U-Boot 2020.04 (Jun 01 2020 - 08:34:58 +0200) Allwinner Technology, Build: jenkins-H6-285 CPU: Allwinner H6 (SUN50I) Model: Eachlink H6 Mini DRAM: 3 GiB MMC: mmc@4020000: 0, mmc@4022000: 1 Loading Environment from FAT... Unable to use mmc 1:1... In: serial@5000000 Out: serial@5000000 Err: serial@5000000 Net: No ethernet found. starting USB... No working controllers found Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found /extlinux/extlinux.conf Retrieving file: /extlinux/extlinux.conf 173 bytes read in 6 ms (27.3 KiB/s) 1: LibreELEC Retrieving file: /KERNEL 18724872 bytes read in 1879 ms (9.5 MiB/s) append: boot=UUID=0106-3024 disk=UUID=3f2619e6-6872-4328-b89d-ca4699fa27fa console=tty1 console=ttyS0,115200 Retrieving file: /sun50i-h6-tanix-tx6.dtb 18977 bytes read in 6 ms (3 MiB/s) ## Flattened Device Tree blob at 4fa00000 Booting using the fdt blob at 0x4fa00000 Loading Device Tree to 0000000049ff8000, end 0000000049fffa20 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.6.6 (jenkins@tsuboi) (gcc version 9.2.1 20191025 (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10))) #1 SMP PREEMPT Mon Jun 1 07:49:03 CEST 2020 [ 0.000000] Machine model: Tanix TX6 [ 0.000000] cma: Reserved 384 MiB at 0x00000000e8000000 [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x00000000ffffffff] [ 0.000000] NUMA: NODE_DATA [mem 0xe79e0100-0xe79e1fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] DMA32 [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000ffffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 22 pages/cpu s49496 r8192 d32424 u90112 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 774144 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: boot=UUID=0106-3024 disk=UUID=3f2619e6-6872-4328-b89d-ca4699fa27fa console=tty1 console=ttyS0,115200 [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x7bfff000-0x7ffff000] (64MB) [ 0.000000] Memory: 2605968K/3145728K available (10238K kernel code, 750K rwdata, 4296K rodata, 2944K init, 371K bss, 146544K reserved, 393216K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x2a8/0x430 with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000266] Console: colour dummy device 80x25 [ 0.000753] printk: console [tty1] enabled [ 0.000836] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.000864] pid_max: default: 32768 minimum: 301 [ 0.000958] LSM: Security Framework initializing [ 0.001039] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.001076] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.001141] *** VALIDATE tmpfs *** [ 0.001576] *** VALIDATE proc *** [ 0.001823] *** VALIDATE cgroup *** [ 0.001840] *** VALIDATE cgroup2 *** [ 0.032024] rcu: Hierarchical SRCU implementation. [ 0.048057] smp: Bringing up secondary CPUs ... [ 0.080445] Detected VIPT I-cache on CPU1 [ 0.080494] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.112368] Detected VIPT I-cache on CPU2 [ 0.112402] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.144417] Detected VIPT I-cache on CPU3 [ 0.144445] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.144511] smp: Brought up 1 node, 4 CPUs [ 0.144588] SMP: Total of 4 processors activated. [ 0.144603] CPU features: detected: 32-bit EL0 Support [ 0.144617] CPU features: detected: CRC32 instructions [ 0.151991] CPU: All CPU(s) started at EL2 [ 0.152028] alternatives: patching kernel code [ 0.153738] devtmpfs: initialized [ 0.157663] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.157705] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.168992] pinctrl core: initialized pinctrl subsystem [ 0.169774] thermal_sys: Registered thermal governor 'step_wise' [ 0.170641] NET: Registered protocol family 16 [ 0.173427] DMA: preallocated 256 KiB pool for atomic allocations [ 0.173464] audit: initializing netlink subsys (disabled) [ 0.173613] audit: type=2000 audit(0.172:1): state=initialized audit_enabled=0 res=1 [ 0.174447] cpuidle: using governor menu [ 0.174675] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.174778] ASID allocator initialised with 65536 entries [ 0.175325] Serial: AMBA PL011 UART driver [ 0.195146] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.195181] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.195198] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.195215] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.197766] cryptd: max_cpu_qlen set to 1000 [ 0.202823] iommu: Default domain type: Translated [ 0.203216] SCSI subsystem initialized [ 0.203781] usbcore: registered new interface driver usbfs [ 0.203846] usbcore: registered new interface driver hub [ 0.203915] usbcore: registered new device driver usb [ 0.204325] mc: Linux media interface: v0.10 [ 0.204372] videodev: Linux video capture interface: v2.00 [ 0.204506] pps_core: LinuxPPS API ver. 1 registered [ 0.204522] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.204555] PTP clock support registered [ 0.209183] Advanced Linux Sound Architecture Driver Initialized. [ 0.210061] clocksource: Switched to clocksource arch_sys_counter [ 0.210092] *** VALIDATE bpf *** [ 0.210322] VFS: Disk quotas dquot_6.6.0 [ 0.210389] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.210436] *** VALIDATE ramfs *** [ 0.210456] *** VALIDATE hugetlbfs *** [ 0.217411] NET: Registered protocol family 2 [ 0.217917] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.217995] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.218485] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.219007] TCP: Hash tables configured (established 32768 bind 32768) [ 0.219164] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.219275] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.219530] NET: Registered protocol family 1 [ 0.219983] RPC: Registered named UNIX socket transport module. [ 0.220001] RPC: Registered udp transport module. [ 0.220013] RPC: Registered tcp transport module. [ 0.220025] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.253229] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.260269] Initialise system trusted keyrings [ 0.260428] workingset: timestamp_bits=44 max_order=20 bucket_order=0 [ 0.268394] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.269277] *** VALIDATE nfs *** [ 0.269356] *** VALIDATE nfs4 *** [ 0.269442] NFS: Registering the id_resolver key type [ 0.269476] Key type id_resolver registered [ 0.269488] Key type id_legacy registered [ 0.269508] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.269773] 9p: Installing v9fs 9p2000 file system support [ 0.287522] NET: Registered protocol family 38 [ 0.287549] Key type asymmetric registered [ 0.287562] Asymmetric key parser 'x509' registered [ 0.287575] Asymmetric key parser 'pkcs8' registered [ 0.287628] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 0.287775] io scheduler mq-deadline registered [ 0.287792] io scheduler kyber registered [ 0.288303] sun50i-de2-bus 1000000.bus: Error couldn't map SRAM to device [ 0.289123] sun4i-usb-phy 5100400.phy: failed to get clock usb0_phy [ 0.293515] sun50i-h6-r-pinctrl 7022000.pinctrl: initialized sunXi PIO driver [ 0.307154] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.310889] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 0.318325] loop: module loaded [ 0.321045] libphy: Fixed MDIO Bus: probed [ 0.321859] tun: Universal TUN/TAP device driver, 1.6 [ 0.325267] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.325299] ehci-platform: EHCI generic platform driver [ 0.325494] ehci-platform 5101000.usb: EHCI Host Controller [ 0.325528] ehci-platform 5101000.usb: new USB bus registered, assigned bus number 1 [ 0.325645] ehci-platform 5101000.usb: irq 28, io mem 0x05101000 [ 0.338193] ehci-platform 5101000.usb: USB 2.0 started, EHCI 1.00 [ 0.338861] hub 1-0:1.0: USB hub found [ 0.338909] hub 1-0:1.0: 1 port detected [ 0.339509] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.339547] ohci-platform: OHCI generic platform driver [ 0.339748] ohci-platform 5101400.usb: Generic Platform OHCI controller [ 0.339780] ohci-platform 5101400.usb: new USB bus registered, assigned bus number 2 [ 0.339891] ohci-platform 5101400.usb: irq 29, io mem 0x05101400 [ 0.406721] hub 2-0:1.0: USB hub found [ 0.406770] hub 2-0:1.0: 1 port detected [ 0.407698] usbcore: registered new interface driver uas [ 0.407801] usbcore: registered new interface driver usb-storage [ 0.410536] sun6i-rtc 7000000.rtc: registered as rtc0 [ 0.410565] sun6i-rtc 7000000.rtc: RTC enabled [ 0.410682] i2c /dev entries driver [ 0.411192] IR NEC protocol handler initialized [ 0.411211] IR RC5(x/sz) protocol handler initialized [ 0.411223] IR RC6 protocol handler initialized [ 0.411235] IR JVC protocol handler initialized [ 0.411247] IR Sony protocol handler initialized [ 0.411259] IR SANYO protocol handler initialized [ 0.411271] IR Sharp protocol handler initialized [ 0.411283] IR MCE Keyboard/mouse protocol handler initialized [ 0.411297] IR XMP protocol handler initialized [ 0.411308] ir_imon_decoder: IR iMON protocol handler initialized [ 0.411322] IR RCMM protocol handler initialized [ 0.411501] sun50i-h6-r-pinctrl 7022000.pinctrl: 7022000.pinctrl supply vcc-pl not found, using dummy regulator [ 0.411741] Registered IR keymap rc-tanix-tx5max [ 0.411837] rc rc0: sunxi-ir as /devices/platform/soc/7040000.ir/rc/rc0 [ 0.411998] rc rc0: lirc_dev: driver sunxi-ir registered at minor = 0, raw IR receiver, no transmitter [ 0.412147] input: sunxi-ir as /devices/platform/soc/7040000.ir/rc/rc0/input0 [ 0.412441] sunxi-ir 7040000.ir: initialized sunXi IR driver [ 0.412631] usbcore: registered new interface driver xbox_remote [ 0.414174] sunxi-wdt 7020400.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.414698] sun50i-cpufreq-nvmem: probe of sun50i-cpufreq-nvmem failed with error -2 [ 0.415017] sdhci: Secure Digital Host Controller Interface driver [ 0.415037] sdhci: Copyright(c) Pierre Ossman [ 0.415164] Synopsys Designware Multimedia Card Interface Driver [ 0.415852] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.416542] ledtrig-cpu: registered to indicate activity on CPUs [ 0.416878] sun8i-ce 1904000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz) [ 0.417081] sun8i-ce 1904000.crypto: will run requests pump with realtime priority [ 0.417187] sun8i-ce 1904000.crypto: will run requests pump with realtime priority [ 0.417283] sun8i-ce 1904000.crypto: will run requests pump with realtime priority [ 0.417374] sun8i-ce 1904000.crypto: will run requests pump with realtime priority [ 0.417459] sun8i-ce 1904000.crypto: Register cbc(aes) [ 0.417715] sun8i-ce 1904000.crypto: Register ecb(aes) [ 0.417922] sun8i-ce 1904000.crypto: Register cbc(des3_ede) [ 0.418174] sun8i-ce 1904000.crypto: Register ecb(des3_ede) [ 0.418394] sun8i-ce 1904000.crypto: CryptoEngine Die ID 0 [ 0.418882] hid: raw HID events driver (C) Jiri Kosina [ 0.419624] usbcore: registered new interface driver usbhid [ 0.419647] usbhid: USB HID core driver [ 0.420546] cedrus 1c0e000.video-codec: Device registered as /dev/video0 [ 0.423988] Initializing XFRM netlink socket [ 0.424029] NET: Registered protocol family 17 [ 0.424222] 9pnet: Installing 9P2000 support [ 0.424262] Key type dns_resolver registered [ 0.424608] registered taskstats version 1 [ 0.424625] Loading compiled-in X.509 certificates [ 0.441751] sun50i-h6-pinctrl 300b000.pinctrl: initialized sunXi PIO driver [ 0.442803] sun50i-h6-pinctrl 300b000.pinctrl: 300b000.pinctrl supply vcc-pb not found, using dummy regulator [ 0.474542] sun50i-h6-pinctrl 300b000.pinctrl: 300b000.pinctrl supply vcc-ph not found, using dummy regulator [ 0.474980] printk: console [ttyS0] disabled [ 0.475049] 5000000.serial: ttyS0 at MMIO 0x5000000 (irq = 23, base_baud = 1500000) is a 16550A [ 1.688297] printk: console [ttyS0] enabled [ 1.712286] sun4i-drm display-engine: bound 1100000.mixer (ops sun8i_mixer_ops) [ 1.719805] sun4i-drm display-engine: bound 6510000.tcon-top (ops sun8i_tcon_top_ops) [ 1.727885] sun4i-drm display-engine: bound 6515000.lcd-controller (ops sun4i_tcon_ops) [ 1.735956] sun8i-dw-hdmi 6000000.hdmi: 6000000.hdmi supply hvcc not found, using dummy regulator [ 1.745150] sun8i-dw-hdmi 6000000.hdmi: Detected HDMI TX controller v2.12a with HDCP (DWC HDMI 2.0 TX PHY) [ 1.755322] sun8i-dw-hdmi 6000000.hdmi: registered DesignWare HDMI I2C bus driver [ 1.763752] sun4i-drm display-engine: bound 6000000.hdmi (ops sun8i_dw_hdmi_ops) [ 1.771184] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.777808] [drm] No driver support for vblank timestamp query. [ 1.784064] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0 [ 1.897848] random: fast init done [ 1.987832] Console: switching to colour frame buffer device 240x67 [ 2.027555] sun4i-drm display-engine: fb0: sun4i-drmdrmfb frame buffer device [ 2.035796] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [ 2.041468] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 3 [ 2.049440] xhci-hcd xhci-hcd.4.auto: hcc params 0x0220f064 hci version 0x100 quirks 0x0000000002010010 [ 2.059110] xhci-hcd xhci-hcd.4.auto: irq 30, io mem 0x05200000 [ 2.065935] hub 3-0:1.0: USB hub found [ 2.069829] hub 3-0:1.0: 1 port detected [ 2.074142] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [ 2.079794] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 4 [ 2.087640] xhci-hcd xhci-hcd.4.auto: Host supports USB 3.0 SuperSpeed [ 2.094386] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.103169] hub 4-0:1.0: USB hub found [ 2.107048] hub 4-0:1.0: 1 port detected [ 2.111980] ehci-platform 5311000.usb: EHCI Host Controller [ 2.117725] ehci-platform 5311000.usb: new USB bus registered, assigned bus number 5 [ 2.125760] ehci-platform 5311000.usb: irq 31, io mem 0x05311000 [ 2.146076] ehci-platform 5311000.usb: USB 2.0 started, EHCI 1.00 [ 2.152898] hub 5-0:1.0: USB hub found [ 2.156780] hub 5-0:1.0: 1 port detected [ 2.161582] ohci-platform 5311400.usb: Generic Platform OHCI controller [ 2.168387] ohci-platform 5311400.usb: new USB bus registered, assigned bus number 6 [ 2.176454] ohci-platform 5311400.usb: irq 32, io mem 0x05311400 [ 2.246764] hub 6-0:1.0: USB hub found [ 2.250648] hub 6-0:1.0: 1 port detected [ 2.255550] usb_phy_generic usb_phy_generic.5.auto: usb_phy_generic.5.auto supply vcc not found, using dummy regulator [ 2.267304] musb-hdrc musb-hdrc.6.auto: MUSB HDRC host driver [ 2.273227] musb-hdrc musb-hdrc.6.auto: new USB bus registered, assigned bus number 7 [ 2.281868] hub 7-0:1.0: USB hub found [ 2.285766] hub 7-0:1.0: 1 port detected [ 2.293902] ac200-ephy ac200-ephy: DMA mask not set [ 2.304179] sun50i-h6-pinctrl 300b000.pinctrl: 300b000.pinctrl supply vcc-pf not found, using dummy regulator [ 2.314907] sunxi-mmc 4020000.mmc: Got CD GPIO [ 2.342759] sunxi-mmc 4020000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 2.376970] sunxi-mmc 4022000.mmc: initialized, max. request size: 2048 KB, uses new timings mode [ 2.388097] asoc-simple-card sound: i2s-hifi <-> 5091000.i2s mapping ok [ 2.395846] sun6i-rtc 7000000.rtc: setting system clock to 1970-01-01T00:00:05 UTC (5) [ 2.404287] ALSA device list: [ 2.407382] #0: allwinner-hdmi [ 2.412315] Freeing unused kernel memory: 2944K [ 2.413077] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.428292] mmc0: new high speed SDHC card at address aaaa [ 2.434720] mmcblk0: mmc0:aaaa SU32G 29.7 GiB [ 2.442121] Run /init as init process [ 2.449212] mmcblk0: p1 p2