DDR version 1.16 20190713 ID:0xFFF In DDR3 333MHz Bus Width=32 Col=11 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=4096MB ddrconfig:3 OUT Boot1 Release Time: May 13 2019 17:34:36, version: 2.50 ChipType = 0x11, 233 mmc2:cmd19,100 SdmmcInit=2 0 BootCapSize=2000 UserCapSize=29820MB FwPartOffset=2000 , 2000 mmc0:cmd5,20 SdmmcInit=0 0 BootCapSize=0 UserCapSize=30436MB FwPartOffset=2000 , 0 StorageInit ok = 163697 Raw SecureMode = 0 SecureInit read PBA: 0x4 SecureInit read PBA: 0x404 SecureInit read PBA: 0x804 SecureInit read PBA: 0xc04 SecureInit read PBA: 0x1004 SecureInit ret = 0, SecureMode = 0 atags_set_bootdev: ret:(0) GPT 0x337a9f0 signature is wrong recovery gpt... GPT 0x337a9f0 signature is wrong recovery gpt fail! LoadTrust Addr:0x4000 No find bl30.bin No find bl32.bin Load uboot, ReadLba = 2000 Load OK, addr=0x200000, size=0xa0424 RunBL31 0x10000 NOTICE: BL31: v1.3(debug):0e4d696 NOTICE: BL31: Built : 09:22:40, Aug 27 2019 NOTICE: BL31:Rockchip release version: v1.3 INFO: ARM GICv2 driver initialized INFO: Using opteed sec cpu_context! INFO: boot cpu mask: 1 INFO: plat_rockchip_pmu_init: pd status 0xe INFO: BL31: Initializing runtime services WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK ERROR: Error initializing runtime service opteed_fast INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x200000 INFO: SPSR = 0x3c9 U-Boot 2020.01 (Apr 10 2020 - 15:27:07 +0000) Model: Rockchip RK3328 EVB DRAM: 4 GiB MMC: rksdmmc@ff500000: 1, rksdmmc@ff520000: 0 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial@ff130000 Out: serial@ff130000 Err: serial@ff130000 Model: Rockchip RK3328 EVB Net: Could not get PHY for ethernet@ff540000: addr -1 No ethernet found. Hit any key to stop autoboot: 0 starting USB... Bus usb@ff5c0000: USB EHCI 1.00 Bus usb@ff5d0000: USB OHCI 1.0 Bus usb@ff580000: Bus usb@ff600000: Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus usb@ff5c0000 for devices... 1 USB Device(s) found scanning bus usb@ff5d0000 for devices... 1 USB Device(s) found scanning bus usb@ff580000 for devices... 1 USB Device(s) found scanning bus usb@ff600000 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Device 0: unknown device switch to partitions #0, OK mmc1 is current device Scanning mmc 1:1... Found /extlinux/extlinux.conf Retrieving file: /extlinux/extlinux.conf 228 bytes read in 7 ms (31.3 KiB/s) 1: LibreELEC Retrieving file: /KERNEL 16048136 bytes read in 700 ms (21.9 MiB/s) append: boot=UUID=3112-3740 disk=UUID=30a3ce3e-6871-45cd-a8d1-0915fd5c5338 quiet console=uart8250,mmio32,0xff130000 console=tty0 coherent_pool=2M cec.debounce_ms=5000 Retrieving file: /rk3328-box-h96mp.dtb 36564 bytes read in 7 ms (5 MiB/s) ## Flattened Device Tree blob at 01f00000 Booting using the fdt blob at 0x1f00000 Loading Device Tree to 00000000fcf1b000, end 00000000fcf26ed3 ... OK Starting kernel ... [ 0.194346] gpio-syscon ff100000.syscon:grf-gpio: can't read the data register offset! [ 0.207078] dwhdmi-rockchip ff3c0000.hdmi: [drm:dw_hdmi_rockchip_bind] *ERROR* Unable to parse OF data [ 0.207936] rockchip-drm display-subsystem: failed to bind ff3c0000.hdmi (ops dw_hdmi_rockchip_ops): -517 [ 0.223522] rk_gmac-dwmac ff550000.ethernet: IRQ eth_wake_irq not found [ 0.224133] rk_gmac-dwmac ff550000.ethernet: IRQ eth_lpi not found [ 0.224953] rk_gmac-dwmac ff550000.ethernet: Can not read property: tx_delay. [ 0.225676] rk_gmac-dwmac ff550000.ethernet: set tx_delay to 0x30 [ 0.226230] rk_gmac-dwmac ff550000.ethernet: Can not read property: rx_delay. [ 0.226871] rk_gmac-dwmac ff550000.ethernet: set rx_delay to 0x10 [ 0.227557] rk_gmac-dwmac ff550000.ethernet: cannot get clock clk_mac_refout [ 0.228193] rk_gmac-dwmac ff550000.ethernet: cannot get clock clk_mac_speed [ 0.374908] rk808 1-0018: failed to read the chip id at 0x17 [ 0.733624] rockchip-pm-domain ff100000.syscon:power-controller: failed to get ack on domain 'pd_hevc', val=0x88220 [ 139.876060] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100 [ 139.877077] CPU: 3 PID: 1 Comm: busybox Not tainted 5.4.0 #1 [ 139.877806] Hardware name: Rockchip RK3328 TV box H96 Max+ (DT) [ 139.878576] Call trace: [ 139.878927] dump_backtrace+0x0/0x170 [ 139.879413] show_stack+0x14/0x20 [ 139.879866] dump_stack+0xb0/0xd8 [ 139.880309] panic+0x144/0x2fc [ 139.880722] do_exit+0x994/0x9c8 [ 139.881154] do_group_exit+0x40/0xa8 [ 139.881629] __arm64_sys_exit_group+0x14/0x18 [ 139.882208] el0_svc_common.constprop.2+0x88/0x150 [ 139.882832] el0_svc_compat_handler+0x18/0x20 [ 139.883407] el0_svc_compat+0x8/0x10 [ 139.883885] SMP: stopping secondary CPUs [ 139.884397] Kernel Offset: disabled [ 139.884845] CPU features: 0x0002,20002004 [ 139.885360] Memory Limit: none [ 139.885776] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100 ]---