3] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 4
[    1.317541@3] hdmitx: audio: audio channel num is 0
[    1.317547@3] hdmitx: audio: SPDIF
[    1.317560@3] hdmitx: audio: current VIC: 4
[    1.317562@3] hdmitx: audio: audio sample rate: 0
[    1.317564@3] hdmitx: audio: set audio N para
[    1.317573@3] hdmitx: audio: PCM out to HDMI
[    1.340432@3] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
[    1.340434@3] hdmitx: audio: i2s_to_spdif_flag:1
[    1.340435@3] hdmitx: audio: Enable audio spdif to HDMI
[    1.340497@3] hdmi detect: plug.
[    1.469470@0] device-mapper: uevent: version 1.0.3
[    1.473916@0] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[    1.482784@0] hidraw: raw HID events driver (C) Jiri Kosina
[    1.488052@0] usbcore: registered new interface driver usbhid
[    1.493338@0] usbhid: USB HID core driver
[    1.497810@0] zram: Created 1 device(s) ...
[    1.501869@0] ashmem: initialized
[    1.504910@0] logger: created 256K log 'log_main'
[    1.509583@0] logger: created 256K log 'log_events'
[    1.514387@0] logger: created 256K log 'log_radio'
[    1.519161@0] logger: created 256K log 'log_system'
[    1.523864@0] vout_init_module
[    1.526870@0] start init vout module
[    1.530442@0] create  vout attribute ok
[    1.534300@0] ge2d_init
[    1.536560@0] ge2d_dev major:245
[    1.540004@0] ge2d start monitor
[    1.542978@0] osd_init
[    1.542984@3] ge2d workqueue monitor start
[    1.549364@0] osd_probe, vinfo:c0670ea0
[    1.553768@0] Frame buffer memory assigned at phy:0x06100000, vir:0xf1000000, size=73728K
[    1.561231@0] osd_probe, mydef_var:c0906698, vinfo:c0670ea0
[    1.566739@0] init fbdev bpp is :32
[    1.570202@0] ---------------clear framebuffer0 memory
[    1.626955@0] Console: switching to colour frame buffer device 240x67
[    1.668602@0] Frame buffer memory assigned at phy:0x0a900000, vir:0xf0600000, size=1024K
[    1.671187@0] osd_probe, mydef_var:c0906698, vinfo:c0670ea0
[    1.676705@0] don't find to display_size_default from mesonfb-dts
[    1.682756@0] init fbdev bpp is :24
[    1.701833@0] osd probe ok
[    1.702117@0] enter aml_sysled_init
[    1.702493@0] enter aml_sysled_probe
[    1.705962@0] start read sedio dts
[    1.709427@0] sysled pdata->name:aml-setio
[    1.713467@0] sysled pdata->red_led_mode:1
[    1.717535@0] sysled pdata->blue_led_mode:1
[    1.721666@0] red_led_gpio is 135
[    1.724937@0] blue_led_gpio is 135
[    1.728934@0] DI: di_init
[    1.728968@0] DI: di_probe
[    1.729468@0] aml_wdt_driver_init,306
[    1.731923@0] ** disable watchdog
[    1.735452@0] keys===========================================
[    1.740932@0] keys_devno=f200000
[    1.744328@0] securitykey: device aml_keys created
[    1.748869@0] amlkeys=0
[    1.751353@0] platform_driver_register--aml_keys_driver--------------------
[    1.758507@0] set uart_ao pinmux use pinctrl subsystem
[    1.763232@0] P_AO_RTI_PIN_MUX_REG:5860
[    1.767075@0] start uart_ao_ttyS0:(irq = 122)
[    1.771345@0] register uart_ao ok
[    1.774886@0] set uart_a pinmux use pinctrl subsystem
[    1.779653@0] P_AO_RTI_PIN_MUX_REG:5860
[    1.783430@0] start uart_a_ttyS1:(irq = 58)
[    1.787586@0] register uart_a ok
[    1.791021@0] start uart_d_ttyS4:(irq = 126)
[    1.794972@0] register uart_d ok
[    1.798382@0] dwc_otg: version 3.10a 12-MAY-2014
[    1.802760@0] dwc_otg_driver_probe NOT match
[    1.807024@0] usb1: type: 1, speed: 0, config: 0, dma: 0, id: 1, phy: fe108820, ctrl: fe080000
[    1.815508@0] USB (1) use clock source: XTAL input
[    1.841368@0] Core Release: 3.10a
[    1.841472@0] Setting default values for core params
[    1.844044@0] curmode: 1, host_only: 1
[    1.868972@0] Using Buffer DMA mode
[    1.873713@0] OTG VER PARAM: 1, OTG VER FLAG: 1
[    1.878504@0] Working on port type = HOST
[    1.883285@0] dwc_otg lm1: DWC OTG Controller
[    1.888055@0] dwc_otg lm1: new USB bus registered, assigned bus number 1
[    1.893806@0] dwc_otg lm1: irq 63, io mem 0x00000000
[    1.898723@0] -------hcd->flags.d32 = 0
[    1.903384@0] Init: Port Power? op_state=1
[    1.908023@0] Init1: Power Port (0)
[    1.912734@0] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.918753@0] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.926054@0] usb usb1: Product: DWC OTG Controller
[    1.930906@0] usb usb1: Manufacturer: Linux 3.10.108 dwc_otg_hcd
[    1.936858@0] usb usb1: SerialNumber: lm1
[    1.942219@0] hub 1-0:1.0: USB hub found
[    1.947087@0] hub 1-0:1.0: 1 port detected
[    1.952133@0] usb0: type: 0, speed: 0, config: 0, dma: 0, id: 0, phy: fe108800, ctrl: fe040000
[    1.960078@0] USB (0) use clock source: XTAL input
[    1.986117@0] Core Release: 3.10a
[    1.991148@0] Setting default values for core params
[    1.996235@0] curmode: 1, host_only: 0
[    2.061457@0] Using Buffer DMA mode
[    2.066519@0] OTG VER PARAM: 1, OTG VER FLAG: 1
[    2.071645@0] Working on port type = OTG
[    2.076687@0] Current port type: SLAVE
[    2.081700@0] dwc_otg lm0: DWC OTG Controller
[    2.086669@0] dwc_otg lm0: new USB bus registered, assigned bus number 2
[    2.092701@0] dwc_otg lm0: irq 62, io mem 0x00000000
[    2.097736@0] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.104487@0] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.111832@0] usb usb2: Product: DWC OTG Controller
[    2.116724@0] usb usb2: Manufacturer: Linux 3.10.108 dwc_otg_hcd
[    2.122613@0] usb usb2: SerialNumber: lm0
[    2.127967@0] hub 2-0:1.0: USB hub found
[    2.132816@0] hub 2-0:1.0: 1 port detected
[    2.137853@0] Dedicated Tx FIFOs mode
[    2.142837@0] using timer detect id change, ef37f000
[    2.147813@2] Indeed it is in host mode hprt0 = 00021501
[    2.147998@0] boot_device_flag : -1
[    2.148001@0] do not init nand
[    2.148138@0] boot_device_flag : -1
[    2.150350@0] Amlogic A/V streaming port init
[    2.152177@0] buffersize=262144,0,start=0
[    2.152188@0] Subtitle stbuf alloced at 0xee880000, size = 262144
[    2.152191@0] changed the (2) buffer size from 0 to 262144
[    2.152485@0] init vdec memsource ca00000->1c9fffff
[    2.152723@0] [tsync_pcr_init]init success.
[    2.152725@0] amvideocap_init_module
[    2.152773@0] amvideocap_probe,amvideocap
[    2.152781@0] amvideocap_dev_register buf:1f300000,size:800000.
[    2.153250@0] regist mpeg12 codec profile
[    2.153357@0] regist mpeg4 codec profile
[    2.153359@0] amvdec_vc1 module init
[    2.153468@0] regist vc1 codec profile
[    2.153470@0] amvdec_h264 module init
[    2.153613@0] regist h264 codec profile
[    2.153615@0] amvdec_h264mvc module init
[    2.153723@0] regist hmvc codec profile
[    2.153725@0] amvdec_h264_4k2k module init
[    2.153835@0] regist h264_4k2k codec profile
[    2.153837@0] amvdec_h265 module init
[    2.153944@0] regist hevc codec profile
[    2.154052@0] regist mjpeg codec profile
[    2.154054@0] amvdec_real module init
[    2.154161@0] amvdec_avs module init
[    2.154411@0] amvenc_avc memory resource undefined.
[    2.154413@0] amvenc_avc memory is invaild, probe fail!
[    2.154423@0] amvenc_avc: probe of amvenc_avc.0 failed with error -14
[    2.154565@0] jpegenc module init
[    2.154999@0] picdec buffer size is 4000000
[    2.155218@0] alloc_keep_buffer keep_y_addr ee200000
[    2.155234@0] alloc_keep_buffer keep_u_addr ee900000
[    2.155244@0] alloc_keep_buffer keep_v_addr ede00000
[    2.155248@0] yaddr=ee200000,u_addr=ee900000,v_addr=ede00000
[    2.155622@0] create_ge2d_work_queue video task ok
[    2.156125@0] efuse===========================================
[    2.156371@0] efuse: device efuse created
[    2.156498@0] efuse--------------------------------------------
[    2.156500@0] SARADC Driver init.
[    2.156675@0] __saradc_probe__
[    2.296951@1] saradc calibration: ref_val = 515
[    2.296954@1] saradc calibration: ref_nominal = 512
[    2.296956@1] saradc calibration: coef = 4072
[    2.297390@1] ir irblaster probe
[    2.297732@1] Remote Driver
[    2.297821@1] Remote platform_data g_remote_base=fe600580
[    2.297849@1] set drvdata completed
[    2.297857@1] device_create_file completed
[    2.298298@1] input: aml_keypad as /devices/platform/meson-remote/input/input0
[    2.298621@1] input_register_device completed
[    2.298670@1] [0xffffff00] = 0x1dd0190
[    2.298673@1] [0xffffff04] = 0xf800ca
[    2.298676@1] [0xffffff08] = 0x82006e
[    2.298678@1] [0xffffff0c] = 0x3c0030
[    2.298680@1] [0xffffff10] = 0x30fa0013
[    2.298682@1] [0xffffff18] = 0x6f19000
[    2.298685@1] [0xffffff1c] = 0xbe40
[    2.298687@1] [0x0] = 0xfa00a0
[    2.298689@1] [0x4] = 0xfa00a0
[    2.298691@1] [0x8] = 0xfa00a0
[    2.298693@1] [0xc] = 0x640030
[    2.298695@1] [0x10] = 0x30fa0013
[    2.298697@1] [0x18] = 0x961b800
[    2.298700@1] [0x1c] = 0x9740
[    2.298702@1] [0x20] = 0x104
[    2.298703@1] [0x24] = 0x0
[    2.298705@1] [0x28] = 0x0
[    2.298708@1] set_remote_mode[69]
[    2.298727@1] remote config major:236
[    2.298962@1] physical address:0x2f5b6000
[    2.299065@1] Meson KeyInput init
[    2.299238@1] GPIO Keypad Driver init.
[    2.299312@1] ==gpio_key_probe==
[    2.299316@1] gpio request set to High-Z status
[    2.299337@1]  reg:2620,clearmask=400040,setmask=1
[    2.299341@1] reg:2622,clearmask=ff0000,set pin=3
[    2.299345@1] reg:2623,clearmask=7000000,setmask=7
[    2.299349@1]  reg:2620,clearmask=800080,setmask=10001
[    2.299352@1] reg:2622,clearmask=ff000000,set pin=3
[    2.299355@1] reg:2623,clearmask=70000000,setmask=7
[    2.299381@1] power key(116) registed.
[    2.299596@1] input: gpio_keypad as /devices/platform/gpio_keypad.6/input/input1
[    2.299757@1] gpio keypad register input device completed.
[    2.299764@1] gpio keypad major:235
[    2.300094@1] spi_nor_init
[    2.300244@1] amlogic_spi_nor_probe:
[    2.300250@1] amlogic_spi->state_name:default
[    2.300405@1] AMLOGIC_SPI_NOR cc000000.spi: master is unqueued, this is deprecated
[    2.300543@1] check_storage_device : spi boot_device_flag : -1
[    2.300545@1] spi_nor_probe
[    2.300549@1] spi_nor_probe 629 boot_device_flag 2 : do not init spi
[    2.300559@1] spi_nor: probe of apollospi:32766 failed with error -12
[    2.300564@1] amlogic_spi_nor_probe over
[    2.300750@1] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error
[    2.300900@1] host->base fe108c20
[    2.300938@1] pdata->caps 7
[    2.300941@1] pdata->caps2 0
[    2.300946@1] get property:                     port, value:0x00000001
[    2.300950@1] get property:                ocr_avail, value:0x00200000
[    2.300953@1] get property:                    f_min, value:0x000493e0
[    2.300956@1] get property:                    f_max, value:0x02faf080
[    2.300960@1] get property:                  f_max_w, value:0x02faf080
[    2.300963@1] get property:             max_req_size, value:0x00020000
[    2.300966@1] get property:                   irq_in, value:0x00000003
[    2.300971@1] get property:                  irq_out, value:0x00000005
[    2.300978@1] get property:                  gpio_cd, str:CARD_6
[    2.300984@1] get property:                  pinname, str:sd
[    2.300988@1] get property:                 jtag_pin, str:CARD_0
[    2.300992@1] get property:                card_type, value:0x00000005
[    2.300995@1] get property:                gpio_dat3, str:CARD_4
[    2.301011@1] normal card in
[    2.336859@3] sd: mmc_rescan_try_freq: trying to init card at 400000 Hz
[    2.338065@3]  reg:2620,clearmask=80008,setmask=10001
[    2.338070@3] reg:2621,clearmask=ff000000,set pin=64
[    2.338073@3] reg:2623,clearmask=7000,setmask=7
[    2.338077@3]  reg:2620,clearmask=200020,setmask=1
[    2.338080@3] reg:2622,clearmask=ff00,set pin=64
[    2.338083@3] reg:2623,clearmask=700000,setmask=7
[    2.340259@3] pdata->caps 107
[    2.340262@3] pdata->caps2 0
[    2.340266@3] get property:                     port, value:0x00000000
[    2.340270@3] get property:                ocr_avail, value:0x00200000
[    2.340273@3] get property:                    f_min, value:0x000493e0
[    2.340277@3] get property:                    f_max, value:0x02faf080
[    2.340281@3] get property:             max_req_size, value:0x00020000
[    2.340289@3] get property:                  pinname, str:sdio
[    2.340293@3] get property:                card_type, value:0x00000003
[    2.795075@3] sd: new high speed SDHC card at address 0001, clock 35416666, 4-bit-bus-width
[    2.802453@3] mmcblk0: sd:0001 00000 29.2 GiB
[    2.827565@0]  mmcblk0: p1 p2
[    2.946856@1] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    2.946873@2] [aml_sdio_probe] aml_sdio_probe() success!
[    2.949093@3] host->base fe108e00
[    2.949159@3] pdata->caps 80000547
[    2.949167@3] pdata->caps2 20
[    2.949172@3] get property:                     port, value:0x00000005
[    2.949176@3] get property:                ocr_avail, value:0x00200080
[    2.949179@3] get property:                    f_min, value:0x000493e0
[    2.949182@3] get property:                    f_max, value:0x05f5e100
[    2.949187@3] get property:             max_req_size, value:0x00020000
[    2.949196@3] get property:                  pinname, str:emmc
[    2.949200@3] get property:                card_type, value:0x00000001
[    2.949205@3] get property:                gpio_dat3, str:BOOT_3
[    2.949210@3] [is_emmc_exist] host->storage_flag=2, POR_BOOT_VALUE=3
[    2.986853@2] emmc: mmc_rescan_try_freq: trying to init card at 400000 Hz
[    2.986857@2] aml_emmc_hw_reset 1338
[    2.994604@3] mmc_init_card
[    3.041110@3] Indeed it is in host mode hprt0 = 00001101
[    3.090052@0] emmc: BKOPS_EN bit is not set
[    3.094895@0] Activate high speed
[    3.100513@0] emmc: new high speed MMC card at address 0001, clock 47222222, 8-bit-bus-width
[    3.108009@2] mmcblk1: emmc:0001 NCard  7.21 GiB
[    3.112493@2] mmcblk1boot0: emmc:0001 NCard  partition 1 4.00 MiB
[    3.116842@3] [aml_sdhc_probe] aml_sdhc_probe() success!
[    3.117032@3] [dsp]DSP start addr 0xc5e00000
[    3.117057@3] [dsp]register dsp to char divece(257)
[    3.117626@3] amlogic audio spdif interface device init!
[    3.117703@3] device name=nand_key open error
[    3.117708@3] aml_keys: version 0 can not be init c090aac4
[    3.117710@3] device name=emmc_key open error
[    3.117713@3] aml_keys: version 0 can not be init c090aac4
[    3.118416@3] aml_rtc rtc.0: rtc core: registered aml_rtc as rtc0
[    3.121009@3] [RN5T618]call rn5t618_battery_probe in
[    3.121010@3] [RN5T618]no special flag, clear RTC mem, force using ocv
[    3.121854@3] input: rn5t618_pmu as /devices/i2c-0/0-0032/rn5t618_pmu.0/input/input2
[    3.122041@3] [RN5T618]use BSP configed battery parameters
[    3.122044@3] [RN5T618] NO BATTERY_PARAMETERS FOUND
[    3.127692@0] [RN5T618]call rn5t618_battery_probe exit, ret:0
[    3.127694@0] [RN5T618]call rn5t618_battery_init, ret = 0
[    3.128991@0] amaudio2: device amaudio2 created
[    3.129137@0] Amlogic CEC Driver, (c) 2016 Gerald Dachs, Version: 0.0.1
[    3.129370@0] Error: Didn't get power valid value --- wifi_power_probe 323
[    3.129376@0] wifi_power power_gpio is 6
[    3.129382@0] wifi_power power_gpio2 is 123
[    3.129744@0] bcmdhd_wlan_init()
[    3.129753@0] 1 bcmdhd_init_wlan_mem: wlan_static_skb[0]=ef33e300, size=3760
[    3.129758@0] 1 bcmdhd_init_wlan_mem: wlan_static_skb[1]=ef33e540, size=3760
[    3.129762@0] 1 bcmdhd_init_wlan_mem: wlan_static_skb[2]=ef33e600, size=3760
[    3.129766@0] 1 bcmdhd_init_wlan_mem: wlan_static_skb[3]=ef33e6c0, size=3760
[    3.129774@0] 1 bcmdhd_init_wlan_mem: wlan_static_skb[4]=ef33e780, size=3760
[    3.129778@0] 1 bcmdhd_init_wlan_mem: wlan_static_skb[5]=ef33e840, size=3760
[    3.129782@0] 1 bcmdhd_init_wlan_mem: wlan_static_skb[6]=ef33e900, size=3760
[    3.129786@0] 1 bcmdhd_init_wlan_mem: wlan_static_skb[7]=ef33e9c0, size=3760
[    3.129792@0] 2 bcmdhd_init_wlan_mem: wlan_static_skb[8]=ef33ea80, size=7856
[    3.129796@0] 2 bcmdhd_init_wlan_mem: wlan_static_skb[9]=ef33eb40, size=7856
[    3.129801@0] 2 bcmdhd_init_wlan_mem: wlan_static_skb[10]=ef33ec00, size=7856
[    3.129808@0] 2 bcmdhd_init_wlan_mem: wlan_static_skb[11]=ef33ecc0, size=7856
[    3.129812@0] 2 bcmdhd_init_wlan_mem: wlan_static_skb[12]=ef33ed80, size=7856
[    3.129815@0] 2 bcmdhd_init_wlan_mem: wlan_static_skb[13]=ef33ee40, size=7856
[    3.129819@0] 2 bcmdhd_init_wlan_mem: wlan_static_skb[14]=ef33ef00, size=7856
[    3.129825@0] 2 bcmdhd_init_wlan_mem: wlan_static_skb[15]=ef33e240, size=7856
[    3.129830@0] 3 bcmdhd_init_wlan_mem: wlan_static_skb[16]=ef33e180, size=16048
[    3.129836@0] 4 bcmdhd_init_wlan_mem: wlan_mem_array[0]=ef33e300, size=20504
[    3.129841@0] 4 bcmdhd_init_wlan_mem: wlan_mem_array[1]=ef33e540, size=20504
[    3.129847@0] 4 bcmdhd_init_wlan_mem: wlan_mem_array[2]=ef33e600, size=81944
[    3.129855@0] 4 bcmdhd_init_wlan_mem: wlan_mem_array[3]=ef33e6c0, size=163864
[    3.129860@0] 4 bcmdhd_init_wlan_mem: wlan_mem_array[4]=ef33e780, size=20504
[    3.129865@0] 5 bcmdhd_init_wlan_mem: wlan_static_scan_buf0=ee7d0000, size=65536
[    3.129870@0] 6 bcmdhd_init_wlan_mem: wlan_static_scan_buf1=ef380000, size=65536
[    3.129873@0] bcmdhd_init_wlan_mem: WIFI MEM Allocated
[    3.129875@0] amlogic rfkill init
[    3.129880@0] Error: Driver 'bt-dev' is already registered, aborting...
[    3.130127@0] UMP: UMP device driver -679583e loaded
[    3.130429@0] aml_aes aml_aes: Aml AES
[    3.130843@0] aml_tdes aml_tdes: Aml TDES
[    3.131681@0] enter rt5616_modinit
[    3.131929@0] dummy_codec_platform_probe
[    3.132206@0] == ES8323 == es8323_modinit()
[    3.132737@0] enter aml_i2s_dai_probe
[    3.132741@0] i2s get no clk src setting in dts, use the default mpll 0
[    3.132751@0] [aml-i2s-dai]enterd aml_i2s_dai_probe,old_samplerate:0,sample_rate=48000
[    3.132952@0] enter aml_pcm_dai_probe
[    3.133062@0] [aml-spdif-dai]enter aml_dai_spdif_init
[    3.133068@0] [aml-spdif-dai]enterd aml_spdif_play,set_clock:-1,sample_rate=4
[    3.133070@0] audio_set_958_clk, freq=4,
[    3.133078@0] IEC958 16bit
[    3.133082@0] hdmitx: audio: aout notify rate 48000
[    3.133084@0] hdmitx: audio: aout notify size 16
[    3.133087@0] hdmitx: audio: aout notify format CT_PCM
[    3.133092@0] hdmitx: audio: audio channel num is 1
[    3.133098@0] hdmitx: audio: SPDIF
[    3.133109@0] hdmitx: audio: current VIC: 4
[    3.133111@0] hdmitx: audio: audio sample rate: 3
[    3.133113@0] hdmitx: audio: set audio N para
[    3.133121@0] hdmitx: audio: PCM out to HDMI
[    3.133124@0] hdmitx: audio: i2s_to_spdif_flag:1
[    3.133125@0] hdmitx: audio: Enable audio spdif to HDMI
[    3.133131@0] hdmitx: audio: Audio Type: PCM
[    3.133180@0] hdmitx: audio: set audio param
[    3.133254@0] [aml-spdif-dai]aml_spdif_probe
[    3.133455@0] test codec dummy_codec
[    3.133460@0] using external codec, index = 1
[    3.133462@0] using external dummy codec
[    3.133630@0] enter spdif_dit_probe
[    3.133632@0] aml_spdif_unmute
[    3.133869@0] codec_name = dummy_codec.0
[    3.134151@0] enter aml_asoc_init
[    3.134173@0] p_aml_audio->hp_disable=1
[    3.134176@0] falied to get spk event delay time paraments from dts file
[    3.134179@0] spk_event delay_time = 0
[    3.136182@0] aml-i2s 0:playback preallocate_dma_buffer: area=f0701000, addr=2e300000, size=524288
[    3.136662@0] aml-i2s 1:capture preallocate_dma_buffer: area=f0783000, addr=2e200000, size=65536
[    3.136692@0] aml_snd_m8 aml_m8_sound_card.5:  dummy_codec <-> aml-i2s-dai.0 mapping ok
[    3.138770@0] aml-i2s 0:playback preallocate_dma_buffer: area=f07a4000, addr=2dc00000, size=524288
[    3.139247@0] aml-i2s 1:capture preallocate_dma_buffer: area=f0826000, addr=2e3c0000, size=65536
[    3.139272@0] aml_snd_m8 aml_m8_sound_card.5:  dit-hifi <-> aml-spdif-dai.0 mapping ok
[    3.140514@0] -----ext_codec=1---
[    3.140531@0] =aml_m8_pinmux_init==,aml_m8_pinmux_init done,---0
[    3.140872@1] TCP: cubic registered
[    3.141514@1] NET: Registered protocol family 10
[    3.142242@3] NET: Registered protocol family 17
[    3.142266@3] NET: Registered protocol family 15
[    3.142359@3] Key type dns_resolver registered
[    3.238159@1] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610
[    3.238167@1] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.238173@1] usb 1-1: Product: USB2.0 Hub
[    3.238928@1] hub 1-1:1.0: USB hub found
[    3.239221@1] hub 1-1:1.0: 4 ports detected
[    3.517122@1] usb 1-1.2: new full-speed USB device number 3 using dwc_otg
[    3.619844@1] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c52b
[    3.619852@1] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.619857@1] usb 1-1.2: Product: USB Receiver
[    3.619862@1] usb 1-1.2: Manufacturer: Logitech
[    3.686577@2] mmcblk1boot1: emmc:0001 NCard  partition 2 4.00 MiB
[    3.687844@2]  mmcblk1: p1
[    3.688285@2] Delete invalid mbr partition part ef484800, part->partno 1
[    3.688847@0] emmc read lba=0x12000, blocks=0x1 OK!
[    3.689253@0] emmc read lba=0x12001, blocks=0x1 OK!
[    3.689259@0] [mmc_read_partition_tbl] mmc read partition OK!
[    3.689260@0] add_emmc_partition
[    3.689473@0] [mmcblk1p01]           bootloader  offset 0x000000000000, size 0x000000400000
[    3.689661@0] [mmcblk1p02]             reserved  offset 0x000002400000, size 0x000004000000
[    3.689838@0] [mmcblk1p03]                cache  offset 0x000006c00000, size 0x000020000000
[    3.690009@0] [mmcblk1p04]                  env  offset 0x000027400000, size 0x000000800000
[    3.690187@0] [mmcblk1p05]                 logo  offset 0x000028400000, size 0x000002000000
[    3.690354@0] [mmcblk1p06]             recovery  offset 0x00002ac00000, size 0x000002000000
[    3.690528@0] [mmcblk1p07]                 misc  offset 0x00002d400000, size 0x000002000000
[    3.690696@0] [mmcblk1p08]                 boot  offset 0x00002fc00000, size 0x000002000000
[    3.690875@0] [mmcblk1p09]               system  offset 0x000032400000, size 0x000060000000
[    3.691046@0] [mmcblk1p10]                 data  offset 0x000092c00000, size 0x00013b500000
[    3.691075@0] card key: card_blk_probe.
[    3.691081@0] emmc_key_init:428 emmc key lba_start:0x12020,lba_end:0x12220
[    3.691086@0] i=0,register --- emmc_key
[    3.691089@0] emmc key: emmc_key_init:450 ok.
[    3.691182@0] Exit aml_emmc_partition_ops OK.
[    3.692451@0]  mmcblk1boot1: p1
[    3.686370@0] VFP support v0.3:
[    3.692472@0] mmcblk1boot1: p1 start 16065 is beyond EOD, truncated
[    3.693904@0]  mmcblk1boot0: p1
[    3.693919@0] mmcblk1boot0: p1 start 16065 is beyond EOD, truncated
[    3.858419@3] implementor 41 architecture 3 part 30 variant 9 rev 4
[    3.868886@3] Registering SWP/SWPB emulation handler
[    3.873965@3] enter meson_pm_init
[    3.879497@3] enter meson_pm_probe!
[    3.884563@3] meson_pm_probe done !
[    3.890787@3] regulator-dummy: disabling
[    3.896246@3] console [netcon0] enabled
[    3.901341@3] netconsole: network logging started
[    3.906903@3] aml_rtc rtc.0: setting system clock to 1970-01-01 00:00:00 UTC (0)
[    3.913942@3] meson_cpufreq: no voltage_control prop
[    3.919206@3] voltage_control = 0
[    3.925624@3] buf[0]=f5,buf[1]=af,err=4
[    3.928137@3] M8M2:adc=383,TS_C=21,flag=1
[    3.930600@3] efuse_flag=a
[    3.933049@3] amlogic_thermal_probe, this chip is trimmed, use thermal
[    3.939390@3] amlogic-thermal aml_thermal: amlogic thermal probe start
[    3.945853@3] #thermal-cells=7
[    3.948875@3] pdata->temp_trip_count=4
[    3.952584@3] temperature=70000 on trip point=0
[    3.957071@3] fixing high_freq=1608001 to 1608000 at trip point 0,level=2
[    3.963790@3] fixing low_freq=1608001 to 1608000 at trip point 0,level=2
[    3.970432@3] gpu[0].gpu_high_freq=511,tmp_level[0].gpu_high_freq=511
[    3.976816@3] cpu[0] core num==3
[    3.980011@3] gpu[0] core num==5
[    3.983197@3] temperature=80000 on trip point=1
[    3.987686@3] fixing high_freq=1200001 to 1200000 at trip point 1,level=6
[    3.994409@3] fixing low_freq=1200001 to 1200000 at trip point 1,level=6
[    4.001051@3] gpu[1].gpu_high_freq=435,tmp_level[1].gpu_high_freq=435
[    4.007438@3] cpu[1] core num==2
[    4.010624@3] gpu[1] core num==4
[    4.013815@3] temperature=90000 on trip point=2
[    4.018305@3] fixing high_freq=800001 to 696000 at trip point 2,level=11
[    4.024941@3] fixing low_freq=800001 to 696000 at trip point 2,level=11
[    4.031497@3] gpu[2].gpu_high_freq=328,tmp_level[2].gpu_high_freq=328
[    4.037895@3] cpu[2] core num==2
[    4.041070@3] gpu[2] core num==3
[    4.044262@3] temperature=260000 on trip point=3
[    4.048837@3] fixing high_freq=-1 to -22 at trip point 3,level=-1
[    4.054871@3] fixing low_freq=-1 to -22 at trip point 3,level=-1
[    4.060822@3] gpu[3].gpu_high_freq=-1,tmp_level[3].gpu_high_freq=-1
[    4.067036@3] cpu[3] core num==-1
[    4.070309@3] gpu[3] core num==-1
[    4.073587@3] idle interval=1000
[    4.076778@3] pdata->name:aml_thermal
[    4.080711@3] tmp_trip[0].cpu_core_upper=1
[    4.084461@3] tmp_trip[1].cpu_core_upper=2
[    4.088519@3] tmp_trip[2].cpu_core_upper=2
[    4.092567@3] tmp_trip[3].cpu_core_upper=-1
[    4.096707@3] aml_thermal bind thermal-cpucore-0 okay !
[    4.101907@3] aml_thermal bind thermal-cpufreq-0 okay !
[    4.107182@3] amlogic: Kernel Thermal management registered
[    4.112574@3] amlogic-thermal aml_thermal: amlogic thermal probe done
[    4.119076@3] ALSA device list:
[    4.122061@3]   #0: AML-M8AUDIO
[    4.125304@3] Freeing unused kernel memory: 192K
[    4.155050@2] tvmode set to 720p
[    4.155050@2]
[    4.155065@2] don't set the same mode as current.
[    4.234376@2] vfm_map_store:rm default
[    4.234376@2]
[    4.234509@2] vfm_map_store:add default decoder ppmgr deinterlace amvideo
[    4.234509@2]
[    4.267354@1] Checking disk(s):  LABEL=LIBREELEC LABEL=STORAGE
[    5.129893@0] [RN5T618]battery vol change: 0->0
[    8.978605@2] fsck: CP437: Invalid argument
[    8.980010@2] fsck: fsck.fat 4.1 (2017-01-24)
[    8.981838@2] fsck: /dev/mmcblk0p1: 10 files, 17156/65501 clusters
[    8.983187@2] fsck: STORAGE: recovering journal
[    8.985291@2] fsck: STORAGE: clean, 3837/7544832 files, 1018418/30175232 blocks
[    9.669638@2] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (2c0)
[    9.670318@2] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (2c0)
[    9.670997@2] force enable DISCARD here for ext4 fs
[    9.937777@0] checked enable EXT4 DISCARD here
[    9.937785@0] EXT4-fs (mmcblk0p2): mounting with "discard" option, but the device does not support discard
[    9.937791@0] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[   10.632238@1] systemd[1]: System time before build time, advancing clock.
[   10.697098@1] systemd[1]: systemd 242 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
[   10.697328@1] systemd[1]: Detected architecture arm.
[   10.697601@1] systemd[1]: Set hostname to <LibreELEC>.
[   10.759010@1] systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[   10.759027@1] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[   10.857318@1] systemd[1]: Created slice User and Session Slice.
[   10.857873@1] systemd[1]: Listening on Journal Socket.
[   10.858934@1] systemd[1]: Mounting POSIX Message Queue File System...
[   10.860064@1] systemd[1]: Starting Create Persistent Log Directory on /storage...
[   10.861213@1] systemd[1]: Starting Setup NTP servers for timesyncd...
[   10.861537@1] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[   10.862278@1] systemd[1]: Listening on RPCbind Server Activation Socket.
[   10.862367@1] systemd[1]: Reached target RPC Port Mapper.
[   10.863354@1] systemd[1]: Mounting Variable Directory...
[   10.864655@1] systemd[1]: Mounting Kernel Debug File System...
[   10.865263@1] systemd[1]: Listening on udev Kernel Socket.
[   10.878762@1] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[   10.878981@1] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   10.879187@1] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
[   10.880244@1] systemd[1]: Starting Wait For Kernel Time Synchronized...
[   10.880791@1] systemd[1]: Listening on udev Control Socket.
[   10.881045@1] systemd[1]: Listening on initctl Compatibility Named Pipe.
[   10.882209@1] systemd[1]: Starting Debug Shell on /dev/ttyS0...
[   10.882521@1] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   10.882616@1] systemd[1]: Reached target Paths.
[   10.883006@1] systemd[1]: Listening on Journal Socket (/dev/log).
[   10.883099@1] systemd[1]: Reached target Slices.
[   10.884178@1] systemd[1]: Starting Show Version...
[   10.896859@2] Changing uart_ao_ttyS0: baud from 0 to 115200
[   10.903238@0] systemd[1]: Mounted POSIX Message Queue File System.
[   10.903741@0] systemd[1]: Mounted Variable Directory.
[   10.904190@0] systemd[1]: Mounted Kernel Debug File System.
[   10.906022@0] systemd[1]: Starting Create kernel modules tree from overlays...
[   10.908965@0] systemd[1]: Started Show Version.
[   10.918486@2] systemd[1]: Started Create Persistent Log Directory on /storage.
[   10.919213@2] systemd[1]: Condition check resulted in Persistent Log Storage being skipped.
[   10.920780@2] systemd[1]: Started Debug Shell on /dev/ttyS0.
[   10.955261@1] systemd[1]: Started Setup NTP servers for timesyncd.
[   10.990260@0] kernel-overlays-setup: setup base modules
[   11.018971@0] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/3.10.108
[   11.058018@0] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware
[   11.058144@0] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays
[   11.064643@1] kernel-overlays-setup: done
[   11.065580@3] systemd[1]: kernel-overlays.service: Succeeded.
[   11.065742@3] systemd[1]: Started Create kernel modules tree from overlays.
[   11.067427@3] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   11.070219@0] systemd[1]: Starting Load Kernel Modules...
[   11.070545@0] systemd[1]: Condition check resulted in Mounting swapfile being skipped.
[   11.070662@0] systemd[1]: Reached target Swap.
[   11.072028@0] systemd[1]: Mounting Temporary Directory (/tmp)...
[   11.073459@0] systemd[1]: Starting udev Coldplug all Devices...
[   11.075213@0] systemd[1]: Starting Setup machine-id...
[   11.079773@0] systemd[1]: Mounted Temporary Directory (/tmp).
[   11.080152@0] systemd[1]: Reached target Local File Systems.
[   11.082093@0] systemd[1]: Started Create list of required static device nodes for the current kernel.
[   11.159868@2] systemd[1]: Started Setup machine-id.
[   11.161627@2] systemd[1]: Starting Journal Service...
[   11.163007@2] systemd[1]: Starting Create Static Device Nodes in /dev...
[   11.213144@1] Linux video capture interface: v2.00
[   11.224715@1] systemd[1]: Started Create Static Device Nodes in /dev.
[   11.239696@1] systemd[1]: Started Journal Service.
[   11.247669@3] amlvideo-000: V4L2 device registered as video10
[   11.255873@0] pdata->tmp_trip[0].gpu_lower_level=1
[   11.255881@0] pdata->tmp_trip[0].gpu_upper_level=1
[   11.255896@0] pdata->tmp_trip[1].gpu_lower_level=2
[   11.255899@0] pdata->tmp_trip[1].gpu_upper_level=2
[   11.255907@0] pdata->tmp_trip[2].gpu_lower_level=3
[   11.255910@0] pdata->tmp_trip[2].gpu_upper_level=3
[   11.255917@0] pdata->tmp_trip[3].gpu_lower_level=-1
[   11.255920@0] pdata->tmp_trip[3].gpu_upper_level=-1
[   11.255928@0] aml_thermal bind thermal-gpufreq-0 okay !
[   11.255932@0] gpu cooling register okay with err=0
[   11.256011@0] tmp_trip[0].gpu_core_upper=1
[   11.256022@0] tmp_trip[1].gpu_core_upper=2
[   11.256031@0] tmp_trip[2].gpu_core_upper=3
[   11.256038@0] tmp_trip[3].gpu_core_upper=-1
[   11.256046@0] aml_thermal bind thermal-gpucore-0 okay !
[   11.256049@0] gpu core cooling register okay with err=0
[   11.256130@0] Mali: Mali device driver loaded
[   11.261269@3] systemd-journald[1398]: Received request to flush runtime journal from PID 1
[   11.278986@3] wireguard: WireGuard 1.0.20200908 loaded. See www.wireguard.com for information.
[   11.278995@3] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[   12.473465@0] Console: switching to colour dummy device 80x30
[   12.557227@3] wifi_setup_dt
[   12.557239@3] wifi_request_32k_clk : OFF-->ON for sdio_wifi
[   12.557243@3] clock_32k_pin(122) : (null)
[   12.557256@3] clock_32k_pin(122) : sdio_wifi
[   12.557460@3] interrupt_pin(133) : (null)
[   12.557472@3]  reg:2620,clearmask=100010,setmask=0
[   12.557476@3] reg:2622,clearmask=ff,set pin=133
[   12.557479@3] reg:2623,clearmask=70000,setmask=4
[   12.557482@3] interrupt_pin(133) : sdio_wifi
[   12.557486@3] power_on_pin(6) : (null)
[   12.557492@3] power_on_pin(6) : sdio_wifi
[   12.557494@3] power_on_pin2(123) : (null)
[   12.557500@3] power_on_pin2(123) : sdio_wifi
[   12.658442@1] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-lm1-1.2/input2
[   12.771161@3] cur_mode = 0
[   12.771170@3] [0x0] = 0x1dd0190
[   12.771174@3] [0x4] = 0xf800ca
[   12.771176@3] [0x8] = 0x82006e
[   12.771179@3] [0xc] = 0x3c0030
[   12.771182@3] [0x10] = 0x30fa0013
[   12.771184@3] [0x18] = 0x6f19000
[   12.771187@3] [0x1c] = 0x9f40
[   12.771190@3] [0x20] = 0x0
[   12.771192@3] [0x24] = 0x0
[   12.771195@3] [0x28] = 0x0
[   12.771198@3] set_remote_mode[69]
[   12.956855@3] WIFI  Disable! 6
[   12.586311@3] amlvideo openamlvideo close
[   13.086160@3] amlvideo open<4>[   13.478903@3] eth0: device MAC address 00:01:23:cd:ee:af
[   13.495522@3] mask interrupts MMC
[   13.495532@3] mask interrupts MMC
[   13.495542@3] mask interrupts MMC
[   13.522967@0] 8021q: 802.1Q VLAN Support v1.8
[   14.970104@1] Triggered SDIO WiFi power on and bus rescan.
[   14.970116@1] WIFI  Enable! 6
[   15.283120@2] sdio: mmc_rescan_try_freq: trying to init card at 400000 Hz
[   13.086457@2] amlvideo close
[   16.276995@2] [aml_sdio_timeout] time_start_cnt:993
[   16.276995@2] <6>[   17.077643@3] libphy: stmmac-0:01 - Link is Up - 1000/Full
[   17.077866@3] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   16.277225@3] [aml_sdio_print_err] sdio: Timeout error, Cmd52 arg 0xc00, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x113, virqc=0x3f003f00, conf->cmd_clk_divide=177, pdata->clkc=177, conf->bus_width=0, pdata->width=0, conf=0x416270b1, clock=397940
[   16.277225@3]
[   17.276905@3] [aml_sdio_timeout] time_start_cnt:999
[   17.276905@3] [aml_sdio_print_err] sdio: Timeout error, Cmd52 arg 0x80000c08, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x3f001f00, conf->cmd_clk_divide=177, pdata->clkc=177, conf->bus_width=0, pdata->width=0, conf=0x416270b1, clock=397940
[   17.277015@0]
[   18.277034@0] [aml_sdio_timeout] time_start_cnt:996
[   18.277034@0] <4>[   18.291930@1] sdio: queuing unknown CIS tuple 0x80 (2 bytes)
[   18.294153@1] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
[   18.296319@1] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
[   18.300310@1] sdio: queuing unknown CIS tuple 0x80 (7 bytes)
[   18.385540@1] sdio: new high speed SDIO card at address 0001, clock 35416666, 4-bit-bus-width
[   18.277265@0] [aml_sdio_print_err] sdio: Timeout error, Cmd8 arg 0x1aa, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x1f003f00, conf->cmd_clk_divide=177, pdata->clkc=177, conf->bus_width=0, pdata->width=0, conf=0x416270b1, clock=397940
[   18.277265@0]
[   18.512532@0] cfg80211: Calling CRDA to update world regulatory domain
[   18.512602@0] cfg80211: World regulatory domain updated:
[   18.512607@0] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   18.512612@0] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (2000 mBi, 0 mBm)
[   18.512616@0] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (2000 mBi, 0 mBm)
[   18.512620@0] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (2000 mBi, 0 mBm)
[   18.512623@0] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (2000 mBi, 0 mBm)
[   18.512627@0] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (2000 mBi, 0 mBm)
[   18.512631@0] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (2000 mBi, 0 mBm)
[   18.512635@0] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (2000 mBi, 0 mBm)
[   18.512638@0] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[   18.525480@3] [sdio_reinit] finish
[   18.631301@1] dhd_module_init: in
[   18.631322@1] wifi_setup_dt
[   18.631335@1] wifi_request_32k_clk : ON-->ON for sdio_wifi
[   18.631346@1] interrupt_pin(133) : sdio_wifi
[   18.631359@1] sdio_wifi is using the pin GPIOX_21
[   18.631370@1] wifi_dt : gpio op failed(-16) at line 253
[   18.631390@1]  reg:2620,clearmask=100010,setmask=0
[   18.631409@1] reg:2622,clearmask=ff,set pin=133
[   18.631425@1] reg:2623,clearmask=70000,setmask=4
[   18.631437@1] interrupt_pin(133) : sdio_wifi
[   18.631456@1] power_on_pin(6) : sdio_wifi
[   18.631471@1] sdio_wifi is using the pin GPIOAO_6
[   18.631482@1] wifi_dt : gpio op failed(-16) at line 275
[   18.631495@1] power_on_pin(6) : sdio_wifi
[   18.631515@1] power_on_pin2(123) : sdio_wifi
[   18.631530@1] sdio_wifi is using the pin GPIOX_11
[   18.631541@1] wifi_dt : gpio op failed(-16) at line 287
[   18.631554@1] power_on_pin2(123) : sdio_wifi
[   18.631564@1] sdio_wifi is using the pin GPIOX_20
[   18.631573@1] wifi_dt : gpio op failed(-16) at line 317
[   18.716923@1] ======== bcm_wlan_set_plat_data ========
[   18.717000@1] host_oob_irq: 100
[   18.717013@1] host_oob_irq_flags=1044
[   18.717025@1] dhd_wifi_platform_load: Enter
[   18.717061@1] Power-up adapter 'DHD generic adapter'
[   18.717077@1] wifi_platform_set_power = 1
[   18.717091@1] ======== PULL WL_REG_ON HIGH! ========
[   18.717113@1] WIFI  Disable! 6
[   18.917625@1] WIFI  Enable! 6
[   19.426844@1] wifi_platform_bus_enumerate device present 1
[   19.426851@1] ======== Card detection to detect SDIO card! ========
[   19.427011@1] sdio_reset_comm():
[   19.441752@3] sdio: queuing unknown CIS tuple 0x80 (2 bytes)
[   19.443623@3] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
[   19.445500@3] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
[   19.448882@0] sdio: queuing unknown CIS tuple 0x80 (7 bytes)
[   19.500502@3] [sdio_reinit] finish
[   19.547875@1] bcmsdh_register: register client driver
[   19.548602@3] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[   19.549226@3] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[   19.549287@3] bus num (host idx)=1, slot num (rca)=1
[   19.549364@3] found adapter info 'DHD generic adapter'
[   19.549465@3] 7 bcmdhd_mem_prealloc: wlan_mem_array[section].mem_ptr=c0912554, size=139264
[   19.549511@3] success alloc section 3, size 139264
[   19.550370@3] alloc static buf at ee8c0000!
[   19.550462@3] 1 bcmdhd_mem_prealloc: section=4, wlan_static_skb=c0b46370
[   19.550508@3] success alloc section 4, size 0
[   19.553288@3] dhdsdio_probe : no mutex held. set lock
[   19.554287@3] F1 signature read @0x18000000=0x16044330
[   19.577408@0] F1 signature OK, socitype:0x1 chip:0x4330 rev:0x4 pkg:0x0
[   19.582175@1] DHD: dongle ram size is set to 294912(orig 294912) at 0x0
[   19.584182@1] 4 bcmdhd_mem_prealloc: section=7, wlan_mem_array[4]=ee7c8000
[   19.584251@1] success alloc section 7, size 19744
[   19.584427@1] dhd_conf_set_chiprev: chip=0x4330, chiprev=4
[   19.584860@1] dhd_conf_set_conf_path_by_nv_path: config_path=/lib/firmware/broadcom/config.txt
[   19.587164@1] dhd_conf_read_config: Ignore config file /lib/firmware/broadcom/config.txt
[   19.587469@1] 7 bcmdhd_mem_prealloc: wlan_mem_array[section].mem_ptr=c091253c, size=10416
[   19.587519@1] success alloc section 0, size 10416
[   19.593412@1] 2 bcmdhd_mem_prealloc: section=5, wlan_static_scan_buf0=ee7d0000
[   19.593517@1] success alloc section 5, size 65536
[   19.594427@1] wl_create_event_handler(): thread:wl_event_handler:8d6 started
[   19.595228@1] tsk Enter, tsk = 0xed34f69c
[   19.600560@1] dhd_attach(): thread:dhd_watchdog_thread:8d8 started
[   19.601620@1] dhd_attach(): thread:dhd_dpc:8d9 started
[   19.601787@1] dhd_dpc_thread: set dpc_cpucore 0 from config.txt
[   19.602067@2] dhd_attach(): thread:dhd_rxf:8da started
[   19.602165@2] dhd_deferred_work_init: work queue initialized
[   19.602258@2] 7 bcmdhd_mem_prealloc: wlan_mem_array[section].mem_ptr=c0912544, size=10396
[   19.602307@2] success alloc section 1, size 10396
[   19.602388@2] 7 bcmdhd_mem_prealloc: wlan_mem_array[section].mem_ptr=c091254c, size=65536
[   19.602430@2] success alloc section 2, size 65536
[   19.603381@1] dhdsdio_probe_init: set use_rxchain 0 from config.txt
[   19.633468@1] Dongle Host Driver, version 1.201.59.5 (r506368)
[   19.633468@1] Compiled in drivers/net/wireless/bcmdhd
[   19.634754@1] Register interface [wlan0]  MAC: e0:76:d0:28:f8:37
[   19.634754@1]
[   19.634767@1] dhd_prot_ioctl : bus is down. we have nothing to do
[   19.634770@3] dhd_open: Enter ed311800
[   19.634773@3] dhd_open : dhd_open: call dev open before insmod complete!
[   19.635328@1] bcmsdh_oob_intr_unregister: Enter
[   19.635336@1] bcmsdh_oob_intr_unregister: irq is not registered
[   19.635347@1] dhd_txglom_enable: enable 0
[   19.635351@1] dhd_bus_devreset:  WLAN OFF DONE
[   19.635395@1] wifi_platform_set_power = 0
[   19.635399@1] ======== PULL WL_REG_ON LOW! ========
[   19.635405@1] dhdsdio_probe : the lock is released.
[   19.635414@3]
[   19.635414@3] Dongle Host Driver, version 1.201.59.5 (r506368)
[   19.635414@3] Compiled in drivers/net/wireless/bcmdhd
[   19.635422@3] wl_android_wifi_on in 1
[   19.635432@3] wl_android_wifi_on in 2: g_wifi_on=0
[   19.635436@3] wifi_platform_set_power = 1
[   19.635439@3] ======== PULL WL_REG_ON HIGH! ========
[   19.635446@3] WIFI  Disable! 6
[   19.635526@1] dhd_module_init: Exit err=0
[   19.816857@0] Changing uart_a_ttyS1: baud from 0 to 115200
[   19.835484@3] WIFI  Enable! 6
[   20.160340@0] IEC958 16bit
[   20.160349@0] hdmitx: audio: aout notify rate 48000
[   20.160354@0] hdmitx: audio: aout notify size 16
[   20.160357@0] hdmitx: audio: no update
[   20.160361@0] aml_i2s_close device type 8
[   20.174704@0] IEC958 16bit
[   20.174713@0] hdmitx: audio: aout notify rate 48000
[   20.174716@0] hdmitx: audio: aout notify size 16
[   20.174719@0] hdmitx: audio: no update
[   20.174724@0] aml_i2s_close device type 8
[   20.175917@0] IEC958 16bit
[   20.175923@0] hdmitx: audio: aout notify rate 48000
[   20.175926@0] hdmitx: audio: aout notify size 16
[   20.175929@0] hdmitx: audio: no update
[   20.175934@0] aml_i2s_close device type 8
[   20.177874@0] IEC958 16bit
[   20.177880@0] hdmitx: audio: aout notify rate 48000
[   20.177884@0] hdmitx: audio: aout notify size 16
[   20.177886@0] hdmitx: audio: no update
[   20.177891@0] aml_i2s_close device type 8
[   20.178743@0] IEC958 16bit
[   20.178749@0] hdmitx: audio: aout notify rate 48000
[   20.178753@0] hdmitx: audio: aout notify size 16
[   20.178756@0] hdmitx: audio: no update
[   20.178760@0] aml_i2s_close device type 8
[   20.179869@0] IEC958 16bit
[   20.179875@0] hdmitx: audio: aout notify rate 48000
[   20.179878@0] hdmitx: audio: aout notify size 16
[   20.179881@0] hdmitx: audio: no update
[   20.179885@0] aml_i2s_close device type 8
[   20.180984@0] IEC958 16bit
[   20.180990@0] hdmitx: audio: aout notify rate 48000
[   20.180993@0] hdmitx: audio: aout notify size 16
[   20.180996@0] hdmitx: audio: no update
[   20.181000@0] aml_i2s_close device type 8
[   20.181534@0] IEC958 16bit
[   20.181540@0] hdmitx: audio: aout notify rate 48000
[   20.181543@0] hdmitx: audio: aout notify size 16
[   20.181546@0] hdmitx: audio: no update
[   20.181550@0] aml_i2s_close device type 8
[   20.182721@0] IEC958 16bit
[   20.182727@0] hdmitx: audio: aout notify rate 48000
[   20.182730@0] hdmitx: audio: aout notify size 16
[   20.182733@0] hdmitx: audio: no update
[   20.182737@0] aml_i2s_close device type 8
[   20.183817@0] IEC958 16bit
[   20.183823@0] hdmitx: audio: aout notify rate 48000
[   20.183826@0] hdmitx: audio: aout notify size 16
[   20.183829@0] hdmitx: audio: no update
[   20.183833@0] aml_i2s_close device type 8
[   20.184358@0] IEC958 16bit
[   20.184363@0] hdmitx: audio: aout notify rate 48000
[   20.184367@0] hdmitx: audio: aout notify size 16
[   20.184369@0] hdmitx: audio: no update
[   20.184373@0] aml_i2s_close device type 8
[   20.185442@0] IEC958 16bit
[   20.185448@0] hdmitx: audio: aout notify rate 48000
[   20.185451@0] hdmitx: audio: aout notify size 16
[   20.185454@0] hdmitx: audio: no update
[   20.185458@0] aml_i2s_close device type 8
[   20.186525@0] IEC958 16bit
[   20.186530@0] hdmitx: audio: aout notify rate 48000
[   20.186534@0] hdmitx: audio: aout notify size 16
[   20.186537@0] hdmitx: audio: no update
[   20.186541@0] aml_i2s_close device type 8
[   20.187213@0] IEC958 16bit
[   20.187219@0] hdmitx: audio: aout notify rate 48000
[   20.187223@0] hdmitx: audio: aout notify size 16
[   20.187225@0] hdmitx: audio: no update
[   20.187231@0] aml_i2s_close device type 8
[   20.188073@0] IEC958 16bit
[   20.188080@0] hdmitx: audio: aout notify rate 48000
[   20.188083@0] hdmitx: audio: aout notify size 16
[   20.188086@0] hdmitx: audio: no update
[   20.188090@0] aml_i2s_close device type 2
[   20.192382@1] buf=0
[   20.192389@1] IEC958_mode_raw=0
[   20.192416@1] IEC958_mode_codec= 0,IEC958 type 2 CH PCM
[   20.192419@1] last mode 0,now 0
[   20.196111@2] IEC958 16bit
[   20.196119@2] hdmitx: audio: aout notify rate 48000
[   20.196123@2] hdmitx: audio: aout notify size 16
[   20.196126@2] hdmitx: audio: no update
[   20.196130@2] aml_i2s_close device type 8
[   20.197397@2] IEC958 16bit
[   20.197405@2] hdmitx: audio: aout notify rate 48000
[   20.197408@2] hdmitx: audio: aout notify size 16
[   20.197411@2] hdmitx: audio: no update
[   20.197415@2] aml_i2s_close device type 8
[   20.199179@2] enter aml_asoc_hw_params stream: playback rate: 44100 format: 2
[   20.199394@2] [aml-i2s-dai]enterd aml_dai_i2s_prepare,old_samplerate:48000,sample_rate=44100
[   20.199406@2] [aml-i2s-dai]i2s dma f0701000,phy addr 2e300000,mode 0,ch 2
[   20.199409@2] ----aml_hw_iec958_init,runtime->rate=44100--
[   20.199414@2] [aml-spdif-dai]enterd aml_hw_iec958_init,set_clock:4,sample_rate=5
[   20.199417@2] audio_set_958_clk, freq=5,
[   20.199421@2] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
[   20.199425@2] iec958 mode PCM16
[   20.199430@2] IEC958 16bit
[   20.199433@2] hdmitx: audio: aout notify rate 44100
[   20.199436@2] hdmitx: audio: aout notify size 16
[   20.199441@2] hdmitx: audio: audio channel num is 1
[   20.199447@2] hdmitx: audio: SPDIF
[   20.199458@2] hdmitx: audio: current VIC: 4
[   20.199460@2] hdmitx: audio: audio sample rate: 2
[   20.199463@2] hdmitx: audio: set audio N para
[   20.199470@2] hdmitx: audio: PCM out to HDMI
[   20.199473@2] hdmitx: audio: i2s_to_spdif_flag:1
[   20.199476@2] hdmitx: audio: Enable audio spdif to HDMI
[   20.199481@2] hdmitx: audio: Audio Type: PCM
[   20.199522@2] hdmitx: audio: set audio param
[   20.199526@2] [aml-spdif-dai]spdif dma f0701000,phy addr 2e300000
[   20.199575@2] speaker_events--mute =1
[   20.206973@3] [aml-i2s-dai]i2s dma f0701000,phy addr 2e300000,mode 0,ch 2
[   20.206978@3] ----aml_hw_iec958_init,runtime->rate=44100--
[   20.206982@3] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
[   20.206986@3] iec958 mode PCM16
[   20.206993@3] IEC958 16bit
[   20.206997@3] hdmitx: audio: aout notify rate 44100
[   20.207000@3] hdmitx: audio: aout notify size 16
[   20.207002@3] hdmitx: audio: no update
[   20.207006@3] [aml-spdif-dai]spdif dma f0701000,phy addr 2e300000
[   20.209254@3] [aml-i2s-dai]aiu i2s playback enable
[   20.209254@3]
[   20.209262@3] [aml-i2s-dai]audio_hw_958_enable  1
[   20.336848@1] sdio_reset_comm():
[   20.350687@0] sdio: queuing unknown CIS tuple 0x80 (2 bytes)
[   20.352424@0] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
[   20.406059@1]
[   20.406059@1]
[   20.406059@1] dhd_bus_devreset: == WLAN ON ==
[   20.406146@1] F1 signature read @0x18000000=0x16044330
[   20.408060@0] F1 signature OK, socitype:0x1 chip:0x4330 rev:0x4 pkg:0x0
[   20.408439@0] DHD: dongle ram size is set to 294912(orig 294912) at 0x0
[   20.408684@0] dhdsdio_probe_init: set use_rxchain 0 from config.txt
[   20.408755@0] dhd_conf_read_config: Ignore config file /lib/firmware/broadcom/config.txt
[   20.408762@0] dhd_conf_set_fw_name_by_chip: firmware_path=/lib/firmware/broadcom/fw_bcm40183b2.bin
[   20.408766@0] Final fw_path=/lib/firmware/broadcom/fw_bcm40183b2.bin
[   20.408769@0] Final nv_path=/lib/firmware/broadcom/ap6330_nvram.txt
[   20.408771@0] Final conf_path=/lib/firmware/broadcom/config.txt
[   19.250935@3] amlvideo openamlvideo close
[   21.737002@3] NVRAM version: AP6330_NVRAM_V1.0_20121130
[   21.759295@3] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
[   22.050654@3] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
[   22.050744@3] bcmsdh_oob_intr_register: Enter
[   22.050749@3] bcmsdh_oob_intr_register: HW_OOB enabled
[   22.050752@3] bcmsdh_oob_intr_register OOB irq=100 flags=414
[   22.050779@3] bcmsdh_oob_intr_register: enable_irq_wake
[   22.050783@3] bcmsdh_oob_intr_register: enable_irq_wake failed with -6
[   22.051645@3] dhd_conf_set_band: Set band 0
[   22.051794@3] dhd_preinit_ioctls: Set tcpack_sup_mode 0
[   22.053398@3] Firmware up: op_mode=0x0005, MAC=e0:76:d0:28:f8:37
[   22.053403@3] dhd_conf_set_country: Set country ALL, revision 0
[   22.126709@3] Country code: ALL (ALL/0)
[   22.127028@2] dhd_conf_set_roam: Set roam_off 1
[   22.128946@3] dhd_preinit_ioctls buf_key_b4_m4 set failed -23
[   22.134787@3] Firmware version = wl0: Jan  6 2014 15:11:29 version 5.90.195.89.13 FWID 01-72f124c5
[   22.134796@3]   Driver: 1.201.59.5 (r506368)
[   22.134796@3]   Firmware: wl0: Jan  6 2014 15:11:29 version 5.90.195.89.13 FWID 01-72f124c5
[   22.135024@3] dhd_txglom_enable: enable 0
[   22.135028@3] dhd_conf_set_disable_proptx: set disable_proptx 1
[   22.140551@3] dhd_preinit_ioctls wl ampdu_hostreorder failed -23
[   22.140924@3] wl_android_wifi_on: Success
[   22.245792@3] dhd_set_scb_probe: GET max_scb_probe failed
[   22.246162@3] dhd_set_scb_probe: max_scb_probe setting failed
[   22.246168@3] dhd_open: Exit ret=0
[   23.518170@0] hdmitx: cec: enable:int mask:0x6
[   23.519039@0] hdmitx: cec: enable:int mask:0x6
[   26.156855@1] Changing uart_a_ttyS1: baud from 115200 to 2000000
[   26.185766@2] Bluetooth: Core ver 2.16
[   26.185868@2] NET: Registered protocol family 31
[   26.185875@2] Bluetooth: HCI device and connection manager initialized
[   26.185898@2] Bluetooth: HCI socket layer initialized
[   26.185906@2] Bluetooth: L2CAP socket layer initialized
[   26.185920@2] Bluetooth: SCO socket layer initialized
[   26.190881@2] Bluetooth: HCI UART driver ver 2.2
[   26.190891@2] Bluetooth: HCI H4 protocol initialized
[   26.190895@2] Bluetooth: HCI Realtek H5 protocol initialized
[   26.190898@2] rtk_btcoex: rtk_uart_coex_init, version: 1.1
[   26.190901@2] rtk_btcoex: create workqueue
[   26.191399@0] Bluetooth: hci_uart_register_dev
[   26.192383@0] rtk_btcoex: create udpsocket, connect_port: 30001
[   26.192409@0] rtk_btcoex: send msg INVITE_REQ with len:11
[   26.199963@0] rtk_btcoex: uart_coex_info.hci_reversion = 1000
[   26.199973@0] rtk_btcoex: uart_coex_info.lmp_subversion = 4103
[   26.268998@0] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   26.269007@0] Bluetooth: BNEP filters: protocol multicast
[   26.269028@0] Bluetooth: BNEP socket layer initialized
[   30.020301@0] Wrong custom code is 0xd7287f80
[   30.488625@0] Wrong custom code is 0xd7287f80
[   30.735008@0] Wrong custom code is 0xd7287f80
[   31.004048@0] Wrong custom code is 0xd7287f80
[   31.628880@0] Wrong custom code is 0xd7287f80
[   32.036428@0] Wrong custom code is 0xd7287f80
[   32.736204@0] Wrong custom code is 0xd9267f80
[   32.982498@0] Wrong custom code is 0xd9267f80
[   33.168164@0] Wrong custom code is 0xd9267f80
[   33.625761@0] Wrong custom code is 0xd7287f80
[   40.381404@3] input: Logitech Unifying Device. Wireless PID:4024 as /devices/lm1/usb1/1-1/1-1.2/1-1.2:1.2/0003:046D:C52B.0003/input/input3
[   40.384943@3] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4024] on usb-lm1-1.2:1
