LibreELEC:~ # dmesg [ 0.000000@0] Booting Linux on physical CPU 0x200 [ 0.000000@0] Linux version 3.10.108 (dtech@LibreBuilder) (gcc version 8.3.0 (GCC) ) #1 SMP PREEMPT Sun Sep 12 15:33:42 CEST 2021 [ 0.000000@0] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d [ 0.000000@0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000@0] Machine: Amlogic Meson8, model: AMLOGIC [ 0.000000@0] physical memory start address is 0x200000 [ 0.000000@0] reserved_end is 1cafffff [ 0.000000@0] [ 0.000000@0] Total memory is 2046 MiB [ 0.000000@0] Reserved low memory from 0x06000000 to 0x1cafffff, size: 363 MiB [ 0.000000@0] mesonfb0(low) : 0x06100000 - 0x07900000 ( 24 MiB) [ 0.000000@0] mesonfb1(low) : 0x07900000 - 0x07a00000 ( 1 MiB) [ 0.000000@0] deinterlace0(high) : 0x7df00000 - 0x80000000 ( 33 MiB) [ 0.000000@0] mesonstream0(low) : 0x07a00000 - 0x09a00000 ( 32 MiB) [ 0.000000@0] vdec0(low) : 0x09a00000 - 0x19a00000 (256 MiB) [ 0.000000@0] ppmgr0(high) : 0x7bf00000 - 0x7df00000 ( 32 MiB) [ 0.000000@0] vdin00(low) : 0x19a00000 - 0x19b00000 ( 1 MiB) [ 0.000000@0] vdin10(low) : 0x19b00000 - 0x1ab00000 ( 16 MiB) [ 0.000000@0] amlvideo20(low) : 0x1ab00000 - 0x1c300000 ( 24 MiB) [ 0.000000@0] amvideocap0(low) : 0x1c300000 - 0x1cb00000 ( 8 MiB) [ 0.000000@0] get storage device: storage 2 [ 0.000000@0] value=2 [ 0.000000@0] get_storage_device : get storage device: storage 2 [ 0.000000@0] get_storage_device : value=2 [ 0.000000@0] [get_storage_device] storage_flag=2 [ 0.000000@0] Memory policy: ECC disabled, Data cache writealloc [ 0.000000@0] On node 0 totalpages: 410624 [ 0.000000@0] free_area_init_node: node 0, pgdat c091d080, node_mem_map c0b55000 [ 0.000000@0] Normal zone: 1520 pages used for memmap [ 0.000000@0] Normal zone: 0 pages reserved [ 0.000000@0] Normal zone: 98048 pages, LIFO batch:31 [ 0.000000@0] HighMem zone: 2442 pages used for memmap [ 0.000000@0] HighMem zone: 312576 pages, LIFO batch:31 [ 0.000000@0] Meson chip version = RevC (19:C - 0:27ED) [ 0.000000@0] PERCPU: Embedded 7 pages/cpu @c1ae4000 s7488 r8192 d12992 u32768 [ 0.000000@0] pcpu-alloc: s7488 r8192 d12992 u32768 alloc=8*4096 [ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 409104 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200n8 no_console_suspend storage=2 cvbsdrv=0 vdaccfg=0xa000 logo=osd1,loaded,0x15100000,1080p,full hdmimode=720p cvbsmode=576cvbs androidboot.firstboot=1 hdmitx=cec0 bootfromsd console=ttyS0,115200n8 no_console_suspend console=tty0 consoleblank=0 systemd.show_status=auto [ 0.000000@0] cvbs performance line = 0 [ 0.000000@0] cvbs trimming line = 0xa000 [ 0.000000@0] cvbs trimming.1.v5: 0xa0, 0x0 [ 0.000000@0] osd1:1 [ 0.000000@0] loaded:268435459 [ 0.000000@0] logo has been loaded [ 0.000000@0] 1080p:15 [ 0.000000@0] full:2 [ 0.000000@0] kernel get hdmimode form uboot is 720p [ 0.000000@0] kernel get cvbsmode form uboot is 576cvbs [ 0.000000@0] hdmitx: cec: Function List: disable, , , [ 0.000000@0] hdmitx: cec: HDMI aml_read_reg32(P_AO_DEBUG_REG0):0x0 [ 0.000000@0] hdmitx: cec: HDMI hdmi_cec_func_config:0x0 [ 0.000000@0] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000@0] Memory: 64MB 16MB 1524MB = 1604MB total [ 0.000000@0] Memory: 1610624k/1610624k available, 31872k reserved, 1250304K highmem [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000@0] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000@0] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000@0] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000@0] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000@0] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000@0] .text : 0xc0008000 - 0xc08922f8 (8745 kB) [ 0.000000@0] .init : 0xc0893000 - 0xc08c3d40 ( 196 kB) [ 0.000000@0] .data : 0xc08c4000 - 0xc091df18 ( 360 kB) [ 0.000000@0] .bss : 0xc091df18 - 0xc0b50d1c (2252 kB) [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] RCU debugfs-based tracing is enabled. [ 0.000000@0] NR_IRQS:256 [ 0.000000@0] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms [ 0.000000@0] Global timer: MESON TIMER-F (c08df2c0) initialized [ 0.000000@0] Switching to timer-based delay loop [ 0.000000@0] Console: colour dummy device 80x30 [ 0.000000@0] console [tty0] enabled [ 0.000000@0] meson_serial_console_setup [ 0.000000@0] console [ttyS0] enabled [ 0.385333@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000) [ 0.395625@0] pid_max: default: 32768 minimum: 301 [ 0.400557@0] Mount-cache hash table entries: 512 [ 0.408713@0] CPU: Testing write buffer coherency: ok [ 0.410458@0] CPU0: thread -1, cpu 0, socket 2, mpidr 80000200 [ 0.415977@0] Setting up static identity map for 0xc062cfa8 - 0xc062d000 [ 0.422733@0] L310 cache controller enabled [ 0.426743@0] l2x0: 8 ways, 4096 sets, CACHE_ID 0x4100a0c9, Cache size: 1048576 B [ 0.434316@0] AUX_CTRL 0x7ec80001, PERFETCH_CTRL 0x71000007, POWER_CTRL 0x00000000 [ 0.442435@0] TAG_LATENCY 0x00000111, DATA_LATENCY 0x00000222 [ 0.500138@0] write pen_release: 1 [ 0.500517@1] CPU1: Booted secondary processor [ 0.500534@1] CPU1: thread -1, cpu 1, socket 2, mpidr 80000201 [ 0.520118@0] write pen_release: 2 [ 0.528431@2] CPU2: Booted secondary processor [ 0.528440@2] CPU2: thread -1, cpu 2, socket 2, mpidr 80000202 [ 0.540115@0] write pen_release: 3 [ 0.548426@3] CPU3: Booted secondary processor [ 0.548436@3] CPU3: thread -1, cpu 3, socket 2, mpidr 80000203 [ 0.548493@0] Brought up 4 CPUs [ 0.561470@0] SMP: Total of 4 processors activated (8.00 BogoMIPS). [ 0.567702@0] CPU: All CPU(s) started in SVC mode. [ 0.572892@0] devtmpfs: initialized [ 0.580335@0] clkrate [ xtal ] : 24000000 [ 0.580370@0] clkrate [ pll_sys ] : 1200000000 [ 0.584519@0] clkrate [ pll_fixed ] : 2550000000 [ 0.589200@0] clkrate [ pll_vid ] : 732000000 [ 0.593626@0] TODO: clk_get_rate_hpll() is not implement in M8 now [ 0.599774@0] clkrate [ pll_hpll ] : 0 [ 0.603593@0] clkrate [ pll_ddr ] : 0 [ 0.607317@0] clkrate [ a9_clk ] : 1200000000 [ 0.611742@0] clkrate [ clk81 ] : 141666666 [ 0.616579@1] pinctrl core: initialized pinctrl subsystem [ 0.621675@1] regulator-dummy: no parameters [ 0.625785@1] NET: Registered protocol family 16 [ 0.636371@1] DMA: preallocated 4096 KiB pool for atomic coherent allocations [ 0.639408@1] VPU driver version: v03 [ 0.641533@1] vpu driver detect cpu type: m8 [ 0.645771@1] load vpu_clk in dts: 364300000Hz(7) [ 0.650504@1] vpu_probe OK [ 0.657023@1] amlogic_gpio gpio: Probed amlogic GPIO driver [ 0.659123@1] register lm device lm-root [ 0.662664@1] register lm device lm1 [ 0.666204@1] register lm device lm0 [ 0.669907@1] Init pinux probe! [ 0.673252@1] pinmux-m8 pinmux: Probed amlogic pinctrl driver [ 0.678704@1] -------early_init_dt_init:115---------- [ 0.683569@1] tv_init_module [ 0.686428@1] major number 254 for disp [ 0.690237@1] vout_register_server [ 0.693622@1] register tv module server ok [ 0.697778@1] aml_i2c version: 20140813 [ 0.701553@1] plat->state_name:default [ 0.701565@1] master_no = 0, master_regs=fe600500 [ 0.701689@1] aml-i2c i2c-AO: add adapter aml_i2c_adap0(ef3658a8) [ 0.707575@1] aml-i2c i2c-AO: aml i2c bus driver. [ 0.712396@1] aml_pmu_init, 458 [ 0.715430@1] call aml_dvfs_init in [ 0.718886@1] [DVFS]aml_dvfs_probe, child name:vcck_dvfs [ 0.718893@1] [DVFS]dvfs table of vcck_dvfs is: [ 0.718898@1] [DVFS] freq, min_uV, max_uV [ 0.718903@1] [DVFS] 96000, 825000, 825000 [ 0.718907@1] [DVFS] 192000, 825000, 825000 [ 0.718911@1] [DVFS] 312000, 825000, 825000 [ 0.718915@1] [DVFS] 408000, 825000, 825000 [ 0.718919@1] [DVFS] 504000, 825000, 825000 [ 0.718923@1] [DVFS] 600000, 850000, 850000 [ 0.718927@1] [DVFS] 720000, 850000, 850000 [ 0.718931@1] [DVFS] 816000, 875000, 875000 [ 0.718935@1] [DVFS] 1008000, 925000, 925000 [ 0.718939@1] [DVFS] 1200000, 975000, 975000 [ 0.718944@1] [DVFS] 1416000, 1025000, 1025000 [ 0.718948@1] [DVFS] 1608000, 1100000, 1100000 [ 0.718952@1] [DVFS] 1800000, 1125000, 1125000 [ 0.718956@1] [DVFS] 1992000, 1150000, 1150000 [ 0.719085@1] hdmitx: system: amhdmitx_init [ 0.723008@1] hdmitx: system: Ver: 2014May6 [ 0.727218@1] hdmitx: system: amhdmitx_probe [ 0.731599@1] hdmitx: system: not find ao cec [ 0.735744@1] hdmitx: system: not find vend_init_data [ 0.740919@1] hdmitx: system: gate/pwr cmd: 7 [ 0.745108@1] hdmitx: system: ALREADY init VIC = 16 [ 0.749961@1] hdmitx: system: gate/pwr cmd: 0 [ 0.754681@0] hdmitx: system: reset intr mask [ 0.770034@0] hdmitx: system: irq 1 [ 0.793722@2] bio: create slab at 0 [ 0.794459@2] SCSI subsystem initialized [ 0.796501@2] usbcore: registered new interface driver usbfs [ 0.801923@2] usbcore: registered new interface driver hub [ 0.807363@2] usbcore: registered new device driver usb [ 0.812785@2] pps_core: LinuxPPS API ver. 1 registered [ 0.817593@2] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.826936@2] PTP clock support registered [ 0.831411@2] mode is 11,sync_duration_den=1,sync_duration_num=60 [ 0.837014@2] TV mode 720p selected. [ 0.840576@2] tvoutc_setmode[505] [ 0.843860@2] tvoutc_setmode[516] mode is 11 [ 0.848107@2] vinfo mode is: 720p [ 0.851413@2] aml_logo: outputmode changed(15->11), reset osd1 scaler. [ 0.888786@2] hdmitx: system: gate/pwr cmd: 4 [ 1.098701@2] hdmitx: system: gate/pwr cmd: 5 [ 1.098734@2] hdmitx: edid: edid ready [ 1.101148@2] hdmitx: system: gate/pwr cmd: 4 [ 1.318701@2] hdmitx: system: gate/pwr cmd: 5 [ 1.318732@2] hdmitx: edid: edid ready [ 1.321150@2] hdmitx: edid: check sum valid [ 1.325308@2] hdmitx: edid: check sum valid [ 1.329474@2] hdmitx: edid: blk0 raw data [ 1.333457@2] 00ffffffffffff001e6d345b010101012319010380301b78ea3135a5554ea126 [ 1.340650@2] 0c5054a54b00714f81809500b300a9c0810081c090402a4480a0703827403020 [ 1.347845@2] 3500e00e1100001e000000fd00284b1e5512000a202020202020000000fc004d [ 1.355039@2] 503539470a20202020202020023a801871382d40582c4500e00e1100001e015b [ 1.362234@2] [ 1.363882@2] hdmitx: edid: blk1 raw data [ 1.367868@2] 020324f148900403011012131f230907078301000065030c001120681a000001 [ 1.375063@2] 01284b00023a801871382d40582c4500e00e1100001e00000000000000000000 [ 1.382258@2] 0000000000000000011d007251d01e206e285500e00e1100001e8c0ad08a20e0 [ 1.389452@2] 2d10103e9600e00e110000180000000000000000000000000000000000000069 [ 1.396647@2] [ 1.398499@2] hdmitx: edid: find IEEEOUT [ 1.402221@2] hdmitx: video: get current mode: 720p [ 1.407056@2] is_similar_hdmi_vic[326] vic_old=16,mode_new=11 [ 1.412782@2] hdmitx: system: gate/pwr cmd: 7 [ 1.417150@2] hdmitx: system: already init VIC = 0 Now VIC = 4 [ 1.423008@2] hdmitx: system: 4 (cd0,cs0,pm1,vd0,1) [ 1.428027@2] hdmitx: system: gate/pwr cmd: 0 [ 1.432371@2] hdmitx: system: hw reset [ 1.437132@2] hdmitx: audio: SPDIF [ 1.439529@2] hdmitx: system: reconfig packet setting done [ 1.464920@2] hdmitx: system: set pll [ 1.464947@2] hdmitx: system: param->VIC:4 [ 1.467020@2] mode is: 11 [ 1.469627@2] VPU_VIU_VENC_MUX_CTRL: 0xa [ 1.473520@2] viu chan = 1 [ 1.476207@2] VPU_VIU_VENC_MUX_CTRL: 0xa [ 1.480112@2] config HPLL [ 1.482709@2] set_hpll_clk_out[81] clk = 2970 [ 1.497861@0] call aml_pmu_probe_init in [ 1.497960@0] aml_pmus_probe, child name:rn5t618 [ 1.500765@0] aml_pmus_probe, i2c_bus:i2c_bus_ao [ 1.505667@0] board_has_battery:false [ 1.508461@3] config HPLL done [ 1.508472@3] enc_vpu_bridge_reset[292] [ 1.515846@0] [DVFS]aml_dvfs_register_driver, driver rn5t618-dvfs regist success, mask:7, source id:1 [ 1.515853@0] [RN5T618]ricoh_pmu_probe, 287 [ 1.516647@0] [RN5T618]coulomb_flag:0x20 [ 1.516651@0] [RN5T618]no saved coulomb counter [ 1.516754@0] ricoh_pmu_probe, 302 [ 1.516762@0] Allocate new i2c device: adapter:0, addr:0x32, node name:rn5t618, type:ricoh_pmu [ 1.524818@0] Advanced Linux Sound Architecture Driver Initialized. [ 1.531786@0] Switching to clocksource Timer-E [ 1.535234@0] FS-Cache: Loaded [ 1.545904@0] NET: Registered protocol family 2 [ 1.546413@0] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.552045@0] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 1.558647@0] TCP: Hash tables configured (established 4096 bind 4096) [ 1.565144@0] TCP: reno registered [ 1.568473@0] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.574463@0] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.581036@0] NET: Registered protocol family 1 [ 1.585561@0] RPC: Registered named UNIX socket transport module. [ 1.591441@0] RPC: Registered udp transport module. [ 1.596308@0] RPC: Registered tcp transport module. [ 1.601150@0] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.607809@0] wifi_dev_probe [ 1.610604@0] wifi_dt : interrupt_pin=GPIOX_21 [ 1.615023@0] wifi_dt : irq_num=null [ 1.618581@0] wifi_dt : irq_trigger_type=GPIO_IRQ_HIGH [ 1.623687@0] wifi_dt : power_on_pin=GPIOAO_6 [ 1.628032@0] wifi_dt : power_on_pin2=GPIOX_11 [ 1.632446@0] interrupt_pin=133, irq_num=4, irq_trigger_type=0, power_on_pin=6,clock_32k_pin=122 [ 1.641393@0] Unpacking initramfs... [ 1.645110@3] hdmitx: system: phy setting done [ 1.649177@3] Sink is HDMI device [ 1.652471@3] No sink attached [ 1.655565@3] hdmitx: audio: audio channel num is 0 [ 1.656133@0] Freeing initrd memory: 3748K [ 1.657809@0] bounce pool size: 64 pages [ 1.663591@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.664554@0] NFS: Registering the id_resolver key type [ 1.664584@0] Key type id_resolver registered [ 1.664586@0] Key type id_legacy registered [ 1.665378@0] msgmni has been set to 711 [ 1.666491@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.666497@0] io scheduler noop registered (default) [ 1.666499@0] io scheduler deadline registered [ 1.666712@0] io scheduler cfq registered [ 1.666720@0] io scheduler fiops registered [ 1.716979@3] hdmitx: audio: SPDIF [ 1.716989@3] hdmitx: audio: current VIC: 4 [ 1.716991@3] hdmitx: audio: audio sample rate: 0 [ 1.716992@3] hdmitx: audio: set audio N para [ 1.716999@3] hdmitx: audio: PCM out to HDMI [ 1.737460@3] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL [ 1.737462@3] hdmitx: audio: i2s_to_spdif_flag:1 [ 1.737463@3] hdmitx: audio: Enable audio spdif to HDMI [ 1.737519@3] hdmitx: audio: audio channel num is 0 [ 1.737524@3] hdmitx: audio: SPDIF [ 1.737535@3] hdmitx: audio: current VIC: 4 [ 1.737536@3] hdmitx: audio: audio sample rate: 0 [ 1.737537@3] hdmitx: audio: set audio N para [ 1.737544@3] hdmitx: audio: PCM out to HDMI [ 1.758026@3] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL [ 1.758028@3] hdmitx: audio: i2s_to_spdif_flag:1 [ 1.758029@3] hdmitx: audio: Enable audio spdif to HDMI [ 1.758085@3] hdmi detect: plug. [ 1.802183@0] loop: module loaded [ 1.803132@0] tun: Universal TUN/TAP device driver, 1.6 [ 1.806338@0] tun: (C) 1999-2004 Max Krasnyansky [ 1.813044@0] ethernet base addr is fe0c0000 [ 1.816920@0] key device don't create,extenal_api_key_set_version:2052 [ 1.823403@0] ret = -22 [ 1.823403@0] print_buff= [ 1.828442@0] key device don't create,extenal_api_key_set_version:2052 [ 1.834931@0] ret = -22 [ 1.834931@0] print_buff= [ 1.839979@0] efuse version is not selected. [ 1.844209@0] ID is not found [ 1.847191@0] stmmac - user ID: 0x10, Synopsys ID: 0x33 [ 1.852354@0] Normal descriptors [ 1.855655@0] Ring mode enabled [ 1.858857@0] No HW DMA feature register supported [ 1.863541@0] Wake-Up On Lan supported [ 1.887259@0] libphy: stmmac: probed [ 1.887291@0] eth%d: PHY ID 02430c54 at 0 IRQ POLL (stmmac-0:00) active [ 1.892335@0] PPP generic driver version 2.4.2 [ 1.896414@0] PPP BSD Compression module registered [ 1.901063@0] PPP Deflate Compression module registered [ 1.906282@0] PPP MPPE Compression module registered [ 1.911209@0] NET: Registered protocol family 24 [ 1.915903@0] usbcore: registered new interface driver asix [ 1.921453@0] usbcore: registered new interface driver ax88179_178a [ 1.927678@0] usbcore: registered new interface driver cdc_ether [ 1.933648@0] usbcore: registered new interface driver smsc95xx [ 1.939548@0] usbcore: registered new interface driver net1080 [ 1.945354@0] usbcore: registered new interface driver cdc_subset [ 1.951405@0] usbcore: registered new interface driver zaurus [ 1.957162@0] usbcore: registered new interface driver cdc_ncm [ 1.962939@0] usbcore: registered new interface driver qf9700 [ 1.968666@0] usbcore: registered new interface driver sr9600 [ 1.974538@0] usbcore: registered new interface driver usb-storage [ 1.980721@0] mousedev: PS/2 mouse device common for all mice [ 1.987104@0] usbcore: registered new interface driver iforce [ 1.992777@0] usbcore: registered new interface driver xpad [ 1.997662@0] i2c /dev entries driver [ 2.001516@0] device-mapper: uevent: version 1.0.3 [ 2.006118@0] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com [ 2.014909@0] hidraw: raw HID events driver (C) Jiri Kosina [ 2.020297@0] usbcore: registered new interface driver usbhid [ 2.025720@0] usbhid: USB HID core driver [ 2.030071@0] zram: Created 1 device(s) ... [ 2.034168@0] ashmem: initialized [ 2.037306@0] logger: created 256K log 'log_main' [ 2.041955@0] logger: created 256K log 'log_events' [ 2.046831@0] logger: created 256K log 'log_radio' [ 2.051597@0] logger: created 256K log 'log_system' [ 2.056396@0] vout_init_module [ 2.059388@0] start init vout module [ 2.062977@0] create vout attribute ok [ 2.066865@0] ge2d_init [ 2.069144@0] ge2d_dev major:245 [ 2.072539@0] ge2d start monitor [ 2.075599@0] osd_init [ 2.075603@3] ge2d workqueue monitor start [ 2.082000@0] osd_probe, vinfo:c0670ea0 [ 2.085958@0] Frame buffer memory assigned at phy:0x06100000, vir:0xf1000000, size=24576K [ 2.093935@0] osd_probe, mydef_var:c0906698, vinfo:c0670ea0 [ 2.099491@0] init fbdev bpp is :32 [ 2.102945@0] ---------------clear framebuffer0 memory [ 2.142804@0] Console: switching to colour frame buffer device 240x67 [ 2.176229@0] Frame buffer memory assigned at phy:0x07900000, vir:0xf0600000, size=1024K [ 2.178777@0] osd_probe, mydef_var:c0906698, vinfo:c0670ea0 [ 2.184324@0] don't find to display_size_default from mesonfb-dts [ 2.190401@0] init fbdev bpp is :24 [ 2.209487@0] osd probe ok [ 2.209690@0] enter aml_sysled_init [ 2.210109@0] enter aml_sysled_probe [ 2.213616@0] start read sedio dts [ 2.217094@0] sysled pdata->name:aml-setio [ 2.221159@0] sysled pdata->red_led_mode:1 [ 2.225242@0] sysled pdata->blue_led_mode:1 [ 2.229398@0] red_led_gpio is 135 [ 2.232687@0] blue_led_gpio is 135 [ 2.236509@0] DI: di_init [ 2.236534@0] DI: di_probe [ 2.236900@0] aml_wdt_driver_init,306 [ 2.239708@0] ** disable watchdog [ 2.243175@0] keys=========================================== [ 2.248757@0] keys_devno=f200000 [ 2.252101@0] securitykey: device aml_keys created [ 2.256725@0] amlkeys=0 [ 2.259210@0] platform_driver_register--aml_keys_driver-------------------- [ 2.266336@0] set uart_ao pinmux use pinctrl subsystem [ 2.271174@0] P_AO_RTI_PIN_MUX_REG:78005861 [ 2.275368@0] start uart_ao_ttyS0:(irq = 122) [ 2.279672@0] register uart_ao ok [ 2.283150@0] set uart_a pinmux use pinctrl subsystem [ 2.288012@0] P_AO_RTI_PIN_MUX_REG:78005861 [ 2.292162@0] start uart_a_ttyS1:(irq = 58) [ 2.296335@0] register uart_a ok [ 2.299705@0] start uart_d_ttyS4:(irq = 126) [ 2.303766@0] register uart_d ok [ 2.307124@0] dwc_otg: version 3.10a 12-MAY-2014 [ 2.311588@0] dwc_otg_driver_probe NOT match [ 2.315868@0] usb1: type: 1, speed: 0, config: 0, dma: 0, id: 1, phy: fe108820, ctrl: fe080000 [ 2.324406@0] USB (1) use clock source: XTAL input [ 2.350218@0] Core Release: 3.10a [ 2.350290@0] Setting default values for core params [ 2.352888@0] curmode: 1, host_only: 1 [ 2.376741@0] Using Buffer DMA mode [ 2.379917@0] OTG VER PARAM: 1, OTG VER FLAG: 1 [ 2.383096@0] Working on port type = HOST [ 2.386315@0] dwc_otg lm1: DWC OTG Controller [ 2.390592@0] dwc_otg lm1: new USB bus registered, assigned bus number 1 [ 2.397287@0] dwc_otg lm1: irq 63, io mem 0x00000000 [ 2.402193@0] -------hcd->flags.d32 = 0 [ 2.406041@0] Init: Port Power? op_state=1 [ 2.410082@0] Init1: Power Port (0) [ 2.413635@0] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.420502@0] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.427869@0] usb usb1: Product: DWC OTG Controller [ 2.432706@0] usb usb1: Manufacturer: Linux 3.10.108 dwc_otg_hcd [ 2.438701@0] usb usb1: SerialNumber: lm1 [ 2.443060@0] hub 1-0:1.0: USB hub found [ 2.446603@0] hub 1-0:1.0: 1 port detected [ 2.450816@0] usb0: type: 0, speed: 0, config: 0, dma: 0, id: 0, phy: fe108800, ctrl: fe040000 [ 2.459254@0] USB (0) use clock source: XTAL input [ 2.485029@0] Core Release: 3.10a [ 2.488385@0] Setting default values for core params [ 2.491778@0] curmode: 1, host_only: 0 [ 2.555264@0] Using Buffer DMA mode [ 2.558651@0] OTG VER PARAM: 1, OTG VER FLAG: 1 [ 2.562053@0] Working on port type = OTG [ 2.565419@0] Current port type: SLAVE [ 2.568746@0] dwc_otg lm0: DWC OTG Controller [ 2.572968@0] dwc_otg lm0: new USB bus registered, assigned bus number 2 [ 2.579662@0] dwc_otg lm0: irq 62, io mem 0x00000000 [ 2.584601@0] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.591521@0] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.598890@0] usb usb2: Product: DWC OTG Controller [ 2.603727@0] usb usb2: Manufacturer: Linux 3.10.108 dwc_otg_hcd [ 2.609724@0] usb usb2: SerialNumber: lm0 [ 2.614048@0] hub 2-0:1.0: USB hub found [ 2.617620@0] hub 2-0:1.0: 1 port detected [ 2.621794@0] Dedicated Tx FIFOs mode [ 2.625418@0] using timer detect id change, ef4a4000 [ 2.630399@0] boot_device_flag : -1 [ 2.633720@0] do not init nand [ 2.637102@0] boot_device_flag : -1 [ 2.641937@0] Amlogic A/V streaming port init [ 2.645294@1] Indeed it is in host mode hprt0 = 00021501 [ 2.646604@0] buffersize=262144,0,start=0 [ 2.646613@0] Subtitle stbuf alloced at 0xee8c0000, size = 262144 [ 2.646615@0] changed the (2) buffer size from 0 to 262144 [ 2.646855@0] init vdec memsource 9a00000->199fffff [ 2.647025@0] [tsync_pcr_init]init success. [ 2.647026@0] amvideocap_init_module [ 2.647054@0] amvideocap_probe,amvideocap [ 2.647058@0] amvideocap_dev_register buf:1c300000,size:800000. [ 2.647415@0] regist mpeg12 codec profile [ 2.647497@0] regist mpeg4 codec profile [ 2.647499@0] amvdec_vc1 module init [ 2.647579@0] regist vc1 codec profile [ 2.647580@0] amvdec_h264 module init [ 2.647697@0] regist h264 codec profile [ 2.647699@0] amvdec_h264mvc module init [ 2.647776@0] regist hmvc codec profile [ 2.647778@0] amvdec_h264_4k2k module init [ 2.647863@0] regist h264_4k2k codec profile [ 2.647865@0] amvdec_h265 module init [ 2.647945@0] regist hevc_unsupport codec profile [ 2.648026@0] regist mjpeg codec profile [ 2.648028@0] amvdec_real module init [ 2.648106@0] amvdec_avs module init [ 2.648283@0] amvenc_avc memory resource undefined. [ 2.648285@0] amvenc_avc memory is invaild, probe fail! [ 2.648294@0] amvenc_avc: probe of amvenc_avc.0 failed with error -14 [ 2.648399@0] jpegenc module init [ 2.648724@0] picdec buffer size is 4000000 [ 2.648879@0] alloc_keep_buffer keep_y_addr ee200000 [ 2.648892@0] alloc_keep_buffer keep_u_addr ee900000 [ 2.648901@0] alloc_keep_buffer keep_v_addr ede00000 [ 2.648903@0] yaddr=ee200000,u_addr=ee900000,v_addr=ede00000 [ 2.649182@0] create_ge2d_work_queue video task ok [ 2.649546@0] efuse=========================================== [ 2.649718@0] efuse: device efuse created [ 2.649815@0] efuse-------------------------------------------- [ 2.649816@0] SARADC Driver init. [ 2.649941@0] __saradc_probe__ [ 2.795225@0] saradc calibration: ref_val = 508 [ 2.795227@0] saradc calibration: ref_nominal = 512 [ 2.795229@0] saradc calibration: coef = 4072 [ 2.795534@0] ir irblaster probe [ 2.795791@0] Remote Driver [ 2.795856@0] Remote platform_data g_remote_base=fe600580 [ 2.795903@0] set drvdata completed [ 2.795910@0] device_create_file completed [ 2.796211@0] input: aml_keypad as /devices/platform/meson-remote/input/input0 [ 2.796449@0] input_register_device completed [ 2.796494@0] [0xffffff00] = 0x1dd0190 [ 2.796496@0] [0xffffff04] = 0xf800ca [ 2.796498@0] [0xffffff08] = 0x82006e [ 2.796499@0] [0xffffff0c] = 0x3c0030 [ 2.796501@0] [0xffffff10] = 0x30fa0013 [ 2.796502@0] [0xffffff18] = 0x6f19000 [ 2.796503@0] [0xffffff1c] = 0xbe40 [ 2.796505@0] [0x0] = 0xfa00a0 [ 2.796506@0] [0x4] = 0xfa00a0 [ 2.796507@0] [0x8] = 0xfa00a0 [ 2.796509@0] [0xc] = 0x640030 [ 2.796510@0] [0x10] = 0x30fa0013 [ 2.796512@0] [0x18] = 0x961b800 [ 2.796513@0] [0x1c] = 0x9740 [ 2.796514@0] [0x20] = 0x104 [ 2.796515@0] [0x24] = 0x0 [ 2.796517@0] [0x28] = 0x0 [ 2.796519@0] set_remote_mode[69] [ 2.796537@0] remote config major:236 [ 2.796718@0] physical address:0x2e868000 [ 2.796798@0] Meson KeyInput init [ 2.796927@0] GPIO Keypad Driver init. [ 2.796983@0] ==gpio_key_probe== [ 2.796987@0] gpio request set to High-Z status [ 2.797003@0] reg:2620,clearmask=400040,setmask=1 [ 2.797006@0] reg:2622,clearmask=ff0000,set pin=3 [ 2.797008@0] reg:2623,clearmask=7000000,setmask=7 [ 2.797011@0] reg:2620,clearmask=800080,setmask=10001 [ 2.797013@0] reg:2622,clearmask=ff000000,set pin=3 [ 2.797015@0] reg:2623,clearmask=70000000,setmask=7 [ 2.797057@0] power key(116) registed. [ 2.797209@0] input: gpio_keypad as /devices/platform/gpio_keypad.6/input/input1 [ 2.797326@0] gpio keypad register input device completed. [ 2.797331@0] gpio keypad major:235 [ 2.797573@0] spi_nor_init [ 2.797685@0] amlogic_spi_nor_probe: [ 2.797691@0] amlogic_spi->state_name:default [ 2.797806@0] AMLOGIC_SPI_NOR cc000000.spi: master is unqueued, this is deprecated [ 2.797913@0] check_storage_device : spi boot_device_flag : -1 [ 2.797914@0] spi_nor_probe [ 2.797917@0] spi_nor_probe 629 boot_device_flag 2 : do not init spi [ 2.797923@0] spi_nor: probe of apollospi:32766 failed with error -12 [ 2.797926@0] amlogic_spi_nor_probe over [ 2.798058@0] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error [ 2.798188@0] host->base fe108c20 [ 2.798227@0] pdata->caps 7 [ 2.798230@0] pdata->caps2 0 [ 2.798233@0] get property: port, value:0x00000001 [ 2.798236@0] get property: ocr_avail, value:0x00200000 [ 2.798238@0] get property: f_min, value:0x000493e0 [ 2.798240@0] get property: f_max, value:0x02faf080 [ 2.798242@0] get property: f_max_w, value:0x02faf080 [ 2.798245@0] get property: max_req_size, value:0x00020000 [ 2.798247@0] get property: irq_in, value:0x00000003 [ 2.798250@0] get property: irq_out, value:0x00000005 [ 2.798255@0] get property: gpio_cd, str:CARD_6 [ 2.798259@0] get property: pinname, str:sd [ 2.798262@0] get property: jtag_pin, str:CARD_0 [ 2.798265@0] get property: card_type, value:0x00000005 [ 2.798267@0] get property: gpio_dat3, str:CARD_4 [ 2.798279@0] normal card in [ 2.835122@3] sd: mmc_rescan_try_freq: trying to init card at 400000 Hz [ 2.835143@2] reg:2620,clearmask=80008,setmask=10001 [ 2.835146@2] reg:2621,clearmask=ff000000,set pin=64 [ 2.835149@2] reg:2623,clearmask=7000,setmask=7 [ 2.835152@2] reg:2620,clearmask=200020,setmask=1 [ 2.835154@2] reg:2622,clearmask=ff00,set pin=64 [ 2.835156@2] reg:2623,clearmask=700000,setmask=7 [ 2.845164@3] pdata->caps 107 [ 2.845166@3] pdata->caps2 0 [ 2.845169@3] get property: port, value:0x00000000 [ 2.845172@3] get property: ocr_avail, value:0x00200000 [ 2.845174@3] get property: f_min, value:0x000493e0 [ 2.845177@3] get property: f_max, value:0x02faf080 [ 2.845180@3] get property: max_req_size, value:0x00020000 [ 2.845185@3] get property: pinname, str:sdio [ 2.845188@3] get property: card_type, value:0x00000003 [ 2.864272@2] sd: new high speed SD card at address 1234, clock 35416666, 4-bit-bus-width [ 2.864566@3] mmcblk0: sd:1234 SA02G 1.85 GiB [ 2.896600@3] mmcblk0: p1 p2 [ 3.295244@0] [aml_sdio_probe] aml_sdio_probe() success! [ 3.300431@2] host->base fe108e00 [ 3.303198@2] pdata->caps 80000547 [ 3.305948@2] pdata->caps2 20 [ 3.308662@2] get property: port, value:0x00000005 [ 3.313715@2] get property: ocr_avail, value:0x00200080 [ 3.320224@2] get property: f_min, value:0x000493e0 [ 3.326724@2] get property: f_max, value:0x05f5e100 [ 3.333219@2] get property: max_req_size, value:0x00020000 [ 3.339730@2] get property: pinname, str:emmc [ 3.345534@2] get property: card_type, value:0x00000001 [ 3.352030@2] get property: gpio_dat3, str:BOOT_3 [ 3.358022@2] [is_emmc_exist] host->storage_flag=2, POR_BOOT_VALUE=3 [ 3.395117@0] emmc: mmc_rescan_try_freq: trying to init card at 400000 Hz [ 3.399030@0] aml_emmc_hw_reset 1338 [ 3.410270@1] mmc_init_card [ 3.415118@3] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 3.419157@3] Indeed it is in host mode hprt0 = 00001101 [ 3.468306@2] emmc: BKOPS_EN bit is not set [ 3.471769@2] Activate high speed [ 3.475109@2] [aml_sdhc_probe] aml_sdhc_probe() success! [ 3.475980@1] emmc: new high speed MMC card at address 0001, clock 47222222, 8-bit-bus-width [ 3.476320@0] mmcblk1: emmc:0001 NCard 7.21 GiB [ 3.476444@1] mmcblk1boot0: emmc:0001 NCard partition 1 2.00 MiB [ 3.476556@0] mmcblk1boot1: emmc:0001 NCard partition 2 2.00 MiB [ 3.477603@0] mmcblk1: p1 [ 3.477978@0] Delete invalid mbr partition part ee622400, part->partno 1 [ 3.478494@1] emmc read lba=0x12000, blocks=0x1 OK! [ 3.478843@1] emmc read lba=0x12001, blocks=0x1 OK! [ 3.478847@1] [mmc_read_partition_tbl] mmc read partition OK! [ 3.478848@1] add_emmc_partition [ 3.479013@1] [mmcblk1p01] bootloader offset 0x000000000000, size 0x000000400000 [ 3.479160@1] [mmcblk1p02] reserved offset 0x000002400000, size 0x000004000000 [ 3.479301@1] [mmcblk1p03] cache offset 0x000006c00000, size 0x000020000000 [ 3.479443@1] [mmcblk1p04] env offset 0x000027400000, size 0x000000800000 [ 3.479593@1] [mmcblk1p05] logo offset 0x000028400000, size 0x000002000000 [ 3.479723@1] [mmcblk1p06] recovery offset 0x00002ac00000, size 0x000002000000 [ 3.479849@1] [mmcblk1p07] misc offset 0x00002d400000, size 0x000002000000 [ 3.479984@1] [mmcblk1p08] boot offset 0x00002fc00000, size 0x000002000000 [ 3.480107@1] [mmcblk1p09] system offset 0x000032400000, size 0x000040000000 [ 3.480240@1] [mmcblk1p10] data offset 0x000072c00000, size 0x00015b500000 [ 3.480265@1] card key: card_blk_probe. [ 3.480269@1] emmc_key_init:428 emmc key lba_start:0x12020,lba_end:0x12220 [ 3.480272@1] i=0,register --- emmc_key [ 3.480274@1] emmc key: emmc_key_init:450 ok. [ 3.480345@1] Exit aml_emmc_partition_ops OK. [ 3.481605@0] mmcblk1boot1: p1 [ 3.481632@0] mmcblk1boot1: p1 start 16065 is beyond EOD, truncated [ 3.482947@0] mmcblk1boot0: p1 [ 3.482960@0] mmcblk1boot0: p1 start 16065 is beyond EOD, truncated [ 3.616410@3] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610 [ 3.616415@3] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.616419@3] usb 1-1: Product: USB2.0 Hub [ 3.617000@3] hub 1-1:1.0: USB hub found [ 3.617290@3] hub 1-1:1.0: 4 ports detected [ 3.684071@2] [dsp]DSP start addr 0xc5e00000 [ 3.688177@2] [dsp]register dsp to char divece(257) [ 3.693426@2] amlogic audio spdif interface device init! [ 3.698374@2] name=emmc_key nand_key [ 3.701841@2] device name=nand_key open error [ 3.706271@2] aml_keys: version 0 can not be init c090aac4 [ 3.711722@2] name=emmc_key emmc_key [ 3.720358@2] emmc read lba=0x12020, blocks=0x100 OK! [ 3.723947@2] register_aes_algorithm:488,new way [ 3.727929@3] key name:keyexample, key data:1234567890 [ 3.733296@3] aml_rtc rtc.0: rtc core: registered aml_rtc as rtc0 [ 3.740078@3] [RN5T618]call rn5t618_battery_probe in [ 3.740242@3] input: rn5t618_pmu as /devices/i2c-0/0-0032/rn5t618_pmu.0/input/input2 [ 3.746601@3] [RN5T618]use BSP configed battery parameters [ 3.746608@3] [RN5T618] NO BATTERY_PARAMETERS FOUND [ 3.757556@3] [RN5T618]call rn5t618_battery_probe exit, ret:0 [ 3.757632@3] [RN5T618]call rn5t618_battery_init, ret = 0 [ 3.758603@3] amaudio2: device amaudio2 created [ 3.761964@3] Amlogic CEC Driver, (c) 2016 Gerald Dachs, Version: 0.0.1 [ 3.767495@3] Error: Didn't get power valid value --- wifi_power_probe 323 [ 3.774130@3] wifi_power power_gpio is 6 [ 3.778044@3] wifi_power power_gpio2 is 123 [ 3.782489@3] bcmdhd_wlan_init() [ 3.785835@3] 1 bcmdhd_init_wlan_mem: wlan_static_skb[0]=ef4f5a80, size=3760 [ 3.792419@3] 1 bcmdhd_init_wlan_mem: wlan_static_skb[1]=ef4f5b40, size=3760 [ 3.799452@3] 1 bcmdhd_init_wlan_mem: wlan_static_skb[2]=ef4f5c00, size=3760 [ 3.806470@3] 1 bcmdhd_init_wlan_mem: wlan_static_skb[3]=ef4f5cc0, size=3760 [ 3.813485@3] 1 bcmdhd_init_wlan_mem: wlan_static_skb[4]=ef4f5d80, size=3760 [ 3.820559@3] 1 bcmdhd_init_wlan_mem: wlan_static_skb[5]=ef4f5e40, size=3760 [ 3.827559@3] 1 bcmdhd_init_wlan_mem: wlan_static_skb[6]=ef4f5f00, size=3760 [ 3.834570@3] 1 bcmdhd_init_wlan_mem: wlan_static_skb[7]=ef4f56c0, size=3760 [ 3.841594@3] 2 bcmdhd_init_wlan_mem: wlan_static_skb[8]=ef4f5600, size=7856 [ 3.848608@3] 2 bcmdhd_init_wlan_mem: wlan_static_skb[9]=ef4f5540, size=7856 [ 3.855636@3] 2 bcmdhd_init_wlan_mem: wlan_static_skb[10]=ef4f5480, size=7856 [ 3.862729@3] 2 bcmdhd_init_wlan_mem: wlan_static_skb[11]=ef4f53c0, size=7856 [ 3.869840@3] 2 bcmdhd_init_wlan_mem: wlan_static_skb[12]=ef4f5300, size=7856 [ 3.876957@3] 2 bcmdhd_init_wlan_mem: wlan_static_skb[13]=ef4f5240, size=7856 [ 3.884061@3] 2 bcmdhd_init_wlan_mem: wlan_static_skb[14]=ef4f5180, size=7856 [ 3.891161@3] 2 bcmdhd_init_wlan_mem: wlan_static_skb[15]=ef4f50c0, size=7856 [ 3.898273@3] 3 bcmdhd_init_wlan_mem: wlan_static_skb[16]=ef4f5000, size=16048 [ 3.905464@3] 4 bcmdhd_init_wlan_mem: wlan_mem_array[0]=ef4f5a80, size=20504 [ 3.912479@3] 4 bcmdhd_init_wlan_mem: wlan_mem_array[1]=ef4f5b40, size=20504 [ 3.919507@3] 4 bcmdhd_init_wlan_mem: wlan_mem_array[2]=ef4f5c00, size=81944 [ 3.926534@3] 4 bcmdhd_init_wlan_mem: wlan_mem_array[3]=ef4f5cc0, size=163864 [ 3.933629@3] 4 bcmdhd_init_wlan_mem: wlan_mem_array[4]=ef4f5d80, size=20504 [ 3.940669@3] 5 bcmdhd_init_wlan_mem: wlan_static_scan_buf0=ee650000, size=65536 [ 3.948029@0] usb 1-1.2: new full-speed USB device number 3 using dwc_otg [ 3.948036@3] 6 bcmdhd_init_wlan_mem: wlan_static_scan_buf1=ee730000, size=65536 [ 3.948038@3] bcmdhd_init_wlan_mem: WIFI MEM Allocated [ 3.948040@3] amlogic rfkill init [ 3.948088@3] enter bt_probe of_node [ 3.948092@3] not get gpio_en [ 3.948094@3] not get gpio_wake [ 3.975264@3] wifi_request_32k_clk : OFF-->ON for bt_rfkill [ 3.975267@3] clock_32k_pin(122) : (null) [ 3.975275@3] clock_32k_pin(122) : sdio_wifi [ 4.088629@3] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c52b [ 4.092920@3] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.100382@3] usb 1-1.2: Product: USB Receiver [ 4.104793@3] usb 1-1.2: Manufacturer: Logitech [ 4.145445@3] UMP: UMP device driver -7e2839c loaded [ 4.148569@3] aml_aes aml_aes: Aml AES [ 4.151728@3] aml_tdes aml_tdes: Aml TDES [ 4.155262@3] enter rt5616_modinit [ 4.158259@3] dummy_codec_platform_probe [ 4.161247@3] == ES8323 == es8323_modinit() [ 4.165406@3] enter aml_i2s_dai_probe [ 4.165413@3] i2s get no clk src setting in dts, use the default mpll 0 [ 4.171586@3] [aml-i2s-dai]enterd aml_i2s_dai_probe,old_samplerate:0,sample_rate=48000 [ 4.179652@3] enter aml_pcm_dai_probe [ 4.179737@3] [aml-spdif-dai]enter aml_dai_spdif_init [ 4.184500@3] [aml-spdif-dai]enterd aml_spdif_play,set_clock:-1,sample_rate=4 [ 4.191616@3] audio_set_958_clk, freq=4, [ 4.195519@3] IEC958 16bit [ 4.198353@3] hdmitx: audio: aout notify rate 48000 [ 4.203048@3] hdmitx: audio: aout notify size 16 [ 4.207649@3] hdmitx: audio: aout notify format CT_PCM [ 4.212758@3] hdmitx: audio: audio channel num is 1 [ 4.217621@3] hdmitx: audio: SPDIF [ 4.220998@3] hdmitx: audio: current VIC: 4 [ 4.225157@3] hdmitx: audio: audio sample rate: 3 [ 4.229832@3] hdmitx: audio: set audio N para [ 4.234170@3] hdmitx: audio: PCM out to HDMI [ 4.238420@3] hdmitx: audio: i2s_to_spdif_flag:1 [ 4.243094@3] hdmitx: audio: Enable audio spdif to HDMI [ 4.248305@3] hdmitx: audio: Audio Type: PCM [ 4.252586@3] hdmitx: audio: set audio param [ 4.256857@3] [aml-spdif-dai]aml_spdif_probe [ 4.261203@3] test codec dummy_codec [ 4.264594@3] using external codec, index = 1 [ 4.268935@3] using external dummy codec [ 4.272970@3] enter spdif_dit_probe [ 4.276389@3] aml_spdif_unmute [ 4.279708@3] codec_name = dummy_codec.0 [ 4.283625@3] enter aml_asoc_init [ 4.283649@3] p_aml_audio->hp_disable=1 [ 4.287227@3] falied to get spk event delay time paraments from dts file [ 4.293890@3] spk_event delay_time = 0 [ 4.298652@3] aml-i2s 0:playback preallocate_dma_buffer: area=f071c000, addr=2e300000, size=524288 [ 4.306811@3] aml-i2s 1:capture preallocate_dma_buffer: area=f079e000, addr=2f680000, size=65536 [ 4.315328@3] aml_snd_m8 aml_m8_sound_card.5: dummy_codec <-> aml-i2s-dai.0 mapping ok [ 4.324371@3] aml-i2s 0:playback preallocate_dma_buffer: area=f07bf000, addr=2dc00000, size=524288 [ 4.332467@3] aml-i2s 1:capture preallocate_dma_buffer: area=f0841000, addr=2e3c0000, size=65536 [ 4.340993@3] aml_snd_m8 aml_m8_sound_card.5: dit-hifi <-> aml-spdif-dai.0 mapping ok [ 4.349787@3] -----ext_codec=1--- [ 4.352860@3] =aml_m8_pinmux_init==,aml_m8_pinmux_init done,---0 [ 4.358417@3] TCP: cubic registered [ 4.362071@3] NET: Registered protocol family 10 [ 4.366750@3] NET: Registered protocol family 17 [ 4.370804@3] NET: Registered protocol family 15 [ 4.375433@3] Key type dns_resolver registered [ 4.380246@3] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 4.387615@3] Registering SWP/SWPB emulation handler [ 4.392537@3] enter meson_pm_init [ 4.395968@3] enter meson_pm_probe! [ 4.399302@3] meson_pm_probe done ! [ 4.403670@3] regulator-dummy: disabling [ 4.407247@3] console [netcon0] enabled [ 4.410480@3] netconsole: network logging started [ 4.415587@3] aml_rtc rtc.0: setting system clock to 1970-01-01 00:00:37 UTC (37) [ 4.422718@3] meson_cpufreq: no voltage_control prop [ 4.427563@3] voltage_control = 0 [ 4.432192@3] buf[0]=92,buf[1]=9b,err=4 [ 4.434662@3] M8:adc=441,TS_C=2,flag=1 [ 4.438396@3] efuse_flag=a [ 4.441077@3] amlogic_thermal_probe, this chip is trimmed, use thermal [ 4.447585@3] amlogic-thermal aml_thermal: amlogic thermal probe start [ 4.454080@3] #thermal-cells=7 [ 4.457116@3] pdata->temp_trip_count=4 [ 4.460841@3] temperature=70000 on trip point=0 [ 4.465352@3] fixing high_freq=1608001 to 1608000 at trip point 0,level=2 [ 4.472107@3] fixing low_freq=1608001 to 1608000 at trip point 0,level=2 [ 4.478783@3] gpu[0].gpu_high_freq=511,tmp_level[0].gpu_high_freq=511 [ 4.485201@3] cpu[0] core num==3 [ 4.488404@3] gpu[0] core num==5 [ 4.491611@3] temperature=80000 on trip point=1 [ 4.496123@3] fixing high_freq=1200001 to 1200000 at trip point 1,level=6 [ 4.502879@3] fixing low_freq=1200001 to 1200000 at trip point 1,level=6 [ 4.509555@3] gpu[1].gpu_high_freq=435,tmp_level[1].gpu_high_freq=435 [ 4.515973@3] cpu[1] core num==2 [ 4.519176@3] gpu[1] core num==4 [ 4.522383@3] temperature=90000 on trip point=2 [ 4.526895@3] fixing high_freq=800001 to 696000 at trip point 2,level=11 [ 4.533565@3] fixing low_freq=800001 to 696000 at trip point 2,level=11 [ 4.540154@3] gpu[2].gpu_high_freq=328,tmp_level[2].gpu_high_freq=328 [ 4.546572@3] cpu[2] core num==2 [ 4.549775@3] gpu[2] core num==3 [ 4.552982@3] temperature=260000 on trip point=3 [ 4.557581@3] fixing high_freq=-1 to -22 at trip point 3,level=-1 [ 4.563643@3] fixing low_freq=-1 to -22 at trip point 3,level=-1 [ 4.569626@3] gpu[3].gpu_high_freq=-1,tmp_level[3].gpu_high_freq=-1 [ 4.575871@3] cpu[3] core num==-1 [ 4.579160@3] gpu[3] core num==-1 [ 4.582455@3] idle interval=1000 [ 4.585666@3] pdata->name:aml_thermal [ 4.589630@3] tmp_trip[0].cpu_core_upper=1 [ 4.593384@3] tmp_trip[1].cpu_core_upper=2 [ 4.597467@3] tmp_trip[2].cpu_core_upper=2 [ 4.601535@3] tmp_trip[3].cpu_core_upper=-1 [ 4.605700@3] aml_thermal bind thermal-cpucore-0 okay ! [ 4.610906@3] aml_thermal bind thermal-cpufreq-0 okay ! [ 4.616219@3] amlogic: Kernel Thermal management registered [ 4.621637@3] amlogic-thermal aml_thermal: amlogic thermal probe done [ 4.628189@3] ALSA device list: [ 4.631172@3] #0: AML-M8AUDIO [ 4.634482@3] Freeing unused kernel memory: 192K [ 4.665662@2] tvmode set to 720p [ 4.665662@2] [ 4.665679@2] don't set the same mode as current. [ 4.750692@2] vfm_map_store:rm default [ 4.750692@2] [ 4.750809@2] vfm_map_store:add default decoder ppmgr deinterlace amvideo [ 4.750809@2] [ 4.778654@1] Checking disk(s): LABEL=LIBREELEC LABEL=STORAGE [ 4.791202@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 4.791224@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 4.791235@2] Buffer I/O error on device mmcblk0, logical block 485887 [ 4.792048@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 4.792065@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 4.792074@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 4.792083@2] Buffer I/O error on device mmcblk0, logical block 485887 [ 4.898018@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 4.898043@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 4.898056@2] Buffer I/O error on device mmcblk0p2, logical block 353791 [ 4.898883@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 4.898900@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 4.898910@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 4.898920@2] Buffer I/O error on device mmcblk0p2, logical block 353791 [ 5.389003@0] mmcblk0: r/w command failed, status = 0x80000b00 [ 5.389027@0] end_request: I/O error, dev mmcblk0, sector 3887096 [ 5.389039@0] Buffer I/O error on device mmcblk0, logical block 485887 [ 5.389856@0] mmcblk0: r/w command failed, status = 0x80000b00 [ 5.389873@0] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 5.389883@0] end_request: I/O error, dev mmcblk0, sector 3887096 [ 5.389892@0] Buffer I/O error on device mmcblk0, logical block 485887 [ 5.395690@0] mmcblk0: r/w command failed, status = 0x80000b00 [ 5.395708@0] end_request: I/O error, dev mmcblk0, sector 3887096 [ 5.395720@0] Buffer I/O error on device mmcblk0p2, logical block 353791 [ 5.396533@0] mmcblk0: r/w command failed, status = 0x80000b00 [ 5.396550@0] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 5.396559@0] end_request: I/O error, dev mmcblk0, sector 3887096 [ 5.396569@0] Buffer I/O error on device mmcblk0p2, logical block 353791 [ 5.598903@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 5.599016@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 5.599086@2] Buffer I/O error on device mmcblk0, logical block 485887 [ 5.600441@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 5.600532@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 5.600587@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 5.600642@2] Buffer I/O error on device mmcblk0, logical block 485887 [ 5.612388@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 5.613743@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 5.613831@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 5.758154@3] [RN5T618]battery vol change: 0->0 [ 6.387872@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 6.389445@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 6.389556@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 6.509202@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 6.509978@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 6.509987@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 6.993679@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 6.994583@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 6.994608@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 7.000995@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 7.001898@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 7.001921@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 7.232629@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 7.233405@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 7.233415@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 7.238803@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 7.239571@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 7.239580@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 7.925903@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 7.927596@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 7.927709@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 8.121652@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 8.123315@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 8.123428@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 8.611573@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 8.612878@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 8.612955@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 8.623553@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 8.624810@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 8.624881@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 8.928545@0] mmcblk0: r/w command failed, status = 0x80000b00 [ 8.930152@0] mmcblk0: r/w command failed, status = 0x80000b00 [ 8.930275@0] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 8.942498@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 8.944120@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 8.944241@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 9.727013@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 9.728761@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 9.728871@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 9.922504@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 9.922633@2] blk_update_request: 28 callbacks suppressed [ 9.922704@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 9.922770@2] quiet_error: 28 callbacks suppressed [ 9.922838@2] Buffer I/O error on device mmcblk0p2, logical block 353791 [ 9.924389@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 9.924501@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 9.924567@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 9.924639@2] Buffer I/O error on device mmcblk0p2, logical block 353791 [ 10.565848@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 10.565879@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 10.565896@2] Buffer I/O error on device mmcblk0, logical block 485887 [ 10.566755@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 10.566778@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 10.566791@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 10.566804@2] Buffer I/O error on device mmcblk0, logical block 485887 [ 10.573040@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 10.573063@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 10.573078@2] Buffer I/O error on device mmcblk0p2, logical block 353791 [ 10.573943@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 10.573964@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 10.573975@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 10.573989@2] Buffer I/O error on device mmcblk0p2, logical block 353791 [ 10.751432@0] mmcblk0: r/w command failed, status = 0x80000b00 [ 10.751497@0] end_request: I/O error, dev mmcblk0, sector 3887096 [ 10.751534@0] Buffer I/O error on device mmcblk0, logical block 485887 [ 10.752570@0] mmcblk0: r/w command failed, status = 0x80000b00 [ 10.752621@0] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 10.752652@0] end_request: I/O error, dev mmcblk0, sector 3887096 [ 10.752683@0] Buffer I/O error on device mmcblk0, logical block 485887 [ 10.760677@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 10.760738@1] end_request: I/O error, dev mmcblk0, sector 3887096 [ 10.760779@1] Buffer I/O error on device mmcblk0p2, logical block 353791 [ 10.761832@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 10.761883@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 10.761913@1] end_request: I/O error, dev mmcblk0, sector 3887096 [ 10.761947@1] Buffer I/O error on device mmcblk0p2, logical block 353791 [ 11.529782@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 11.531463@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 11.531579@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 11.679689@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 11.680464@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 11.680472@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 12.162873@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 12.163762@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 12.163786@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 12.170054@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 12.170925@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 12.170946@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 12.351494@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 12.352630@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 12.352686@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 12.361505@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 12.362628@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 12.362683@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 13.165685@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 13.167385@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 13.167501@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 13.343547@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 13.344324@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 13.344333@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 13.856079@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 13.857664@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 13.857781@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 13.869539@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 13.871035@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 13.871140@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 14.179449@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 14.181051@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 14.181166@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 14.193040@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 14.194694@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 14.194803@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 15.068189@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 15.068321@2] blk_update_request: 24 callbacks suppressed [ 15.068388@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 15.068454@2] quiet_error: 24 callbacks suppressed [ 15.068514@2] Buffer I/O error on device mmcblk0, logical block 485887 [ 15.070014@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 15.070125@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 15.070191@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 15.070261@2] Buffer I/O error on device mmcblk0, logical block 485887 [ 15.243695@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 15.243710@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 15.243716@2] Buffer I/O error on device mmcblk0p2, logical block 353791 [ 15.244482@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 15.244492@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 15.244495@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 15.244500@2] Buffer I/O error on device mmcblk0p2, logical block 353791 [ 15.772826@0] mmcblk0: r/w command failed, status = 0x80000b00 [ 15.772962@0] end_request: I/O error, dev mmcblk0, sector 3887096 [ 15.773046@0] Buffer I/O error on device mmcblk0, logical block 485887 [ 15.774557@0] mmcblk0: r/w command failed, status = 0x80000b00 [ 15.774668@0] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 15.774735@0] end_request: I/O error, dev mmcblk0, sector 3887096 [ 15.774807@0] Buffer I/O error on device mmcblk0, logical block 485887 [ 15.786708@0] mmcblk0: r/w command failed, status = 0x80000b00 [ 15.786827@0] end_request: I/O error, dev mmcblk0, sector 3887096 [ 15.786911@0] Buffer I/O error on device mmcblk0p2, logical block 353791 [ 15.788442@0] mmcblk0: r/w command failed, status = 0x80000b00 [ 15.788550@0] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 15.788616@0] end_request: I/O error, dev mmcblk0, sector 3887096 [ 15.788688@0] Buffer I/O error on device mmcblk0p2, logical block 353791 [ 15.993716@0] mmcblk0: r/w command failed, status = 0x80000b00 [ 15.993730@0] end_request: I/O error, dev mmcblk0, sector 3887096 [ 15.993736@0] Buffer I/O error on device mmcblk0, logical block 485887 [ 15.994501@0] mmcblk0: r/w command failed, status = 0x80000b00 [ 15.994511@0] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 15.994515@0] end_request: I/O error, dev mmcblk0, sector 3887096 [ 15.994519@0] Buffer I/O error on device mmcblk0, logical block 485887 [ 15.999912@0] mmcblk0: r/w command failed, status = 0x80000b00 [ 16.000680@0] mmcblk0: r/w command failed, status = 0x80000b00 [ 16.000688@0] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 16.719716@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 16.721323@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 16.721434@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 16.917497@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 16.919122@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 16.919234@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 17.501179@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 17.502066@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 17.502091@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 17.508365@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 17.509235@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 17.509258@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 17.749572@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 17.750345@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 17.750354@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 17.755749@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 17.756541@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 17.756549@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 18.440106@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 18.441790@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 18.441903@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 18.639381@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 18.640963@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 18.641077@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 19.109933@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 19.111064@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 19.111123@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 19.120064@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 19.121188@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 19.121243@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 19.349201@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 19.350613@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 19.350705@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 19.362425@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 19.363799@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 19.363883@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 20.068270@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 20.069972@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 20.070085@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 20.198125@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 20.198140@1] blk_update_request: 28 callbacks suppressed [ 20.198145@1] end_request: I/O error, dev mmcblk0, sector 3887096 [ 20.198149@1] quiet_error: 28 callbacks suppressed [ 20.198154@1] Buffer I/O error on device mmcblk0p2, logical block 353791 [ 20.198921@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 20.198931@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 20.198935@1] end_request: I/O error, dev mmcblk0, sector 3887096 [ 20.198939@1] Buffer I/O error on device mmcblk0p2, logical block 353791 [ 20.770712@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 20.770726@1] end_request: I/O error, dev mmcblk0, sector 3887096 [ 20.770732@1] Buffer I/O error on device mmcblk0, logical block 485887 [ 20.771499@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 20.771507@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 20.771511@1] end_request: I/O error, dev mmcblk0, sector 3887096 [ 20.771515@1] Buffer I/O error on device mmcblk0, logical block 485887 [ 20.776912@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 20.776921@1] end_request: I/O error, dev mmcblk0, sector 3887096 [ 20.776926@1] Buffer I/O error on device mmcblk0p2, logical block 353791 [ 20.777689@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 20.777697@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 20.777701@1] end_request: I/O error, dev mmcblk0, sector 3887096 [ 20.777705@1] Buffer I/O error on device mmcblk0p2, logical block 353791 [ 20.914620@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 20.914648@1] end_request: I/O error, dev mmcblk0, sector 3887096 [ 20.914664@1] Buffer I/O error on device mmcblk0, logical block 485887 [ 20.915514@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 20.915536@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 20.915548@1] end_request: I/O error, dev mmcblk0, sector 3887096 [ 20.915563@1] Buffer I/O error on device mmcblk0, logical block 485887 [ 20.921737@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 20.921757@1] end_request: I/O error, dev mmcblk0, sector 3887096 [ 20.921772@1] Buffer I/O error on device mmcblk0p2, logical block 353791 [ 20.922614@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 20.922634@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 20.922645@1] end_request: I/O error, dev mmcblk0, sector 3887096 [ 20.922659@1] Buffer I/O error on device mmcblk0p2, logical block 353791 [ 21.683430@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 21.685041@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 21.685299@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 21.806805@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 21.807585@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 21.807595@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 22.301915@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 22.302810@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 22.302835@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 22.309256@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 22.310142@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 22.310165@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 22.488576@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 22.489356@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 22.489365@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 22.494765@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 22.495536@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 22.495544@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 23.219739@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 23.221283@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 23.221395@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 23.327425@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 23.328500@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 23.328545@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 23.782928@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 23.784050@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 23.784108@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 23.792565@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 23.793687@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 23.793739@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 24.067801@0] mmcblk0: r/w command failed, status = 0x80000b00 [ 24.069393@0] mmcblk0: r/w command failed, status = 0x80000b00 [ 24.069508@0] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 24.081281@0] mmcblk0: r/w command failed, status = 0x80000b00 [ 24.082796@0] mmcblk0: r/w command failed, status = 0x80000b00 [ 24.082909@0] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 24.981996@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 24.983677@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 24.983793@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 25.106700@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 25.107478@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 25.107488@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 25.625862@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 25.625893@2] blk_update_request: 28 callbacks suppressed [ 25.625906@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 25.625919@2] quiet_error: 28 callbacks suppressed [ 25.625931@2] Buffer I/O error on device mmcblk0, logical block 485887 [ 25.626836@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 25.626858@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 25.626871@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 25.626884@2] Buffer I/O error on device mmcblk0, logical block 485887 [ 25.633067@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 25.633088@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 25.633103@2] Buffer I/O error on device mmcblk0p2, logical block 353791 [ 25.633958@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 25.633979@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 25.633990@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 25.634004@2] Buffer I/O error on device mmcblk0p2, logical block 353791 [ 25.788641@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 25.788688@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 25.788717@2] Buffer I/O error on device mmcblk0, logical block 485887 [ 25.789670@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 25.789707@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 25.789730@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 25.789753@2] Buffer I/O error on device mmcblk0, logical block 485887 [ 25.796959@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 25.796998@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 25.797025@2] Buffer I/O error on device mmcblk0p2, logical block 353791 [ 25.797967@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 25.798002@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 25.798023@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 25.798048@2] Buffer I/O error on device mmcblk0p2, logical block 353791 [ 26.531841@0] mmcblk0: r/w command failed, status = 0x80000b00 [ 26.531987@0] end_request: I/O error, dev mmcblk0, sector 3887096 [ 26.532069@0] Buffer I/O error on device mmcblk0, logical block 485887 [ 26.533497@0] mmcblk0: r/w command failed, status = 0x80000b00 [ 26.533616@0] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 26.533681@0] end_request: I/O error, dev mmcblk0, sector 3887096 [ 26.533749@0] Buffer I/O error on device mmcblk0, logical block 485887 [ 26.728008@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 26.729589@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 26.729706@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 27.180186@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 27.180964@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 27.180974@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 27.186383@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 27.187150@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 27.187159@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 27.328372@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 27.329366@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 27.329403@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 27.336792@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 27.337770@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 27.337804@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 28.089506@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 28.091128@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 28.091239@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 28.209355@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 28.210136@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 28.210144@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 28.859591@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 28.861191@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 28.861307@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 28.875556@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 28.877062@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 28.877170@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 29.033267@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 29.034155@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 29.034177@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 29.040457@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 29.041324@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 29.041345@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 29.793406@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 29.795057@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 29.795311@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 29.987990@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 29.989603@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 29.989718@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 30.799459@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 30.799591@2] blk_update_request: 26 callbacks suppressed [ 30.799662@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 30.799729@2] quiet_error: 26 callbacks suppressed [ 30.799792@2] Buffer I/O error on device mmcblk0, logical block 485887 [ 30.801321@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 30.801434@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 30.801500@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 30.801573@2] Buffer I/O error on device mmcblk0, logical block 485887 [ 30.813332@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 30.813440@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 30.813520@2] Buffer I/O error on device mmcblk0p2, logical block 353791 [ 30.814945@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 30.815050@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 30.815114@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 30.815294@2] Buffer I/O error on device mmcblk0p2, logical block 353791 [ 31.006655@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 31.006668@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 31.006673@2] Buffer I/O error on device mmcblk0, logical block 485887 [ 31.007438@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 31.007447@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 31.007451@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 31.007455@2] Buffer I/O error on device mmcblk0, logical block 485887 [ 31.012850@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 31.012858@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 31.012863@2] Buffer I/O error on device mmcblk0p2, logical block 353791 [ 31.013629@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 31.013637@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 31.013641@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 31.013645@2] Buffer I/O error on device mmcblk0p2, logical block 353791 [ 31.719815@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 31.719957@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 31.720039@2] Buffer I/O error on device mmcblk0, logical block 485887 [ 31.721550@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 31.721666@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 31.721730@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 31.721798@2] Buffer I/O error on device mmcblk0, logical block 485887 [ 31.875239@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 31.876017@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 31.876026@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 32.385648@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 32.387270@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 32.387382@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 32.399386@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 32.400879@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 32.400983@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 32.707694@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 32.709184@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 32.709297@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 32.721269@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 32.722856@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 32.722963@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 33.579720@0] mmcblk0: r/w command failed, status = 0x80000b00 [ 33.581334@0] mmcblk0: r/w command failed, status = 0x80000b00 [ 33.581445@0] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 33.703854@0] mmcblk0: r/w command failed, status = 0x80000b00 [ 33.704627@0] mmcblk0: r/w command failed, status = 0x80000b00 [ 33.704636@0] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 34.245635@0] mmcblk0: r/w command failed, status = 0x80000b00 [ 34.252595@0] mmcblk0: r/w command failed, status = 0x80000b00 [ 34.254095@0] mmcblk0: r/w command failed, status = 0x80000b00 [ 34.254205@0] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 34.266141@0] mmcblk0: r/w command failed, status = 0x80000b00 [ 34.267767@0] mmcblk0: r/w command failed, status = 0x80000b00 [ 34.267880@0] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 34.548450@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 34.549231@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 34.549241@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 34.554634@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 34.555405@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 34.555414@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 35.242038@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 35.243589@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 35.243701@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 35.438227@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 35.439810@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 35.439924@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 36.115802@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 36.115818@2] blk_update_request: 27 callbacks suppressed [ 36.115823@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 36.115827@2] quiet_error: 27 callbacks suppressed [ 36.115832@2] Buffer I/O error on device mmcblk0, logical block 485887 [ 36.116601@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 36.116611@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 36.116615@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 36.116619@2] Buffer I/O error on device mmcblk0, logical block 485887 [ 36.122011@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 36.122021@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 36.122026@2] Buffer I/O error on device mmcblk0p2, logical block 353791 [ 36.122789@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 36.122798@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 36.122802@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 36.122806@2] Buffer I/O error on device mmcblk0p2, logical block 353791 [ 36.289870@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 36.289937@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 36.289978@2] Buffer I/O error on device mmcblk0, logical block 485887 [ 36.291113@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 36.291167@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 36.291201@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 36.291236@2] Buffer I/O error on device mmcblk0, logical block 485887 [ 36.299645@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 36.299699@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 36.299739@2] Buffer I/O error on device mmcblk0p2, logical block 353791 [ 36.300861@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 36.300914@2] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 36.300946@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 36.300984@2] Buffer I/O error on device mmcblk0p2, logical block 353791 [ 37.147083@0] mmcblk0: r/w command failed, status = 0x80000b00 [ 37.147226@0] end_request: I/O error, dev mmcblk0, sector 3887096 [ 37.147312@0] Buffer I/O error on device mmcblk0, logical block 485887 [ 37.148908@0] mmcblk0: r/w command failed, status = 0x80000b00 [ 37.149020@0] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 37.149088@0] end_request: I/O error, dev mmcblk0, sector 3887096 [ 37.149158@0] Buffer I/O error on device mmcblk0, logical block 485887 [ 37.342452@0] mmcblk0: r/w command failed, status = 0x80000b00 [ 37.344053@0] mmcblk0: r/w command failed, status = 0x80000b00 [ 37.344167@0] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 38.025521@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 38.026437@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 38.026461@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 38.032657@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 38.033527@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 38.033548@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 38.192890@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 38.193910@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 38.193952@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 38.201685@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 38.202686@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 38.202726@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 38.972856@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 38.974532@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 38.974647@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 39.099355@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 39.100134@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 39.100143@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 39.620916@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 39.621687@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 39.621697@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 39.627321@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 39.628203@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 39.628225@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 39.777812@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 39.778776@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 39.778808@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 39.785622@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 39.786580@1] mmcblk0: r/w command failed, status = 0x80000b00 [ 39.786611@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1 [ 40.011767@0] fsck: fsck: couldn't find matching filesystem: LABEL=STORAGE [ 40.655468@2] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (2c0) [ 40.658131@2] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (2c0) [ 40.660731@2] force enable DISCARD here for ext4 fs [ 40.707555@0] checked enable EXT4 DISCARD here [ 40.707651@0] EXT4-fs (mmcblk0p2): mounting with "discard" option, but the device does not support discard [ 40.707734@0] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 41.528325@0] systemd[1]: System time before build time, advancing clock. [ 41.586813@0] systemd[1]: systemd 242 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid) [ 41.587063@0] systemd[1]: Detected architecture arm. [ 41.587130@0] systemd[1]: Running with unpopulated /etc. [ 41.587342@0] systemd[1]: Set hostname to . [ 41.587424@0] systemd[1]: Cannot open /etc/machine-id: No such file or directory [ 41.823716@2] systemd[1]: Populated /etc with preset unit settings. [ 41.851713@2] systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 41.851729@2] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 41.922677@2] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 41.923090@2] systemd[1]: Listening on Journal Socket (/dev/log). [ 41.924638@2] systemd[1]: Starting Show Version... [ 41.925236@2] systemd[1]: Listening on udev Kernel Socket. [ 41.925773@2] systemd[1]: Listening on Journal Socket. [ 41.926412@2] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 41.927818@2] systemd[1]: Starting Wait For Kernel Time Synchronized... [ 41.929817@2] systemd[1]: Mounting Kernel Debug File System... [ 41.931767@2] systemd[1]: Mounting POSIX Message Queue File System... [ 41.932206@2] systemd[1]: Created slice User and Session Slice. [ 41.932389@2] systemd[1]: Reached target Slices. [ 41.933529@2] systemd[1]: Mounting Variable Directory... [ 41.933927@2] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 41.934319@2] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 41.934833@2] systemd[1]: Listening on udev Control Socket. [ 41.935210@2] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 41.935321@2] systemd[1]: Reached target Paths. [ 41.936750@2] systemd[1]: Starting Debug Shell on /dev/ttyS0... [ 41.937998@2] systemd[1]: Starting Create Persistent Log Directory on /storage... [ 41.939373@2] systemd[1]: Starting Setup NTP servers for timesyncd... [ 41.939950@2] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 41.940885@2] systemd[1]: Listening on RPCbind Server Activation Socket. [ 41.940997@2] systemd[1]: Reached target RPC Port Mapper. [ 41.955113@3] Changing uart_ao_ttyS0: baud from 0 to 115200 [ 42.048155@2] systemd[1]: Started Show Version. [ 42.048856@2] systemd[1]: Mounted Kernel Debug File System. [ 42.049556@2] systemd[1]: Mounted POSIX Message Queue File System. [ 42.050161@2] systemd[1]: Mounted Variable Directory. [ 42.052523@2] systemd[1]: Started Debug Shell on /dev/ttyS0. [ 42.053684@2] systemd[1]: Started Create Persistent Log Directory on /storage. [ 42.054777@2] systemd[1]: Started Setup NTP servers for timesyncd. [ 42.055978@2] systemd[1]: Condition check resulted in Persistent Log Storage being skipped. [ 42.058408@2] systemd[1]: Starting Create kernel modules tree from overlays... [ 42.104728@2] kernel-overlays-setup: setup base modules [ 42.144032@2] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/3.10.108 [ 42.180922@2] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware [ 42.181064@2] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays [ 42.181252@2] kernel-overlays-setup: done [ 42.182371@3] systemd[1]: kernel-overlays.service: Succeeded. [ 42.182574@3] systemd[1]: Started Create kernel modules tree from overlays. [ 42.185319@3] systemd[1]: Starting Load Kernel Modules... [ 42.185797@3] systemd[1]: Condition check resulted in Mounting swapfile being skipped. [ 42.185979@3] systemd[1]: Reached target Swap. [ 42.187858@3] systemd[1]: Mounting Temporary Directory (/tmp)... [ 42.190119@3] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 42.192555@3] systemd[1]: Starting udev Coldplug all Devices... [ 42.194472@3] systemd[1]: Starting Setup machine-id... [ 42.199009@3] systemd[1]: Mounted Temporary Directory (/tmp). [ 42.199706@3] systemd[1]: Reached target Local File Systems. [ 42.206370@3] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 42.342124@0] Linux video capture interface: v2.00 [ 42.399974@1] amlvideo-000: V4L2 device registered as video10 [ 42.448494@2] systemd[1]: Started udev Coldplug all Devices. [ 42.462013@2] systemd[1]: Started Setup machine-id. [ 42.463274@1] pdata->tmp_trip[0].gpu_lower_level=1 [ 42.463283@1] pdata->tmp_trip[0].gpu_upper_level=1 [ 42.463308@1] pdata->tmp_trip[1].gpu_lower_level=2 [ 42.463315@1] pdata->tmp_trip[1].gpu_upper_level=2 [ 42.463333@1] pdata->tmp_trip[2].gpu_lower_level=3 [ 42.463339@1] pdata->tmp_trip[2].gpu_upper_level=3 [ 42.463369@1] pdata->tmp_trip[3].gpu_lower_level=-1 [ 42.463376@1] pdata->tmp_trip[3].gpu_upper_level=-1 [ 42.463392@1] aml_thermal bind thermal-gpufreq-0 okay ! [ 42.463402@1] gpu cooling register okay with err=0 [ 42.463576@1] tmp_trip[0].gpu_core_upper=1 [ 42.463597@1] tmp_trip[1].gpu_core_upper=2 [ 42.463611@1] tmp_trip[2].gpu_core_upper=3 [ 42.463621@1] tmp_trip[3].gpu_core_upper=-1 [ 42.463637@1] aml_thermal bind thermal-gpucore-0 okay ! [ 42.463644@1] gpu core cooling register okay with err=0 [ 42.463777@1] Mali: Mali device driver loaded [ 42.463964@2] systemd[1]: Starting Create Static Device Nodes in /dev... [ 42.467279@2] systemd[1]: Starting Journal Service... [ 42.489144@1] wireguard: WireGuard 1.0.20200908 loaded. See www.wireguard.com for information. [ 42.489154@1] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld . All Rights Reserved. [ 42.490381@0] systemd[1]: Started Load Kernel Modules. [ 42.491104@0] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 42.492556@0] systemd[1]: Starting Apply Kernel Variables... [ 42.492902@0] systemd[1]: Condition check resulted in Kernel Configuration File System being skipped. [ 42.516935@0] systemd[1]: Started Create Static Device Nodes in /dev. [ 42.525960@0] systemd[1]: Started Apply Kernel Variables. [ 42.571226@0] systemd[1]: Started Journal Service. [ 42.591222@2] systemd-journald[2003]: Received request to flush runtime journal from PID 1 [ 43.751634@2] Console: switching to colour dummy device 80x30 [ 43.922681@3] mmcblk0: r/w command failed, status = 0x80000b00 [ 43.922729@3] blk_update_request: 22 callbacks suppressed [ 43.922735@3] end_request: I/O error, dev mmcblk0, sector 3887096 [ 43.922744@3] quiet_error: 22 callbacks suppressed [ 43.922749@3] Buffer I/O error on device mmcblk0, logical block 485887 [ 43.958057@0] wifi_setup_dt [ 43.958073@0] wifi_request_32k_clk : ON-->ON for sdio_wifi [ 43.958077@0] interrupt_pin(133) : (null) [ 43.958095@0] reg:2620,clearmask=100010,setmask=0 [ 43.958099@0] reg:2622,clearmask=ff,set pin=133 [ 43.958102@0] reg:2623,clearmask=70000,setmask=4 [ 43.958105@0] interrupt_pin(133) : sdio_wifi [ 43.958108@0] power_on_pin(6) : (null) [ 43.958118@0] power_on_pin(6) : sdio_wifi [ 43.958122@0] power_on_pin2(123) : (null) [ 43.958130@0] power_on_pin2(123) : sdio_wifi [ 43.975135@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 43.975158@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 43.975166@2] Buffer I/O error on device mmcblk0, logical block 485887 [ 44.000482@1] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-lm1-1.2/input2 [ 44.030682@2] mmcblk0: r/w command failed, status = 0x80000b00 [ 44.030702@2] end_request: I/O error, dev mmcblk0, sector 3887096 [ 44.030709@2] Buffer I/O error on device mmcblk0p2, logical block 1415164 [ 44.030713@2] end_request: I/O error, dev mmcblk0, sector 3887098 [ 44.030716@2] Buffer I/O error on device mmcblk0p2, logical block 1415165 [ 44.030718@2] end_request: I/O error, dev mmcblk0, sector 3887100 [ 44.030720@2] Buffer I/O error on device mmcblk0p2, logical block 1415166 [ 44.030722@2] end_request: I/O error, dev mmcblk0, sector 3887102 [ 44.030724@2] Buffer I/O error on device mmcblk0p2, logical block 1415167 [ 44.041426@3] mmcblk0: r/w command failed, status = 0x80000b00 [ 44.041451@3] end_request: I/O error, dev mmcblk0, sector 3887096 [ 44.041459@3] Buffer I/O error on device mmcblk0p2, logical block 1415164 [ 44.041471@3] end_request: I/O error, dev mmcblk0, sector 3887098 [ 44.041474@3] Buffer I/O error on device mmcblk0p2, logical block 1415165 [ 44.041477@3] end_request: I/O error, dev mmcblk0, sector 3887100 [ 44.041479@3] Buffer I/O error on device mmcblk0p2, logical block 1415166 [ 44.041482@3] end_request: I/O error, dev mmcblk0, sector 3887102 [ 44.041484@3] Buffer I/O error on device mmcblk0p2, logical block 1415167 [ 44.049080@0] cur_mode = 0 [ 44.049085@0] [0x0] = 0x1dd0190 [ 44.049088@0] [0x4] = 0xf800ca [ 44.049089@0] [0x8] = 0x82006e [ 44.049090@0] [0xc] = 0x3c0030 [ 44.049093@0] [0x10] = 0x30fa0013 [ 44.049095@0] [0x18] = 0x6f19000 [ 44.049096@0] [0x1c] = 0x9f40 [ 44.049097@0] [0x20] = 0x0 [ 44.049100@0] [0x24] = 0x0 [ 44.049101@0] [0x28] = 0x0 [ 44.049104@0] set_remote_mode[69] [ 44.050070@0] input: Logitech Unifying Device. Wireless PID:404d as /devices/lm1/usb1/1-1/1-1.2/1-1.2:1.2/0003:046D:C52B.0003/input/input3 [ 44.079245@0] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:404d] on usb-lm1-1.2:1 [ 44.266807@0] WIFI Disable! 6 [ 43.953351@1] amlvideo openamlvideo close [ 44.534828@1] amlvideo open<4>[ 44.808738@1] eth0: device MAC address 00:01:23:cd:ee:af [ 44.820727@1] No MAC Management Counters available [ 45.312180@1] 8021q: 802.1Q VLAN Support v1.8 [ 46.277346@1] Triggered SDIO WiFi power on and bus rescan. [ 46.277464@1] WIFI Enable! 6 [ 46.888221@2] sdio: mmc_rescan_try_freq: trying to init card at 400000 Hz [ 44.535281@2] amlvideo close [ 47.885331@2] [aml_sdio_timeout] time_start_cnt:996 [ 47.885331@2] [aml_sdio_print_err] sdio: Timeout error, Cmd52 arg 0xc00, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x3f001f00, conf->cmd_clk_divide=177, pdata->clkc=177, conf->bus_width=0, pdata->width=0, conf=0x416270b1, clock=397940 [ 47.885554@0] [ 48.885290@0] [aml_sdio_timeout] time_start_cnt:999 [ 48.885290@0] [aml_sdio_print_err] sdio: Timeout error, Cmd52 arg 0x80000c08, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x1f001f00, conf->cmd_clk_divide=177, pdata->clkc=177, conf->bus_width=0, pdata->width=0, conf=0x416270b1, clock=397940 [ 48.885518@1] [ 49.885336@1] [aml_sdio_timeout] time_start_cnt:995 [ 49.885336@1] <4>[ 49.901547@0] sdio: queuing unknown CIS tuple 0x80 (2 bytes) [ 49.904199@0] sdio: queuing unknown CIS tuple 0x80 (3 bytes) [ 49.906845@2] sdio: queuing unknown CIS tuple 0x80 (3 bytes) [ 49.911091@2] sdio: queuing unknown CIS tuple 0x80 (7 bytes) [ 50.006300@1] sdio: new high speed SDIO card at address 0001, clock 35416666, 4-bit-bus-width [ 49.885556@1] [aml_sdio_print_err] sdio: Timeout error, Cmd8 arg 0x1aa, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x3f003f00, conf->cmd_clk_divide=177, pdata->clkc=177, conf->bus_width=0, pdata->width=0, conf=0x416270b1, clock=397940 [ 49.885556@1] [ 50.100217@1] cfg80211: Calling CRDA to update world regulatory domain [ 50.100308@1] cfg80211: World regulatory domain updated: [ 50.100314@1] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 50.100320@1] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (2000 mBi, 0 mBm) [ 50.100325@1] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (2000 mBi, 0 mBm) [ 50.100329@1] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (2000 mBi, 0 mBm) [ 50.100333@1] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (2000 mBi, 0 mBm) [ 50.100337@1] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (2000 mBi, 0 mBm) [ 50.100340@1] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (2000 mBi, 0 mBm) [ 50.100344@1] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (2000 mBi, 0 mBm) [ 50.100353@1] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm) [ 50.374374@3] [sdio_reinit] finish [ 50.477892@2] dhd_module_init: in [ 50.477905@2] wifi_setup_dt [ 50.477911@2] wifi_request_32k_clk : ON-->ON for sdio_wifi [ 50.477916@2] interrupt_pin(133) : sdio_wifi [ 50.477922@2] sdio_wifi is using the pin GPIOX_21 [ 50.477925@2] wifi_dt : gpio op failed(-16) at line 210 [ 50.477935@2] reg:2620,clearmask=100010,setmask=0 [ 50.477940@2] reg:2622,clearmask=ff,set pin=133 [ 50.477944@2] reg:2623,clearmask=70000,setmask=4 [ 50.477947@2] interrupt_pin(133) : sdio_wifi [ 50.477951@2] power_on_pin(6) : sdio_wifi [ 50.477954@2] sdio_wifi is using the pin GPIOAO_6 [ 50.477956@2] wifi_dt : gpio op failed(-16) at line 232 [ 50.477961@2] power_on_pin(6) : sdio_wifi [ 50.477964@2] power_on_pin2(123) : sdio_wifi [ 50.477967@2] sdio_wifi is using the pin GPIOX_11 [ 50.477970@2] wifi_dt : gpio op failed(-16) at line 244 [ 50.477973@2] power_on_pin2(123) : sdio_wifi [ 50.477981@2] ======== bcm_wlan_set_plat_data ======== [ 50.477987@2] host_oob_irq: 100 [ 50.477991@2] host_oob_irq_flags=1044 [ 50.477995@2] dhd_wifi_platform_load: Enter [ 50.478017@2] Power-up adapter 'DHD generic adapter' [ 50.478021@2] wifi_platform_set_power = 1 [ 50.478024@2] ======== PULL WL_REG_ON HIGH! ======== [ 50.478030@2] WIFI Disable! 6 [ 50.677845@2] WIFI Enable! 6 [ 51.185132@2] wifi_platform_bus_enumerate device present 1 [ 51.185146@2] ======== Card detection to detect SDIO card! ======== [ 51.185153@2] sdio_reset_comm(): [ 51.233301@0] sdio: queuing unknown CIS tuple 0x80 (2 bytes) [ 51.235133@0] sdio: queuing unknown CIS tuple 0x80 (3 bytes) [ 51.236928@0] sdio: queuing unknown CIS tuple 0x80 (3 bytes) [ 51.240132@0] sdio: queuing unknown CIS tuple 0x80 (7 bytes) [ 51.290037@2] [sdio_reinit] finish [ 51.406028@0] bcmsdh_register: register client driver [ 51.433369@0] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter [ 51.435214@1] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter [ 51.435222@1] bus num (host idx)=1, slot num (rca)=1 [ 51.435227@1] found adapter info 'DHD generic adapter' [ 51.435237@1] 7 bcmdhd_mem_prealloc: wlan_mem_array[section].mem_ptr=c0912500, size=139264 [ 51.435241@1] success alloc section 3, size 139264 [ 51.435502@1] alloc static buf at ee000000! [ 51.435506@1] 1 bcmdhd_mem_prealloc: section=4, wlan_static_skb=c0b4632c [ 51.435509@1] success alloc section 4, size 0 [ 51.473655@1] dhdsdio_probe : no mutex held. set lock [ 51.501994@1] F1 signature read @0x18000000=0x16044330 [ 52.086307@1] F1 signature OK, socitype:0x1 chip:0x4330 rev:0x4 pkg:0x0 [ 52.091150@1] DHD: dongle ram size is set to 294912(orig 294912) at 0x0 [ 52.093576@1] 4 bcmdhd_mem_prealloc: section=7, wlan_mem_array[4]=ee740000 [ 52.093646@1] success alloc section 7, size 19744 [ 52.093851@1] dhd_conf_set_chiprev: chip=0x4330, chiprev=4 [ 52.094392@1] dhd_conf_set_conf_path_by_nv_path: config_path=/lib/firmware/broadcom/config.txt [ 52.096112@1] dhd_conf_read_config: Ignore config file /lib/firmware/broadcom/config.txt [ 52.096452@1] 7 bcmdhd_mem_prealloc: wlan_mem_array[section].mem_ptr=c09124e8, size=10416 [ 52.096513@1] success alloc section 0, size 10416 [ 52.106190@1] 2 bcmdhd_mem_prealloc: section=5, wlan_static_scan_buf0=ee650000 [ 52.106286@1] success alloc section 5, size 65536 [ 52.107603@1] wl_create_event_handler(): thread:wl_event_handler:933 started [ 52.108897@1] tsk Enter, tsk = 0xed5b669c [ 52.110422@1] dhd_attach(): thread:dhd_watchdog_thread:935 started [ 52.110988@1] dhd_attach(): thread:dhd_dpc:936 started [ 52.111377@1] dhd_dpc_thread: set dpc_cpucore 0 from config.txt [ 52.111736@1] dhd_attach(): thread:dhd_rxf:937 started [ 52.111835@1] dhd_deferred_work_init: work queue initialized [ 52.111958@1] 7 bcmdhd_mem_prealloc: wlan_mem_array[section].mem_ptr=c09124f0, size=10396 [ 52.112015@1] success alloc section 1, size 10396 [ 52.112124@1] 7 bcmdhd_mem_prealloc: wlan_mem_array[section].mem_ptr=c09124f8, size=65536 [ 52.112175@1] success alloc section 2, size 65536 [ 52.113574@1] dhdsdio_probe_init: set use_rxchain 0 from config.txt [ 52.135312@1] Dongle Host Driver, version 1.201.59.5 (r506368) [ 52.135312@1] Compiled in drivers/net/wireless/bcmdhd [ 52.135938@1] Register interface [wlan0] MAC: 04:e6:76:48:7f:04 [ 52.135938@1] [ 52.135952@1] dhd_prot_ioctl : bus is down. we have nothing to do [ 52.148321@2] bcmsdh_oob_intr_unregister: Enter [ 52.148333@2] bcmsdh_oob_intr_unregister: irq is not registered [ 52.148344@2] dhd_txglom_enable: enable 0 [ 52.148349@2] dhd_bus_devreset: WLAN OFF DONE [ 52.148408@2] wifi_platform_set_power = 0 [ 52.148412@2] ======== PULL WL_REG_ON LOW! ======== [ 52.148418@2] dhdsdio_probe : the lock is released. [ 52.148617@2] dhd_module_init: Exit err=0 [ 52.150331@1] dhd_open: Enter ef384000 [ 52.150352@1] [ 52.150352@1] Dongle Host Driver, version 1.201.59.5 (r506368) [ 52.150352@1] Compiled in drivers/net/wireless/bcmdhd [ 52.150360@1] wl_android_wifi_on in 1 [ 52.150364@1] wl_android_wifi_on in 2: g_wifi_on=0 [ 52.150370@1] wifi_platform_set_power = 1 [ 52.150374@1] ======== PULL WL_REG_ON HIGH! ======== [ 52.150386@1] WIFI Disable! 6 [ 52.285131@2] Changing uart_a_ttyS1: baud from 0 to 115200 [ 52.350720@1] WIFI Enable! 6 [ 52.855148@1] sdio_reset_comm(): [ 52.911199@2] sdio: queuing unknown CIS tuple 0x80 (2 bytes) [ 52.913035@2] sdio: queuing unknown CIS tuple 0x80 (3 bytes) [ 52.971370@2] [ 52.971370@2] [ 52.971370@2] dhd_bus_devreset: == WLAN ON == [ 52.973980@2] F1 signature read @0x18000000=0x16044330 [ 52.978944@0] F1 signature OK, socitype:0x1 chip:0x4330 rev:0x4 pkg:0x0 [ 52.979886@0] DHD: dongle ram size is set to 294912(orig 294912) at 0x0 [ 52.980599@0] dhdsdio_probe_init: set use_rxchain 0 from config.txt [ 52.980971@2] dhd_conf_read_config: Ignore config file /lib/firmware/broadcom/config.txt [ 52.980993@2] dhd_conf_set_fw_name_by_chip: firmware_path=/lib/firmware/broadcom/fw_bcm40183b2.bin [ 52.981005@2] Final fw_path=/lib/firmware/broadcom/fw_bcm40183b2.bin [ 52.981015@2] Final nv_path=/lib/firmware/broadcom/ap6330_nvram.txt [ 52.981023@2] Final conf_path=/lib/firmware/broadcom/config.txt [ 53.190579@3] NVRAM version: AP6330_NVRAM_V1.0_20121130 [ 53.197041@1] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. [ 54.100519@2] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us) [ 54.101953@2] bcmsdh_oob_intr_register: Enter [ 54.102025@2] bcmsdh_oob_intr_register: HW_OOB enabled [ 54.102090@2] bcmsdh_oob_intr_register OOB irq=100 flags=414 [ 54.102254@2] bcmsdh_oob_intr_register: enable_irq_wake [ 54.102317@2] bcmsdh_oob_intr_register: enable_irq_wake failed with -6 [ 54.203508@2] dhd_conf_set_band: Set band 0 [ 54.331269@2] dhd_preinit_ioctls: Set tcpack_sup_mode 0 [ 54.333254@2] Firmware up: op_mode=0x0005, MAC=04:e6:76:48:7f:04 [ 54.333264@2] dhd_conf_set_country: Set country ALL, revision 0 [ 54.406043@2] Country code: ALL (ALL/0) [ 54.406377@2] dhd_conf_set_roam: Set roam_off 1 [ 54.408550@2] dhd_preinit_ioctls buf_key_b4_m4 set failed -23 [ 54.415352@3] Firmware version = wl0: Jan 6 2014 15:11:29 version 5.90.195.89.13 FWID 01-72f124c5 [ 54.415373@3] Driver: 1.201.59.5 (r506368) [ 54.415373@3] Firmware: wl0: Jan 6 2014 15:11:29 version 5.90.195.89.13 FWID 01-72f124c5 [ 54.415655@3] dhd_txglom_enable: enable 0 [ 54.415662@3] dhd_conf_set_disable_proptx: set disable_proptx 1 [ 54.421196@2] dhd_preinit_ioctls wl ampdu_hostreorder failed -23 [ 54.421620@2] wl_android_wifi_on: Success [ 55.083158@1] dhd_set_scb_probe: GET max_scb_probe failed [ 55.085817@1] dhd_set_scb_probe: max_scb_probe setting failed [ 55.085953@1] dhd_open: Exit ret=0 [ 56.771760@1] IEC958 16bit [ 56.771772@1] hdmitx: audio: aout notify rate 48000 [ 56.771776@1] hdmitx: audio: aout notify size 16 [ 56.771779@1] hdmitx: audio: no update [ 56.771784@1] aml_i2s_close device type 8 [ 56.786296@1] IEC958 16bit [ 56.786307@1] hdmitx: audio: aout notify rate 48000 [ 56.786310@1] hdmitx: audio: aout notify size 16 [ 56.786314@1] hdmitx: audio: no update [ 56.786318@1] aml_i2s_close device type 8 [ 56.787562@1] IEC958 16bit [ 56.787570@1] hdmitx: audio: aout notify rate 48000 [ 56.787573@1] hdmitx: audio: aout notify size 16 [ 56.787576@1] hdmitx: audio: no update [ 56.787580@1] aml_i2s_close device type 8 [ 56.788718@1] IEC958 16bit [ 56.788725@1] hdmitx: audio: aout notify rate 48000 [ 56.788728@1] hdmitx: audio: aout notify size 16 [ 56.788731@1] hdmitx: audio: no update [ 56.788735@1] aml_i2s_close device type 8 [ 56.789587@1] IEC958 16bit [ 56.789594@1] hdmitx: audio: aout notify rate 48000 [ 56.789597@1] hdmitx: audio: aout notify size 16 [ 56.789600@1] hdmitx: audio: no update [ 56.789604@1] aml_i2s_close device type 8 [ 56.790717@1] IEC958 16bit [ 56.790724@1] hdmitx: audio: aout notify rate 48000 [ 56.790727@1] hdmitx: audio: aout notify size 16 [ 56.790730@1] hdmitx: audio: no update [ 56.790733@1] aml_i2s_close device type 8 [ 56.791845@1] IEC958 16bit [ 56.791851@1] hdmitx: audio: aout notify rate 48000 [ 56.791854@1] hdmitx: audio: aout notify size 16 [ 56.791857@1] hdmitx: audio: no update [ 56.791860@1] aml_i2s_close device type 8 [ 56.792412@1] IEC958 16bit [ 56.792417@1] hdmitx: audio: aout notify rate 48000 [ 56.792421@1] hdmitx: audio: aout notify size 16 [ 56.792423@1] hdmitx: audio: no update [ 56.792427@1] aml_i2s_close device type 8 [ 56.793480@1] IEC958 16bit [ 56.793486@1] hdmitx: audio: aout notify rate 48000 [ 56.793489@1] hdmitx: audio: aout notify size 16 [ 56.793492@1] hdmitx: audio: no update [ 56.793496@1] aml_i2s_close device type 8 [ 56.794590@1] IEC958 16bit [ 56.794596@1] hdmitx: audio: aout notify rate 48000 [ 56.794599@1] hdmitx: audio: aout notify size 16 [ 56.794602@1] hdmitx: audio: no update [ 56.794606@1] aml_i2s_close device type 8 [ 56.795174@1] IEC958 16bit [ 56.795181@1] hdmitx: audio: aout notify rate 48000 [ 56.795184@1] hdmitx: audio: aout notify size 16 [ 56.795187@1] hdmitx: audio: no update [ 56.795191@1] aml_i2s_close device type 8 [ 56.799106@1] IEC958 16bit [ 56.799115@1] hdmitx: audio: aout notify rate 48000 [ 56.799118@1] hdmitx: audio: aout notify size 16 [ 56.799121@1] hdmitx: audio: no update [ 56.799126@1] aml_i2s_close device type 8 [ 56.800318@1] IEC958 16bit [ 56.800325@1] hdmitx: audio: aout notify rate 48000 [ 56.800329@1] hdmitx: audio: aout notify size 16 [ 56.800332@1] hdmitx: audio: no update [ 56.800336@1] aml_i2s_close device type 8 [ 56.800997@1] IEC958 16bit [ 56.801003@1] hdmitx: audio: aout notify rate 48000 [ 56.801006@1] hdmitx: audio: aout notify size 16 [ 56.801009@1] hdmitx: audio: no update [ 56.801013@1] aml_i2s_close device type 8 [ 56.801785@1] IEC958 16bit [ 56.801792@1] hdmitx: audio: aout notify rate 48000 [ 56.801796@1] hdmitx: audio: aout notify size 16 [ 56.801798@1] hdmitx: audio: no update [ 56.801802@1] aml_i2s_close device type 2 [ 56.806485@3] buf=0 [ 56.806493@3] IEC958_mode_raw=0 [ 56.806533@3] IEC958_mode_codec= 0,IEC958 type 2 CH PCM [ 56.806537@3] last mode 0,now 0 [ 56.810573@3] IEC958 16bit [ 56.810582@3] hdmitx: audio: aout notify rate 48000 [ 56.810585@3] hdmitx: audio: aout notify size 16 [ 56.810588@3] hdmitx: audio: no update [ 56.810593@3] aml_i2s_close device type 8 [ 56.811886@3] IEC958 16bit [ 56.811893@3] hdmitx: audio: aout notify rate 48000 [ 56.811897@3] hdmitx: audio: aout notify size 16 [ 56.811899@3] hdmitx: audio: no update [ 56.811903@3] aml_i2s_close device type 8 [ 56.813706@3] enter aml_asoc_hw_params stream: playback rate: 44100 format: 2 [ 56.813948@3] [aml-i2s-dai]enterd aml_dai_i2s_prepare,old_samplerate:48000,sample_rate=44100 [ 56.813960@3] [aml-i2s-dai]i2s dma f071c000,phy addr 2e300000,mode 0,ch 2 [ 56.813963@3] ----aml_hw_iec958_init,runtime->rate=44100-- [ 56.813968@3] [aml-spdif-dai]enterd aml_hw_iec958_init,set_clock:4,sample_rate=5 [ 56.813971@3] audio_set_958_clk, freq=5, [ 56.813975@3] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5-- [ 56.813979@3] iec958 mode PCM16 [ 56.813983@3] IEC958 16bit [ 56.813987@3] hdmitx: audio: aout notify rate 44100 [ 56.813990@3] hdmitx: audio: aout notify size 16 [ 56.813994@3] hdmitx: audio: audio channel num is 1 [ 56.814005@3] hdmitx: audio: SPDIF [ 56.814016@3] hdmitx: audio: current VIC: 4 [ 56.814018@3] hdmitx: audio: audio sample rate: 2 [ 56.814021@3] hdmitx: audio: set audio N para [ 56.814028@3] hdmitx: audio: PCM out to HDMI [ 56.814032@3] hdmitx: audio: i2s_to_spdif_flag:1 [ 56.814034@3] hdmitx: audio: Enable audio spdif to HDMI [ 56.814040@3] hdmitx: audio: Audio Type: PCM [ 56.814081@3] hdmitx: audio: set audio param [ 56.814085@3] [aml-spdif-dai]spdif dma f071c000,phy addr 2e300000 [ 56.814143@3] speaker_events--mute =1 [ 56.815253@0] [aml-i2s-dai]i2s dma f071c000,phy addr 2e300000,mode 0,ch 2 [ 56.815260@0] ----aml_hw_iec958_init,runtime->rate=44100-- [ 56.815264@0] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5-- [ 56.815268@0] iec958 mode PCM16 [ 56.815273@0] IEC958 16bit [ 56.815277@0] hdmitx: audio: aout notify rate 44100 [ 56.815283@0] hdmitx: audio: aout notify size 16 [ 56.815286@0] hdmitx: audio: no update [ 56.815290@0] [aml-spdif-dai]spdif dma f071c000,phy addr 2e300000 [ 56.817708@0] [aml-i2s-dai]aiu i2s playback enable [ 56.817708@0] [ 56.817719@0] [aml-i2s-dai]audio_hw_958_enable 1 [ 58.595362@3] Changing uart_a_ttyS1: baud from 115200 to 2000000 [ 58.726756@1] Bluetooth: Core ver 2.16 [ 58.726873@1] NET: Registered protocol family 31 [ 58.726879@1] Bluetooth: HCI device and connection manager initialized [ 58.726904@1] Bluetooth: HCI socket layer initialized [ 58.726911@1] Bluetooth: L2CAP socket layer initialized [ 58.726926@1] Bluetooth: SCO socket layer initialized [ 58.731903@1] Bluetooth: HCI UART driver ver 2.2 [ 58.731916@1] Bluetooth: HCI H4 protocol initialized [ 58.731920@1] Bluetooth: HCI Realtek H5 protocol initialized [ 58.731924@1] rtk_btcoex: rtk_uart_coex_init, version: 1.1 [ 58.731926@1] rtk_btcoex: create workqueue [ 58.732452@1] Bluetooth: hci_uart_register_dev [ 58.733182@1] rtk_btcoex: create udpsocket, connect_port: 30001 [ 58.733210@1] rtk_btcoex: send msg INVITE_REQ with len:11 [ 58.740894@0] rtk_btcoex: uart_coex_info.hci_reversion = 1000 [ 58.740905@0] rtk_btcoex: uart_coex_info.lmp_subversion = 4103 [ 59.251012@3] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 59.251029@3] Bluetooth: BNEP filters: protocol multicast [ 59.251058@3] Bluetooth: BNEP socket layer initialized [ 64.429005@0] hdmitx: cec: enable:int mask:0x6 [ 64.429858@0] hdmitx: cec: enable:int mask:0x6 [ 108.386231@1] Connectting with 90:f6:52:f5:b7:0a channel (6) ssid "Dante2", len (6) [ 108.386231@1] [ 108.759115@0] wl_iw_event: Link UP with BSSID=90:F6:00:00:B7:0A [ 108.759147@1] wl_bss_connect_done succeeded with 90:f6:52:f5:b7:0a [ 108.816897@1] wl_bss_connect_done succeeded with 90:f6:52:f5:b7:0a [ 131.825225@0] [aml-i2s-dai]aiu i2s playback disable [ 131.825225@0] [ 131.825310@0] [aml-i2s-dai]audio_hw_958_enable 0 [ 131.825789@2] [aml-i2s-dai]i2s dma f071c000,phy addr 2e300000,mode 0,ch 2 [ 131.825874@2] ----aml_hw_iec958_init,runtime->rate=44100-- [ 131.825942@2] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5-- [ 131.826002@2] iec958 mode PCM16 [ 131.826064@2] IEC958 16bit [ 131.826122@2] hdmitx: audio: aout notify rate 44100 [ 131.826173@2] hdmitx: audio: aout notify size 16 [ 131.826311@2] hdmitx: audio: no update [ 131.826374@2] [aml-spdif-dai]spdif dma f071c000,phy addr 2e300000 [ 141.827701@2] [aml-spdif-dai]enterd aml_spdif_play,set_clock:5,sample_rate=4 [ 141.827742@2] audio_set_958_clk, freq=4, [ 141.827784@2] IEC958 16bit [ 141.827812@2] hdmitx: audio: aout notify rate 48000 [ 141.827836@2] hdmitx: audio: aout notify size 16 [ 141.827864@2] hdmitx: audio: audio channel num is 1 [ 141.827897@2] hdmitx: audio: SPDIF [ 141.827944@2] hdmitx: audio: current VIC: 4 [ 141.827965@2] hdmitx: audio: audio sample rate: 3 [ 141.827986@2] hdmitx: audio: set audio N para [ 141.828021@2] hdmitx: audio: PCM out to HDMI [ 141.828042@2] hdmitx: audio: i2s_to_spdif_flag:1 [ 141.828061@2] hdmitx: audio: Enable audio spdif to HDMI [ 141.828093@2] hdmitx: audio: Audio Type: PCM [ 141.828241@2] hdmitx: audio: set audio param [ 141.828272@2] aml_i2s_close device type 8 [ 146.835161@2] speaker_events--mute =0 LibreELEC:~ #