smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.8.11_MY] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SanDisk based SSDs Device Model: SanDisk pSSD Serial Number: 060af7ca2 LU WWN Device Id: 5 001b44 0af60a27c Firmware Version: 3 User Capacity: 31.376.707.072 bytes [31,3 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 1.8 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 2d SATA Version is: SATA 2.6, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sat Sep 26 17:49:22 2020 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x51) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 7) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 5 Reallocated_Sector_Ct 0x0002 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0002 100 100 000 Old_age Always - 239 12 Power_Cycle_Count 0x0002 100 100 000 Old_age Always - 1342 171 Program_Fail_Count 0x0002 100 100 000 Old_age Always - 0 172 Erase_Fail_Count 0x0002 100 100 000 Old_age Always - 0 173 Avg_Write/Erase_Count 0x0002 100 100 000 Old_age Always - 30 174 Unexpect_Power_Loss_Ct 0x0002 100 100 000 Old_age Always - 551 187 Reported_Uncorrect 0x0002 100 100 000 Old_age Always - 0 230 Perc_Write/Erase_Count 0x0002 100 100 000 Old_age Always - 100 232 Perc_Avail_Resrvd_Space 0x0003 100 100 005 Pre-fail Always - 0 234 Perc_Write/Erase_Ct_BC 0x0002 100 100 000 Old_age Always - 29 241 Total_LBAs_Written 0x0002 100 100 000 Old_age Always - 457794609 242 Total_LBAs_Read 0x0002 100 100 000 Old_age Always - 514950209 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 10% 239 - # 2 Extended offline Completed without error 90% 185 - # 3 Extended offline Completed without error 10% 73 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.