Trying to boot from MMC1


U-Boot 2019.04 (Jul 15 2019 - 12:32:19 +0200) Allwinner Technology

CPU:   Allwinner H3 (SUN8I 1680)
Model: Xunlong Orange Pi One
DRAM:  512 MiB
MMC:   mmc@1c0f000: 0
Loading Environment from FAT... *** Warning - bad CRC, using default environment

In:    serial@1c28000
Out:   serial@1c28000
Err:   serial@1c28000
Net:   phy interface0
eth0: ethernet@1c30000
starting USB...
No controllers found
Hit any key to stop autoboot:  0 
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
181 bytes read in 6 ms (29.3 KiB/s)
1:      LibreELEC
Retrieving file: /KERNEL
8340800 bytes read in 696 ms (11.4 MiB/s)
append: boot=UUID=1507-1459 disk=UUID=405f9a3a-bb85-44bb-8cdf-cde297055ad5 quiet console=ttyS0,115200 console=tty1
Retrieving file: /sun8i-h3-orangepi-one.dtb
20788 bytes read in 6 ms (3.3 MiB/s)
## Flattened Device Tree blob at 43000000
   Booting using the fdt blob at 0x43000000
   Loading Device Tree to 49ff7000, end 49fff133 ... OK

Starting kernel ...

[    0.001450] /cpus/cpu@0 missing clock-frequency property
[    0.001484] /cpus/cpu@1 missing clock-frequency property
[    0.001505] /cpus/cpu@2 missing clock-frequency property
[    0.001527] /cpus/cpu@3 missing clock-frequency property
[    0.104217] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO
[    0.896094] sun4i-i2s 1c22800.i2s: Max playback channels changed from 2 to 8