g12a_u21x_v1# g12a_u21x_v1#if fatload mmc 0 0x1000000 u-boot.ext; then go 0x1000000; fi; card in co-phase 0x2, tx-dly 0, clock 400000 co-phase 0x2, tx-dly 0, clock 400000 co-phase 0x2, tx-dly 0, clock 400000 co-phase 0x2, tx-dly 0, clock 400000 co-phase 0x2, tx-dly 0, clock 40000000 init_part() 282: PART_TYPE_DOS [mmc_init] mmc init success 690323 bytes read in 40 ms (16.5 MiB/s) ## Starting application at 0x01000000 ... U-Boot 2021.04-rc5-00008-ga0da06d2f8-dirty (Apr 06 2021 - 22:46:41 +0200) u200 Model: Amlogic Meson G12A U200 Development Board SoC: Amlogic Meson G12A (S905X2) Revision 28:b (40:2) DRAM: 2 GiB MMC: sd@ffe05000: 0, mmc@ffe07000: 1 In: serial@3000 Out: serial@3000 Err: serial@3000 Net: Warning: ethernet@ff3f0000 (eth0) using random MAC address - 06:91:a1:93:5b:08 eth0: ethernet@ff3f0000 Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found /extlinux/extlinux.conf Retrieving file: /extlinux/extlinux.conf 256 bytes read in 5 ms (49.8 KiB/s) 1: LibreELEC Retrieving file: /KERNEL 11212209 bytes read in 480 ms (22.3 MiB/s) append: boot=UUID=0404-0335 disk=UUID=3aede64a-1095-40b6-8f00-9bab3f56e528 debugging mac=00:15:18:01:81:31 console=ttyAML0,115200n8 console=tty0 no_console_suspend systemd.debug_shell=ttyAML0 Retrieving file: /dtb/meson-g12a-u200.dtb 71897 bytes read in 9 ms (7.6 MiB/s) ## Booting kernel from Legacy Image at 08080000 ... Image Name: Image Type: AArch64 Linux Kernel Image (lzo compressed) Data Size: 11212145 Bytes = 10.7 MiB Load Address: 01b80000 Entry Point: 01b80000 Verifying Checksum ... OK ## Flattened Device Tree blob at 08008000 Booting using the fdt blob at 0x8008000 Uncompressing Kernel Image Loading Device Tree to 000000003ffeb000, end 000000003ffff8d8 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.11.10 (emanuel@xanadu) (aarch64-none-linux-gnu-gcc.real (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16)) 10.2.1 20201103, GNU ld (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16)) 2.35.1.20201028) #1 SMP PREEMPT Mon Apr 5 00:40:47 CEST 2021 [ 0.000000] Machine model: Amlogic Meson G12A U200 Development Board [ 0.000000] [Firmware Bug]: Kernel image misaligned at boot, please fix your bootloader! [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'secmon@5000000': base 0x0000000005000000, size 3 MiB [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000048000000, size 896 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 23 pages/cpu s55056 r8192 d30960 u94208 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [ 0.000000] Kernel command line: boot=UUID=0404-0335 disk=UUID=3aede64a-1095-40b6-8f00-9bab3f56e528 debugging mac=00:15:18:01:81:31 console=ttyAML0,115200n8 console=tty0 no_console_suspend systemd.debug_shell=ttyAML0 [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1074760K/2097152K available (11328K kernel code, 1848K rwdata, 4300K rodata, 6208K init, 4444K bss, 104888K reserved, 917504K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000] random: get_random_bytes called from start_kernel+0x5e8/0x7ac with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000207] Console: colour dummy device 80x25 [ 0.002697] printk: console [tty0] enabled [ 0.002740] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.002807] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.002848] ... MAX_LOCK_DEPTH: 48 [ 0.002890] ... MAX_LOCKDEP_KEYS: 8192 [ 0.002932] ... CLASSHASH_SIZE: 4096 [ 0.002974] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.003018] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.003060] ... CHAINHASH_SIZE: 32768 [ 0.003104] memory used by lock dependency info: 3637 kB [ 0.003154] per task-struct memory footprint: 1920 bytes [ 0.003239] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.003335] pid_max: default: 32768 minimum: 301 [ 0.003577] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.003656] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.006935] rcu: Hierarchical SRCU implementation. [ 0.008591] smp: Bringing up secondary CPUs ... [ 0.009754] Detected VIPT I-cache on CPU1 [ 0.009831] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.011170] Detected VIPT I-cache on CPU2 [ 0.011220] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.012542] Detected VIPT I-cache on CPU3 [ 0.012588] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.012852] smp: Brought up 1 node, 4 CPUs [ 0.013160] SMP: Total of 4 processors activated. [ 0.013207] CPU features: detected: 32-bit EL0 Support [ 0.013257] CPU features: detected: CRC32 instructions [ 0.026829] CPU: All CPU(s) started at EL2 [ 0.026945] alternatives: patching kernel code [ 0.028505] devtmpfs: initialized [ 0.060889] KASLR disabled due to lack of seed [ 0.061330] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.061428] futex hash table entries: 1024 (order: 5, 131072 bytes, linear) [ 0.082761] pinctrl core: initialized pinctrl subsystem [ 0.084833] NET: Registered protocol family 16 [ 0.088136] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [ 0.088387] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.088759] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.089987] thermal_sys: Registered thermal governor 'step_wise' [ 0.091045] cpuidle: using governor menu [ 0.091302] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.091533] ASID allocator initialised with 32768 entries [ 0.170806] cryptd: max_cpu_qlen set to 1000 [ 0.179632] VDDAO_3V3: supplied by 12V [ 0.180375] iommu: Default domain type: Translated [ 0.180789] vgaarb: loaded [ 0.181541] SCSI subsystem initialized [ 0.181985] usbcore: registered new interface driver usbfs [ 0.182132] usbcore: registered new interface driver hub [ 0.182431] usbcore: registered new device driver usb [ 0.183211] mc: Linux media interface: v0.10 [ 0.183309] videodev: Linux video capture interface: v2.00 [ 0.183594] pps_core: LinuxPPS API ver. 1 registered [ 0.183645] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.184555] Advanced Linux Sound Architecture Driver Initialized. [ 0.186037] clocksource: Switched to clocksource arch_sys_counter [ 0.186841] FS-Cache: Loaded [ 0.202367] NET: Registered protocol family 2 [ 0.203588] tcp_listen_portaddr_hash hash table entries: 1024 (order: 4, 81920 bytes, linear) [ 0.203919] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.204182] TCP bind hash table entries: 16384 (order: 8, 1179648 bytes, linear) [ 0.205996] TCP: Hash tables configured (established 16384 bind 16384) [ 0.206522] UDP hash table entries: 1024 (order: 5, 163840 bytes, linear) [ 0.206853] UDP-Lite hash table entries: 1024 (order: 5, 163840 bytes, linear) [ 0.207453] NET: Registered protocol family 1 [ 0.208479] RPC: Registered named UNIX socket transport module. [ 0.208540] RPC: Registered udp transport module. [ 0.208586] RPC: Registered tcp transport module. [ 0.208633] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.208698] PCI: CLS 0 bytes, default 64 [ 0.240919] Initialise system trusted keyrings [ 0.241312] workingset: timestamp_bits=46 max_order=19 bucket_order=0 [ 0.262120] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.262699] FS-Cache: Netfs 'nfs' registered for caching [ 0.263883] NFS: Registering the id_resolver key type [ 0.263981] Key type id_resolver registered [ 0.264026] Key type id_legacy registered [ 0.264303] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.265183] FS-Cache: Netfs 'cifs' registered for caching [ 0.265927] Key type cifs.idmap registered [ 0.303143] NET: Registered protocol family 38 [ 0.303228] Key type asymmetric registered [ 0.303292] Asymmetric key parser 'x509' registered [ 0.303394] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.303717] io scheduler mq-deadline registered [ 0.303766] io scheduler kyber registered [ 0.328258] soc soc0: Amlogic Meson G12A (S905X2) Revision 28:b (40:2) Detected [ 0.330956] VCC_3V3: supplied by VDDAO_3V3 [ 0.331144] FLASH_1V8: supplied by VCC_3V3 [ 0.331328] VCC_1V8: supplied by VCC_3V3 [ 0.331509] VDDAO_1V8: supplied by VDDAO_3V3 [ 0.331716] VDDCPU: supplied by regulator-dummy [ 0.334760] ff803000.serial: ttyAML0 at MMIO 0xff803000 (irq = 22, base_baud = 1500000) is a meson_uart [ 1.146818] printk: console [ttyAML0] enabled [ 1.174447] brd: module loaded [ 1.174826] loop: module loaded [ 1.263678] Loading iSCSI transport class v2.0-870. [ 1.265038] iscsi: registered transport (tcp) [ 1.268605] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 1.275074] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld . All Rights Reserved. [ 1.285850] libphy: Fixed MDIO Bus: probed [ 1.290926] tun: Universal TUN/TAP device driver, 1.6 [ 1.295135] usbcore: registered new interface driver rtl8150 [ 1.299312] usbcore: registered new interface driver r8152 [ 1.306179] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.311122] ehci-platform: EHCI generic platform driver [ 1.316562] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.322458] ohci-platform: OHCI generic platform driver [ 1.328593] usbcore: registered new interface driver uas [ 1.332964] usbcore: registered new interface driver usb-storage [ 1.339275] mousedev: PS/2 mouse device common for all mice [ 1.345051] i2c /dev entries driver [ 1.353227] debugfs: Directory 'ff800280.cec' with parent 'regmap' already present! [ 1.372565] meson-gx-mmc ffe05000.sd: Got CD GPIO [ 1.372829] meson-gx-mmc ffe07000.mmc: allocated mmc-pwrseq [ 1.377296] ledtrig-cpu: registered to indicate activity on CPUs [ 1.388219] meson-sm: secure-monitor enabled [ 1.389105] hid: raw HID events driver (C) Jiri Kosina [ 1.395266] usbcore: registered new interface driver usbhid [ 1.397985] usbhid: USB HID core driver [ 1.419403] NET: Registered protocol family 10 [ 1.421026] Segment Routing with IPv6 [ 1.421982] NET: Registered protocol family 17 [ 1.426597] Key type dns_resolver registered [ 1.430913] Loading compiled-in X.509 certificates [ 1.451656] mmc0: new high speed SDHC card at address aaaa [ 1.452739] mmcblk0: mmc0:aaaa SL08G 7.40 GiB [ 1.458391] mmcblk0: p1 p2 [ 1.481131] VCC_5V: supplied by 12V [ 1.553986] meson-drm ff900000.vpu: Queued 3 outputs on vpu [ 1.568493] mmc1: new HS200 MMC card at address 0001 [ 1.573881] mmcblk1: mmc1:0001 D9D16G 14.5 GiB [ 1.576508] mmcblk1boot0: mmc1:0001 D9D16G partition 1 4.00 MiB [ 1.581104] mmcblk1boot1: mmc1:0001 D9D16G partition 2 4.00 MiB [ 1.582930] meson-dw-hdmi ff600000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy) [ 1.586327] mmcblk1rpmb: mmc1:0001 D9D16G partition 3 4.00 MiB, chardev (242:0) [ 1.598714] meson-dw-hdmi ff600000.hdmi-tx: registered DesignWare HDMI I2C bus driver [ 1.610578] meson-drm ff900000.vpu: bound ff600000.hdmi-tx (ops meson_dw_hdmi_ops) [ 1.617993] [drm] Initialized meson 1.0.0 20161109 for ff900000.vpu on minor 0 [ 1.625254] [drm] kms: can't enable cloning when we probably wanted to. [ 1.864598] Console: switching to colour frame buffer device 128x48 [ 1.971672] meson-drm ff900000.vpu: [drm] fb0: mesondrmfb frame buffer device [ 1.987942] meson8b-dwmac ff3f0000.ethernet: IRQ eth_wake_irq not found [ 1.989040] meson8b-dwmac ff3f0000.ethernet: IRQ eth_lpi not found [ 1.995538] meson8b-dwmac ff3f0000.ethernet: PTP uses main clock [ 2.002363] meson8b-dwmac ff3f0000.ethernet: User ID: 0x11, Synopsys ID: 0x37 [ 2.008218] meson8b-dwmac ff3f0000.ethernet: DWMAC1000 [ 2.013445] meson8b-dwmac ff3f0000.ethernet: DMA HW capability register supported [ 2.020800] meson8b-dwmac ff3f0000.ethernet: RX Checksum Offload Engine supported [ 2.028209] meson8b-dwmac ff3f0000.ethernet: COE Type 2 [ 2.033384] meson8b-dwmac ff3f0000.ethernet: TX Checksum insertion supported [ 2.040379] meson8b-dwmac ff3f0000.ethernet: Wake-Up On Lan supported [ 2.046846] meson8b-dwmac ff3f0000.ethernet: Normal descriptors [ 2.052619] meson8b-dwmac ff3f0000.ethernet: Ring mode enabled [ 2.058396] meson8b-dwmac ff3f0000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 2.066332] meson8b-dwmac ff3f0000.ethernet: device MAC address 06:91:a1:93:5b:08 [ 2.074606] libphy: stmmac: probed [ 2.079137] USB_PWR_EN: supplied by VCC_5V [ 2.081754] dwc3-meson-g12a ffe09000.usb: USB2 ports: 2 [ 2.086367] dwc3-meson-g12a ffe09000.usb: USB3 ports: 1 [ 2.095299] dwc2 ff400000.usb: supply vusb_d not found, using dummy regulator [ 2.098777] dwc2 ff400000.usb: supply vusb_a not found, using dummy regulator [ 2.106147] dwc2 ff400000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM [ 2.114641] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller [ 2.118197] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 1 [ 2.125855] xhci-hcd xhci-hcd.3.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x0000000000010010 [ 2.135051] xhci-hcd xhci-hcd.3.auto: irq 37, io mem 0xff500000 [ 2.141567] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11 [ 2.149066] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.156207] usb usb1: Product: xHCI Host Controller [ 2.161035] usb usb1: Manufacturer: Linux 5.11.10 xhci-hcd [ 2.166469] usb usb1: SerialNumber: xhci-hcd.3.auto [ 2.172144] hub 1-0:1.0: USB hub found [ 2.175073] hub 1-0:1.0: 2 ports detected [ 2.179619] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller [ 2.184424] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 2 [ 2.192016] xhci-hcd xhci-hcd.3.auto: Host supports USB 3.0 SuperSpeed [ 2.198561] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.206652] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.11 [ 2.214683] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.221842] usb usb2: Product: xHCI Host Controller [ 2.226671] usb usb2: Manufacturer: Linux 5.11.10 xhci-hcd [ 2.232105] usb usb2: SerialNumber: xhci-hcd.3.auto [ 2.237657] hub 2-0:1.0: USB hub found [ 2.240683] hub 2-0:1.0: 1 port detected [ 2.245456] dwc3-meson-g12a ffe09000.usb: switching to Device Mode [ 2.258553] libphy: mdio_mux: probed [ 2.261497] libphy: mdio_mux: probed [ 2.273651] printk: console [netcon0] enabled [ 2.276951] netconsole: network logging started [ 2.281111] ALSA device list: [ 2.283713] #0: U200 [ 2.289365] Freeing unused kernel memory: 6208K [ 2.302157] Run /init as init process [ 7.534825] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00007f00 [ 7.536977] CPU: 2 PID: 1 Comm: systemd Not tainted 5.11.10 #1 [ 7.542753] Hardware name: Amlogic Meson G12A U200 Development Board (DT) [ 7.549480] Call trace: [ 7.551895] dump_backtrace+0x0/0x1b0 [ 7.555517] show_stack+0x18/0x70 [ 7.558795] dump_stack+0xd0/0x128 [ 7.562159] panic+0x170/0x33c [ 7.565177] do_exit+0x958/0x9a0 [ 7.568369] do_group_exit+0x38/0xa0 [ 7.571905] __arm64_sys_exit_group+0x18/0x20 [ 7.576217] el0_svc_common.constprop.0+0x80/0x234 [ 7.580961] do_el0_svc_compat+0x1c/0x50 [ 7.584842] el0_svc_compat+0x1c/0x50 [ 7.588465] el0_sync_compat_handler+0x90/0x140 [ 7.592950] el0_sync_compat+0x178/0x180 [ 7.596840] SMP: stopping secondary CPUs [ 7.600722] Kernel Offset: 0x180000 from 0xffff800010000000 [ 7.606232] PHYS_OFFSET: 0x0 [ 7.609079] CPU features: 0x00040002,20802004 [ 7.613392] Memory Limit: none [ 7.616422] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00007f00 ]---