################################################################################ # ... output of dmesg # LibreELEC release: RPi4.arm-9.95.1 # ################################################################################ [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.17 (jenkins@tsuboi) (armv8a-libreelec-linux-gnueabihf-gcc-10.2.0 (GCC) 10.2.0, GNU ld (GNU Binutils) 2.35.1) #1 SMP Thu Mar 11 14:06:58 CET 2021 [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Reserved memory: created CMA memory pool at 0x000000000ec00000, size 512 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] On node 0 totalpages: 504832 [ 0.000000] DMA zone: 2304 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:63 [ 0.000000] HighMem zone: 308224 pages, LIFO batch:63 [ 0.000000] percpu: Embedded 20 pages/cpu s51788 r8192 d21940 u81920 [ 0.000000] pcpu-alloc: s51788 r8192 d21940 u81920 alloc=20*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 502528 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=DC:A6:32:05:E2:87 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 boot=UUID=1103-0809 disk=UUID=9ee2217f-7b96-4eee-8977-167cca3a35d6 quiet root=/dev/ram0 rdinit=/init usbcore.autosuspend=-1 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x0000000009400000-0x000000000d400000] (64MB) [ 0.000000] Memory: 1378604K/2019328K available (12288K kernel code, 1372K rwdata, 2664K rodata, 6144K init, 602K bss, 116436K reserved, 524288K cma-reserved, 1232896K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 36486 entries in 72 pages [ 0.000000] ftrace: allocated 72 pages with 2 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 25) [ 0.000000] random: get_random_bytes called from start_kernel+0x668/0x840 with crng_init=0 [ 0.000010] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000029] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000090] bcm2835: system timer (irq = 26) [ 0.000688] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000705] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000723] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000738] Switching to timer-based delay loop, resolution 18ns [ 0.001002] Console: colour dummy device 80x30 [ 0.001070] printk: console [tty0] enabled [ 0.001126] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.50 BogoMIPS (lpj=180000) [ 0.001158] pid_max: default: 32768 minimum: 301 [ 0.001379] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.001404] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.002957] Disabling memory control group subsystem [ 0.003006] CPU: Testing write buffer coherency: ok [ 0.003463] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.004583] Setting up static identity map for 0x200000 - 0x20003c [ 0.004762] rcu: Hierarchical SRCU implementation. [ 0.006078] smp: Bringing up secondary CPUs ... [ 0.007250] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.008597] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.009811] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.009955] smp: Brought up 1 node, 4 CPUs [ 0.009976] SMP: Total of 4 processors activated (432.00 BogoMIPS). [ 0.009994] CPU: All CPU(s) started in HYP mode. [ 0.010008] CPU: Virtualization extensions available. [ 0.010756] devtmpfs: initialized [ 0.024432] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0 [ 0.024660] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.024690] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.039308] pinctrl core: initialized pinctrl subsystem [ 0.040524] NET: Registered protocol family 16 [ 0.044361] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.045733] thermal_sys: Registered thermal governor 'step_wise' [ 0.045974] cpuidle: using governor ladder [ 0.046026] cpuidle: using governor menu [ 0.046311] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.046328] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.046718] Serial: AMBA PL011 UART driver [ 0.090424] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 0.097846] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-02-25T12:11:39, variant start_x [ 0.101192] raspberrypi-firmware soc:firmware: Firmware hash is 564e5f9b852b23a330b1764bcf0b2d022a20afd0 [ 0.145834] vgaarb: loaded [ 0.146246] SCSI subsystem initialized [ 0.146479] usbcore: registered new interface driver usbfs [ 0.146538] usbcore: registered new interface driver hub [ 0.146611] usbcore: registered new device driver usb [ 0.147336] Advanced Linux Sound Architecture Driver Initialized. [ 0.148380] clocksource: Switched to clocksource arch_sys_counter [ 1.112417] FS-Cache: Loaded [ 1.122284] NET: Registered protocol family 2 [ 1.123321] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.123364] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.123431] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.123505] TCP: Hash tables configured (established 8192 bind 8192) [ 1.123673] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.123713] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.123969] NET: Registered protocol family 1 [ 1.124675] RPC: Registered named UNIX socket transport module. [ 1.124690] RPC: Registered udp transport module. [ 1.124705] RPC: Registered tcp transport module. [ 1.124720] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.124745] PCI: CLS 0 bytes, default 64 [ 1.148225] Initialise system trusted keyrings [ 1.148476] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 1.157966] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.158720] FS-Cache: Netfs 'nfs' registered for caching [ 1.159588] NFS: Registering the id_resolver key type [ 1.159624] Key type id_resolver registered [ 1.159639] Key type id_legacy registered [ 1.159787] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.160468] FS-Cache: Netfs 'cifs' registered for caching [ 1.160905] Key type cifs.idmap registered [ 1.268344] NET: Registered protocol family 38 [ 1.268401] Key type asymmetric registered [ 1.268416] Asymmetric key parser 'x509' registered [ 1.268613] bounce: pool size: 64 pages [ 1.268662] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.268680] io scheduler mq-deadline registered [ 1.268696] io scheduler kyber registered [ 1.268843] io scheduler bfq registered [ 1.273591] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 1.273624] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] [ 1.273703] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000 [ 1.273791] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x007fffffff -> 0x0400000000 [ 1.313815] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) [ 1.314113] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [ 1.314133] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.314154] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff]) [ 1.314243] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [ 1.314486] pci 0000:00:00.0: PME# supported from D0 D3hot [ 1.317761] PCI: bus0: Fast back to back transfers disabled [ 1.318141] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [ 1.318270] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 1.318751] pci 0000:01:00.0: PME# supported from D0 D3cold [ 1.321961] PCI: bus1: Fast back to back transfers disabled [ 1.322024] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [ 1.322047] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [ 1.322131] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.322157] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [ 1.322559] pcieport 0000:00:00.0: enabling device (0140 -> 0142) [ 1.322786] pcieport 0000:00:00.0: PME: Signaling with IRQ 80 [ 1.323175] pcieport 0000:00:00.0: AER: enabled with IRQ 80 [ 1.332227] iproc-rng200 fe104000.rng: hwrng registered [ 1.332579] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 1.356492] brd: module loaded [ 1.356639] loop: module loaded [ 1.381775] usbcore: registered new interface driver rtsx_usb [ 1.383545] Loading iSCSI transport class v2.0-870. [ 1.384247] iscsi: registered transport (tcp) [ 1.386211] libphy: Fixed MDIO Bus: probed [ 1.386835] tun: Universal TUN/TAP device driver, 1.6 [ 1.387787] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [ 1.401746] libphy: bcmgenet MII bus: probed [ 1.455231] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [ 1.456399] usbcore: registered new interface driver lan78xx [ 1.456454] usbcore: registered new interface driver dm9601 [ 1.456531] usbcore: registered new interface driver smsc95xx [ 1.458196] xhci_hcd 0000:01:00.0: enabling device (0140 -> 0142) [ 1.458373] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.458413] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 1.461974] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000030000000890 [ 1.463239] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 1.463259] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.463276] usb usb1: Product: xHCI Host Controller [ 1.463292] usb usb1: Manufacturer: Linux 5.10.17 xhci-hcd [ 1.463307] usb usb1: SerialNumber: 0000:01:00.0 [ 1.464042] hub 1-0:1.0: USB hub found [ 1.464149] hub 1-0:1.0: 1 port detected [ 1.464830] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.464858] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 1.464885] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 1.465425] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 1.465444] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.465462] usb usb2: Product: xHCI Host Controller [ 1.465478] usb usb2: Manufacturer: Linux 5.10.17 xhci-hcd [ 1.465493] usb usb2: SerialNumber: 0000:01:00.0 [ 1.466194] hub 2-0:1.0: USB hub found [ 1.466278] hub 2-0:1.0: 4 ports detected [ 1.468046] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 1.468416] dwc_otg: FIQ enabled [ 1.468430] dwc_otg: NAK holdoff enabled [ 1.468444] dwc_otg: FIQ split-transaction FSM enabled [ 1.468462] Module dwc_common_port init [ 1.468873] usbcore: registered new interface driver uas [ 1.468982] usbcore: registered new interface driver usb-storage [ 1.469175] mousedev: PS/2 mouse device common for all mice [ 1.469574] i2c /dev entries driver [ 1.470733] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode [ 1.471384] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode [ 1.474704] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 1.478626] sdhci: Secure Digital Host Controller Interface driver [ 1.478643] sdhci: Copyright(c) Pierre Ossman [ 1.479433] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe [ 1.480112] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.483430] ledtrig-cpu: registered to indicate activity on CPUs [ 1.483582] hid: raw HID events driver (C) Jiri Kosina [ 1.484852] usbcore: registered new interface driver usbhid [ 1.484859] usbhid: USB HID core driver [ 1.487472] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 1.487484] [vc_sm_connected_init]: start [ 1.791773] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 1.934383] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 [ 1.934403] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.934420] usb 1-1: Product: USB2.0 Hub [ 1.936301] hub 1-1:1.0: USB hub found [ 1.936627] hub 1-1:1.0: 4 ports detected [ 2.225089] usb 1-1.4: new full-speed USB device number 3 using xhci_hcd [ 2.323435] usb 1-1.4: New USB device found, idVendor=400c, idProduct=107a, bcdDevice=10.01 [ 2.323455] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.323471] usb 1-1.4: Product: SAGE AirMouse [ 2.323488] usb 1-1.4: Manufacturer: SAGE [ 2.323505] usb 1-1.4: SerialNumber: ᥚ婩熦廖 [ 2.335159] input: SAGE SAGE AirMouse Keyboard as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:400C:107A.0001/input/input0 [ 2.392527] hid-generic 0003:400C:107A.0001: input,hiddev96,hidraw0: USB HID v1.01 Keyboard [SAGE SAGE AirMouse] on usb-0000:01:00.0-1.4/input0 [ 2.401724] input: SAGE SAGE AirMouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:400C:107A.0002/input/input2 [ 2.402138] input: SAGE SAGE AirMouse System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:400C:107A.0002/input/input3 [ 2.458618] input: SAGE SAGE AirMouse Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:400C:107A.0002/input/input4 [ 2.458922] hid-generic 0003:400C:107A.0002: input,hiddev97,hidraw1: USB HID v1.01 Mouse [SAGE SAGE AirMouse] on usb-0000:01:00.0-1.4/input1 [ 2.691038] [vc_sm_connected_init]: installed successfully [ 2.693136] NET: Registered protocol family 10 [ 2.694302] Segment Routing with IPv6 [ 2.694390] NET: Registered protocol family 17 [ 2.694501] Key type dns_resolver registered [ 2.694625] Registering SWP/SWPB emulation handler [ 2.694922] Loading compiled-in X.509 certificates [ 2.706188] uart-pl011 fe201000.serial: there is not valid maps for state default [ 2.706501] uart-pl011 fe201000.serial: cts_event_workaround enabled [ 2.706583] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 38, base_baud = 0) is a PL011 rev2 [ 2.721771] debugfs: Directory 'fef00700.hdmi' with parent 'vc4-hdmi-0' already present! [ 2.723530] vc4-drm gpu: bound fef00700.hdmi (ops 0xc0e64f88) [ 2.725409] debugfs: Directory 'fef05700.hdmi' with parent 'vc4-hdmi-1' already present! [ 2.726050] vc4-drm gpu: bound fef05700.hdmi (ops 0xc0e64f88) [ 2.726182] vc4-drm gpu: bound fe400000.hvs (ops 0xc0e66c04) [ 2.726320] vc4-drm gpu: bound fe004000.txp (ops 0xc0e671e0) [ 2.726433] vc4-drm gpu: bound fe206000.pixelvalve (ops 0xc0e62f80) [ 2.726558] vc4-drm gpu: bound fe207000.pixelvalve (ops 0xc0e62f80) [ 2.726679] vc4-drm gpu: bound fe20a000.pixelvalve (ops 0xc0e62f80) [ 2.726764] vc4-drm gpu: bound fe216000.pixelvalve (ops 0xc0e62f80) [ 2.726891] vc4-drm gpu: bound fec12000.pixelvalve (ops 0xc0e62f80) [ 2.748402] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 0 [ 2.824748] Console: switching to colour frame buffer device 240x67 [ 2.850176] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device [ 2.851940] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 2.852485] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 2.852492] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [ 2.892821] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 1 [ 2.895714] printk: console [netcon0] enabled [ 2.895721] netconsole: network logging started [ 2.895727] of_cfs_init [ 2.895740] of_cfs_init: OK [ 2.895999] ALSA device list: [ 2.896006] #0: vc4-hdmi-0 [ 2.896013] #1: vc4-hdmi-1 [ 2.907859] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 2.909420] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 2.910984] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 2.911920] random: fast init done [ 2.913924] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.915581] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 2.922274] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA [ 2.934304] Freeing unused kernel memory: 6144K [ 2.934511] Run /init as init process [ 2.934520] with arguments: [ 2.934528] /init [ 2.934535] with environment: [ 2.934542] HOME=/ [ 2.934549] TERM=linux [ 2.934556] boot=UUID=1103-0809 [ 2.934564] disk=UUID=9ee2217f-7b96-4eee-8977-167cca3a35d6 [ 2.984069] mmc1: new high speed SDIO card at address 0001 [ 3.000986] Checking disk(s): UUID=1103-0809 UUID=9ee2217f-7b96-4eee-8977-167cca3a35d6 [ 3.030407] mmc0: new ultra high speed DDR50 SDHC card at address 0007 [ 3.030856] mmcblk0: mmc0:0007 SD16G 14.5 GiB [ 3.032144] mmcblk0: p1 p2 [ 9.954903] fsck: CP437: Invalid argument [ 9.955274] fsck: fsck.fat 4.1 (2017-01-24) [ 9.955779] fsck: /dev/mmcblk0p1: 247 files, 15769/65501 clusters [ 9.956120] fsck: STORAGE: recovering journal [ 9.956710] fsck: STORAGE: clean, 2691/3657728 files, 587268/14630912 blocks [ 10.694759] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 11.064147] kernel-overlays-setup: setup base modules [ 11.124067] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/5.10.17 [ 11.162528] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware [ 11.164913] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays [ 11.168032] kernel-overlays-setup: done [ 11.503620] systemd[1]: System time before build time, advancing clock. [ 11.601466] systemd[1]: systemd 247.3 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -ZSTD -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid) [ 11.601868] systemd[1]: Detected architecture arm. [ 11.626377] systemd[1]: Set hostname to . [ 11.804434] systemd[1]: Queued start job for default target Kodi Mediacenter Interface. [ 11.804986] random: systemd: uninitialized urandom read (16 bytes read) [ 11.820071] systemd[1]: Created slice system-modprobe.slice. [ 11.820212] random: systemd: uninitialized urandom read (16 bytes read) [ 11.820629] systemd[1]: Created slice User and Session Slice. [ 11.820692] random: systemd: uninitialized urandom read (16 bytes read) [ 11.820831] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 11.820987] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 11.821168] systemd[1]: Reached target Paths. [ 11.821248] systemd[1]: Reached target Slices. [ 11.833560] systemd[1]: Listening on RPCbind Server Activation Socket. [ 11.833737] systemd[1]: Reached target RPC Port Mapper. [ 11.834035] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 11.838266] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 11.839563] systemd[1]: Listening on Journal Socket (/dev/log). [ 11.840078] systemd[1]: Listening on Journal Socket. [ 11.841928] systemd[1]: Listening on udev Control Socket. [ 11.842354] systemd[1]: Listening on udev Kernel Socket. [ 11.842705] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 11.845072] systemd[1]: Mounting POSIX Message Queue File System... [ 11.847986] systemd[1]: Mounting Kernel Debug File System... [ 11.850990] systemd[1]: Mounting Kernel Trace File System... [ 11.853710] systemd[1]: Mounting Variable Directory... [ 11.856777] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 11.859383] systemd[1]: Starting Setup machine-id... [ 11.861872] systemd[1]: Starting Load Kernel Module configfs... [ 11.864333] systemd[1]: Starting Load Kernel Module drm... [ 11.866892] systemd[1]: Starting Load Kernel Module fuse... [ 11.869866] systemd[1]: Starting Show Version... [ 11.872380] systemd[1]: Starting Create Persistent Log Directory on /storage... [ 11.874554] systemd[1]: Starting Mounting swapfile... [ 11.918180] fuse: init (API version 7.32) [ 11.922179] systemd[1]: Starting Load Kernel Modules... [ 11.926048] systemd[1]: Starting Setup NTP servers for timesyncd... [ 11.929139] systemd[1]: Starting Coldplug All udev Devices... [ 11.933231] systemd[1]: Starting Wait for Kernel Time Synchronisation... [ 11.941152] systemd[1]: Mounted POSIX Message Queue File System. [ 11.941476] systemd[1]: Mounted Kernel Debug File System. [ 11.941851] systemd[1]: Mounted Kernel Trace File System. [ 11.942389] systemd[1]: Mounted Variable Directory. [ 11.944348] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 11.945290] systemd[1]: Finished Setup machine-id. [ 11.945895] systemd[1]: modprobe@configfs.service: Succeeded. [ 11.946480] systemd[1]: Finished Load Kernel Module configfs. [ 11.947073] systemd[1]: modprobe@drm.service: Succeeded. [ 11.947660] systemd[1]: Finished Load Kernel Module drm. [ 11.948243] systemd[1]: modprobe@fuse.service: Succeeded. [ 11.948852] systemd[1]: Finished Load Kernel Module fuse. [ 11.949801] systemd[1]: Finished Show Version. [ 11.950730] systemd[1]: Finished Create Persistent Log Directory on /storage. [ 11.953115] systemd[1]: Mounting FUSE Control File System... [ 11.955483] systemd[1]: Mounting Kernel Configuration File System... [ 11.955963] systemd[1]: Condition check resulted in Persistent Log Storage being skipped. [ 11.961240] systemd[1]: Starting Journal Service... [ 11.965103] systemd[1]: Starting Create Static Device Nodes in /dev... [ 12.315696] systemd[1]: Finished Load Kernel Modules. [ 12.316285] systemd[1]: Mounted FUSE Control File System. [ 12.316643] systemd[1]: Mounted Kernel Configuration File System. [ 12.319747] systemd[1]: Starting Apply Kernel Variables... [ 12.336898] systemd[1]: Finished Setup NTP servers for timesyncd. [ 12.371272] systemd[1]: Finished Apply Kernel Variables. [ 12.383947] systemd[1]: Started Journal Service. [ 12.421679] systemd-journald[248]: Received client request to flush runtime journal. [ 13.386672] random: crng init done [ 13.386683] random: 7 urandom warning(s) missed due to ratelimiting [ 13.884729] mc: Linux media interface: v0.10 [ 13.975082] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 [ 14.013297] videodev: Linux video capture interface: v2.00 [ 14.133870] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 14.187210] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 14.188477] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 14.188495] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 14.188910] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned. [ 14.189278] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [ 14.194344] rpivid feb10000.codec: Device registered as /dev/video19 [ 14.210852] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [ 14.211281] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [ 14.211514] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [ 14.211746] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [ 14.211764] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 14.211777] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 14.211794] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 14.211804] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 14.211907] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [ 14.230164] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 14.230194] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 14.235334] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 14.235339] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 14.235369] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 14.249781] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 14.249808] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 14.314545] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 14.322113] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 14.323329] usbcore: registered new interface driver brcmfmac [ 14.404341] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt failed with error -2 [ 14.730679] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 14.749066] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jan 4 2021 19:56:29 version 7.45.229 (617f1f5 CY) FWID 01-2dbd9d2e [ 14.947902] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) [ 14.948537] bcmgenet fd580000.ethernet eth0: Link is Down [ 15.202463] uart-pl011 fe201000.serial: no DMA platform data [ 19.011868] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 19.011897] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 19.344730] 8021q: 802.1Q VLAN Support v1.8 [ 21.077201] vc4_hdmi fef00700.hdmi: ASoC: error at snd_soc_dai_startup on fef00700.hdmi: -19 [ 21.094377] vc4_hdmi fef00700.hdmi: ASoC: error at snd_soc_dai_startup on fef00700.hdmi: -19 [ 21.095151] vc4_hdmi fef00700.hdmi: ASoC: error at snd_soc_dai_startup on fef00700.hdmi: -19 [ 21.095631] vc4_hdmi fef00700.hdmi: ASoC: error at snd_soc_dai_startup on fef00700.hdmi: -19 [ 21.096484] vc4_hdmi fef05700.hdmi: ASoC: error at snd_soc_dai_startup on fef05700.hdmi: -19 [ 21.097026] vc4_hdmi fef05700.hdmi: ASoC: error at snd_soc_dai_startup on fef05700.hdmi: -19 [ 21.916625] Bluetooth: Core ver 2.22 [ 21.916725] NET: Registered protocol family 31 [ 21.916732] Bluetooth: HCI device and connection manager initialized [ 21.916754] Bluetooth: HCI socket layer initialized [ 21.916765] Bluetooth: L2CAP socket layer initialized [ 21.916786] Bluetooth: SCO socket layer initialized [ 21.919854] Bluetooth: HCI UART driver ver 2.3 [ 21.919868] Bluetooth: HCI UART protocol H4 registered [ 21.919937] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 21.920109] Bluetooth: HCI UART protocol Broadcom registered [ 657.824931] usb 1-1.1: new low-speed USB device number 4 using xhci_hcd [ 657.937391] usb 1-1.1: New USB device found, idVendor=0ede, idProduct=0107, bcdDevice= 0.01 [ 657.937406] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 657.937418] usb 1-1.1: Product: Cypress USB Keyboard / PS2 Mouse [ 657.937429] usb 1-1.1: Manufacturer: Cypress [ 657.965393] input: Cypress Cypress USB Keyboard / PS2 Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0EDE:0107.0003/input/input7 [ 658.022521] hid-generic 0003:0EDE:0107.0003: input,hidraw2: USB HID v1.00 Keyboard [Cypress Cypress USB Keyboard / PS2 Mouse] on usb-0000:01:00.0-1.1/input0 [ 658.035684] input: Cypress Cypress USB Keyboard / PS2 Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0EDE:0107.0004/input/input8 [ 658.036213] input: Cypress Cypress USB Keyboard / PS2 Mouse System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0EDE:0107.0004/input/input9 [ 658.091927] input: Cypress Cypress USB Keyboard / PS2 Mouse Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0EDE:0107.0004/input/input10 [ 658.092170] hid-generic 0003:0EDE:0107.0004: input,hidraw3: USB HID v1.00 Mouse [Cypress Cypress USB Keyboard / PS2 Mouse] on usb-0000:01:00.0-1.1/input1 [ 1146.136592] vc4-drm gpu: [drm] HDMI-A-1: EDID is invalid: [ 1146.136611] [00] BAD 00 ff ff ff ff ff ff 00 41 0c 00 00 01 01 01 01 [ 1146.136623] [00] BAD 01 12 01 03 80 40 24 78 0a e6 92 a3 54 4a 99 26 [ 1146.136634] [00] BAD 0f 4a 4c 21 08 3f ff ff ff ff ff ff ff ff ff ff [ 1146.136645] [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1146.136656] [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1146.136667] [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1146.136677] [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1146.136688] [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1817.203556] usb 1-1.1: USB disconnect, device number 4 [ 1820.223966] usb 1-1.1: new full-speed USB device number 5 using xhci_hcd [ 1820.378227] usb 1-1.1: New USB device found, idVendor=1532, idProduct=051e, bcdDevice= 1.00 [ 1820.378244] usb 1-1.1: New USB device strings: Mfr=3, Product=4, SerialNumber=0 [ 1820.378257] usb 1-1.1: Product: Razer Nari Essential [ 1820.378270] usb 1-1.1: Manufacturer: Razer [ 1820.461629] input: Razer Razer Nari Essential Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.3/0003:1532:051E.0005/input/input11 [ 1820.517590] input: Razer Razer Nari Essential as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.3/0003:1532:051E.0005/input/input12 [ 1820.517827] input: Razer Razer Nari Essential as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.3/0003:1532:051E.0005/input/input13 [ 1820.518185] hid-generic 0003:1532:051E.0005: input,hiddev98,hidraw2: USB HID v1.11 Device [Razer Razer Nari Essential] on usb-0000:01:00.0-1.1/input3 [ 1820.690886] usbcore: registered new interface driver snd-usb-audio [ 1820.958011] vc4_hdmi fef00700.hdmi: ASoC: error at snd_soc_dai_startup on fef00700.hdmi: -19 [ 1821.012608] vc4_hdmi fef00700.hdmi: ASoC: error at snd_soc_dai_startup on fef00700.hdmi: -19 [ 1821.013577] vc4_hdmi fef00700.hdmi: ASoC: error at snd_soc_dai_startup on fef00700.hdmi: -19 [ 1821.014583] vc4_hdmi fef00700.hdmi: ASoC: error at snd_soc_dai_startup on fef00700.hdmi: -19 [ 1821.015699] vc4_hdmi fef05700.hdmi: ASoC: error at snd_soc_dai_startup on fef05700.hdmi: -19 [ 1821.016404] vc4_hdmi fef05700.hdmi: ASoC: error at snd_soc_dai_startup on fef05700.hdmi: -19 [ 1869.954240] cryptd: max_cpu_qlen set to 1000 [ 1981.525518] v3d fec00000.v3d: MMU error from client CLE (4) at 0x39c1000, pte invalid [ 8784.753814] usb 1-1.1: USB disconnect, device number 5 [ 8784.886696] vc4_hdmi fef00700.hdmi: ASoC: error at snd_soc_dai_startup on fef00700.hdmi: -19 [ 8784.913735] vc4_hdmi fef00700.hdmi: ASoC: error at snd_soc_dai_startup on fef00700.hdmi: -19 [ 8784.915911] vc4_hdmi fef00700.hdmi: ASoC: error at snd_soc_dai_startup on fef00700.hdmi: -19 [ 8784.916727] vc4_hdmi fef00700.hdmi: ASoC: error at snd_soc_dai_startup on fef00700.hdmi: -19 [ 8784.920014] vc4_hdmi fef05700.hdmi: ASoC: error at snd_soc_dai_startup on fef05700.hdmi: -19 [ 8784.920983] vc4_hdmi fef05700.hdmi: ASoC: error at snd_soc_dai_startup on fef05700.hdmi: -19 [ 8785.087943] usb 1-1.1: new full-speed USB device number 6 using xhci_hcd [ 8785.161748] usb 1-1.1: Device not responding to setup address. [ 8785.368177] usb 1-1.1: Device not responding to setup address. [ 8785.577943] usb 1-1.1: device not accepting address 6, error -71 ################################################################################ # ... output of lsmod # LibreELEC release: RPi4.arm-9.95.1 # ################################################################################ Module Size Used by aes_arm_bs 24576 2 crypto_simd 16384 1 aes_arm_bs cryptd 20480 2 crypto_simd snd_usb_audio 212992 0 snd_usbmidi_lib 32768 1 snd_usb_audio snd_hwdep 16384 1 snd_usb_audio snd_rawmidi 32768 1 snd_usbmidi_lib hci_uart 49152 1 btbcm 16384 1 hci_uart bluetooth 495616 25 hci_uart,btbcm ecdh_generic 16384 2 bluetooth ecc 32768 1 ecdh_generic 8021q 28672 0 ip6table_mangle 16384 0 ip6table_nat 16384 0 ip6t_REJECT 16384 1 nf_reject_ipv6 20480 1 ip6t_REJECT ip6table_filter 16384 1 ip6_tables 28672 3 ip6table_mangle,ip6table_filter,ip6table_nat iptable_mangle 16384 0 iptable_nat 16384 0 nf_nat 40960 2 iptable_nat,ip6table_nat ipt_REJECT 16384 1 nf_reject_ipv4 16384 1 ipt_REJECT xt_conntrack 16384 30 nf_conntrack 86016 2 xt_conntrack,nf_nat nf_defrag_ipv6 24576 1 nf_conntrack nf_defrag_ipv4 16384 1 nf_conntrack iptable_filter 16384 1 ip_tables 28672 3 iptable_mangle,iptable_filter,iptable_nat x_tables 28672 9 ipt_REJECT,iptable_mangle,ip_tables,iptable_filter,ip6t_REJECT,ip6table_mangle,ip6table_filter,xt_conntrack,ip6_tables brcmfmac 286720 0 brcmutil 20480 1 brcmfmac bcm2835_isp 28672 0 rpivid_hevc 40960 0 bcm2835_codec 36864 1 bcm2835_mmal_vchiq 36864 2 bcm2835_isp,bcm2835_codec v4l2_mem2mem 24576 2 rpivid_hevc,bcm2835_codec videobuf2_dma_contig 24576 48 rpivid_hevc,bcm2835_isp,bcm2835_codec videobuf2_memops 20480 1 videobuf2_dma_contig videobuf2_v4l2 24576 4 rpivid_hevc,bcm2835_isp,bcm2835_codec,v4l2_mem2mem videobuf2_common 49152 5 rpivid_hevc,bcm2835_isp,bcm2835_codec,v4l2_mem2mem,videobuf2_v4l2 cfg80211 634880 1 brcmfmac videodev 196608 7 rpivid_hevc,bcm2835_isp,bcm2835_codec,videobuf2_common,v4l2_mem2mem,videobuf2_v4l2 rfkill 24576 4 bluetooth,cfg80211 bcm2835_gpiomem 16384 0 mc 45056 8 rpivid_hevc,bcm2835_isp,bcm2835_codec,snd_usb_audio,videobuf2_common,videodev,v4l2_mem2mem,videobuf2_v4l2 nvmem_rmem 16384 0 fuse 114688 1 ################################################################################ # ... output of ps xa # LibreELEC release: RPi4.arm-9.95.1 # ################################################################################ PID USER TIME COMMAND 1 root 0:02 /usr/lib/systemd/systemd 2 root 0:00 [kthreadd] 3 root 0:00 [rcu_gp] 4 root 0:00 [rcu_par_gp] 7 root 0:00 [kworker/u8:0-ev] 8 root 0:00 [mm_percpu_wq] 9 root 0:00 [rcu_tasks_rude_] 10 root 0:00 [rcu_tasks_trace] 11 root 0:09 [ksoftirqd/0] 12 root 0:26 [rcu_sched] 13 root 0:00 [migration/0] 14 root 0:00 [cpuhp/0] 15 root 0:00 [cpuhp/1] 16 root 0:00 [migration/1] 17 root 0:00 [ksoftirqd/1] 20 root 0:00 [cpuhp/2] 21 root 0:00 [migration/2] 22 root 0:01 [ksoftirqd/2] 25 root 0:00 [cpuhp/3] 26 root 0:00 [migration/3] 27 root 0:00 [ksoftirqd/3] 30 root 0:00 [kdevtmpfs] 31 root 0:00 [netns] 35 root 0:00 [oom_reaper] 36 root 0:00 [writeback] 37 root 0:03 [kcompactd0] 66 root 0:00 [kblockd] 67 root 0:00 [blkcg_punt_bio] 68 root 0:00 [watchdogd] 69 root 0:04 [kworker/0:1H-kb] 70 root 0:00 [rpciod] 72 root 0:00 [xprtiod] 77 root 0:00 [kswapd0] 78 root 0:00 [nfsiod] 79 root 0:00 [cifsiod] 80 root 0:00 [smb3decryptd] 81 root 0:00 [cifsfileinfoput] 82 root 0:00 [cifsoplockd] 84 root 0:00 [irq/80-aerdrv] 86 root 0:00 [iscsi_eh] 87 root 0:00 [iscsi_destroy] 88 root 0:00 [kworker/u8:1-ev] 90 root 0:00 [DWC Notificatio] 91 root 0:00 [uas] 93 root 0:15 [vchiq-slot/0] 94 root 0:01 [vchiq-recy/0] 95 root 0:00 [vchiq-sync/0] 97 root 0:00 [vchiq-keep/0] 98 root 0:00 [SMIO] 99 root 0:00 [ipv6_addrconf] 101 root 0:02 [cec-vc4] 102 root 0:00 [irq/54-vc4 hdmi] 103 root 0:01 [irq/53-vc4 hdmi] 104 root 0:00 [cec-vc4] 105 root 0:00 [irq/60-vc4 hdmi] 106 root 0:00 [irq/59-vc4 hdmi] 107 root 0:00 [card0-crtc0] 108 root 0:00 [card0-crtc1] 109 root 0:00 [card0-crtc2] 110 root 0:00 [card0-crtc3] 111 root 0:00 [card0-crtc4] 112 root 0:00 [card0-crtc5] 113 root 0:00 [sdhci] 114 root 0:00 [irq/66-mmc0] 115 root 0:21 [v3d_bin] 116 root 0:34 [v3d_render] 117 root 0:00 [v3d_tfu] 118 root 0:00 [v3d_csd] 119 root 0:00 [v3d_cache_clean] 146 root 0:00 [mmc_complete] 148 root 0:02 [kworker/2:1H-kb] 151 root 0:01 [kworker/1:1H-kb] 154 root 0:02 [kworker/3:1H-kb] 165 root 0:00 [loop0] 167 root 0:03 [jbd2/mmcblk0p2-] 168 root 0:00 [ext4-rsv-conver] 248 root 0:01 /usr/lib/systemd/systemd-journald 267 root 0:00 /usr/sbin/rpcbind -f 299 root 0:00 /usr/lib/systemd/systemd-udevd 305 root 0:00 /usr/sbin/connman-vpnd -n 315 dbus 0:00 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation --syslog-only 317 root 0:00 /usr/sbin/eventlircd -f --evmap=/etc/eventlircd.d --socket=/run/lirc/lircd 321 root 5:28 /usr/bin/pulseaudio --system --disallow-exit --exit-idle-time=-1 --disable-shm 323 root 0:00 /usr/lib/systemd/systemd-logind 324 root 0:00 /sbin/crond -f -S 360 root 0:00 [mmal-vchiq] 361 root 0:00 [irq/71-feb10000] 362 root 0:00 [mmal-vchiq] 371 root 0:00 [mmal-vchiq] 375 root 0:00 [cfg80211] 376 root 0:00 [mmal-vchiq] 396 root 0:00 [brcmf_wq/mmc1:0] 403 root 0:00 [brcmf_wdog/mmc1] 525 root 0:00 /usr/sbin/connmand -nr --config=/etc/connman/main.conf 693 root 0:00 /usr/bin/wpa_supplicant -u 751 avahi 0:03 avahi-daemon: running [LibreELEC.local] 794 root 0:00 sshd: /usr/sbin/sshd -D [listener] 0 of 10-100 startups 929 root 0:02 /usr/sbin/nmbd 931 root 0:00 /usr/sbin/smbd 941 root 0:00 {smbd-notifyd} /usr/sbin/smbd 942 root 0:00 {cleanupd} /usr/sbin/smbd 944 root 0:00 {kodi.sh} /bin/sh /usr/lib/kodi/kodi.sh --standalone -fs 956 root 4h01 /usr/lib/kodi/kodi.bin --standalone -fs 958 root 0:00 {lpqd} /usr/sbin/smbd 978 root 0:00 /usr/bin/hciattach /dev/serial1 bcm43xx 3000000 flow - 980 root 0:00 [kworker/u9:2-hc] 1105 root 3:58 /usr/sbin/openvpn /storage/.kodi/addons/service.vpn.manager/UserDefined/my_expressvpn_switzerland_udp (UDP).ovpn 3223 root 0:00 /usr/lib/bluetooth/bluetoothd 3227 root 0:00 [cryptd] 3253 root 0:00 [kworker/u9:1-hc] 7028 root 0:00 [kworker/1:2H] 9290 root 0:00 [kworker/2:2H] 9291 root 0:00 [kworker/3:0H] 9292 root 0:00 [kworker/0:0H] 10180 root 0:00 [kworker/3:2-eve] 10200 root 0:00 [kworker/0:0-mm_] 10243 root 0:00 [kworker/2:0-mm_] 10273 root 0:00 [kworker/1:0-eve] 10284 root 0:00 [kworker/0:2] 10288 root 0:00 [kworker/3:1] 10299 root 0:00 [kworker/2:1-mm_] 10303 root 0:00 [kworker/1:1-eve] 10313 root 0:00 [kworker/0:1-eve] 10322 root 0:00 [kworker/2:2-eve] 10353 root 0:00 /usr/sbin/smbd 10362 root 0:00 {createlog} /bin/sh /usr/bin/createlog 10381 root 0:00 ps xa ################################################################################ # ... output of cat /storage/.config/hwdb.d/99-osmcrf.hwdb # LibreELEC release: RPi4.arm-9.95.1 # ################################################################################ evdev:input:b0003v2017p1689* KEYBOARD_KEY_7002e=volumeup KEYBOARD_KEY_7002d=volumedown KEYBOARD_KEY_7000c=kpleftparen KEYBOARD_KEY_70006=kprightparen evdev:input:b0003v2017p1688* KEYBOARD_KEY_7004a=esc KEYBOARD_KEY_c0060=kpleftparen KEYBOARD_KEY_10084=kprightparen KEYBOARD_KEY_7002e=volumeup KEYBOARD_KEY_7002d=volumedown evdev:input:b0003v2252p1037* KEYBOARD_KEY_7004a=esc KEYBOARD_KEY_c0060=kpleftparen KEYBOARD_KEY_10084=kprightparen ################################################################################ # ... output of cat /storage/.config/modprobe.d/disable-spdif-for-hd-audio.conf # LibreELEC release: RPi4.arm-9.95.1 # ################################################################################ # INTEL HBR WORKAROUND FOR DTS-MA & Dolby TrueHD PLAYBACK # Uncomment the following lines to disable any S/PDIF out to deliver # bitstreamed audio on Intel builds. This is a rough workaround for # users that have both S/PDIF and HDMI audio outputs on their motherboard # or motherboard+discrete graphics combo. # EVEN IF YOU ARE NOT USING THE S/PDIF OUTPUT # but still have one, you will need to uncomment the lines below ! # after uncommenting these lines, you must reboot for these settings to take effect # blacklist snd_hda_codec_realtek # blacklist snd_hda_codec_sigmatel # blacklist snd_hda_codec_cirrus ################################################################################ # ... output of ls -laR /storage/.config/system.d # LibreELEC release: RPi4.arm-9.95.1 # ################################################################################ /storage/.config/system.d: total 38 drwxr-xr-x 2 root root 1024 Mar 11 16:05 . drwxr-xr-x 18 root root 1024 Feb 2 16:29 .. -rw-r--r-- 1 root root 28816 Mar 11 14:19 README -rw-r--r-- 1 root root 1772 Mar 11 14:19 cifs.mount.sample -rw-r--r-- 1 root root 1729 Mar 11 14:19 nfs.mount.sample -rw-r--r-- 1 root root 1145 Mar 11 14:19 openvpn.service.sample -rw-r--r-- 1 root root 421 Mar 11 16:05 wireguard.service.sample