U-Boot SPL 2020.01-rc1 (Feb 05 2020 - 07:21:09 +0100) DRAM: 512 MiB CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2 Trying to boot from MMC1 U-Boot 2020.01-rc1 (Feb 05 2020 - 07:21:09 +0100) Allwinner Technology CPU: Allwinner A10 (SUN4I) Model: Mele A1000 I2C: ready DRAM: 512 MiB MMC: mmc@1c0f000: 0 Loading Environment from FAT... *** Warning - bad CRC, using default environment HDMI connected: Setting up a 1920x1200 dvi console (overscan 0x0) In: serial Out: vga Err: vga Net: Error: ethernet@1c0b000 address not set. eth-1: ethernet@1c0b000 starting USB... No working controllers found Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found /extlinux/extlinux.conf Retrieving file: /extlinux/extlinux.conf 169 bytes read in 11 ms (14.6 KiB/s) 1: LibreELEC Retrieving file: /KERNEL 8738408 bytes read in 711 ms (11.7 MiB/s) append: boot=UUID=0502-3041 disk=UUID=6e49efd9-c011-4553-987f-cef4015d23c8 console=ttyS0,115200 console=tty1 Retrieving file: /sun4i-a10-a1000.dtb 23347 bytes read in 10 ms (2.2 MiB/s) ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Device Tree to 49ff7000, end 49fffb32 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.5.0 (jernej@kista) (gcc version 9.2.0 (GCC)) #1 SMP Wed Feb 5 07:28:50 CET 2020 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Mele A1000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Reserved memory: created CMA memory pool at 0x4a000000, size 96 MiB [ 0.000000] OF: reserved mem: initialized node default-pool, compatible id shared-dma-pool [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] percpu: Embedded 15 pages/cpu s32268 r8192 d20980 u61440 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 127689 [ 0.000000] Kernel command line: boot=UUID=0502-3041 disk=UUID=6e49efd9-c011-4553-987f-cef4015d23c8 console=ttyS0,115200 console=tty1 root=/dev/ram0 rdinit=/init [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 394596K/515288K available (8192K kernel code, 422K rwdata, 2164K rodata, 5120K init, 265K bss, 22388K reserved, 98304K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000020] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000044] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000476] Console: colour dummy device 80x30 [ 0.000732] printk: console [tty1] enabled [ 0.000775] Calibrating delay loop... 1001.88 BogoMIPS (lpj=5009408) [ 0.040104] pid_max: default: 32768 minimum: 301 [ 0.040286] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.040315] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.040406] *** VALIDATE tmpfs *** [ 0.040968] *** VALIDATE proc *** [ 0.041281] *** VALIDATE cgroup1 *** [ 0.041307] *** VALIDATE cgroup2 *** [ 0.041327] CPU: Testing write buffer coherency: ok [ 0.041730] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.042412] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.042600] rcu: Hierarchical SRCU implementation. [ 0.043129] smp: Bringing up secondary CPUs ... [ 0.043155] smp: Brought up 1 node, 1 CPU [ 0.043169] SMP: Total of 1 processors activated (1001.88 BogoMIPS). [ 0.043184] CPU: All CPU(s) started in SVC mode. [ 0.043719] devtmpfs: initialized [ 0.048404] random: get_random_u32 called from bucket_table_alloc+0x58/0x14c with crng_init=0 [ 0.048888] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 0.049128] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.049167] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.055028] pinctrl core: initialized pinctrl subsystem [ 0.055694] thermal_sys: Registered thermal governor 'step_wise' [ 0.056568] NET: Registered protocol family 16 [ 0.058514] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.059293] cpuidle: using governor ladder [ 0.059316] cpuidle: using governor menu [ 0.059471] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.081424] SCSI subsystem initialized [ 0.081991] usbcore: registered new interface driver usbfs [ 0.082055] usbcore: registered new interface driver hub [ 0.082123] usbcore: registered new device driver usb [ 0.082363] mc: Linux media interface: v0.10 [ 0.082415] videodev: Linux video capture interface: v2.00 [ 0.082558] pps_core: LinuxPPS API ver. 1 registered [ 0.082574] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.082608] PTP clock support registered [ 0.083099] Advanced Linux Sound Architecture Driver Initialized. [ 0.084106] clocksource: Switched to clocksource timer [ 0.084442] *** VALIDATE ramfs *** [ 0.085343] simple-framebuffer 5f736000.framebuffer: framebuffer at 0x5f736000, 0x8ca000 bytes, mapped to 0x(ptrval) [ 0.085381] simple-framebuffer 5f736000.framebuffer: format=x8r8g8b8, mode=1920x1200x32, linelength=7680 [ 0.119120] Console: switching to colour frame buffer device 240x75 [ 0.152387] simple-framebuffer 5f736000.framebuffer: fb0: simplefb registered! [ 0.160496] NET: Registered protocol family 2 [ 0.161297] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.161555] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.161792] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.162042] TCP: Hash tables configured (established 4096 bind 4096) [ 0.162326] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.162519] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.162853] NET: Registered protocol family 1 [ 0.163620] RPC: Registered named UNIX socket transport module. [ 0.163794] RPC: Registered udp transport module. [ 0.163915] RPC: Registered tcp transport module. [ 0.164031] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.186904] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 0.190460] Initialise system trusted keyrings [ 0.190844] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 0.198450] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.200079] NFS: Registering the id_resolver key type [ 0.200265] Key type id_resolver registered [ 0.200383] Key type id_legacy registered [ 0.200508] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.201041] NET: Registered protocol family 38 [ 0.201179] Key type asymmetric registered [ 0.201296] Asymmetric key parser 'x509' registered [ 0.201431] Asymmetric key parser 'pkcs8' registered [ 0.201604] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.202011] io scheduler mq-deadline registered [ 0.202140] io scheduler kyber registered [ 0.203545] sun4i-usb-phy 1c13400.phy: Couldn't get regulator usb1_vbus... Deferring probe [ 0.207798] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.264521] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.267286] sun4i-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pb not found, using dummy regulator [ 0.268482] printk: console [ttyS0] disabled [ 0.288753] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 41, base_baud = 1500000) is a U6_16550A [ 1.788621] printk: console [ttyS0] enabled [ 1.805636] sun4i-drm display-engine: bound 1e00000.display-frontend (ops 0xc0951038) [ 1.822411] sun4i-drm display-engine: bound 1e20000.display-frontend (ops 0xc0951038) [ 1.839194] sun4i-drm display-engine: bound 1e60000.display-backend (ops 0xc0950858) [ 1.855529] sun4i-drm display-engine: bound 1e40000.display-backend (ops 0xc0950858) [ 1.872351] sun4i-drm display-engine: No panel or bridge found... RGB output disabled [ 1.888536] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops 0xc094f580) [ 1.904896] sun4i-drm display-engine: No panel or bridge found... RGB output disabled [ 1.921066] sun4i-drm display-engine: bound 1c0d000.lcd-controller (ops 0xc094f580) [ 1.937784] sun4i-drm display-engine: bound 1c16000.hdmi (ops 0xc0951924) [ 1.952905] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.967806] [drm] No driver support for vblank timestamp query. [ 1.982006] fb0: switching to sun4i-drm-fb from simple [ 1.995752] Console: switching to colour dummy device 80x30 [ 2.002228] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0 [ 2.097409] Console: switching to colour frame buffer device 240x75 [ 2.137049] sun4i-drm display-engine: fb0: sun4i-drmdrmfb frame buffer device [ 2.158113] brd: module loaded [ 2.161416] loop: module loaded [ 2.186075] ahci-sunxi 1c18000.sata: 1c18000.sata supply ahci not found, using dummy regulator [ 2.195079] ahci-sunxi 1c18000.sata: 1c18000.sata supply phy not found, using dummy regulator [ 2.203864] ahci-sunxi 1c18000.sata: 1c18000.sata supply target not found, using dummy regulator [ 2.304122] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 2.311781] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 2.317821] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 2.326964] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 2.336357] scsi host0: ahci-sunxi [ 2.340318] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 28 [ 2.349449] libphy: Fixed MDIO Bus: probed [ 2.354275] tun: Universal TUN/TAP device driver, 1.6 [ 2.359834] CAN device driver interface [ 2.364033] sun4i-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pa not found, using dummy regulator [ 2.374194] sun4i-emac 1c0b000.ethernet: using random MAC address aa:af:07:ec:42:3f [ 2.383922] sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 19 MAC: aa:af:07:ec:42:3f [ 2.393183] usbcore: registered new interface driver r8152 [ 2.398834] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.405502] ehci-platform: EHCI generic platform driver [ 2.411266] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.417638] ohci-platform: OHCI generic platform driver [ 2.423420] usbcore: registered new interface driver uas [ 2.428941] usbcore: registered new interface driver usb-storage [ 2.436469] sunxi-rtc 1c20d00.rtc: registered as rtc0 [ 2.441803] i2c /dev entries driver [ 2.446519] axp20x-i2c 1-0034: AXP20x variant AXP209 found [ 2.455908] random: fast init done [ 2.461958] axp20x-gpio axp20x-gpio: DMA mask not set [ 2.468938] axp20x-gpio axp20x-gpio: AXP209 pinctrl and GPIO driver loaded [ 2.484387] input: axp20x-pek as /devices/platform/soc/1c2ac00.i2c/i2c-1/1-0034/axp20x-pek/input/input0 [ 2.495244] ldo1: supplied by regulator-dummy [ 2.500031] ldo2: supplied by regulator-dummy [ 2.505663] ldo3: supplied by regulator-dummy [ 2.510822] ldo4: supplied by regulator-dummy [ 2.515575] ldo5: supplied by regulator-dummy [ 2.520715] dcdc2: supplied by regulator-dummy [ 2.526030] dcdc3: supplied by regulator-dummy [ 2.531665] axp20x-i2c 1-0034: AXP20X driver loaded [ 2.537029] IR NEC protocol handler initialized [ 2.541686] IR RC5(x/sz) protocol handler initialized [ 2.546858] IR RC6 protocol handler initialized [ 2.551477] IR JVC protocol handler initialized [ 2.556110] IR Sony protocol handler initialized [ 2.566557] IR SANYO protocol handler initialized [ 2.576946] IR Sharp protocol handler initialized [ 2.587350] IR MCE Keyboard/mouse protocol handler initialized [ 2.598940] IR XMP protocol handler initialized [ 2.609160] ir_imon_decoder: IR iMON protocol handler initialized [ 2.620938] IR RCMM protocol handler initialized [ 2.631651] Registered IR keymap rc-empty [ 2.641564] rc rc0: sunxi-ir as /devices/platform/soc/1c21800.ir/rc/rc0 [ 2.654151] input: sunxi-ir as /devices/platform/soc/1c21800.ir/rc/rc0/input1 [ 2.667458] rc rc0: lirc_dev: driver sunxi-ir registered at minor = 0, raw IR receiver, no transmitter [ 2.682857] sunxi-ir 1c21800.ir: initialized sunXi IR driver [ 2.694693] usbcore: registered new interface driver xbox_remote [ 2.707660] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 2.723559] sun4i-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pf not found, using dummy regulator [ 2.740432] sun4i-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-ph not found, using dummy regulator [ 2.756327] sunxi-mmc 1c0f000.mmc: Got CD GPIO [ 2.777231] ata1: SATA link down (SStatus 0 SControl 300) [ 2.801638] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 2048 KB [ 2.815608] hid: raw HID events driver (C) Jiri Kosina [ 2.828001] usbcore: registered new interface driver usbhid [ 2.839795] usbhid: USB HID core driver [ 2.850332] cedrus 1c0e000.video-codec: Device registered as /dev/video0 [ 2.864241] axp20x-adc axp20x-adc: DMA mask not set [ 3.007530] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.024053] mmc0: new high speed SDHC card at address 0007 [ 3.036865] mmcblk0: mmc0:0007 SD8GB 7.42 GiB [ 3.051356] mmcblk0: p1 p2 [ 3.701646] debugfs: Directory '1c22c00.codec' with parent 'sun4i-codec' already present! [ 3.720131] sun4i-codec 1c22c00.codec: Codec <-> 1c22c00.codec mapping ok [ 3.735858] Initializing XFRM netlink socket [ 3.747100] NET: Registered protocol family 10 [ 3.758931] Segment Routing with IPv6 [ 3.768918] NET: Registered protocol family 17 [ 3.779427] can: controller area network core (rev 20170425 abi 9) [ 3.791776] NET: Registered protocol family 29 [ 3.802301] can: raw protocol (rev 20170425) [ 3.812586] can: broadcast manager protocol (rev 20170425 t) [ 3.824288] can: netlink gateway (rev 20190810) max_hops=1 [ 3.836025] Key type dns_resolver registered [ 3.846465] Registering SWP/SWPB emulation handler [ 3.857620] Loading compiled-in X.509 certificates [ 3.924290] libphy: sun4i_mii_bus: probed [ 3.995235] ehci-platform 1c14000.usb: EHCI Host Controller [ 4.006929] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 4.021166] ehci-platform 1c14000.usb: irq 24, io mem 0x01c14000 [ 4.054111] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 4.066258] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05 [ 4.080396] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.093366] usb usb1: Product: EHCI Host Controller [ 4.103950] usb usb1: Manufacturer: Linux 5.5.0 ehci_hcd [ 4.114955] usb usb1: SerialNumber: 1c14000.usb [ 4.125824] hub 1-0:1.0: USB hub found [ 4.135481] hub 1-0:1.0: 1 port detected [ 4.145968] ehci-platform 1c1c000.usb: EHCI Host Controller [ 4.157438] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 4.171424] ehci-platform 1c1c000.usb: irq 29, io mem 0x01c1c000 [ 4.204113] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 4.216122] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05 [ 4.230174] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.243140] usb usb2: Product: EHCI Host Controller [ 4.253730] usb usb2: Manufacturer: Linux 5.5.0 ehci_hcd [ 4.264684] usb usb2: SerialNumber: 1c1c000.usb [ 4.275520] hub 2-0:1.0: USB hub found [ 4.285032] hub 2-0:1.0: 1 port detected [ 4.295603] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 4.308212] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 4.322292] ohci-platform 1c14400.usb: irq 25, io mem 0x01c14400 [ 4.408533] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.05 [ 4.422857] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.435989] usb usb3: Product: Generic Platform OHCI controller [ 4.447865] usb usb3: Manufacturer: Linux 5.5.0 ohci_hcd [ 4.459129] usb usb3: SerialNumber: 1c14400.usb [ 4.470277] hub 3-0:1.0: USB hub found [ 4.480217] hub 3-0:1.0: 1 port detected [ 4.491042] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 4.503889] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 4.518314] ohci-platform 1c1c400.usb: irq 30, io mem 0x01c1c400 [ 4.534118] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 4.598572] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.05 [ 4.613134] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.626463] usb usb4: Product: Generic Platform OHCI controller [ 4.638417] usb usb4: Manufacturer: Linux 5.5.0 ohci_hcd [ 4.649787] usb usb4: SerialNumber: 1c1c400.usb [ 4.661080] hub 4-0:1.0: USB hub found [ 4.670951] usb 2-1: new high-speed USB device number 2 using ehci-platform [ 4.684045] hub 4-0:1.0: 1 port detected [ 4.695660] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=77.64 [ 4.710038] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 4.723127] usb 1-1: Product: USB2.0 Hub [ 4.834863] asoc-simple-card sound: dit-hifi <-> 1c21000.spdif mapping ok [ 4.848454] printk: console [netcon0] enabled [ 4.858893] netconsole: network logging started [ 4.869404] sunxi-rtc 1c20d00.rtc: setting system clock to 2010-01-01T00:00:07 UTC (1262304007) [ 4.884416] ALSA device list: [ 4.893400] #0: sun4i-codec [ 4.902257] #1: On-board SPDIF [ 4.912460] hub 1-1:1.0: USB hub found [ 4.934579] Freeing unused kernel memory: 5120K [ 4.945656] hub 1-1:1.0: 4 ports detected [ 4.955567] Run /init as init process [ 4.966350] usb 2-1: New USB device found, idVendor=0bda, idProduct=8176, bcdDevice= 2.00 [ 4.980619] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.993523] usb 2-1: Product: 802.11n WLAN Adapter [ 5.003979] usb 2-1: Manufacturer: Realtek [ 5.013694] usb 2-1: SerialNumber: 00e04c000001 [ 5.026467] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 5.040015] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 ]--- Connected.