▒DDR version 1.16 20190713 ID:0xFFF In DDR3 333MHz Bus Width=32 Col=11 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=4096MB ddrconfig:3 OUT Boot1 Release Time: May 13 2019 17:34:36, version: 2.50 ChipType = 0x11, 232 mmc2:cmd19,100 SdmmcInit=2 0 BootCapSize=2000 UserCapSize=29820MB FwPartOffset=2000 , 2000 mmc0:cmd5,20 SdmmcInit=0 0 BootCapSize=0 UserCapSize=15193MB FwPartOffset=2000 , 0 StorageInit ok = 166359 Raw SecureMode = 0 SecureInit read PBA: 0x4 SecureInit read PBA: 0x404 SecureInit read PBA: 0x804 SecureInit read PBA: 0xc04 SecureInit read PBA: 0x1004 SecureInit ret = 0, SecureMode = 0 atags_set_bootdev: ret:(0) GPT 0x337a9f0 signature is wrong recovery gpt... GPT 0x337a9f0 signature is wrong recovery gpt fail! LoadTrust Addr:0x4000 No find bl30.bin No find bl32.bin Load uboot, ReadLba = 2000 Load OK, addr=0x200000, size=0xa0598 RunBL31 0x10000 NOTICE: BL31: v1.3(debug):0e4d696 NOTICE: BL31: Built : 09:22:40, Aug 27 2019 NOTICE: BL31:Rockchip release version: v1.3 INFO: ARM GICv2 driver initialized INFO: Using opteed sec cpu_context! INFO: boot cpu mask: 1 INFO: plat_rockchip_pmu_init: pd status 0xe INFO: BL31: Initializing runtime services WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK ERROR: Error initializing runtime service opteed_fast INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x200000 INFO: SPSR = 0x3c9 U-Boot 2017.09 (Dec 31 2019 - 08:39:40 +0000) Model: Rockchip RK3328 EVB DRAM: 4 GiB Relocation Offset is: fed19000 rk8xx_read: read reg 0x17 failed, ret=-121 MMC: rksdmmc@ff500000: 1, rksdmmc@ff520000: 0 Using default environment In: serial@ff130000 Out: serial@ff130000 Err: serial@ff130000 Model: Rockchip RK3328 EVB CLK: apll 400000000 Hz dpll 664000000 Hz cpll 1200000000 Hz gpll 491009999 Hz npll 600000000 Hz armclk 600000000 Hz aclk_bus 150000000 Hz hclk_bus 75000000 Hz pclk_bus 75000000 Hz aclk_peri 150000000 Hz hclk_peri 75000000 Hz pclk_peri 75000000 Hz Net: No ethernet found. Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc1 is current device Scanning mmc 1:1... Found /extlinux/extlinux.conf Retrieving file: /extlinux/extlinux.conf reading /extlinux/extlinux.conf 228 bytes read in 3 ms (74.2 KiB/s) 1: LibreELEC Retrieving file: /KERNEL reading /KERNEL 16048136 bytes read in 682 ms (22.4 MiB/s) append: boot=UUID=3112-3740 disk=UUID=30a3ce3e-6871-45cd-a8d1-0915fd5c5338 quiet console=uart8250,mmio32,0xff130000 console=tty0 coherent_pool=2M cec.debounce_ms=5000 Retrieving file: /rk3328-box-h96mp.dtb reading /rk3328-box-h96mp.dtb 36564 bytes read in 5 ms (7 MiB/s) ## Flattened Device Tree blob at 01f00000 Booting using the fdt blob at 0x1f00000 Loading Device Tree to 00000000fcefa000, end 00000000fcf05ed3 ... OK Adding bank: start=0x00200000, size=0xfee00000 Starting kernel ... [ 0.195564] gpio-syscon ff100000.syscon:grf-gpio: can't read the data register offset! [ 0.208421] dwhdmi-rockchip ff3c0000.hdmi: [drm:dw_hdmi_rockchip_bind] *ERROR* Unable to parse OF data [ 0.209282] rockchip-drm display-subsystem: failed to bind ff3c0000.hdmi (ops dw_hdmi_rockchip_ops): -517 [ 0.224956] rk_gmac-dwmac ff550000.ethernet: IRQ eth_wake_irq not found [ 0.225642] rk_gmac-dwmac ff550000.ethernet: IRQ eth_lpi not found [ 0.226507] rk_gmac-dwmac ff550000.ethernet: Can not read property: tx_delay. [ 0.227154] rk_gmac-dwmac ff550000.ethernet: set tx_delay to 0x30 [ 0.227705] rk_gmac-dwmac ff550000.ethernet: Can not read property: rx_delay. [ 0.228369] rk_gmac-dwmac ff550000.ethernet: set rx_delay to 0x10 [ 0.229017] rk_gmac-dwmac ff550000.ethernet: cannot get clock clk_mac_refout [ 0.229651] rk_gmac-dwmac ff550000.ethernet: cannot get clock clk_mac_speed [ 0.378467] rk808 1-0018: failed to read the chip id at 0x17 [ 0.737572] rockchip-pm-domain ff100000.syscon:power-controller: failed to get ack on domain 'pd_hevc', val=0x88220 ▒[ 27.272304] reboot: Restarting system INFO: PSCI Power Domain Map: INFO: Domain Node : Level 2, parent_node -1, State ON (0x0) INFO: Domain Node : Level 1, parent_node 0, State ON (0x0) INFO: Domain Node : Level 0, parent_node 0, State ON (0x0) INFO: Domain Node : Level 0, parent_node 0, State ON (0x0) INFO: CPU Node : MPID 0x0, parent_node 1, State ON (0x0) INFO: CPU Node : MPID 0x1, parent_node 1, State ON (0x0) INFO: CPU Node : MPID 0x2, parent_node 1, State ON (0x0) INFO: CPU Node : MPID 0x3, parent_node 1, State ON (0x0) DDR version 1.16 20190713 ID:0xFFF In SRX DDR3 333MHz Bus Width=32 Col=11 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=4096MB ddrconfig:3 OUT Boot1 Release Time: May 13 2019 17:34:36, version: 2.50 ChipType = 0x11, 310 mmc2:cmd19,100 SdmmcInit=2 0 BootCapSize=2000 UserCapSize=29820MB FwPartOffset=2000 , 2000 mmc0:cmd5,20 SdmmcInit=0 0 BootCapSize=0 UserCapSize=15193MB FwPartOffset=2000 , 0 StorageInit ok = 42625 Raw SecureMode = 0 SecureInit read PBA: 0x4 SecureInit read PBA: 0x404 SecureInit read PBA: 0x804 SecureInit read PBA: 0xc04 SecureInit read PBA: 0x1004 SecureInit ret = 0, SecureMode = 0 atags_set_bootdev: ret:(0) GPT 0x337a9f0 signature is wrong recovery gpt... GPT 0x337a9f0 signature is wrong recovery gpt fail! LoadTrust Addr:0x4000 No find bl30.bin No find bl32.bin Load uboot, ReadLba = 2000 Load OK, addr=0x200000, size=0xa0598 RunBL31 0x10000 NOTICE: BL31: v1.3(debug):0e4d696 NOTICE: BL31: Built : 09:22:40, Aug 27 2019 NOTICE: BL31:Rockchip release version: v1.3 INFO: ARM GICv2 driver initialized INFO: Using opteed sec cpu_context! INFO: boot cpu mask: 1 INFO: plat_rockchip_pmu_init: pd status 0xe INFO: BL31: Initializing runtime services WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK ERROR: Error initializing runtime service opteed_fast INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x200000 INFO: SPSR = 0x3c9 U-Boot 2017.09 (Dec 31 2019 - 08:39:40 +0000) Model: Rockchip RK3328 EVB DRAM: 4 GiB Relocation Offset is: fed19000 rk8xx_read: read reg 0x17 failed, ret=-121 MMC: rksdmmc@ff500000: 1, rksdmmc@ff520000: 0 Using default environment In: serial@ff130000 Out: serial@ff130000 Err: serial@ff130000 Model: Rockchip RK3328 EVB CLK: apll 400000000 Hz dpll 664000000 Hz cpll 1200000000 Hz gpll 491009999 Hz npll 600000000 Hz armclk 600000000 Hz aclk_bus 150000000 Hz hclk_bus 75000000 Hz pclk_bus 75000000 Hz aclk_peri 150000000 Hz hclk_peri 75000000 Hz pclk_peri 75000000 Hz Net: No ethernet found. Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc1 is current device Scanning mmc 1:1... Found /extlinux/extlinux.conf Retrieving file: /extlinux/extlinux.conf reading /extlinux/extlinux.conf 228 bytes read in 3 ms (74.2 KiB/s) 1: LibreELEC Retrieving file: /KERNEL reading /KERNEL 16048136 bytes read in 682 ms (22.4 MiB/s) append: boot=UUID=3112-3740 disk=UUID=30a3ce3e-6871-45cd-a8d1-0915fd5c5338 quiet console=uart8250,mmio32,0xff130000 console=tty0 coherent_pool=2M cec.debounce_ms=5000 Retrieving file: /rk3328-box-h96mp.dtb reading /rk3328-box-h96mp.dtb 36564 bytes read in 5 ms (7 MiB/s) ## Flattened Device Tree blob at 01f00000 Booting using the fdt blob at 0x1f00000 Loading Device Tree to 00000000fcefa000, end 00000000fcf05ed3 ... OK Adding bank: start=0x00200000, size=0xfee00000 Starting kernel ... [ 0.193721] gpio-syscon ff100000.syscon:grf-gpio: can't read the data register offset! [ 0.206518] dwhdmi-rockchip ff3c0000.hdmi: [drm:dw_hdmi_rockchip_bind] *ERROR* Unable to parse OF data [ 0.207376] rockchip-drm display-subsystem: failed to bind ff3c0000.hdmi (ops dw_hdmi_rockchip_ops): -517 [ 0.223111] rk_gmac-dwmac ff550000.ethernet: IRQ eth_wake_irq not found [ 0.223722] rk_gmac-dwmac ff550000.ethernet: IRQ eth_lpi not found [ 0.224510] rk_gmac-dwmac ff550000.ethernet: Can not read property: tx_delay. [ 0.225191] rk_gmac-dwmac ff550000.ethernet: set tx_delay to 0x30 [ 0.225743] rk_gmac-dwmac ff550000.ethernet: Can not read property: rx_delay. [ 0.226381] rk_gmac-dwmac ff550000.ethernet: set rx_delay to 0x10 [ 0.227030] rk_gmac-dwmac ff550000.ethernet: cannot get clock clk_mac_refout [ 0.227665] rk_gmac-dwmac ff550000.ethernet: cannot get clock clk_mac_speed [ 0.375118] rk808 1-0018: failed to read the chip id at 0x17 [ 0.711090] rockchip-pm-domain ff100000.syscon:power-controller: failed to get ack on domain 'pd_hevc', val=0x88220